MS-DOS/v2.0/source/PRINT.ASM

1645 lines
47 KiB
NASM
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

;MS-DOS PRINT program for background printing of text files to the list
; device. INT 28H is a software interrupt generated by the DOS
; in its I/O wait loops. This spooler can be assembled for
; operation using only this interrupt which is portable from
; system to system. It may also be assembled to use a hardware
; timer interrupt in addition to the software INT 28H. The
; purpose of using hardware interrupts is to allow printing to
; continue during programs which do not enter the system and
; therefore causes the INT 28H to go away. A timer interrupt is
; chosen in preference to a "printer buffer empty" interrupt
; because PRINT in the timer form is generic. It can be given
; the name of any currently installed character device as the
; "printer", this makes it portable to devices which are
; installed by the user even in the hardware case. It could be
; modified to use a buffer empty interrupt (no code is given for
; this case), if this is done the PROMPT and BADMES messages and
; their associated code should be removed as PRINT will then be
; device specific.
;
; VERSION 1.00 07/03/82
FALSE EQU 0
TRUE EQU NOT FALSE
IBM EQU FALSE
IBMVER EQU IBM
MSVER EQU TRUE
IF MSVER
HARDINT EQU FALSE ;No hardware ints
AINT EQU FALSE ;No need to do interrupt acknowledge
ENDIF
IF IBM
HARDINT EQU TRUE
INTLOC EQU 1CH ;Hardware interrupt location (Timer)
AINT EQU TRUE ;Acknowledge interrupts
EOI EQU 20H ;End Of Interrupt "instruction"
AKPORT EQU 20H ;Interrupt Acknowledge port
ENDIF
;The following values have to do with the ERRCNT variable and the
; CNTMES message. The values define levels at wich it is assumed
; an off-line error exists. ERRCNT1 defines the value of ERRCNT above
; which the CNTMES message is printed by the transient. ERRCNT2
; defines the value of ERRCNT above which the resident will give up
; trying to print messages on the printer, it is much greater than
; ERRCNT1 because a much tighter loop is involved. The bounding event
; which determines the correct value is the time required to do a
; form feed.
IF IBM
ERRCNT1 EQU 1000
ERRCNT2 EQU 20000
ELSE
ERRCNT1 EQU 1000
ERRCNT2 EQU 20000
ENDIF
IF HARDINT
TIMESLICE EQU 8 ;The PRINT scheduling time slice. PRINT
; lets this many "ticks" go by before
; using a time slice to pump out characters.
; Setting this to 3 for instance means PRINT
; Will skip 3 slices, then take the fourth.
; Thus using up 1/4 of the CPU. Setting it
; to one gives PRINT 1/2 of the CPU.
; The above examples assume MAXTICK is
; 1. The actual PRINT CPU percentage is
; (MAXTICK/(1+TIMESLICE))*100
MAXTICK EQU 2 ;The PRINT in timeslice. PRINT will pump
; out characters for this many clock ticks
; and then exit. The selection of a value
; for this is dependent on the timer rate.
BUSYTICK EQU 1 ;If PRINT sits in a wait loop waiting for
; output device to come ready for this
; many ticks, it gives up its time slice.
; Setting it greater than or equal to
; MAXTICK causes it to be ignored.
;User gets TIMESLICE ticks and then PRINT takes MAXTICK ticks unless BUSYTICK
; ticks go by without getting a character out.
ENDIF
;WARNING DANGER WARNING:
; PRINT is a systems utility. It is clearly understood that it may have
; to be entirely re-written for future versions of MS-DOS. The following
; TWO vectors are version specific, they may not exist at all in future
; versions. If they do exist, they may function differently.
; ANY PROGRAM WHICH IMITATES PRINTS USE OF THESE VECTORS IS ALSO A SYSTEMS
; UTILITY AND IS THEREFORE NOT VERSION PORTABLE IN ANY WAY SHAPE OR FORM.
; YOU HAVE BEEN WARNED, "I DID IT THE SAME WAY PRINT DID" IS NOT AN REASON
; TO EXPECT A PROGRAM TO WORK ON FUTURE VERSIONS OF MS-DOS.
SOFTINT EQU 28H ;Software interrupt generated by DOS
COMINT EQU 2FH ;Communications interrupt used by PRINT
; This vector number is DOS reserved. It
; is not generally available to programs
; other than PRINT.
BLKSIZ EQU 512 ;Size of the PRINT I/O block in bytes
FCBSIZ EQU 40 ;Size of an FCB
INCLUDE DOST:DOSSYM.ASM
FCB EQU 5CH
PARMS EQU 80H
DG GROUP CODE,DATA
CODE SEGMENT
ASSUME CS:DG
ORG 100H
START:
JMP TRANSIENT
HEADER DB "Vers 1.00"
DB 128 DUP (?)
ISTACK LABEL WORD ;Stack starts here and grows down
;Resident data
IF HARDINT
INDOS DD ? ;DOS buisy flag
NEXTINT DD ? ;Chain for int
BUSY DB 0 ;Internal ME flag
SOFINT DB 0 ;Internal ME flag
TICKCNT DB 0 ;Tick counter
TICKSUB DB 0 ;Tick miss counter
SLICECNT DB TIMESLICE ;Time slice counter
ENDIF
CBUSY DB 0 ;ME on com interrupt
SPNEXT DD ? ;Chain location for INT 28
PCANMES DB 0 ;Cancel message flag
SSsave DW ? ;Stack save area for INT 24
SPsave DW ?
DMAADDR DD ? ;Place to save DMA address
HERRINT DD ? ;Place to save Hard error interrupt
LISTDEV DD ? ;Pointer to Device
COLPOS DB 0 ;Column position for TAB processing
NXTCHR DW OFFSET DG:BUFFER + BLKSIZ ;Buffer pointer
CURRFIL DW OFFSET DG:SPLFCB ;Current file being printed
LASTFCB DW ? ;Back pointer
LASTFCB2 DW ? ;Another back pointer
PABORT DB 0 ;Abort flag
;Resident messages
ERRMES DB 13,10,13,10,"**********",13,10,"$"
ERRMEST DB " error reading file",13,10
EMFILNAM DB " : . "
BELMES DB 13,0CH,7,"$"
CANMES DB 13,10,13,10
CANFILNAM DB " : . "
DB " Canceled by operator$"
ALLCAN DB 13,10,13,10,"All files canceled by operator$"
MESBAS DW OFFSET DG:ERR0
DW OFFSET DG:ERR1
DW OFFSET DG:ERR2
DW OFFSET DG:ERR3
DW OFFSET DG:ERR4
DW OFFSET DG:ERR5
DW OFFSET DG:ERR6
DW OFFSET DG:ERR7
DW OFFSET DG:ERR8
DW OFFSET DG:ERR9
DW OFFSET DG:ERR10
DW OFFSET DG:ERR11
DW OFFSET DG:ERR12
;INT 24 messages A La COMMAND
ERR0 DB "Write protect$"
ERR1 DB "Bad unit$"
ERR2 DB "Not ready$"
ERR3 DB "Bad command$"
ERR4 DB "Data$"
ERR5 DB "Bad call format$"
ERR6 DB "Seek$"
ERR7 DB "Non-DOS disk$"
ERR8 DB "Sector not found$"
ERR9 DB "No paper$"
ERR10 DB "Write fault$"
ERR11 DB "Read fault$"
ERR12 DB "Disk$"
FATMES DB "File allocation table bad drive "
BADDRVM DB "A.",13,10,"$"
;The DATA buffer
BUFFER DB BLKSIZ DUP(0)
DB ?
CODE ENDS
;Transient data
DATA SEGMENT BYTE
ORG 0
SWITCHAR DB ? ;User switch character
FULLFLAG DB 0 ;Flag for printing queue full message
MAKERES DB 0 ;Flag to indicate presence of resident
ARGSETUP DB 0 ;Flag to indicate a formatted FCB exists at 5C
DEFDRV DB 0 ;Default drive
CANFLG DB 0 ;Flag to indicate cancel
FILCNT DB 0 ;Number of files
SPLIST DD ? ;Pointer to FCBs in resident
CURFILE DD ? ;Pointer to current FCB
SRCHFCB DB 38 DUP (0) ;SEARCH-FIRST/NEXT FCB
ENDRES DW OFFSET DG:DEF_ENDRES ;Term-Res location
;Messages
NOFILS DB "PRINT queue is empty",13,10,"$"
CURMES DB 13,10," "
CURFNAM DB " : . is currently being printed",13,10,"$"
FILMES DB " "
FILFNAM DB " : . is in queue"
CRLF DB 13,10,"$"
OPMES DB "Cannot open "
OPFILNAM DB " : . ",13,10,"$"
FULLMES DB "PRINT queue is full",13,10,"$"
SRCHMES LABEL BYTE
SRCHFNAM DB " : . "," File not found",13,10,"$"
BADMES DB "List output is not assigned to a device",13,10,"$"
GOODMES DB "Resident part of PRINT installed",13,10,"$"
PROMPT DB "Name of list device [PRN]: $"
CNTMES DB "Errors on list device indicate that it",13,10
DB "may be off-line. Please check it.",13,10,13,10,"$"
BADSWT DB "Invalid parameter",13,10,"$"
BADVER DB "Incorrect DOS version",13,10,"$"
IF IBM
;Reserved names for parallel card
INT_17_HITLIST LABEL BYTE
DB 8,"PRN ",0
DB 8,"LPT1 ",0
DB 8,"LPT2 ",1
DB 8,"LPT3 ",2
DB 0
;Reserved names for Async adaptor
INT_14_HITLIST LABEL BYTE
DB 8,"AUX ",0
DB 8,"COM1 ",0
DB 8,"COM2 ",1
DB 0
ENDIF
COMBUF DB 14,0 ;Device name buffer
DB 14 DUP (?)
LISTFCB DB 0,"PRN " ;Device name FCB
DB 25 DUP (0)
PARSEBUF DB 80 DUP (?) ;Parsing space
DATA ENDS
CODE SEGMENT
ASSUME CS:DG,DS:DG,ES:DG,SS:DG
;Interrupt routines
ASSUME CS:DG,DS:NOTHING,ES:NOTHING,SS:NOTHING
IF HARDINT
HDSPINT: ;Hardware interrupt entry point
INC [TICKCNT] ;Tick
INC [TICKSUB] ;Tick
CMP [SLICECNT],0
JZ TIMENOW
DEC [SLICECNT] ;Count down
JMP SHORT CHAININT ;Not time yet
TIMENOW:
CMP [BUSY],0 ;See if interrupting ourself
JNZ CHAININT
PUSH DS
PUSH SI
LDS SI,[INDOS] ;Check for making DOS calls
CMP BYTE PTR [SI],0
POP SI
POP DS
JNZ CHAININT ;DOS is Buisy
INC [BUSY] ;Exclude furthur interrupts
MOV [TICKCNT],0 ;Reset tick counter
MOV [TICKSUB],0 ;Reset tick counter
STI ;Keep things rolling
IF AINT
MOV AL,EOI ;Acknowledge interrupt
OUT AKPORT,AL
ENDIF
CALL DOINT
CLI
MOV [SLICECNT],TIMESLICE ;Either soft or hard int resets time slice
MOV [BUSY],0 ;Done, let others in
CHAININT:
JMP [NEXTINT] ;Chain to next clock routine
ENDIF
SPINT: ;INT 28H entry point
IF HARDINT
CMP [BUSY],0
JNZ NXTSP
INC [BUSY] ;Exclude hardware interrupt
INC [SOFINT] ;Indicate a software int in progress
ENDIF
STI ;Hardware interrupts ok on INT 28H entry
CALL DOINT
IF HARDINT
CLI
MOV [SOFINT],0 ;Indicate INT done
MOV [SLICECNT],TIMESLICE ;Either soft or hard int resets time slice
MOV [BUSY],0
ENDIF
NXTSP: JMP [SPNEXT] ;Chain to next INT 28
DOINT:
PUSH SI
MOV SI,[CURRFIL]
INC SI
INC SI
CMP BYTE PTR CS:[SI],-1
POP SI
JNZ GOAHEAD
JMP SPRET ;Nothing to do
GOAHEAD:
PUSH AX ;Need a working register
MOV [SSsave],SS
MOV [SPsave],SP
MOV AX,CS
CLI
;Go to internal stack to prevent INT 24 overflowing system stack
MOV SS,AX
MOV SP,OFFSET DG:ISTACK
STI
PUSH ES
PUSH DS
PUSH BX
PUSH CX
PUSH DX
PUSH SI
PUSH DI
PUSH CS
POP DS
ASSUME DS:DG
MOV BX,[NXTCHR]
CMP BX,OFFSET DG:BUFFER + BLKSIZ
JNZ PLOOP
JMP READBUFF ;Buffer empty
PLOOP:
IF HARDINT
MOV BX,[NXTCHR]
CMP BX,OFFSET DG:BUFFER + BLKSIZ
JZ DONEJMP ;Buffer has become empty
CMP [SOFINT],0
JNZ STATCHK
CMP [TICKCNT],MAXTICK ;Check our time slice
JAE DONEJMP
STATCHK:
ENDIF
CALL PSTAT
IF HARDINT
JZ DOCHAR ;Printer ready
CMP [SOFINT],0
ENDIF
JNZ DONEJMP ;If soft int give up
IF HARDINT
CMP [TICKSUB],BUSYTICK ;Check our busy timeout
JAE DONEJMP
JMP PLOOP
ENDIF
DOCHAR:
MOV AL,BYTE PTR [BX]
CMP AL,1AH ;^Z?
JZ FILEOFJ ;CPM EOF
CMP AL,0DH ;CR?
JNZ NOTCR
MOV [COLPOS],0
NOTCR:
CMP AL,9 ;TAB?
JNZ NOTABDO
MOV CL,[COLPOS]
OR CL,0F8H
NEG CL
XOR CH,CH
JCXZ TABDONE
TABLP:
MOV AL," "
INC [COLPOS]
PUSH CX
CALL POUT
POP CX
LOOP TABLP
JMP TABDONE
NOTABDO:
CMP AL,8 ;Back space?
JNZ NOTBACK
DEC [COLPOS]
NOTBACK:
CMP AL,20H ;Non Printing char?
JB NOCHAR
INC [COLPOS] ;Printing char
NOCHAR:
CALL POUT ;Print it
TABDONE:
INC [NXTCHR] ;Next char
IF HARDINT
MOV [TICKSUB],0 ;Got a character out, Reset counter
CMP [SOFINT],0 ;Soft int does one char at a time
JZ PLOOP
ENDIF
DONEJMP:
POP DI
POP SI
POP DX
POP CX
POP BX
POP DS
POP ES
ASSUME DS:NOTHING,ES:NOTHING
CLI
MOV SS,[SSsave] ;Restore Entry Stack
MOV SP,[SPsave]
STI
POP AX
SPRET:
RET
FILEOFJ: JMP FILEOF
READBUFF:
ASSUME DS:DG,ES:NOTHING
MOV AL,24H
MOV AH,GET_INTERRUPT_VECTOR
INT 21H
MOV WORD PTR [HERRINT+2],ES ;Save current vector
MOV WORD PTR [HERRINT],BX
MOV DX,OFFSET DG:DSKERR
MOV AL,24H
MOV AH,SET_INTERRUPT_VECTOR ;Install our own
INT 21H ;Spooler must catch its errors
MOV AH,GET_DMA
INT 21H
MOV WORD PTR [DMAADDR+2],ES ;Save DMA address
MOV WORD PTR [DMAADDR],BX
MOV DX,OFFSET DG:BUFFER
MOV AH,SET_DMA
INT 21H ;New DMA address
MOV [PABORT],0 ;No abort
MOV DX,[CURRFIL] ;Read
INC DX
INC DX ;Skip over pointer
MOV AH,FCB_SEQ_READ
INT 21H
PUSH AX
LDS DX,[DMAADDR]
ASSUME DS:NOTHING
MOV AH,SET_DMA
INT 21H ;Restore DMA
LDS DX,[HERRINT]
MOV AL,24H
MOV AH,SET_INTERRUPT_VECTOR
INT 21H ;Restore Error INT
POP AX
PUSH CS
POP DS
ASSUME DS:DG
CMP [PABORT],0
JNZ TONEXTFIL ;Barf on this file, got INT 24
CMP AL,01
JZ FILEOF ;Read EOF?
MOV BX,OFFSET DG:BUFFER ;Buffer full
MOV [NXTCHR],BX
JMP DONEJMP
FILEOF:
MOV AL,0CH ;Form feed
CALL LOUT
TONEXTFIL:
CALL NEXTFIL
JMP DONEJMP
;INT 24 handler
DSKERR:
ASSUME DS:NOTHING,ES:NOTHING,SS:NOTHING
STI
CMP [PABORT],0
JNZ IGNRET
PUSH BX
PUSH CX
PUSH DX
PUSH DI
PUSH SI
PUSH BP
PUSH ES
PUSH DS
PUSH CS
POP DS
PUSH CS
POP ES
ASSUME DS:DG,ES:DG
ADD [BADDRVM],AL ;Set correct drive letter
MOV SI,OFFSET DG:ERRMES
CALL LISTMES
TEST AH,080H
JNZ FATERR
AND DI,0FFH
CMP DI,12
JBE HAVCOD
MOV DI,12
HAVCOD:
SHL DI,1
MOV DI,WORD PTR [DI+MESBAS] ; Get pointer to error message
MOV SI,DI
CALL LISTMES ; Print error type
MOV DI,OFFSET DG:EMFILNAM
MOV SI,[CURRFIL]
ADD SI,2 ;Get to file name
LODSB
ADD AL,'@'
STOSB
INC DI
MOV CX,4
REP MOVSW
INC DI
MOVSW
MOVSB
MOV SI,OFFSET DG:ERRMEST
CALL LISTMES
SETABORT:
INC [PABORT] ;Indicate abort
POP DS
POP ES
POP BP
POP SI
POP DI
POP DX
POP CX
POP BX
IGNRET:
XOR AL,AL ;Ignore
IRET
FATERR:
MOV SI,OFFSET DG:FATMES
CALL LISTMES
JMP SHORT SETABORT
ADDFILJ: JMP ADDFIL
COMBUSY:
MOV AX,-1
IRET
;Communications interrupt
SPCOMINT:
ASSUME DS:NOTHING,ES:NOTHING,SS:NOTHING
CMP [CBUSY],0
JNZ COMBUSY
INC [CBUSY] ;Exclude
STI ;Turn ints back on
PUSH SI
PUSH DI
PUSH CX
PUSH DS
PUSH CS
POP DS
ASSUME DS:DG
MOV [PCANMES],0 ;Havn't printed cancel message
OR AH,AH
JZ ADDFILJ ;Add file
CMP AH,1
JZ CANFIL ;Cancel File(s)
XOR AL,AL
SETCOUNT:
PUSH AX ;Save AL return code
XOR AH,AH
MOV SI,OFFSET DG:SPLFCB
MOV CX,[NUMFCBS]
CNTFILS:
CMP BYTE PTR [SI+2],-1 ;Valid?
JZ LNEXT
INC AH
LNEXT:
ADD SI,FCBSIZ
LOOP CNTFILS
COMRET:
MOV BX,OFFSET DG:SPLFCB
MOV DX,[CURRFIL]
PUSH DS
POP ES
ASSUME ES:NOTHING
MOV CH,AH
POP AX ;Get AL return
MOV AH,CH
IF HARDINT
BWAIT3:
CMP [BUSY],0
JNZ BWAIT3
INC [BUSY]
ENDIF
CALL PSTAT ; Tweek error counter
IF HARDINT
MOV [BUSY],0
ENDIF
POP DS
ASSUME DS:NOTHING
POP CX
POP DI
POP SI
MOV [CBUSY],0
IRET
DELALLJ: JMP DELALL
CANFIL:
ASSUME DS:DG,ES:NOTHING
MOV CX,[NUMFCBS]
IF HARDINT
BWAIT:
CMP [BUSY],0
JNZ BWAIT
INC [BUSY]
ENDIF
MOV SI,[CURRFIL]
CMP DX,-1
JZ DELALLJ
MOV BX,[SI]
PUSH BX
LOOKEND: ;Set initial pointer values
CMP BX,SI
JZ GOTLAST
POP AX
PUSH BX
MOV BX,[BX]
JMP SHORT LOOKEND
GOTLAST:
POP BX
MOV [LASTFCB],BX
MOV [LASTFCB2],BX
POP ES
PUSH ES
MOV BX,SI
LOOKMATCH:
MOV DI,DX
ADD SI,2 ;Skip pointer
CMP BYTE PTR [SI],-1
JZ CANTERMJ ;No more
CMPSB
JNZ SKIPFIL ;DRIVE
PUSH CX
MOV CX,11
NXTCHAR:
MOV AL,ES:[DI]
INC DI
CALL UPCONV
MOV AH,AL
LODSB
CALL UPCONV
CMP AH,"?" ;Wild card?
JZ NXTCHRLP ;Yes
CMP AH,AL
JNZ SKIPFILC
NXTCHRLP:
LOOP NXTCHAR
MATCH:
POP CX
MOV AH,-1
XCHG AH,[BX+2] ;Zap it
CMP BX,[CURRFIL] ;Is current file?
JNZ REQUEUE ;No
MOV AL,1
XCHG AL,[PCANMES]
OR AL,AL
JNZ DIDCMES ;Only print cancel message once
PUSH ES
PUSH CS
POP ES
MOV DI,OFFSET DG:CANFILNAM
MOV SI,BX
ADD SI,3 ;Get to file name
MOV AL,AH
ADD AL,'@'
STOSB
INC DI
MOV CX,4
REP MOVSW
INC DI
MOVSW
MOVSB
POP ES
MOV SI,OFFSET DG:CANMES
CALL LISTMES
MOV SI,OFFSET DG:BELMES
CALL LISTMES
DIDCMES:
PUSH CX
CALL NEXTFIL
SKIPFILC:
POP CX
SKIPFIL:
MOV [LASTFCB2],BX
MOV BX,[BX]
NEXTFC:
MOV SI,BX
LOOP LOOKMATCH
CANTERMJ: JMP SHORT CANTERM
REQUEUE:
MOV AX,[BX]
CMP AX,[CURRFIL] ;Is last FCB?
JZ SKIPFIL ;Yes, is in right place
MOV SI,[LASTFCB2]
MOV [SI],AX ;Unlink FCB
MOV SI,[CURRFIL]
MOV [BX],SI
MOV SI,[LASTFCB]
MOV [SI],BX ;Link FCB at end
MOV [LASTFCB],BX ;New end
MOV BX,AX ;Process what it pointed to
JMP SHORT NEXTFC
DELALL:
CMP BYTE PTR CS:[SI+2],-1 ;Examine current file
DELALL2:
MOV BYTE PTR [SI+2],-1 ;Zap it
MOV SI,[SI]
LOOP DELALL2
JZ CANTERM1 ;No message if nothing was in progress
MOV SI,OFFSET DG:ALLCAN
CALL LISTMES
MOV SI,OFFSET DG:BELMES
CALL LISTMES
CANTERM1:
MOV [NXTCHR],OFFSET DG:BUFFER + BLKSIZ ;Buffer empty
CANTERM:
IF HARDINT
MOV [BUSY],0
ENDIF
XOR AX,AX
JMP SETCOUNT
UPCONV:
CMP AL,'a'
JB NOCONV
CMP AL,'z'
JA NOCONV
SUB AL,20H
NOCONV:
RET
ADDFIL:
ASSUME DS:DG,ES:NOTHING
MOV SI,[CURRFIL]
MOV CX,[NUMFCBS]
IF HARDINT
BWAIT2:
CMP [BUSY],0
JNZ BWAIT2
INC [BUSY]
ENDIF
LOOKSPOT:
CMP BYTE PTR [SI+2],-1
JZ GOTSPOT
MOV SI,[SI]
LOOP LOOKSPOT
IF HARDINT
MOV [BUSY],0
ENDIF
MOV AL,1
JMP SETCOUNT
GOTSPOT:
PUSH DS
POP ES
POP DS
PUSH DS
ASSUME DS:NOTHING
PUSH SI
MOV DI,SI
ADD DI,2
MOV SI,DX
MOV CX,19
REP MOVSW ;Copy in and set FCB
POP SI
PUSH ES
POP DS
ASSUME DS:DG
MOV WORD PTR [SI+2+fcb_EXTENT],0
MOV BYTE PTR [SI+2+fcb_NR],0
MOV WORD PTR [SI+2+fcb_RECSIZ],BLKSIZ
IF HARDINT
MOV [BUSY],0
ENDIF
XOR AL,AL
JMP SETCOUNT
NEXTFIL:
ASSUME DS:DG,ES:NOTHING
MOV SI,[CURRFIL]
MOV BYTE PTR [SI+2],-1 ;Done with current file
MOV SI,[SI]
MOV [CURRFIL],SI
MOV [NXTCHR],OFFSET DG:BUFFER + BLKSIZ ;Buffer empty
MOV [COLPOS],0 ;Start of line
RET
LISTMES:
ASSUME DS:DG,ES:NOTHING
LODSB
CMP AL,"$"
JZ LMESDONE
CALL LOUT
JMP LISTMES
LMESDONE:
RET
LOUT:
PUSH BX
LWAIT:
CALL PSTAT
JZ PREADY
CMP [ERRCNT],ERRCNT2
JA POPRET ;Don't get stuck
JMP SHORT LWAIT
PREADY:
CALL POUT
POPRET:
POP BX
RET
;Stuff for BIOS interface
IOBUSY EQU 0200H
IOERROR EQU 8000H
BYTEBUF DB ?
CALLAD DD ?
IOCALL DB 22
DB 0
IOREQ DB ?
IOSTAT DW 0
DB 8 DUP(?)
DB 0
DW OFFSET DG:BYTEBUF
INTSEG DW ?
IOCNT DW 1
DW 0
PSTAT:
ASSUME DS:DG
PUSH BX
INC [ERRCNT]
MOV BL,10
CALL DOCALL
TEST [IOSTAT],IOERROR
JZ NOSTATERR
OR [IOSTAT],IOBUSY ;If error, show buisy
NOSTATERR:
TEST [IOSTAT],IOBUSY
JNZ RET13P ;Shows buisy
MOV [ERRCNT],0
RET13P:
POP BX
RET
POUT:
ASSUME DS:DG
MOV [BYTEBUF],AL
MOV BL,8
DOCALL:
PUSH ES
MOV [IOREQ],BL
MOV BX,CS
MOV ES,BX
MOV BX,OFFSET DG:IOCALL
MOV [IOSTAT],0
MOV [IOCNT],1
PUSH DS
PUSH SI
PUSH AX
LDS SI,[LISTDEV]
ASSUME DS:NOTHING
MOV AX,[SI+6]
MOV WORD PTR [CALLAD],AX
CALL [CALLAD]
MOV AX,[SI+8]
MOV WORD PTR [CALLAD],AX
CALL [CALLAD]
POP AX
POP SI
POP DS
ASSUME DS:DG
POP ES
RET
IF IBM
REAL_INT_13 DD ?
INT_13_RETADDR DW OFFSET DG:INT_13_BACK
INT_13 PROC FAR
ASSUME DS:NOTHING,ES:NOTHING,SS:NOTHING
PUSHF
INC [BUSY] ;Exclude if dumb program call ROM
PUSH CS
PUSH [INT_13_RETADDR]
PUSH WORD PTR [REAL_INT_13+2]
PUSH WORD PTR [REAL_INT_13]
RET
INT_13 ENDP
INT_13_BACK PROC FAR
PUSHF
DEC [BUSY]
POPF
RET 2 ;Chuck saved flags
INT_13_BACK ENDP
ENDIF
IF IBM
REAL_INT_5 DD ?
REAL_INT_17 DD ?
INT_17_NUM DW 0
INT_17:
ASSUME DS:NOTHING,ES:NOTHING,SS:NOTHING
PUSH SI
MOV SI,[CURRFIL]
INC SI
INC SI
CMP BYTE PTR CS:[SI],-1
POP SI
JZ DO_INT_17 ;Nothing pending, so OK
CMP DX,[INT_17_NUM]
JNZ DO_INT_17 ;Not my unit
CMP [BUSY],0
JNZ DO_INT_17 ;You are me
STI
MOV AH,0A1H ;You are bad, get out of paper
IRET
DO_INT_17:
JMP [REAL_INT_17] ;Do a 17
REAL_INT_14 DD ?
INT_14_NUM DW 0
INT_14:
ASSUME DS:NOTHING,ES:NOTHING,SS:NOTHING
PUSH SI
MOV SI,[CURRFIL]
INC SI
INC SI
CMP BYTE PTR CS:[SI],-1
POP SI
JZ DO_INT_14 ;Nothing pending, so OK
CMP DX,[INT_14_NUM]
JNZ DO_INT_14 ;Not my unit
CMP [BUSY],0
JNZ DO_INT_14 ;You are me
STI
OR AH,AH
JZ SET14_AX
CMP AH,2
JBE SET14_AH
SET14_AX:
MOV AL,0
SET14_AH:
MOV AH,80H ;Time out
IRET
DO_INT_14:
JMP [REAL_INT_14] ;Do a 14
INT_5:
ASSUME DS:NOTHING,ES:NOTHING,SS:NOTHING
PUSH SI
MOV SI,[CURRFIL]
INC SI
INC SI
CMP BYTE PTR CS:[SI],-1
POP SI
JZ DO_INT_5 ;Nothing pending, so OK
CMP [INT_17_NUM],0
JNZ DO_INT_5 ;Only care about unit 0
IRET ;Pretend it worked
DO_INT_5:
JMP [REAL_INT_5] ;Do a 5
ENDIF
;The following data is order and position dependant
NUMFCBS DW 10
ERRCNT DW 0
SPLFCB DW OFFSET DG:FC1
DB (FCBSIZ - 2) DUP (-1)
FC1 DW OFFSET DG:FC2
DB (FCBSIZ - 2) DUP (-1)
FC2 DW OFFSET DG:FC3
DB (FCBSIZ - 2) DUP (-1)
FC3 DW OFFSET DG:FC4
DB (FCBSIZ - 2) DUP (-1)
FC4 DW OFFSET DG:FC5
DB (FCBSIZ - 2) DUP (-1)
FC5 DW OFFSET DG:FC6
DB (FCBSIZ - 2) DUP (-1)
FC6 DW OFFSET DG:FC7
DB (FCBSIZ - 2) DUP (-1)
FC7 DW OFFSET DG:FC8
DB (FCBSIZ - 2) DUP (-1)
FC8 DW OFFSET DG:FC9
DB (FCBSIZ - 2) DUP (-1)
FC9 DW OFFSET DG:SPLFCB
DB (FCBSIZ - 2) DUP (-1)
DEF_ENDRES LABEL BYTE
ASSUME CS:DG,DS:DG,ES:DG,SS:DG
BADSPOOL:
MOV DX,OFFSET DG:BADMES
MOV AH,STD_CON_STRING_OUTPUT
INT 21H
INT 20H
SETUP:
;Called once to install resident
CLD
MOV [INTSEG],CS
MOV DX,OFFSET DG:PROMPT
MOV AH,STD_CON_STRING_OUTPUT
INT 21H
MOV DX,OFFSET DG:COMBUF
MOV AH,STD_CON_STRING_INPUT
INT 21H ;Get device name
MOV DX,OFFSET DG:CRLF
MOV AH,STD_CON_STRING_OUTPUT
INT 21H
MOV CL,[COMBUF+1]
OR CL,CL
JZ DEFSPOOL ;User didn't specify one
XOR CH,CH
MOV DI,OFFSET DG:LISTFCB + 1
MOV SI,OFFSET DG:COMBUF + 2
REP MOVSB
DEFSPOOL:
MOV DX,OFFSET DG:LISTFCB
MOV AH,FCB_OPEN
INT 21H
OR AL,AL
JNZ BADSPOOL ;Bad
TEST BYTE PTR [LISTFCB.fcb_DEVID],080H
JZ BADSPOOL ;Must be a device
LDS SI,DWORD PTR [LISTFCB.fcb_FIRCLUS]
ASSUME DS:NOTHING
MOV WORD PTR [CALLAD+2],DS ;Get I/O routines
MOV WORD PTR [LISTDEV+2],DS ;Get I/O routines
MOV WORD PTR [LISTDEV],SI
PUSH CS
POP DS
ASSUME DS:DG
MOV DX,OFFSET DG:SPINT
MOV AL,SOFTINT
MOV AH,GET_INTERRUPT_VECTOR
INT 21H ;Get soft vector
MOV WORD PTR [SPNEXT+2],ES
MOV WORD PTR [SPNEXT],BX
MOV AL,SOFTINT
MOV AH,SET_INTERRUPT_VECTOR
INT 21H ;Set soft vector
MOV DX,OFFSET DG:SPCOMINT
MOV AL,COMINT
MOV AH,SET_INTERRUPT_VECTOR ;Set communication vector
INT 21H
IF IBM
MOV AL,13H
MOV AH,GET_INTERRUPT_VECTOR
INT 21H
MOV WORD PTR [REAL_INT_13+2],ES
MOV WORD PTR [REAL_INT_13],BX
MOV DX,OFFSET DG:INT_13
MOV AL,13H
MOV AH,SET_INTERRUPT_VECTOR
INT 21H ;Set diskI/O interrupt
MOV AL,17H
MOV AH,GET_INTERRUPT_VECTOR
INT 21H
MOV WORD PTR [REAL_INT_17+2],ES
MOV WORD PTR [REAL_INT_17],BX
MOV AL,14H
MOV AH,GET_INTERRUPT_VECTOR
INT 21H
MOV WORD PTR [REAL_INT_14+2],ES
MOV WORD PTR [REAL_INT_14],BX
MOV AL,5H
MOV AH,GET_INTERRUPT_VECTOR
INT 21H
MOV WORD PTR [REAL_INT_5+2],ES
MOV WORD PTR [REAL_INT_5],BX
PUSH CS
POP ES
MOV BP,OFFSET DG:LISTFCB + 1
MOV SI,BP
MOV CX,8
CONLP: ;Make sure device name in upper case
LODSB
CMP AL,'a'
JB DOCONLP
CMP AL,'z'
JA DOCONLP
SUB BYTE PTR [SI-1],20H
DOCONLP:
LOOP CONLP
MOV DI,OFFSET DG:INT_17_HITLIST
CHKHIT:
MOV SI,BP
MOV CL,[DI]
INC DI
JCXZ NOTONHITLIST
REPE CMPSB
LAHF
ADD DI,CX ;Bump to next position without affecting flags
MOV BL,[DI] ;Get device number
INC DI
SAHF
JNZ CHKHIT
XOR BH,BH
MOV [INT_17_NUM],BX
MOV DX,OFFSET DG:INT_17
MOV AL,17H
MOV AH,SET_INTERRUPT_VECTOR
INT 21H ;Set printer interrupt
MOV DX,OFFSET DG:INT_5
MOV AL,5H
MOV AH,SET_INTERRUPT_VECTOR
INT 21H ;Set print screen interrupt
JMP SHORT ALLSET
NOTONHITLIST:
MOV DI,OFFSET DG:INT_14_HITLIST
CHKHIT2:
MOV SI,BP
MOV CL,[DI]
INC DI
JCXZ ALLSET
REPE CMPSB
LAHF
ADD DI,CX ;Bump to next position without affecting flags
MOV BL,[DI] ;Get device number
INC DI
SAHF
JNZ CHKHIT2
XOR BH,BH
MOV [INT_14_NUM],BX
MOV DX,OFFSET DG:INT_14
MOV AL,14H
MOV AH,SET_INTERRUPT_VECTOR
INT 21H ;Set RS232 port interrupt
ALLSET:
ENDIF
IF HARDINT
MOV AH,GET_INDOS_FLAG
INT 21H
MOV WORD PTR [INDOS+2],ES ;Get indos flag location
MOV WORD PTR [INDOS],BX
MOV AL,INTLOC
MOV AH,GET_INTERRUPT_VECTOR
INT 21H
MOV WORD PTR [NEXTINT+2],ES
MOV WORD PTR [NEXTINT],BX
MOV DX,OFFSET DG:HDSPINT
MOV AL,INTLOC
MOV AH,SET_INTERRUPT_VECTOR
INT 21H ;Set hardware interrupt
ENDIF
MOV [MAKERES],1 ;Indicate to do a terminate stay resident
MOV DX,OFFSET DG:GOODMES
MOV AH,STD_CON_STRING_OUTPUT
INT 21H
RET
ASSUME CS:DG,DS:DG,ES:DG,SS:DG
TRANSIENT:
;User interface
CLD
;Code to print header
; MOV DX,OFFSET DG:HEADER
; MOV AH,STD_CON_STRING_OUTPUT
; INT 21H
DOSVER_LOW EQU 0136H ;1.54 in hex
DOSVER_HIGH EQU 0200H ;2.00 in hex
MOV AH,GET_VERSION
INT 21H
XCHG AH,AL ;Turn it around to AH.AL
CMP AX,DOSVER_LOW
JB GOTBADDOS
CMP AX,DOSVER_HIGH
JBE OKDOS
GOTBADDOS:
PUSH CS
POP DS
MOV DX,OFFSET DG:BADVER
MOV AH,STD_CON_STRING_OUTPUT
INT 21H
INT 20H
OKDOS:
MOV AX,CHAR_OPER SHL 8
INT 21H
MOV [SWITCHAR],DL ;Get user switch character
MOV AH,GET_INTERRUPT_VECTOR
MOV AL,COMINT
INT 21H
ASSUME ES:NOTHING
MOV DI,BX
MOV SI,OFFSET DG:SPCOMINT
MOV CX,13
REPE CMPSB
JZ GOTRES ;Signature matched
PUSH CS
POP ES
CALL SETUP
GOTRES:
PUSH CS
POP ES
MOV AH,GET_DEFAULT_DRIVE
INT 21H
MOV [DEFDRV],AL
MOV SI,PARMS
LODSB
OR AL,AL
JNZ GOTPARMS
TRANEXIT:
CALL GETSPLIST
CMP [MAKERES],0
JNZ SETRES
INT 20H
SETRES:
MOV DX,[ENDRES]
INT 27H
ARGSDONE:
CMP [ARGSETUP],0
JZ TRANEXIT
CALL PROCESS
JMP SHORT TRANEXIT
GOTPARMS:
PARSE:
MOV DI,OFFSET DG:PARSEBUF
CALL CPARSE
JC ARGSDONE
CMP AX,4 ;Switch?
JNZ GOTNORMARG
MOV AL,[DI] ;Get the switch character
CMP AL,'C'
JZ SETCAN
CMP AL,'c'
JNZ CHKSPL
SETCAN:
MOV [CANFLG],1
JMP SHORT PARSE
CHKSPL:
CMP AL,'P'
JZ RESETCAN
CMP AL,'p'
JNZ CHKTERM
RESETCAN:
MOV [CANFLG],0
JMP SHORT PARSE
CHKTERM:
CMP AL,'T'
JZ SETTERM
CMP AL,'t'
JZ SETTERM
MOV DX,OFFSET DG:BADSWT
MOV AH,STD_CON_STRING_OUTPUT
INT 21H
JMP SHORT PARSE
SETTERM:
CALL TERMPROCESS
JMP TRANEXIT ; Ignore everything after T switch
GOTNORMARG:
XOR AL,AL
XCHG AL,[ARGSETUP]
OR AL,AL
JZ PARSEARG
CALL NORMPROC ;Don't test ARGSETUP, it just got zeroed
PARSEARG:
PUSH SI
MOV SI,DI
MOV DI,FCB
MOV AX,(PARSE_FILE_DESCRIPTOR SHL 8) OR 1
INT 21H ;Parse the arg
CMP BYTE PTR [DI],0
JNZ DRVOK
MOV DL,[DEFDRV]
INC DL
MOV BYTE PTR [DI],DL ;Set the default drive
DRVOK:
POP SI
INC [ARGSETUP]
JMP SHORT PARSE
TERMPROCESS:
MOV DX,-1
PROCRET:
MOV AH,1
CALL DOSET
PROCRETNFUNC:
MOV [ARGSETUP],0
PUSH CS
POP ES
RET14: RET
PROCESS:
CMP [ARGSETUP],0
JZ RET14 ;Nothing to process
NORMPROC:
MOV AL,BYTE PTR DS:[FCB+1]
CMP AL," "
JZ SRCHBADJ
MOV DX,FCB
MOV AH,[CANFLG]
CMP AH,0
JNZ PROCRET
MOV DX,OFFSET DG:SRCHFCB
MOV AH,SET_DMA
INT 21H
MOV DX,FCB
MOV AH,DIR_SEARCH_FIRST
INT 21H
OR AL,AL
JNZ SRCHBADJ
SRCHLOOP:
MOV DX,OFFSET DG:SRCHFCB
MOV AH,FCB_OPEN
INT 21H
OR AL,AL
JZ OPENOK
CALL OPENERR
JMP SHORT NEXTSEARCH
SRCHBADJ: JMP SRCHBAD
OPENOK:
MOV DX,OFFSET DG:SRCHFCB
MOV AH,0
CALL DOSET
OR AL,AL
JZ NEXTSEARCH
XCHG AL,[FULLFLAG] ;Know AL non-zero
OR AL,AL
JNZ NEXTSEARCH ;Only print message once
MOV DX,OFFSET DG:FULLMES ;Queue full
MOV AH,STD_CON_STRING_OUTPUT
INT 21H
NEXTSEARCH:
MOV DX,OFFSET DG:SRCHFCB
MOV AH,SET_DMA
INT 21H
MOV DX,FCB
MOV AH,DIR_SEARCH_NEXT
INT 21H
OR AL,AL
JNZ PROCRETNFUNC
JMP SRCHLOOP
DOSET:
INT COMINT
MOV [FILCNT],AH ;Suck up return info
MOV WORD PTR [SPLIST+2],ES
MOV WORD PTR [CURFILE+2],ES
MOV WORD PTR [SPLIST],BX
MOV WORD PTR [CURFILE],DX
RET
OPENERR:
PUSH SI
PUSH DI
MOV SI,OFFSET DG:OPFILNAM
PUSH DS
POP ES
MOV DI,OFFSET DG:SRCHFCB
CALL MVFNAM
MOV DX,OFFSET DG:OPMES
MOV AH,STD_CON_STRING_OUTPUT
INT 21H
POP DI
POP SI
RET
SRCHBAD:
PUSH SI
PUSH DI
MOV SI,OFFSET DG:SRCHFNAM
PUSH DS
POP ES
MOV DI,FCB
CALL MVFNAM
MOV DX,OFFSET DG:SRCHMES
MOV AH,STD_CON_STRING_OUTPUT
INT 21H
POP DI
POP SI
JMP PROCRETNFUNC
GETSPLIST:
MOV AH,0FFH
CALL DOSET
PUSH DS
LDS DI,[SPLIST]
MOV DI,[DI-2] ;Get the error count
POP DS
CMP DI,ERRCNT1
JB CNTOK
MOV DX,OFFSET DG:CNTMES
MOV AH,STD_CON_STRING_OUTPUT
INT 21H
CNTOK:
MOV CL,[FILCNT]
OR CL,CL
JZ NOFILES
XOR CH,CH
LES DI,[CURFILE]
PUSH DI
INC DI
INC DI
MOV SI,OFFSET DG:CURFNAM
CALL MVFNAM
POP DI
MOV DX,OFFSET DG:CURMES
MOV AH,STD_CON_STRING_OUTPUT
INT 21H
DEC CX
JCXZ RET12
FILOOP:
MOV DI,ES:[DI]
PUSH DI
INC DI
INC DI
MOV SI,OFFSET DG:FILFNAM
CALL MVFNAM
POP DI
MOV DX,OFFSET DG:FILMES
MOV AH,STD_CON_STRING_OUTPUT
INT 21H
LOOP FILOOP
RET12: RET
NOFILES:
MOV DX,OFFSET DG:NOFILS
MOV AH,STD_CON_STRING_OUTPUT
INT 21H
RET
;Make a message with the file name
MVFNAM:
ASSUME DS:NOTHING,ES:NOTHING
PUSH SI
PUSH DI
PUSH CX
MOV AX,ES
PUSH DS
POP ES
MOV DS,AX
XCHG SI,DI
LODSB
ADD AL,"@"
CMP AL,"@"
JNZ STCHR
MOV AL,[DEFDRV]
ADD AL,"A"
STCHR:
STOSB
INC DI
MOV CX,4
REP MOVSW
INC DI
MOVSW
MOVSB
MOV AX,ES
PUSH DS
POP ES
MOV DS,AX
POP CX
POP DI
POP SI
RET
;-----------------------------------------------------------------------;
; ENTRY: ;
; DS:SI Points input buffer ;
; ES:DI Points to the token buffer ;
; ;
; EXIT: ;
; DS:SI Points to next char in the input buffer ;
; ES:DI Points to the token buffer ;
; CX Character count ;
; AX Condition Code ;
; =1 same as carry set ;
; =2 normal token ;
; =4 switch character, char in token buffer ;
; Carry Flag Set if a CR was found, Reset otherwise ;
; ;
; MODIFIES: ;
; CX, SI, AX and the Carry Flag ;
; ;
;-----------------------------------------------------------------------;
TAB equ 09h
CR equ 0dh
CPARSE:
ASSUME DS:NOTHING,ES:NOTHING,SS:NOTHING
pushf ;save flags
push di ;save the token buffer addrss
xor cx,cx ;no chars in token buffer
call kill_bl
cmp al,CR ;a CR?
jne sj2 ;no, skip
sj1:
mov ax,1 ;condition code
dec si ;adjust the pointer
pop di ;retrive token buffer address
popf ;restore flags
stc ;set the carry bit
ret
sj2:
mov dl,[SWITCHAR]
cmp al,dl ;is the char the switch char?
jne anum_char ;no, process...
call kill_bl
cmp al,CR ;a CR?
je sj1 ;yes, error exit
call move_char ;Put the switch char in the token buffer
mov ax,4 ;Flag switch
jmp short x_done2
anum_char:
call move_char ;just an alphanum string
lodsb
cmp al,' '
je x_done
cmp al,tab
je x_done
cmp al,CR
je x_done
cmp al,','
je x_done
cmp al,'='
je x_done
cmp al,dl ;Switch character
jne anum_char
x_done:
dec si ;adjust for next round
mov ax,2 ;normal token
x_done2:
push ax ;save condition code
mov al,0
stosb ;null at the end
pop ax
pop di ;restore token buffer pointer
popf
clc ;clear carry flag
ret
kill_bl proc near
lodsb
cmp al,' '
je kill_bl
cmp al,tab
je kill_bl
cmp al,',' ;a comma?
je kill_bl
cmp al,'='
je kill_bl
ret
kill_bl endp
move_char proc near
stosb ;store char in token buffer
inc cx ;increment char count
ret
move_char endp
CODE ENDS
END START