MS-DOS/v2.0/source/TCODE4.ASM
2018-09-21 17:53:34 -07:00

1002 lines
27 KiB
NASM
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

TITLE PART4 - COMMAND Transient routines.
INCLUDE COMSW.ASM
.xlist
.xcref
INCLUDE DOSSYM.ASM
INCLUDE DEVSYM.ASM
INCLUDE COMSEG.ASM
.list
.cref
INCLUDE COMEQU.ASM
DATARES SEGMENT PUBLIC
EXTRN RESTDIR:BYTE
DATARES ENDS
TRANDATA SEGMENT PUBLIC
EXTRN BADDRV:BYTE,BADSWT:BYTE
EXTRN BADDAT:BYTE,NEWDAT:BYTE,BADTIM:BYTE
EXTRN DMES:BYTE,CURDAT_PRE:BYTE,CURDAT_MID:BYTE,CURDAT_POST:BYTE
EXTRN RENERR:BYTE,VERMES_PRE:BYTE,VERMES_POST:BYTE
EXTRN DIRHEAD_PRE:BYTE,DIRHEAD_POST:BYTE
EXTRN ACRLF:BYTE,BADARGS:BYTE,NOTFND:BYTE
EXTRN NEWTIM:BYTE,BADCD:BYTE,BADMKD:BYTE,CLSSTRING:BYTE
EXTRN CURTIM_PRE:BYTE,CURTIM_POST:BYTE,PauseMes:BYTE
EXTRN BADRMD:BYTE
TRANDATA ENDS
TRANSPACE SEGMENT PUBLIC
EXTRN COMBUF:BYTE,DIRCHAR:BYTE,USERDIR1:BYTE
EXTRN BYTCNT:WORD,CURDRV:BYTE,COMSW:WORD,ARGTS:WORD
EXTRN LINCNT:BYTE,LINLEN:BYTE,FILECNT:WORD,CHARBUF:BYTE
EXTRN DIRBUF:BYTE,BITS:WORD,PATHPOS:WORD
EXTRN DESTISDIR:BYTE,DESTTAIL:WORD,DESTINFO:BYTE,FULLSCR:WORD
EXTRN INTERNATVARS:BYTE,RESSEG:WORD,TPA:WORD
TRANSPACE ENDS
TRANCODE SEGMENT PUBLIC BYTE
ASSUME CS:TRANGROUP,DS:NOTHING,ES:NOTHING,SS:NOTHING
EXTRN NOTEST2:NEAR,PRINTVOL:NEAR,Print_Date:NEAR
EXTRN CERROR:NEAR,SWITCH:NEAR,PWD:NEAR,SETREST:NEAR,MESTRAN:NEAR
EXTRN NOTFNDERR:NEAR,CHKCNT:NEAR,GETKEYSTROKE:NEAR
EXTRN SETPATH:NEAR,PATHCRUNCH:NEAR,PRINT:NEAR,ZPRINT:NEAR
EXTRN DISPSIZE:NEAR,OUT:NEAR,OUT2:NEAR,ERROR_PRINT:NEAR
EXTRN SCANOFF:NEAR,OUTBYTE:NEAR,GETNUM:NEAR,ERROR_OUTPUT:NEAR
PUBLIC PRINT_TIME,CATALOG
PUBLIC BADCDERR,PRINT_VERSION,CLS,SAVUDIR,SAVUDIR1
PUBLIC TYPEFIL,CRENAME,$RMDIR
PUBLIC CTIME,$CHDIR,ONESPC,DATINIT
PUBLIC $MKDIR,VERSION,RESTUDIR1
PUBLIC RESTUDIR,CRLF2,ERASE
PUBLIC volume,date,P_date,PAUSE
CATALOG:
CALL OKVOLARG
MOV AL,"?" ; *.* is default file spec.
MOV DI,5DH
MOV CX,11
REP STOSB
MOV SI,81H
CALL SWITCH
MOV DI,FCB
MOV AX,(PARSE_FILE_DESCRIPTOR SHL 8) OR 0DH ; Parse with default name and extension
INT int_command
; Begin by processing any switches that may have been specified.
; BITS will contain any information about switches that was
; found when the command line was parsed.
SETSWT:
MOV AX,[COMSW] ; Get switches from command
OR AX,[ARGTS] ; OR in switches from all of tail
MOV [BITS],AX
MOV BYTE PTR[FULLSCR],LINPERPAG
TEST AL,1 ; Look for W switch
MOV AL,NORMPERLIN
JZ DIR
MOV AL,WIDEPERLIN
DIR:
MOV [LINLEN],AL ; Set number of entries per line
MOV [LINCNT],AL
MOV [FILECNT],0 ; Keep track of how many files found
MOV DX,OFFSET TRANGROUP:DIRBUF ; Set Disk transfer address
MOV AH,SET_DMA
INT int_command
CALL PATHCRUNCH ; Get where we're going
PUSHF
JNC NOTEST
CMP [DESTISDIR],0 ; No CHDIRs worked
JZ NOTEST ; see if they should have
JMP BADCDERR
NOTEST:
MOV SI,FCB
MOV DI,OFFSET TRANGROUP:DIRBUF
MOV DX,DI
MOV CX,12
REP MOVSB
MOV AH,FCB_OPEN
INT int_command
MOV DX,OFFSET TRANGROUP:DIRHEAD_PRE ; Print "Directory of"
PUSH AX ; save return code
CALL PRINT
CALL PWD ; print the path
MOV DX,OFFSET TRANGROUP:DIRHEAD_POST
CALL PRINT
POP AX
OR AL,AL
JNZ OKDODIR ; Go ahead and dir if open fail
TEST [DIRBUF+fcb_DEVID],devid_device
JZ OKDODIR
JMP NOTFNDERR ; Can't DIR a device
OKDODIR:
MOV AH,DIR_SEARCH_FIRST
MOV BYTE PTR DS:[FCB-7],0FFH
MOV BYTE PTR DS:[FCB-1],010H
POPF
JC SHOWDIR ; Current dir
JZ DOFIRST ; FCB is *.*
MOV AL,"?"
MOV DI,5DH
MOV CX,11
REP STOSB ; Remake default FCB
MOV SI,[DESTTAIL]
MOV DI,FCB
MOV AX,(PARSE_FILE_DESCRIPTOR SHL 8) OR 0EH ; Parse with default drive, name and extension
INT int_command
MOV AH,DIR_SEARCH_FIRST
DOFIRST:
MOV DX,FCB-7
INT int_command
PUSH AX
CALL RESTUDIR
POP AX
JMP SHORT DIRSTART
SHOWDIR:
MOV DX,FCB-7 ; DX -> Unopened FCB
INT int_command ; Search for a file to match FCB
DIRSTART:
INC AL ; FF = file not found
JNZ AGAIN ; Either an error or we are finished
JMP CHKCNT
NEXENTJ:
JMP NEXENT
AGAIN:
INC [FILECNT] ; Keep track of how many we find
MOV SI,OFFSET TRANGROUP:DIRBUF+8 ; SI -> information returned by sys call
CALL SHONAME
TEST BYTE PTR[BITS],WSWITCH ; W switch set?
JNZ NEXENTJ ; If so, no size, date, or time
MOV SI,OFFSET TRANGROUP:DIRBUF+8+dir_attr
TEST BYTE PTR [SI],attr_directory
JZ FILEENT
MOV DX,OFFSET TRANGROUP:DMES
CALL PRINT
JMP SHORT NOFSIZ
FILEENT:
CALL DISPSIZE ; Print size of file
NOFSIZ:
MOV AX,WORD PTR [DIRBUF+8+dir_date] ; Get date
OR AX,AX
JZ NEXENT ; Skip if no date
MOV DI,OFFSET TRANGROUP:CHARBUF
PUSH AX
MOV AX," "
STOSW
POP AX
MOV BX,AX
AND AX,1FH ; get day
MOV DL,AL
MOV AX,BX
MOV CL,5
SHR AX,CL ; Align month
AND AL,0FH ; Get month
MOV DH,AL
MOV CL,BH
SHR CL,1 ; Align year
XOR CH,CH
ADD CX,80 ; Relative 1980
CMP CL,100
JB MILLENIUM
SUB CL,100
MILLENIUM:
CALL DATE_CXDX
MOV CX,WORD PTR[DIRBUF+8+dir_time] ; Get time
JCXZ PRBUF ; Time field present?
MOV AX," "
STOSW
SHR CX,1
SHR CX,1
SHR CX,1
SHR CL,1
SHR CL,1 ; Hours in CH, minutes in CL
MOV BL,[INTERNATVARS.Time_24]
OR BL,80H ; Tell P_TIME called from DIR
CALL P_TIME ; Don't care about DX, never used with DIR
PRBUF:
XOR AX,AX
STOSB
MOV DX,OFFSET TRANGROUP:CHARBUF
CALL ZPRINT
NEXENT:
DEC [LINCNT]
JNZ SAMLIN
NEXLIN:
MOV AL,[LINLEN]
MOV [LINCNT],AL
CALL CRLF2
TEST BYTE PTR[BITS],PSWITCH ; P switch present?
JZ SCROLL ; If not, just continue
DEC BYTE PTR[FULLSCR]
JNZ SCROLL
MOV BYTE PTR[FULLSCR],LINPERPAG
MOV DX,OFFSET TRANGROUP:PAUSEMES
CALL PRINT
CALL GetKeystroke
CALL CRLF2
SCROLL:
MOV AH,DIR_SEARCH_NEXT
JMP SHOWDIR
SAMLIN:
MOV AL,9 ; Output a tab
CALL OUT
JMP SHORT SCROLL
SHONAME:
MOV DI,OFFSET TRANGROUP:CHARBUF
MOV CX,8
REP MOVSB
MOV AL," "
STOSB
MOV CX,3
REP MOVSB
XOR AX,AX
STOSB
PUSH DX
MOV DX,OFFSET TRANGROUP:CHARBUF
CALL ZPRINT
POP DX
return
ONESPC:
MOV AL," "
JMP OUT
CRLF2:
PUSH DX
MOV DX,OFFSET TRANGROUP:ACRLF
PR:
PUSH DS
PUSH CS
POP DS
CALL PRINT
POP DS
POP DX
return
PAUSE:
MOV DX,OFFSET TRANGROUP:PAUSEMES
CALL ERROR_PRINT
CALL GetKeystroke
CALL CRLF2
return
ERASE:
MOV DX,OFFSET TRANGROUP:BADARGS
MOV SI,80H
LODSB
OR AL,AL
JZ ERRJ2
CALL SCANOFF
CMP AL,13 ; RETURN KEY?
JZ ERRJ2 ; IF SO NO PARAMETERS SPECIFIED
ERA1:
CALL PATHCRUNCH
JNC NOTEST2J
CMP [DESTISDIR],0 ; No CHDIRs worked
JZ NOTEST2J ; see if they should have
BADCDERR:
MOV DX,OFFSET TRANGROUP:BADCD
ERRJ2:
JMP CERROR
NOTEST2J:
JMP NOTEST2
CRENAME:
CALL PATHCRUNCH
JNC NOTEST3
CMP [DESTISDIR],0 ; No CHDIRs worked
JZ NOTEST3 ; see if they should have
JMP BADCDERR
NOTEST3:
MOV SI,[PATHPOS]
MOV DI,FCB+10H
CALL SCANOFF
MOV AX,(PARSE_FILE_DESCRIPTOR SHL 8) OR 01H
INT int_command
CMP BYTE PTR DS:[FCB+10H+1]," " ; Check if parameter exists
MOV DX,OFFSET TRANGROUP:BADARGS
JZ ERRJ ; Error if missing parameter
MOV AH,FCB_RENAME
MOV DX,FCB
INT int_command
PUSH AX
CALL RESTUDIR
POP AX
MOV DX,OFFSET TRANGROUP:RENERR
INC AL
retnz
ERRJ:
JMP CERROR
ASSUME DS:TRANGROUP,ES:TRANGROUP
TYPEFIL:
mov si,81H
call SCANOFF ; Skip to first non-delim
cmp al,0DH
jnz GOTTARG
jmp NOARGERR ; No args
GOTTARG:
CALL SETPATH
MOV AX,OPEN SHL 8
INT int_command
MOV DX,OFFSET TRANGROUP:NOTFND
JC ERRJ
MOV BX,AX ; Handle
MOV DS,[TPA]
XOR DX,DX
ASSUME DS:NOTHING
TYPELP:
MOV CX,[BYTCNT]
MOV AH,READ
INT int_command
MOV CX,AX
JCXZ RET56
PUSH BX
MOV BX,1
MOV AH,WRITE
INT int_command
POP BX
JC ERROR_OUTPUTJ
CMP AX,CX
JZ TYPELP
DEC CX
CMP AX,CX
retz ; One less byte OK (^Z)
ERROR_OUTPUTJ:
MOV BX,1
MOV AX,IOCTL SHL 8
INT int_command
TEST DL,devid_ISDEV
retnz ; If device, no error message
JMP ERROR_OUTPUT
RESTUDIR1:
PUSH DS
MOV DS,[RESSEG]
ASSUME DS:RESGROUP
CMP [RESTDIR],0
POP DS
ASSUME DS:TRANGROUP
retz
RESTUDIR:
MOV DX,OFFSET TRANGROUP:USERDIR1
MOV AH,CHDIR
INT int_command ; Restore users DIR
XOR AL,AL
CALL SETREST
RET56:
return
VOLUME:
mov si,81H
call SCANOFF ; Skip to first non-delim
CMP BYTE PTR DS:[FCB],0 ;Default drive?
JZ CHECKNOARG ;Yes
INC SI
INC SI ;Skip over d:
MOV BX,SI
CALL SCANOFF
CMP BX,SI
JNZ OKVOLARG ; If we skipped some delims at this point, OK
CHECKNOARG:
cmp al,0DH
JZ OKVOLARG
BADVOLARG:
MOV DX,OFFSET TRANGROUP:BADDRV
JMP CERROR
OKVOLARG:
CALL CRLF2
PUSH DS
POP ES
MOV DI,FCB-7 ; Set up extended FCB
MOV AX,-1
STOSB
XOR AX,AX
STOSW
STOSW
STOSB
MOV AL,8 ; Look for volume label
STOSB
INC DI ; Skip drive byte
MOV CX,11
MOV AL,'?'
REP STOSB
MOV DX,OFFSET TRANGROUP:DIRBUF
MOV AH,SET_DMA
INT int_command
MOV DX,FCB-7
MOV AH,DIR_SEARCH_FIRST
INT int_command
JMP PRINTVOL
VERSION:
CALL CRLF2
CALL PRINT_VERSION
JMP CRLF2
PRINT_VERSION:
MOV DI,OFFSET TRANGROUP:CHARBUF
MOV SI,OFFSET TRANGROUP:VERMES_PRE
CALL MESTRAN
MOV AH,GET_VERSION
INT int_command
PUSH AX
XOR AH,AH
MOV CL,10
DIV CL
MOV CL,4
SHL AL,CL
OR AL,AH
MOV CX,1110H
MOV DL,AL
CALL OUTBYTE
MOV AL,'.'
STOSB
POP AX
MOV AL,AH
XOR AH,AH
MOV CL,10
DIV CL
MOV CL,4
SHL AL,CL
OR AL,AH
MOV CX,1010H
MOV DL,AL
CALL OUTBYTE
MOV SI,OFFSET TRANGROUP:VERMES_POST
CALL MESTRAN
XOR AX,AX
STOSB
MOV DX,OFFSET TRANGROUP:CHARBUF
JMP ZPRINT
ASSUME DS:TRANGROUP
CLS:
IF IBMVER
MOV BX,1
MOV AX,IOCTL SHL 8
INT int_command
TEST DL,devid_ISDEV
JZ ANSICLS ; If a file put out ANSI
TEST DL,devid_SPECIAL
JZ ANSICLS ; If not special CON, do ANSI
MOV AX,(GET_INTERRUPT_VECTOR SHL 8) OR 29H
INT int_command
MOV DX,ES
MOV AX,(GET_INTERRUPT_VECTOR SHL 8) OR 20H
INT int_command
MOV AX,ES
CMP DX,AX
JA ANSICLS ; If not default driver, do ANSI
MOV AH,11 ; Set overscan to black
XOR BX,BX
INT 16
MOV AH,15
INT 16
MOV DL,AH
DEC DL
IF KANJI
MOV DH,23
ELSE
MOV DH,25
ENDIF
XOR AX,AX
MOV CX,AX
IF KANJI
MOV BH,0
ELSE
MOV BH,7
ENDIF
MOV AH,6
INT 16
XOR DX,DX
MOV BH,0
MOV AH,2
INT 16
return
ANSICLS:
ENDIF
MOV SI,OFFSET TRANGROUP:CLSSTRING
LODSB
MOV CL,AL
XOR CH,CH
MOV AH,RAW_CON_IO
CLRLOOP:
LODSB
MOV DL,AL
INT int_command
LOOP CLRLOOP
return
$CHDIR:
MOV AX,[COMSW]
OR AX,[ARGTS]
MOV DX,OFFSET TRANGROUP:BADSWT
JNZ CERRORJ3
mov si,81H
call SCANOFF ; Skip to first non-delim
cmp al,0DH
jz PWDJ ; No args
inc si ; Skip first char
lodsw
cmp ax,(0DH SHL 8) OR ':' ; d:<CR> ?
jnz REALCD ; no
PWDJ:
jmp PWD ; Drive only specified
REALCD:
CALL SETPATH
TEST [DESTINFO],2
JNZ BADCDERRJ
MOV AH,CHDIR
INT int_command
retnc
BADCDERRJ:
JMP BADCDERR
$MKDIR:
CALL SETRMMK
JNZ BADMDERR
MOV AH,MKDIR
INT int_command
retnc
BADMDERR:
MOV DX,OFFSET TRANGROUP:BADMKD
CERRORJ3:
JMP CERROR
NOARGERR:
MOV DX,OFFSET TRANGROUP:BADARGS
JMP SHORT CERRORJ3
SETRMMK:
mov si,81H
call SCANOFF ; Skip to first non-delim
cmp al,0DH
jz NOARGERR ; No args
MOV AX,[COMSW]
OR AX,[ARGTS]
MOV DX,OFFSET TRANGROUP:BADSWT
JNZ CERRORJ3
CALL SETPATH
TEST [DESTINFO],2
return
$RMDIR:
CALL SETRMMK
JNZ BADRDERR
MOV AH,RMDIR
INT int_command
retnc
BADRDERR:
MOV DX,OFFSET TRANGROUP:BADRMD
JMP CERROR
SAVUDIR:
; DL is drive number A=1
MOV DI,OFFSET TRANGROUP:USERDIR1
SAVUDIR1:
MOV AL,DL
ADD AL,'@'
CMP AL,'@'
JNZ GOTUDRV
ADD AL,[CURDRV]
INC AL ; A = 1
GOTUDRV:
STOSB
MOV AH,[DIRCHAR]
MOV AL,DRVCHAR
STOSW
PUSH ES
POP DS
ASSUME DS:NOTHING
MOV SI,DI
MOV AH,CURRENT_DIR ; Get the Directory Text
INT int_command
retc
PUSH CS
POP DS
ASSUME DS:TRANGROUP
return
ASSUME DS:TRANGROUP,ES:TRANGROUP
; Date and time are set during initialization and use
; this routines since they need to do a long return
DATINIT PROC FAR
PUSH ES
PUSH DS ; Going to use the previous stack
MOV AX,CS ; Set up the appropriate segment registers
MOV ES,AX
MOV DS,AX
MOV DX,OFFSET TRANGROUP:INTERNATVARS ;Set up internat vars
MOV AX,INTERNATIONAL SHL 8
INT 21H
MOV WORD PTR DS:[81H],13 ; Want to prompt for date during initialization
MOV [COMBUF],COMBUFLEN ; Init COMBUF
MOV WORD PTR [COMBUF+1],0D01H
CALL DATE
CALL CTIME
POP DS
POP ES
RET
DATINIT ENDP
; DATE - Gets and sets the time
DATE_CXDX:
MOV BX,CX
P_DATE:
MOV AX,BX
MOV CX,DX
MOV DL,100
DIV DL
XCHG AL,AH
XCHG AX,DX
MOV BH,"0"-" " ; Enable leading zero suppression
MOV AX,WORD PTR [INTERNATVARS.Date_tim_format]
OR AX,AX
JZ USPDAT
DEC AX
JZ EUPDAT
MOV BH,0 ; Disable leading zero suppression
CALL P_YR
CALL P_DSEP
CALL P_MON
CALL P_DSEP
CALL P_DAY
return
USPDAT:
CALL P_MON
CALL P_DSEP
CALL P_DAY
PLST:
CALL P_DSEP
CALL P_YR
return
EUPDAT:
CALL P_DAY
CALL P_DSEP
CALL P_MON
JMP PLST
P_MON:
MOV AL,CH
CALL OUT2
return
P_DSEP:
MOV AL,BYTE PTR [INTERNATVARS.Date_sep]
STOSB
return
P_DAY:
MOV AL,CL
CALL OUT2
return
P_YR:
MOV AL,DH
OR AL,AL
JZ TWODIGYR ; Two instead of 4 digit year
CALL OUT2
TWODIGYR:
MOV AL,DL
CALL OUT2
return
DATE:
MOV SI,81H ; Accepting argument for date inline
CALL SCANOFF
CMP AL,13
JZ PRMTDAT
JMP COMDAT
PRMTDAT:
MOV DX,OFFSET TRANGROUP:CURDAT_PRE
CALL PRINT ; Print "Current date is "
CALL PRINT_DATE
MOV DX,OFFSET TRANGROUP:CURDAT_POST
CALL PRINT
GETDAT:
MOV DX,OFFSET TRANGROUP:NEWDAT
CALL ERROR_PRINT ; Print "Enter new date: "
MOV AH,STD_CON_STRING_INPUT
MOV DX,OFFSET TRANGROUP:COMBUF
INT int_command ; Get input line
CALL CRLF2
MOV SI,OFFSET TRANGROUP:COMBUF+2
CMP BYTE PTR[SI],13 ; Check if new date entered
retz
COMDAT:
MOV AX,WORD PTR [INTERNATVARS.Date_tim_format]
OR AX,AX
JZ USSDAT
DEC AX
JZ EUSDAT
CALL GET_YR
JC DATERRJ
CALL GET_DSEP
JC DATERRJ
CALL GET_MON
JC DATERRJ
CALL GET_DSEP
JC DATERRJ
CALL GET_DAY
DAT_SET:
JC DATERR
LODSB
CMP AL,13
JNZ DATERR
MOV AH,SET_DATE
INT int_command
OR AL,AL
JNZ DATERR
return
USSDAT:
CALL GET_MON
JC DATERR
CALL GET_DSEP
DATERRJ:
JC DATERR
CALL GET_DAY
TGET:
JC DATERR
CALL GET_DSEP
JC DATERR
CALL GET_YR
JMP DAT_SET
EUSDAT:
CALL GET_DAY
JC DATERR
CALL GET_DSEP
JC DATERR
CALL GET_MON
JMP TGET
GET_MON:
CALL GETNUM ; Get one or two digit number
retc
MOV DH,AH ; Put in position
return
GET_DAY:
CALL GETNUM
MOV DL,AH ; Put in position
return
GET_YR:
CALL GETNUM
retc
MOV CX,1900
CALL GET_DSEP
PUSHF
DEC SI
POPF
JZ BIAS
CMP BYTE PTR[SI],13
JZ BIAS
MOV AL,100
MUL AH
MOV CX,AX
CALL GETNUM
retc
BIAS:
MOV AL,AH
MOV AH,0
ADD CX,AX
IF IBM AND KANJI
;
; Gross hack for PC-J machine: CMOS clock cannot handle years after 2079
;
CMP CX,2080
JB YearOk
STC
return
YearOk: CLC
ENDIF
return
DATERR:
MOV DX,OFFSET TRANGROUP:BADDAT
CALL PRINT
JMP GETDAT
GET_DSEP:
LODSB
CMP AL,'/'
retz
CMP AL,'.'
retz
CMP AL,'-'
retz
STC
return
; TIME gets and sets the time
CTIME:
MOV SI,81H ; Accepting argument for time inline
CALL SCANOFF
CMP AL,13
JZ PRMTTIM
MOV BX,".:"
CALL INLINE
JMP COMTIM
PRINT_TIME:
MOV AH,GET_TIME
INT int_command ; Get time in CX:DX
PUSH DI
PUSH ES
PUSH CS
POP ES
MOV DI,OFFSET TRANGROUP:CHARBUF
MOV BL,1 ; Always 24 hour time
CALL P_TIME
XOR AX,AX
STOSB
MOV DX,OFFSET TRANGROUP:CHARBUF
CALL ZPRINT
POP ES
POP DI
return
P_TIME:
MOV AL,CH
TEST BL,07FH ; Ignore high bit
JNZ T24 ; 24 hr time?
MOV BH,"a" ; Assume A.M.
CMP AL,12 ; In the afternoon?
JB MORN
MOV BH,"p"
JE MORN
SUB AL,12 ; Keep it to 12 hours or less
MORN:
OR AL,AL ; Before 1 am?
JNZ T24
MOV AL,12
T24:
PUSH BX
MOV BH,"0"-" " ; Enable leading zero suppression
CALL OUT2
CALL P_TSEP
MOV AL,CL
CALL OUT2
POP BX
PUSH BX
TEST BL,80H
JNZ PAP ; If from DIR, go directly to am pm
MOV BH,0 ; Disable leading zero suppression
CALL P_TSEP
MOV AL,DH
CALL OUT2
IF NOT IBMJAPAN
MOV AL,"."
STOSB
MOV AL,DL
CALL OUT2
ENDIF
PAP:
POP BX
TEST BL,07FH ; Ignore high bit
retnz ; 24 hour time, no am pm
MOV AL,BH
STOSB ; Store 'a' or 'p'
return
P_TSEP:
MOV AL,[INTERNATVARS.Time_sep]
STOSB
return
PRMTTIM:
MOV DX,OFFSET TRANGROUP:CURTIM_PRE
CALL PRINT ; Print "Current time is "
CALL PRINT_TIME
MOV DX,OFFSET TRANGROUP:CURTIM_POST
CALL PRINT
GETTIM:
XOR CX,CX ; Initialize hours and minutes to zero
MOV DX,OFFSET TRANGROUP:NEWTIM
MOV BX,".:"
CALL GETBUF
COMTIM:
retz ; If no time present, don't change it
JC TIMERR
MOV CX,DX
XOR DX,DX
LODSB
CMP AL,13
JZ SAVTIM
CMP AL,BL
JZ GOTSEC
CMP AL,BH
JNZ TIMERR
GOTSEC:
CALL GETNUM
JC TIMERR
MOV DH,AH ; Position seconds
LODSB
CMP AL,13
JZ SAVTIM
CMP AL,"."
JNZ TIMERR
CALL GETNUM
JC TIMERR
MOV DL,AH
LODSB
CMP AL,13
JNZ TIMERR
SAVTIM:
MOV AH,SET_TIME
INT int_command
OR AL,AL
retz ; Error in time?
TIMERR:
MOV DX,OFFSET TRANGROUP:BADTIM
CALL PRINT ; Print error message
JMP GETTIM ; Try again
GETBUF:
CALL ERROR_PRINT ; Print "Enter new time: "
MOV AH,STD_CON_STRING_INPUT
MOV DX,OFFSET TRANGROUP:COMBUF
INT int_command ; Get input line
CALL CRLF2
MOV SI,OFFSET TRANGROUP:COMBUF+2
CMP BYTE PTR[SI],13 ; Check if new time entered
retz
INLINE:
CALL GETNUM ; Get one or two digit number
retc
MOV DH,AH ; Put in position
LODSB
CMP AL,BL
JZ NEXT
CMP AL,BH
JZ NEXT
DEC SI ; Clears zero flag
CLC
MOV DL,0
return ; Time may have only an hour specified
NEXT:
CALL GETNUM
MOV DL,AH ; Put in position
return
TRANCODE ENDS
END