MS-DOS/v2.0/source/DEBMES.ASM

171 lines
5.1 KiB
NASM
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

TITLE DEBUGger Messages
FALSE EQU 0
TRUE EQU NOT FALSE
SYSVER EQU FALSE ;if true, i/o direct to bios
; so DOS can be debugged
IBMJAPVER EQU FALSE ; true for their special parity stuff
.xlist
.xcref
INCLUDE DOSSYM.ASM
.cref
.list
FIRSTDRV EQU "A"
CODE SEGMENT PUBLIC BYTE 'CODE'
CODE ENDS
CONST SEGMENT PUBLIC BYTE
CONST ENDS
DATA SEGMENT PUBLIC BYTE
EXTRN ParityFlag:BYTE
DATA ENDS
DG GROUP CODE,CONST,DATA
CODE SEGMENT PUBLIC BYTE 'CODE'
ASSUME CS:DG,DS:DG,ES:DG,SS:DG
EXTRN RPRBUF:NEAR,RESTART:NEAR
PUBLIC DRVERR, TrapParity, ReleaseParity, NMIInt, NMIIntEnd
TrapParity:
IF IBMJAPVER
PUSH BX
PUSH ES
PUSH DX ; save location of new offset
MOV DX,OFFSET DG:NMIInt ; DS:DX has new interrupt vector
CALL SwapInt ; diddle interrupts
ASSUME ES:NOTHING
MOV WORD PTR [NMIPtr],BX ; save old offset
MOV WORD PTR [NMIPtr+2],ES ; save old segment
POP DX ; get old regs back
POP ES ; restore old values
ASSUME ES:DG
POP BX
MOV BYTE PTR [ParityFlag],0 ; no interrupts detected yet!
RET
SwapInt:
PUSH AX
MOV AX,(Get_interrupt_vector SHL 8) + 2
INT 21h ; get old nmi vector
MOV AX,(Set_Interrupt_Vector SHL 8) + 2
INT 21h ; let OS set new vector
POP AX
ENDIF
RET
ReleaseParity:
IF IBMJAPVER
PUSH DX
PUSH DS
PUSH BX
PUSH ES
LDS DX,DWORD PTR [NMIPtr] ; get old vector
CALL SwapInt ; diddle back to original
POP ES
POP BX
POP DS
POP DX
MOV [ParityFlag],0 ; no interrupts possible!
ENDIF
RET
NMIInt:
IF IBMJAPVER
PUSH AX ; save AX
IN AL,0A0h ; get status register
OR AL,1 ; was there parity check?
POP AX ; get old AX back
JZ NMIChain ; no, go chain interrupt
OUT 0A2h,AL ; reset NMI detector
MOV CS:[ParityFlag],1 ; signal detection
IRET
NMIChain:
JMP DWORD PTR CS:[NMIPtr] ; chain the vectors
NMIPtr DD ? ; where old NMI gets stashed
ENDIF
NMIIntEnd:
DRVERR: MOV DX,OFFSET DG:DISK
OR AL,AL
JNZ SAVDRV
MOV DX,OFFSET DG:WRTPRO
SAVDRV:
PUSH CS
POP DS
PUSH CS
POP ES
ADD BYTE PTR DRVLET,FIRSTDRV
MOV SI,OFFSET DG:READM
MOV DI,OFFSET DG:ERRTYP
CMP BYTE PTR RDFLG,WRITE
JNZ MOVMES
MOV SI,OFFSET DG:WRITM
MOVMES:
MOVSW
MOVSW
CALL RPRBUF
MOV DX,OFFSET DG:DSKERR
JMP RESTART
CODEEND:
CODE ENDS
CONST SEGMENT PUBLIC BYTE
PUBLIC BADVER,ENDMES,CARRET,NAMBAD,NOTFND,NOROOM
PUBLIC NOSPACE,DRVLET
PUBLIC ACCMES
PUBLIC TOOBIG,SYNERR,ERRMES,BACMES
PUBLIC EXEBAD,HEXERR,EXEWRT,HEXWRT,WRTMES1,WRTMES2
PUBLIC EXECEMES, ParityMes
EXTRN RDFLG:BYTE
IF SYSVER
PUBLIC BADDEV,BADLSTMES
BADDEV DB "Bad device name",13,10,"$"
BADLSTMES DB "Couldn't open list device PRN",13,10
DB "Enter name of list device? $"
ENDIF
BADVER DB "Incorrect DOS version",13,10,"$"
ENDMES DB 13,10,"Program terminated normally"
CARRET DB 13,10,"$"
NAMBAD DB "Invalid drive specification",13,10,"$"
NOTFND DB "File not found",13,10,"$"
NOROOM DB "File creation error",13,10,"$"
NOSPACE DB "Insufficient space on disk",13,10,"$"
DISK DB "Disk$"
WRTPRO DB "Write protect$"
DSKERR DB " error "
ERRTYP DB "reading drive "
DRVLET DB "A",13,10,"$"
READM DB "read"
WRITM DB "writ"
TOOBIG DB "Insufficient memory",13,10,"$"
SYNERR DB '^'
ERRMES DB " Error",13,10+80H
BACMES DB 32,8+80H
EXEBAD LABEL BYTE
HEXERR DB "Error in EXE or HEX file",13,10,"$"
EXEWRT LABEL BYTE
HEXWRT DB "EXE and HEX files cannot be written",13,10,"$"
WRTMES1 DB "Writing $"
WRTMES2 DB " bytes",13,10,"$"
EXECEMES DB "EXEC failure",13,10,"$"
ACCMES DB "Access denied",13,10,"$"
ParityMes DB "Parity error or nonexistant memory error detected",13,10,"$"
CONSTEND:
CONST ENDS
END