diff --git a/README.md b/README.md
index e714016..15a99bf 100644
--- a/README.md
+++ b/README.md
@@ -71,7 +71,7 @@ The onboard (blue) status LED can be controlled via the sys tree:
 
 `sudo sh -c "echo 0 > /sys/devices/platform/leds/leds/blue\:status/brightness"` to turn off
 
-You can make it flash as wifi traffic is seen with:
+You can make it flash as network traffic is seen with:
 
 `sudo sh -c "echo phy0rx > /sys/devices/platform/leds/leds/blue\:status/trigger"`
 
diff --git a/alt-trees/general/general.dts b/alt-trees/general/mq-pro-general.dts
similarity index 86%
rename from alt-trees/general/general.dts
rename to alt-trees/general/mq-pro-general.dts
index c62d121..48bbe8a 100644
--- a/alt-trees/general/general.dts
+++ b/alt-trees/general/mq-pro-general.dts
@@ -1,14 +1,13 @@
-// SPDX-License-Identifier: (GPL-2.0+ or MIT)
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 // Copyright (C) 2022 Samuel Holland <samuel@sholland.org>
 
-/dts-v1/;
-
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
-#include <dt-bindings/pwm/pwm.h>
+
+/dts-v1/;
 
 #include "sun20i-d1.dtsi"
-#include "sun20i-d1-common-regulators.dtsi"
+#include "sun20i-common-regulators.dtsi"
 
 / {
 	model = "MangoPi MQ Pro";
@@ -16,25 +15,13 @@
 
 	aliases {
 		ethernet0 = &rtl8723ds;
-		mmc0 = &mmc0;
+		serial0 = &uart0;
 	};
 
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
 
-	hdmi_connector: connector {
-		compatible = "hdmi-connector";
-		type = "c";
-
-		port {
-			hdmi_connector_in: endpoint {
-				remote-endpoint = <&hdmi_out_connector>;
-			};
-		};
-	};
-
-
 	leds {
 		compatible = "gpio-leds";
 
@@ -79,28 +66,14 @@
 	cpu-supply = <&reg_vdd_cpu>;
 };
 
-&de {
-	status = "okay";
+&dcxo {
+	clock-frequency = <24000000>;
 };
 
 &ehci1 {
 	status = "okay";
 };
 
-&hdmi {
-	status = "okay";
-};
-
-&hdmi_out {
-	hdmi_out_connector: endpoint {
-		remote-endpoint = <&hdmi_connector_in>;
-	};
-};
-
-&hdmi_phy {
-	status = "okay";
-};
-
 &mmc0 {
 	bus-width = <4>;
 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
@@ -226,6 +199,6 @@
 };
 
 &usbphy {
-	usb0_vbus-supply = <&reg_vcc>;
+	usb1_vbus-supply = <&reg_vcc>;
 	status = "okay";
 };
diff --git a/alt-trees/serial/serial.dts b/alt-trees/serial/mq-pro-serial.dts
similarity index 100%
rename from alt-trees/serial/serial.dts
rename to alt-trees/serial/mq-pro-serial.dts
diff --git a/alt-trees/spi/spi.dts b/alt-trees/spi/mq-pro-spi.dts
similarity index 100%
rename from alt-trees/spi/spi.dts
rename to alt-trees/spi/mq-pro-spi.dts
diff --git a/source/README.md b/source/README.md
index 7cfa200..d62127c 100644
--- a/source/README.md
+++ b/source/README.md
@@ -1 +1,2 @@
-## Download the sources here, see [build-tree README](../build-tree/README.md).
+## Download the Ubuntu sources here if you are building custom DTB's
+See [build-tree README](../build-tree/README.md).