riscv: cpu: jh7110: Add support for jh7110 SoC

Add StarFive JH7110 SoC to support RISC-V arch.

Signed-off-by: Yanhong Wang <yanhong.wang@starfivetech.com>
Reviewed-by: Rick Chen <rick@andestech.com>
Tested-by: Conor Dooley <conor.dooley@microchip.com>
This commit is contained in:
Yanhong Wang 2023-03-29 11:42:08 +08:00 committed by Leo Yu-Chi Liang
parent 5db4972a5b
commit 218534153e
6 changed files with 166 additions and 0 deletions

View File

@ -0,0 +1,10 @@
# SPDX-License-Identifier: GPL-2.0+
#
# Copyright (C) 2022 StarFive Technology Co., Ltd.
ifeq ($(CONFIG_SPL_BUILD),y)
obj-y += spl.o
else
obj-y += cpu.o
obj-y += dram.o
endif

View File

@ -0,0 +1,23 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2022 StarFive Technology Co., Ltd.
* Author: Yanhong Wang <yanhong.wang@starfivetech.com>
*/
#include <asm/cache.h>
#include <irq_func.h>
/*
* cleanup_before_linux() is called just before we call linux
* it prepares the processor for linux
*
* we disable interrupt and caches.
*/
int cleanup_before_linux(void)
{
disable_interrupts();
cache_flush();
return 0;
}

View File

@ -0,0 +1,38 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2022 StarFive Technology Co., Ltd.
* Author: Yanhong Wang <yanhong.wang@starfivetech.com>
*/
#include <common.h>
#include <fdtdec.h>
#include <init.h>
#include <linux/sizes.h>
DECLARE_GLOBAL_DATA_PTR;
int dram_init(void)
{
return fdtdec_setup_mem_size_base();
}
int dram_init_banksize(void)
{
return fdtdec_setup_memory_banksize();
}
phys_size_t board_get_usable_ram_top(phys_size_t total_size)
{
/*
* Ensure that we run from first 4GB so that all
* addresses used by U-Boot are 32bit addresses.
*
* This in-turn ensures that 32bit DMA capable
* devices work fine because DMA mapping APIs will
* provide 32bit DMA addresses only.
*/
if (IS_ENABLED(CONFIG_64BIT) && gd->ram_top > SZ_4G)
return SZ_4G;
return gd->ram_top;
}

View File

@ -0,0 +1,64 @@
// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (C) 2022 StarFive Technology Co., Ltd.
* Author: Yanhong Wang<yanhong.wang@starfivetech.com>
*/
#include <asm/csr.h>
#include <asm/sections.h>
#include <dm.h>
#include <log.h>
#define CSR_U74_FEATURE_DISABLE 0x7c1
#define L2_LIM_MEM_END 0x81FFFFFUL
int spl_soc_init(void)
{
int ret;
struct udevice *dev;
/* DDR init */
ret = uclass_get_device(UCLASS_RAM, 0, &dev);
if (ret) {
debug("DRAM init failed: %d\n", ret);
return ret;
}
return 0;
}
void harts_early_init(void)
{
ulong *ptr;
u8 *tmp;
ulong len, remain;
/*
* Feature Disable CSR
*
* Clear feature disable CSR to '0' to turn on all features for
* each core. This operation must be in M-mode.
*/
if (CONFIG_IS_ENABLED(RISCV_MMODE))
csr_write(CSR_U74_FEATURE_DISABLE, 0);
/* clear L2 LIM memory
* set __bss_end to 0x81FFFFF region to zero
* The L2 Cache Controller supports ECC. ECC is applied to SRAM.
* If it is not cleared, the ECC part is invalid, and an ECC error
* will be reported when reading data.
*/
ptr = (ulong *)&__bss_end;
len = L2_LIM_MEM_END - (ulong)&__bss_end;
remain = len % sizeof(ulong);
len /= sizeof(ulong);
while (len--)
*ptr++ = 0;
/* clear the remain bytes */
if (remain) {
tmp = (u8 *)ptr;
while (remain--)
*tmp++ = 0;
}
}

View File

@ -0,0 +1,19 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2022 StarFive Technology Co., Ltd.
* Author: Yanhong Wang <yanhong.wang@starfivetech.com>
*/
#ifndef __STARFIVE_JH7110_REGS_H
#define __STARFIVE_JH7110_REGS_H
#define JH7110_SYS_CRG 0x13020000
#define JH7110_SYS_SYSCON 0x13030000
#define JH7110_SYS_IOMUX 0x13040000
#define JH7110_AON_CRG 0x17000000
#define JH7110_AON_SYSCON 0x17010000
#define JH7110_BOOT_MODE_SELECT_REG 0x1702002c
#define JH7110_BOOT_MODE_SELECT_MASK GENMASK(1, 0)
#endif /* __STARFIVE_JH7110_REGS_H */

View File

@ -0,0 +1,12 @@
/* SPDX-License-Identifier: GPL-2.0+ */
/*
* Copyright (C) 2022 StarFive Technology Co., Ltd.
* Author: Yanhong Wang <yanhong.wang@starfivetech.com>
*/
#ifndef _SPL_STARFIVE_H
#define _SPL_STARFIVE_H
int spl_soc_init(void);
#endif /* _SPL_STARFIVE_H */