mirror of
https://github.com/easytarget/MQ-Pro-IO.git
synced 2026-01-23 11:23:10 +00:00
refactor, extensive, still a work in progress
This commit is contained in:
Owen
Binary file not shown.
File diff suppressed because it is too large
Load Diff
@@ -1 +0,0 @@
|
||||
6.8.0-31-allwinner-nezha.gpio
|
||||
Binary file not shown.
@@ -1 +0,0 @@
|
||||
6.8.0-31-common.gpio
|
||||
Binary file not shown.
@@ -1,33 +0,0 @@
|
||||
```
|
||||
MangoPI MQ Pro GPIO header (dtb name: MangoPi MQ Pro)
|
||||
|
||||
Gpio Header:
|
||||
func des pin pin des func
|
||||
3v3 1 --o o-- 2 5v
|
||||
i2c0.sda (2502000.i2c:205) PG13 3 --o o-- 4 5v
|
||||
i2c0.sck (2502000.i2c:204) PG12 5 --o o-- 6 gnd
|
||||
free (39) PB7 7 --o o-- 8 PB8 uart0.tx (2500000.serial:40)
|
||||
gnd 9 --o o-- 10 PB9 uart0.rx (2500000.serial:41)
|
||||
free (117) PD21 11 --o o-- 12 PB5 i2c1.sda (2502400.i2c:37)
|
||||
free (118) PD22 13 --o o-- 14 gnd
|
||||
uart2.tx (2500800.serial:32) PB0 15 --o o-- 16 PB1 uart2.rx (2500800.serial:33)
|
||||
3v3 17 --o o-- 18 PD14 uart3.cts (2500c00.serial:110)
|
||||
free (108) PD12 19 --o o-- 20 gnd
|
||||
uart3.rts (2500c00.serial:109) PD13 21 --o o-- 22 PC1 i2c2.sda (2502800.i2c:65)
|
||||
uart3.rx (2500c00.serial:107) PD11 23 --o o-- 24 PD10 uart3.tx (2500c00.serial:106)
|
||||
gnd 25 --o o-- 26 PD15 free (111)
|
||||
i2c3.sda (2502c00.i2c:145) PE17 27 --o o-- 28 PE16 i2c3.sck (2502c00.i2c:144)
|
||||
free (42) PB10 29 --o o-- 30 gnd
|
||||
free (43) PB11 31 --o o-- 32 PC0 i2c2.sck (2502800.i2c:64)
|
||||
free (44) PB12 33 --o o-- 34 gnd
|
||||
free (38) PB6 35 --o o-- 36 PB2 uart4.tx (2501000.serial:34)
|
||||
free (113) PD17 37 --o o-- 38 PB3 uart4.rx (2501000.serial:35)
|
||||
gnd 39 --o o-- 40 PB4 i2c1.sck (2502400.i2c:36)
|
||||
|
||||
Other gpio outputs of interest:
|
||||
-- PD18: Blue Status Led - gpio (2000000.pinctrl:114)
|
||||
|
||||
Notes:
|
||||
- I2C pins 3,5,27 and 28 (PG13, PG12, PE17 and PE16) have 10K pullup resistors to 3v3
|
||||
- The Status LED (PD18) is common with the LED_PWM pin on the DSI/LVDS output
|
||||
```
|
||||
@@ -1 +0,0 @@
|
||||
6.8.0-31-mqpro-serial.gpio
|
||||
33
precompiled-trees/serial/README.md
Normal file
33
precompiled-trees/serial/README.md
Normal file
@@ -0,0 +1,33 @@
|
||||
```
|
||||
MangoPI MQ Pro GPIO header (dtb name: MangoPi MQ Pro)
|
||||
|
||||
Gpio Header:
|
||||
func des pin pin des func
|
||||
3v3 1 --o o-- 2 5v
|
||||
i2c0.sda (2502000.i2c:205) PG13 3 --o o-- 4 5v
|
||||
i2c0.sck (2502000.i2c:204) PG12 5 --o o-- 6 gnd
|
||||
free (39) PB7 7 --o o-- 8 PB8 uart0.tx (2500000.serial:40)
|
||||
gnd 9 --o o-- 10 PB9 uart0.rx (2500000.serial:41)
|
||||
free (117) PD21 11 --o o-- 12 PB5 i2c1.sda (2502400.i2c:37)
|
||||
free (118) PD22 13 --o o-- 14 gnd
|
||||
uart2.tx (2500800.serial:32) PB0 15 --o o-- 16 PB1 uart2.rx (2500800.serial:33)
|
||||
3v3 17 --o o-- 18 PD14 uart3.cts (2500c00.serial:110)
|
||||
free (108) PD12 19 --o o-- 20 gnd
|
||||
uart3.rts (2500c00.serial:109) PD13 21 --o o-- 22 PC1 i2c2.sda (2502800.i2c:65)
|
||||
uart3.rx (2500c00.serial:107) PD11 23 --o o-- 24 PD10 uart3.tx (2500c00.serial:106)
|
||||
gnd 25 --o o-- 26 PD15 free (111)
|
||||
i2c3.sda (2502c00.i2c:145) PE17 27 --o o-- 28 PE16 i2c3.sck (2502c00.i2c:144)
|
||||
free (42) PB10 29 --o o-- 30 gnd
|
||||
free (43) PB11 31 --o o-- 32 PC0 i2c2.sck (2502800.i2c:64)
|
||||
free (44) PB12 33 --o o-- 34 gnd
|
||||
free (38) PB6 35 --o o-- 36 PB2 uart4.tx (2501000.serial:34)
|
||||
free (113) PD17 37 --o o-- 38 PB3 uart4.rx (2501000.serial:35)
|
||||
gnd 39 --o o-- 40 PB4 i2c1.sck (2502400.i2c:36)
|
||||
|
||||
Other gpio outputs of interest:
|
||||
-- PD18: Blue Status Led - gpio (2000000.pinctrl:114)
|
||||
|
||||
Notes:
|
||||
- I2C pins 3,5,27 and 28 (PG13, PG12, PE17 and PE16) have 10K pullup resistors to 3v3
|
||||
- The Status LED (PD18) is common with the LED_PWM pin on the DSI/LVDS output
|
||||
```
|
||||
Binary file not shown.
@@ -1,33 +0,0 @@
|
||||
```
|
||||
MangoPI MQ Pro GPIO header (dtb name: MangoPi MQ Pro)
|
||||
|
||||
Gpio Header:
|
||||
func des pin pin des func
|
||||
3v3 1 --o o-- 2 5v
|
||||
i2c0.sda (2502000.i2c:205) PG13 3 --o o-- 4 5v
|
||||
i2c0.sck (2502000.i2c:204) PG12 5 --o o-- 6 gnd
|
||||
free (39) PB7 7 --o o-- 8 PB8 uart0.tx (2500000.serial:40)
|
||||
gnd 9 --o o-- 10 PB9 uart0.rx (2500000.serial:41)
|
||||
free (117) PD21 11 --o o-- 12 PB5 uart5.rx (2501400.serial:37)
|
||||
free (118) PD22 13 --o o-- 14 gnd
|
||||
uart2.tx (2500800.serial:32) PB0 15 --o o-- 16 PB1 uart2.rx (2500800.serial:33)
|
||||
3v3 17 --o o-- 18 PD14 spi1.hold (4026000.spi:110)
|
||||
spi1.mosi (4026000.spi:108) PD12 19 --o o-- 20 gnd
|
||||
spi1.miso (4026000.spi:109) PD13 21 --o o-- 22 PC1 i2c2.sda (2502800.i2c:65)
|
||||
spi1.clk (4026000.spi:107) PD11 23 --o o-- 24 PD10 spi1.cs (4026000.spi:106)
|
||||
gnd 25 --o o-- 26 PD15 spi1.wp (4026000.spi:111)
|
||||
i2c3.sda (2502c00.i2c:145) PE17 27 --o o-- 28 PE16 i2c3.sck (2502c00.i2c:144)
|
||||
free (42) PB10 29 --o o-- 30 gnd
|
||||
free (43) PB11 31 --o o-- 32 PC0 i2c2.sck (2502800.i2c:64)
|
||||
free (44) PB12 33 --o o-- 34 gnd
|
||||
free (38) PB6 35 --o o-- 36 PB2 uart4.tx (2501000.serial:34)
|
||||
free (113) PD17 37 --o o-- 38 PB3 uart4.rx (2501000.serial:35)
|
||||
gnd 39 --o o-- 40 PB4 uart5.tx (2501400.serial:36)
|
||||
|
||||
Other gpio outputs of interest:
|
||||
-- PD18: Blue Status Led - gpio (2000000.pinctrl:114)
|
||||
|
||||
Notes:
|
||||
- I2C pins 3,5,27 and 28 (PG13, PG12, PE17 and PE16) have 10K pullup resistors to 3v3
|
||||
- The Status LED (PD18) is common with the LED_PWM pin on the DSI/LVDS output
|
||||
```
|
||||
@@ -1 +0,0 @@
|
||||
6.8.0-31-mqpro-spi.gpio
|
||||
33
precompiled-trees/spi/README.md
Normal file
33
precompiled-trees/spi/README.md
Normal file
@@ -0,0 +1,33 @@
|
||||
```
|
||||
MangoPI MQ Pro GPIO header (dtb name: MangoPi MQ Pro)
|
||||
|
||||
Gpio Header:
|
||||
func des pin pin des func
|
||||
3v3 1 --o o-- 2 5v
|
||||
i2c0.sda (2502000.i2c:205) PG13 3 --o o-- 4 5v
|
||||
i2c0.sck (2502000.i2c:204) PG12 5 --o o-- 6 gnd
|
||||
free (39) PB7 7 --o o-- 8 PB8 uart0.tx (2500000.serial:40)
|
||||
gnd 9 --o o-- 10 PB9 uart0.rx (2500000.serial:41)
|
||||
free (117) PD21 11 --o o-- 12 PB5 uart5.rx (2501400.serial:37)
|
||||
free (118) PD22 13 --o o-- 14 gnd
|
||||
uart2.tx (2500800.serial:32) PB0 15 --o o-- 16 PB1 uart2.rx (2500800.serial:33)
|
||||
3v3 17 --o o-- 18 PD14 spi1.hold (4026000.spi:110)
|
||||
spi1.mosi (4026000.spi:108) PD12 19 --o o-- 20 gnd
|
||||
spi1.miso (4026000.spi:109) PD13 21 --o o-- 22 PC1 i2c2.sda (2502800.i2c:65)
|
||||
spi1.clk (4026000.spi:107) PD11 23 --o o-- 24 PD10 spi1.cs (4026000.spi:106)
|
||||
gnd 25 --o o-- 26 PD15 spi1.wp (4026000.spi:111)
|
||||
i2c3.sda (2502c00.i2c:145) PE17 27 --o o-- 28 PE16 i2c3.sck (2502c00.i2c:144)
|
||||
free (42) PB10 29 --o o-- 30 gnd
|
||||
free (43) PB11 31 --o o-- 32 PC0 i2c2.sck (2502800.i2c:64)
|
||||
free (44) PB12 33 --o o-- 34 gnd
|
||||
free (38) PB6 35 --o o-- 36 PB2 uart4.tx (2501000.serial:34)
|
||||
free (113) PD17 37 --o o-- 38 PB3 uart4.rx (2501000.serial:35)
|
||||
gnd 39 --o o-- 40 PB4 uart5.tx (2501400.serial:36)
|
||||
|
||||
Other gpio outputs of interest:
|
||||
-- PD18: Blue Status Led - gpio (2000000.pinctrl:114)
|
||||
|
||||
Notes:
|
||||
- I2C pins 3,5,27 and 28 (PG13, PG12, PE17 and PE16) have 10K pullup resistors to 3v3
|
||||
- The Status LED (PD18) is common with the LED_PWM pin on the DSI/LVDS output
|
||||
```
|
||||
Binary file not shown.
File diff suppressed because it is too large
Load Diff
@@ -1 +0,0 @@
|
||||
6.8.0-31-mqpro-sunxi.gpio
|
||||
Reference in New Issue
Block a user