Merge tag 'u-boot-rockchip-20200607' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip

- revive rk3399 puma board to adapt mainline dts;
- Fix rk3399-evb stdout path;
- Enable PCIe for rk3399: Rockpro64, firefly, pinebookpro;
- Add rk3328 Rock-pi-e board;
- Enable SPI boot for rockpro64 and roc-pc-rk3399;

Makefile

@@ -1438,22 +1438,15 @@ u-boot-with-spl.bin: $(SPL_IMAGE) $(SPL_PAYLOAD) FORCE
 
 ifeq ($(CONFIG_ARCH_ROCKCHIP),y)
 
-# rockchip image type
-ifeq ($(CONFIG_SPL_SPI_LOAD),y)
-ROCKCHIP_IMG_TYPE := rkspi
-else
-ROCKCHIP_IMG_TYPE := rksd
-endif
-
 # TPL + SPL
 ifeq ($(CONFIG_SPL)$(CONFIG_TPL),yy)
-MKIMAGEFLAGS_u-boot-tpl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE)
+MKIMAGEFLAGS_u-boot-tpl-rockchip.bin = -n $(CONFIG_SYS_SOC) -T rksd
 tpl/u-boot-tpl-rockchip.bin: tpl/u-boot-tpl.bin FORCE
 	$(call if_changed,mkimage)
 idbloader.img: tpl/u-boot-tpl-rockchip.bin spl/u-boot-spl.bin FORCE
 	$(call if_changed,cat)
 else
-MKIMAGEFLAGS_idbloader.img = -n $(CONFIG_SYS_SOC) -T $(ROCKCHIP_IMG_TYPE)
+MKIMAGEFLAGS_idbloader.img = -n $(CONFIG_SYS_SOC) -T rksd
 idbloader.img: spl/u-boot-spl.bin FORCE
 	$(call if_changed,mkimage)
 endif

arch/arm/dts/Makefile

@@ -107,7 +107,8 @@ dtb-$(CONFIG_ROCKCHIP_RK3308) += \
 dtb-$(CONFIG_ROCKCHIP_RK3328) += \
 	rk3328-evb.dtb \
 	rk3328-roc-cc.dtb \
-	rk3328-rock64.dtb
+	rk3328-rock64.dtb \
+	rk3328-rock-pi-e.dtb
 
 dtb-$(CONFIG_ROCKCHIP_RK3368) += \
 	rk3368-lion.dtb \
@@ -130,9 +131,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \
 	rk3399-nanopi-neo4.dtb \
 	rk3399-orangepi.dtb \
 	rk3399-pinebook-pro.dtb \
-	rk3399-puma-ddr1333.dtb \
+	rk3399-puma-haikou.dtb \
-	rk3399-puma-ddr1600.dtb \
-	rk3399-puma-ddr1866.dtb \
 	rk3399-roc-pc.dtb \
 	rk3399-roc-pc-mezzanine.dtb \
 	rk3399-rock-pi-4.dtb \

arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi

@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2020 Radxa
+ */
+
+#include "rk3328-u-boot.dtsi"
+#include "rk3328-sdram-ddr3-666.dtsi"
+
+&gpio0 {
+	u-boot,dm-spl;
+};
+
+&pinctrl {
+	u-boot,dm-spl;
+};
+
+&sdmmc0m1_gpio {
+	u-boot,dm-spl;
+};
+
+&pcfg_pull_up_4ma {
+	u-boot,dm-spl;
+};
+
+&usb_host0_xhci {
+	vbus-supply = <&vcc5v0_host_xhci>;
+	status = "okay";
+};
+
+/* Need this and all the pinctrl/gpio stuff above to set pinmux */
+&vcc_sd {
+	u-boot,dm-spl;
+};

arch/arm/dts/rk3328-rock-pi-e.dts

@@ -0,0 +1,267 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2020 Radxa
+ */
+
+/dts-v1/;
+#include "rk3328.dtsi"
+
+/ {
+	model = "Radxa Rockpi E";
+	compatible = "radxa,rock-pi-e", "rockchip,rk3328";
+
+	chosen {
+	stdout-path = "serial2:1500000n8";
+	};
+
+	gmac_clkin: external-gmac-clock {
+	compatible = "fixed-clock";
+	clock-frequency = <125000000>;
+	clock-output-names = "gmac_clkin";
+	#clock-cells = <0>;
+	};
+
+	vcc_sd: sdmmc-regulator {
+	compatible = "regulator-fixed";
+	gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0m1_gpio>;
+	regulator-name = "vcc_sd";
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	vin-supply = <&vcc_io>;
+	};
+
+	vcc5v0_host_xhci: vcc5v0-host-xhci-drv {
+	compatible = "regulator-fixed";
+	enable-active-high;
+	regulator-name = "vcc5v0_host_xhci";
+	gpio = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
+	regulator-min-microvolt = <5000000>;
+	regulator-max-microvolt = <5000000>;
+	};
+
+	vcc_sys: vcc-sys {
+	compatible = "regulator-fixed";
+	regulator-name = "vcc_sys";
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-min-microvolt = <5000000>;
+	regulator-max-microvolt = <5000000>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&emmc {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	supports-emmc;
+	disable-wp;
+	non-removable;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
+	vmmc-supply = <&vcc_io>;
+	vqmmc-supply = <&vcc18_emmc>;
+	status = "okay";
+};
+
+&gmac2io {
+	assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
+	assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
+	clock_in_out = "input";
+	phy-supply = <&vcc_io>;
+	phy-mode = "rgmii";
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmiim1_pins>;
+	snps,force_thresh_dma_mode;
+	snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+	snps,reset-active-low;
+	snps,reset-delays-us = <0 10000 50000>;
+	tx_delay = <0x26>;
+	rx_delay = <0x11>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	rk805: rk805@18 {
+	compatible = "rockchip,rk805";
+	status = "okay";
+	reg = <0x18>;
+	interrupt-parent = <&gpio2>;
+	interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
+	#clock-cells = <1>;
+	clock-output-names = "xin32k", "rk805-clkout2";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pmic_int_l>;
+	rockchip,system-power-controller;
+	wakeup-source;
+
+	vcc1-supply = <&vcc_sys>;
+	vcc2-supply = <&vcc_sys>;
+	vcc3-supply = <&vcc_sys>;
+	vcc4-supply = <&vcc_sys>;
+	vcc5-supply = <&vcc_io>;
+	vcc6-supply = <&vcc_sys>;
+
+	regulators {
+	vdd_logic: DCDC_REG1 {
+	regulator-name = "vdd_logic";
+	regulator-min-microvolt = <712500>;
+	regulator-max-microvolt = <1450000>;
+	regulator-ramp-delay = <12500>;
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-state-mem {
+	regulator-on-in-suspend;
+	regulator-suspend-microvolt = <1000000>;
+	};
+	};
+
+	vdd_arm: DCDC_REG2 {
+	regulator-name = "vdd_arm";
+	regulator-min-microvolt = <712500>;
+	regulator-max-microvolt = <1450000>;
+	regulator-ramp-delay = <12500>;
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-state-mem {
+	regulator-on-in-suspend;
+	regulator-suspend-microvolt = <950000>;
+	};
+	};
+
+	vcc_ddr: DCDC_REG3 {
+	regulator-name = "vcc_ddr";
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-state-mem {
+	regulator-on-in-suspend;
+	};
+	};
+
+	vcc_io: DCDC_REG4 {
+	regulator-name = "vcc_io";
+	regulator-min-microvolt = <3300000>;
+	regulator-max-microvolt = <3300000>;
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-state-mem {
+	regulator-on-in-suspend;
+	regulator-suspend-microvolt = <3300000>;
+	};
+	};
+
+	vcc_18: LDO_REG1 {
+	regulator-name = "vcc_18";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-state-mem {
+	regulator-on-in-suspend;
+	regulator-suspend-microvolt = <1800000>;
+	};
+	};
+
+	vcc18_emmc: LDO_REG2 {
+	regulator-name = "vcc18_emmc";
+	regulator-min-microvolt = <1800000>;
+	regulator-max-microvolt = <1800000>;
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-state-mem {
+	regulator-on-in-suspend;
+	regulator-suspend-microvolt = <1800000>;
+	};
+	};
+
+	vdd_10: LDO_REG3 {
+	regulator-name = "vdd_10";
+	regulator-min-microvolt = <1000000>;
+	regulator-max-microvolt = <1000000>;
+	regulator-always-on;
+	regulator-boot-on;
+	regulator-state-mem {
+	regulator-on-in-suspend;
+	regulator-suspend-microvolt = <1000000>;
+	};
+	};
+	};
+	};
+};
+
+&io_domains {
+	status = "okay";
+
+	vccio1-supply = <&vcc_io>;
+	vccio2-supply = <&vcc18_emmc>;
+	vccio3-supply = <&vcc_io>;
+	vccio4-supply = <&vcc_io>;
+	vccio5-supply = <&vcc_io>;
+	vccio6-supply = <&vcc_io>;
+	pmuio-supply = <&vcc_io>;
+};
+
+&pinctrl {
+	pmic {
+	pmic_int_l: pmic-int-l {
+	rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
+	};
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	card-detect-delay = <200>;
+	disable-wp;
+	max-frequency = <150000000>;
+	num-slots = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
+	supports-sd;
+	vmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&saradc {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb20_otg {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};

arch/arm/dts/rk3399-evb-u-boot.dtsi

@@ -8,6 +8,7 @@
 
 / {
 	chosen {
+		stdout-path = "serial2:1500000n8";
 		u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
 	};
 };

arch/arm/dts/rk3399-puma-ddr1333-u-boot.dtsi

@@ -1,4 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-#include "rk3399-puma-u-boot.dtsi"
-#include "rk3399-sdram-ddr3-1333.dtsi"

arch/arm/dts/rk3399-puma-ddr1333.dts

@@ -1,8 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
-/*
- * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
- */
-
-/dts-v1/;
-
-#include "rk3399-puma.dtsi"

arch/arm/dts/rk3399-puma-ddr1600-u-boot.dtsi

@@ -1,4 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-#include "rk3399-puma-u-boot.dtsi"
-#include "rk3399-sdram-ddr3-1600.dtsi"

arch/arm/dts/rk3399-puma-ddr1600.dts

@@ -1,9 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
-/*
- * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
- */
-
-/dts-v1/;
-
-#include "rk3399-puma.dtsi"
-#include "rk3399-u-boot.dtsi"

arch/arm/dts/rk3399-puma-ddr1866-u-boot.dtsi

@@ -1,4 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-#include "rk3399-puma-u-boot.dtsi"
-#include "rk3399-sdram-ddr3-1866.dtsi"

arch/arm/dts/rk3399-puma-ddr1866.dts

@@ -1,8 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR X11
-/*
- * (C) Copyright 2017 Theobroma Systems Design und Consulting GmbH
- */
-
-/dts-v1/;
-
-#include "rk3399-puma.dtsi"

arch/arm/dts/rk3399-puma-haikou-u-boot.dtsi

@@ -1,25 +1,36 @@
 // SPDX-License-Identifier: GPL-2.0+
 
 #include "rk3399-u-boot.dtsi"
+
+#ifdef CONFIG_TARGET_PUMA_RK3399_RAM_DDR3_1333
+#include "rk3399-sdram-ddr3-1333.dtsi"
+#endif
+#ifdef CONFIG_TARGET_PUMA_RK3399_RAM_DDR3_1600
+#include "rk3399-sdram-ddr3-1600.dtsi"
+#endif
+#ifdef CONFIG_TARGET_PUMA_RK3399_RAM_DDR3_1866
+#include "rk3399-sdram-ddr3-1866.dtsi"
+#endif
+
 / {
-       config {
+	config {
-               u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */
+		u-boot,spl-payload-offset = <0x40000>; /* @ 256KB */
-               u-boot,mmc-env-offset = <0x4000>;      /* @  16KB */
+		u-boot,mmc-env-offset = <0x4000>;      /* @  16KB */
-               u-boot,efi-partition-entries-offset = <0x200000>; /* 2MB */
+		u-boot,efi-partition-entries-offset = <0x200000>; /* 2MB */
-               u-boot,boot-led = "module_led";
+		u-boot,boot-led = "module_led";
-               sysreset-gpio = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;
+		sysreset-gpio = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;
-       };
+	};
 
-       chosen {
+	chosen {
-               stdout-path = "serial0:115200n8";
+		stdout-path = "serial0:115200n8";
-               u-boot,spl-boot-order = \
+		u-boot,spl-boot-order = \
 			"same-as-spl", &norflash, &sdhci, &sdmmc;
-       };
+	};
 
-       aliases {
+	aliases {
-               spi0 = &spi1;
+		spi0 = &spi1;
-               spi1 = &spi5;
+		spi1 = &spi5;
-       };
+	};
 
 	/*
 	 * The Qseven BIOS_DISABLE signal on the RK3399-Q7 keeps the on-module

arch/arm/dts/rk3399-puma-haikou.dts

@@ -0,0 +1,271 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
+ */
+
+/dts-v1/;
+#include "rk3399-puma.dtsi"
+
+/ {
+	model = "Theobroma Systems RK3399-Q7 SoM";
+	compatible = "tsd,rk3399-puma-haikou", "rockchip,rk3399";
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		pinctrl-0 = <&led_pin_module>, <&led_sd_haikou>;
+
+		sd-card-led {
+			label = "sd_card_led";
+			gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "mmc0";
+		};
+	};
+
+	i2s0-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "Haikou,I2S-codec";
+		simple-audio-card,mclk-fs = <512>;
+
+		simple-audio-card,codec {
+			clocks = <&sgtl5000_clk>;
+			sound-dai = <&sgtl5000>;
+		};
+
+		simple-audio-card,cpu {
+			bitclock-master;
+			frame-master;
+			sound-dai = <&i2s0>;
+		};
+	};
+
+	sgtl5000_clk: sgtl5000-oscillator  {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency  = <24576000>;
+	};
+
+	dc_12v: dc-12v {
+		compatible = "regulator-fixed";
+		regulator-name = "dc_12v";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_baseboard: vcc3v3-baseboard {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_baseboard: vcc5v0-baseboard {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_baseboard";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&dc_12v>;
+	};
+
+	vcc5v0_otg: vcc5v0-otg-regulator {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&otg_vbus_drv>;
+		regulator-name = "vcc5v0_otg";
+		regulator-always-on;
+	};
+
+	vdda_codec: vdda-codec {
+		compatible = "regulator-fixed";
+		regulator-name = "vdda_codec";
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_baseboard>;
+	};
+
+	vddd_codec: vddd-codec {
+		compatible = "regulator-fixed";
+		regulator-name = "vddd_codec";
+		regulator-boot-on;
+		regulator-min-microvolt = <1600000>;
+		regulator-max-microvolt = <1600000>;
+		vin-supply = <&vcc5v0_baseboard>;
+	};
+};
+
+&hdmi {
+	ddc-i2c-bus = <&i2c3>;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&i2c2 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&i2c3 {
+	i2c-scl-rising-time-ns = <450>;
+	i2c-scl-falling-time-ns = <15>;
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+	clock-frequency = <400000>;
+
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0x0a>;
+		clocks = <&sgtl5000_clk>;
+		#sound-dai-cells = <0>;
+		VDDA-supply = <&vdda_codec>;
+		VDDIO-supply = <&vdda_codec>;
+		VDDD-supply = <&vddd_codec>;
+		status = "okay";
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	clock-frequency = <400000>;
+};
+
+&pcie_phy {
+	status = "okay";
+};
+
+&pcie0 {
+	ep-gpios = <&gpio4 RK_PC6 GPIO_ACTIVE_HIGH>;
+	num-lanes = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie_clkreqn_cpm>;
+	status = "okay";
+};
+
+&pinctrl {
+	pinctrl-names = "default";
+	pinctrl-0 = <&haikou_pin_hog>;
+
+	hog {
+		haikou_pin_hog: haikou-pin-hog {
+			rockchip,pins =
+			  /* LID_BTN */
+			  <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* BATLOW# */
+			  <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* SLP_BTN# */
+			  <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_up>,
+			  /* BIOS_DISABLE# */
+			  <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		led_sd_haikou: led-sd-gpio {
+			rockchip,pins =
+			  <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb2 {
+		otg_vbus_drv: otg-vbus-drv {
+			rockchip,pins =
+			  <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	max-frequency = <150000000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_cd &sdmmc_bus4>;
+	vmmc-supply = <&vcc3v3_baseboard>;
+	status = "okay";
+};
+
+&spi5 {
+	status = "okay";
+};
+
+&tcphy0 {
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&usbdrd3_0 {
+	status = "okay";
+};
+
+&usbdrd_dwc3_0 {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&u2phy0_host {
+	phy-supply = <&vcc5v0_otg>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&vopb {
+	status = "okay";
+};
+
+&vopb_mmu {
+	status = "okay";
+};
+
+&vopl {
+	status = "okay";
+};
+
+&vopl_mmu {
+	status = "okay";
+};

arch/arm/dts/rk3399-puma.dtsi

@@ -101,7 +101,7 @@
 
 	vcc5v0_host: vcc5v0-host-regulator {
 		compatible = "regulator-fixed";
-		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
+		gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_LOW>;
 		enable-active-low;
 		pinctrl-names = "default";
 		pinctrl-0 = <&vcc5v0_host_en>;
@@ -157,7 +157,7 @@
 	phy-mode = "rgmii";
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii_pins>;
-	snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
+	snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
 	snps,reset-active-low;
 	snps,reset-delays-us = <0 10000 50000>;
 	tx_delay = <0x10>;

arch/arm/dts/rk3399-roc-pc-u-boot.dtsi

@@ -12,7 +12,11 @@
 	};
 
 	chosen {
-		u-boot,spl-boot-order = "same-as-spl", &sdhci, &sdmmc;
+		u-boot,spl-boot-order = "same-as-spl", &spi_flash, &sdhci, &sdmmc;
+	};
+
+	config {
+		u-boot,spl-payload-offset = <0x60000>; /* @ 384KB */
 	};
 
 	vcc_hub_en: vcc_hub_en-regulator {
@@ -40,6 +44,12 @@
 	vin-supply = <&vcc_vbus_typec0>;
 };
 
+&spi1 {
+	spi_flash: flash@0 {
+		u-boot,dm-pre-reloc;
+	};
+};
+
 &vdd_log {
 	regulator-min-microvolt = <430000>;
 	regulator-init-microvolt = <950000>;

arch/arm/dts/rk3399-rockpro64-u-boot.dtsi

@@ -11,7 +11,17 @@
 	};
 
 	chosen {
-		u-boot,spl-boot-order = "same-as-spl", &sdmmc, &sdhci;
+		u-boot,spl-boot-order = "same-as-spl", &spi_flash, &sdmmc, &sdhci;
+	};
+
+	config {
+		u-boot,spl-payload-offset = <0x60000>; /* @ 384KB */
+	};
+};
+
+&spi1 {
+	spi_flash: flash@0 {
+		u-boot,dm-pre-reloc;
 	};
 };
 

board/rockchip/evb_rk3328/MAINTAINERS

@@ -17,3 +17,10 @@ M:      Matwey V. Kornilov <matwey.kornilov@gmail.com>
 S:      Maintained
 F:      configs/rock64-rk3328_defconfig
 F:      arch/arm/dts/rk3328-rock64-u-boot.dtsi
+
+ROCKPIE-RK3328
+M:      Banglang Huang <banglang.huang@foxmail.com>
+S:      Maintained
+F:      configs/rock-pi-e-rk3328_defconfig
+F:      arch/arm/dts/rk3328-rock-pi-e.dts
+F:      arch/arm/dts/rk3328-rock-pi-e-u-boot.dtsi

board/theobroma-systems/puma_rk3399/Kconfig

@@ -18,4 +18,19 @@ config ENV_SIZE
 config ENV_OFFSET
 	default 0x3fc000 if ENV_IS_IN_SPI_FLASH
 
+choice
+	prompt "Theobroma Systems RK3399-Q7 DDR Option"
+	default TARGET_PUMA_RK3399_RAM_DDR3_1333
+
+config TARGET_PUMA_RK3399_RAM_DDR3_1333
+	bool "DDR3-1333MHz"
+
+config TARGET_PUMA_RK3399_RAM_DDR3_1600
+	bool "DDR3-1600MHz"
+
+config TARGET_PUMA_RK3399_RAM_DDR3_1866
+	bool "DDR3-1866MHz"
+
+endchoice
+
 endif

board/theobroma-systems/puma_rk3399/fit_spl_atf.sh

@@ -1,94 +0,0 @@
-#!/bin/sh
-#
-# SPDX-License-Identifier:      GPL-2.0+
-#
-# Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
-#
-# Based on the board/sunxi/mksunxi_fit_atf.sh
-#
-# Script to generate FIT image source for 64-bit puma boards with
-# U-Boot proper, ATF, PMU firmware and devicetree.
-#
-# usage: $0 <dt_name> [<dt_name> [<dt_name] ...]
-
-[ -z "$BL31" ] && BL31="bl31.bin"
-
-if [ ! -f $BL31 ]; then
-	echo "WARNING: BL31 file $BL31 NOT found, resulting binary is non-functional" >&2
-	echo "Please read Building section in doc/README.rockchip" >&2
-	BL31=/dev/null
-fi
-
-[ -z "$PMUM0" ] && PMUM0="rk3399m0.bin"
-
-if [ ! -f $PMUM0 ]; then
-	echo "WARNING: PMUM0 file $PMUM0 NOT found, resulting binary is non-functional" >&2
-	echo "Please read Building section in doc/README.rockchip" >&2
-	PMUM0=/dev/null
-fi
-
-cat << __HEADER_EOF
-/* SPDX-License-Identifier: GPL-2.0+ OR X11 */
-/*
- * Copyright (C) 2017 Theobroma Systems Design und Consulting GmbH
- *
- * Minimal dts for a SPL FIT image payload.
- */
-
-/dts-v1/;
-
-/ {
-	description = "FIT image with U-Boot proper, ATF bl31, M0 Firmware, DTB";
-	#address-cells = <1>;
-
-	images {
-		uboot {
-			description = "U-Boot (64-bit)";
-			data = /incbin/("u-boot-nodtb.bin");
-			type = "standalone";
-			arch = "arm64";
-			compression = "none";
-			load = <0x4a000000>;
-		};
-		atf {
-			description = "ARM Trusted Firmware";
-			data = /incbin/("$BL31");
-			type = "firmware";
-			arch = "arm64";
-			os = "arm-trusted-firmware";
-			compression = "none";
-			load = <0x1000>;
-			entry = <0x1000>;
-		};
-		pmu {
-		        description = "Cortex-M0 firmware";
-			data = /incbin/("$PMUM0");
-			type = "pmu-firmware";
-			compression = "none";
-			load = <0x180000>;
-                };
-		fdt {
-			description = "RK3399-Q7 (Puma) flat device-tree";
-			data = /incbin/("$1");
-			type = "flat_dt";
-			compression = "none";
-		};
-__HEADER_EOF
-
-cat << __CONF_HEADER_EOF
-	};
-
-	configurations {
-		default = "conf";
-		conf {
-			description = "Theobroma Systems RK3399-Q7 (Puma) SoM";
-			firmware = "atf";
-			loadables = "uboot", "pmu";
-			fdt = "fdt";
-		};
-__CONF_HEADER_EOF
-
-cat << __ITS_EOF
-	};
-};
-__ITS_EOF

board/theobroma-systems/puma_rk3399/puma-rk3399.c

@@ -114,22 +114,22 @@ static int setup_boottargets(void)
 
 int misc_init_r(void)
 {
-       const u32 cpuid_offset = 0x7;
+	const u32 cpuid_offset = 0x7;
-       const u32 cpuid_length = 0x10;
+	const u32 cpuid_length = 0x10;
-       u8 cpuid[cpuid_length];
+	u8 cpuid[cpuid_length];
-       int ret;
+	int ret;
 
-       ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid);
+	ret = rockchip_cpuid_from_efuse(cpuid_offset, cpuid_length, cpuid);
-       if (ret)
+	if (ret)
-               return ret;
+		return ret;
 
-       ret = rockchip_cpuid_set(cpuid, cpuid_length);
+	ret = rockchip_cpuid_set(cpuid, cpuid_length);
-       if (ret)
+	if (ret)
-               return ret;
+		return ret;
 
-       ret = rockchip_setup_macaddr();
+	ret = rockchip_setup_macaddr();
-       if (ret)
+	if (ret)
-               return ret;
+		return ret;
 
 	setup_iodomain();
 	setup_boottargets();
@@ -152,70 +152,3 @@ void get_board_serial(struct tag_serialnr *serialnr)
 	serialnr->low = (u32)(serial & 0xffffffff);
 }
 #endif
-
-/**
- * Switch power at an external regulator (for our root hub).
- *
- * @param ctrl pointer to the xHCI controller
- * @param port port number as in the control message (one-based)
- * @param enable boolean indicating whether to enable or disable power
- * @return returns 0 on success, an error-code on failure
- */
-static int board_usb_port_power_set(struct udevice *dev, int port,
-				    bool enable)
-{
-#if CONFIG_IS_ENABLED(OF_CONTROL) && CONFIG_IS_ENABLED(DM_REGULATOR)
-	/* We start counting ports at 0, while USB counts from 1. */
-	int index = port - 1;
-	const char *regname = NULL;
-	struct udevice *regulator;
-	const char *prop = "tsd,usb-port-power";
-	int ret;
-
-	debug("%s: ctrl '%s' port %d enable %s\n", __func__,
-	      dev_read_name(dev), port, enable ? "true" : "false");
-
-	ret = dev_read_string_index(dev, prop, index, &regname);
-	if (ret < 0) {
-		debug("%s: ctrl '%s' port %d: no entry in '%s'\n",
-		      __func__, dev_read_name(dev), port, prop);
-		return ret;
-	}
-
-	ret = regulator_get_by_platname(regname, &regulator);
-	if (ret) {
-		debug("%s: ctrl '%s' port %d: could not get regulator '%s'\n",
-		      __func__, dev_read_name(dev), port, regname);
-		return ret;
-	}
-
-	regulator_set_enable(regulator, enable);
-	return 0;
-#else
-	return -ENOTSUPP;
-#endif
-}
-
-void usb_hub_reset_devices(struct usb_hub_device *hub, int port)
-{
-	struct udevice *dev = hub->pusb_dev->dev;
-	struct udevice *ctrl;
-
-	/* We are only interested in our root-hubs */
-	if (usb_hub_is_root_hub(dev) == false)
-		return;
-
-	ctrl = usb_get_bus(dev);
-	if (!ctrl) {
-		debug("%s: could not retrieve ctrl for hub\n", __func__);
-		return;
-	}
-
-	/*
-	 * To work around an incompatibility between the single-threaded
-	 * USB stack in U-Boot and (a strange low-power mode of) the USB
-	 * hub we have on-module, we need to delay powering on the hub
-	 * until the first time the port is probed.
-	 */
-	board_usb_port_power_set(ctrl, port, true);
-}

configs/firefly-rk3399_defconfig

@@ -19,6 +19,7 @@ CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_PCI=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TIME=y
 CONFIG_SPL_OF_CONTROL=y
@@ -38,10 +39,13 @@ CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
+CONFIG_NVME=y
+CONFIG_PCI=y
 CONFIG_PMIC_RK8XX=y
 CONFIG_REGULATOR_PWM=y
 CONFIG_REGULATOR_RK8XX=y
 CONFIG_PWM_ROCKCHIP=y
+CONFIG_DM_RESET=y
 CONFIG_BAUDRATE=1500000
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYSRESET=y

configs/pinebook-pro-rk3399_defconfig

@@ -23,6 +23,7 @@ CONFIG_CMD_GPIO=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
+CONFIG_CMD_PCI=y
 CONFIG_CMD_USB=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TIME=y
@@ -47,12 +48,15 @@ CONFIG_SF_DEFAULT_SPEED=20000000
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_DM_ETH=y
+CONFIG_NVME=y
+CONFIG_PCI=y
 CONFIG_DM_PMIC_FAN53555=y
 CONFIG_PMIC_RK8XX=y
 CONFIG_REGULATOR_PWM=y
 CONFIG_REGULATOR_RK8XX=y
 CONFIG_PWM_ROCKCHIP=y
 CONFIG_RAM_RK3399_LPDDR4=y
+CONFIG_DM_RESET=y
 CONFIG_BAUDRATE=1500000
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_ROCKCHIP_SPI=y

configs/puma-rk3399_defconfig

@@ -14,7 +14,6 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_SPL_TEXT_BASE=0xff8c2000
 CONFIG_DEBUG_UART=y
-CONFIG_SPL_FIT_GENERATOR="board/theobroma-systems/puma_rk3399/fit_spl_atf.sh"
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-puma-haikou.dtb"
 CONFIG_MISC_INIT_R=y
 CONFIG_DISPLAY_BOARDINFO_LATE=y
@@ -39,7 +38,7 @@ CONFIG_CMD_PMIC=y
 CONFIG_CMD_REGULATOR=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_LIVE=y
-CONFIG_DEFAULT_DEVICE_TREE="rk3399-puma-ddr1600"
+CONFIG_DEFAULT_DEVICE_TREE="rk3399-puma-haikou"
 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
 CONFIG_ENV_IS_IN_MMC=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
@@ -60,6 +59,8 @@ CONFIG_PHY_MICREL_KSZ90X1=y
 CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
+CONFIG_PHY_ROCKCHIP_TYPEC=y
 CONFIG_DM_PMIC_FAN53555=y
 CONFIG_PMIC_RK8XX=y
 CONFIG_SPL_DM_REGULATOR=y
@@ -68,6 +69,7 @@ CONFIG_SPL_DM_REGULATOR_FIXED=y
 CONFIG_DM_REGULATOR_GPIO=y
 CONFIG_REGULATOR_RK8XX=y
 CONFIG_PWM_ROCKCHIP=y
+CONFIG_DM_RESET=y
 CONFIG_DM_RTC=y
 CONFIG_RTC_ISL1208=y
 CONFIG_DEBUG_UART_SHIFT=2
@@ -78,6 +80,8 @@ CONFIG_USB_XHCI_HCD=y
 CONFIG_USB_XHCI_DWC3=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_DWC3=y
+CONFIG_USB_DWC3_GENERIC=y
 CONFIG_USB_HOST_ETHER=y
 CONFIG_USB_ETHER_ASIX=y
 CONFIG_USB_ETHER_ASIX88179=y

configs/roc-pc-mezzanine-rk3399_defconfig

@@ -1,18 +1,23 @@
 CONFIG_ARM=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_SYS_TEXT_BASE=0x00200000
-CONFIG_ENV_OFFSET=0x3F8000
+CONFIG_ENV_SIZE=0x6000
+CONFIG_ENV_OFFSET=0x460000
+CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_TARGET_ROC_PC_RK3399=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_DEBUG_UART=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-roc-pc-mezzanine.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
+CONFIG_SPL_SPI_LOAD=y
 CONFIG_TPL=y
 CONFIG_TPL_GPIO_SUPPORT=y
 CONFIG_CMD_BOOTZ=y
@@ -25,7 +30,7 @@ CONFIG_CMD_TIME=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="rk3399-roc-pc-mezzanine"
 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
-CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y

configs/roc-pc-rk3399_defconfig

@@ -1,18 +1,23 @@
 CONFIG_ARM=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_SYS_TEXT_BASE=0x00200000
-CONFIG_ENV_OFFSET=0x3F8000
+CONFIG_ENV_SIZE=0x6000
+CONFIG_ENV_OFFSET=0x460000
+CONFIG_ENV_SECT_SIZE=0x1000
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_TARGET_ROC_PC_RK3399=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_DEBUG_UART=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-roc-pc.dtb"
 CONFIG_DISPLAY_BOARDINFO_LATE=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
+CONFIG_SPL_SPI_LOAD=y
 CONFIG_TPL=y
 CONFIG_TPL_GPIO_SUPPORT=y
 CONFIG_CMD_BOOTZ=y
@@ -24,7 +29,7 @@ CONFIG_CMD_TIME=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="rk3399-roc-pc"
 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
-CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y

configs/rock-pi-e-rk3328_defconfig

@@ -0,0 +1,104 @@
+CONFIG_ARM=y
+CONFIG_ARCH_ROCKCHIP=y
+CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_SPL_GPIO_SUPPORT=y
+CONFIG_ENV_OFFSET=0x3F8000
+CONFIG_ROCKCHIP_RK3328=y
+CONFIG_TPL_ROCKCHIP_COMMON_BOARD=y
+CONFIG_TPL_LIBCOMMON_SUPPORT=y
+CONFIG_TPL_LIBGENERIC_SUPPORT=y
+CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_SPL_STACK_R_ADDR=0x4000000
+CONFIG_SPL_SYS_MALLOC_F_LEN=0x4000
+CONFIG_NR_DRAM_BANKS=1
+CONFIG_DEBUG_UART_BASE=0xFF130000
+CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SMBIOS_PRODUCT_NAME="rock-pi-e_rk3328"
+CONFIG_DEBUG_UART=y
+CONFIG_TPL_SYS_MALLOC_F_LEN=0x800
+# CONFIG_ANDROID_BOOT_IMAGE is not set
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+CONFIG_SPL_LOAD_FIT=y
+CONFIG_DEFAULT_FDT_FILE="rockchip/rk3328-rock-pi-e.dtb"
+CONFIG_MISC_INIT_R=y
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
+CONFIG_TPL_SYS_MALLOC_SIMPLE=y
+CONFIG_SPL_STACK_R=y
+CONFIG_SPL_I2C_SUPPORT=y
+CONFIG_SPL_POWER_SUPPORT=y
+CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
+CONFIG_SPL_ATF=y
+CONFIG_SPL_ATF_NO_PLATFORM_PARAM=y
+CONFIG_TPL_DRIVERS_MISC_SUPPORT=y
+CONFIG_CMD_BOOTZ=y
+CONFIG_CMD_GPT=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_USB=y
+CONFIG_CMD_TIME=y
+CONFIG_SPL_OF_CONTROL=y
+CONFIG_TPL_OF_CONTROL=y
+CONFIG_DEFAULT_DEVICE_TREE="rk3328-rock-pi-e"
+CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
+CONFIG_TPL_OF_PLATDATA=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_SYS_RELOC_GD_ENV_ADDR=y
+CONFIG_NET_RANDOM_ETHADDR=y
+CONFIG_TPL_DM=y
+CONFIG_REGMAP=y
+CONFIG_SPL_REGMAP=y
+CONFIG_TPL_REGMAP=y
+CONFIG_SYSCON=y
+CONFIG_SPL_SYSCON=y
+CONFIG_TPL_SYSCON=y
+CONFIG_CLK=y
+CONFIG_SPL_CLK=y
+CONFIG_FASTBOOT_BUF_ADDR=0x800800
+CONFIG_FASTBOOT_CMD_OEM_FORMAT=y
+CONFIG_ROCKCHIP_GPIO=y
+CONFIG_SYS_I2C_ROCKCHIP=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_SF_DEFAULT_SPEED=20000000
+CONFIG_DM_ETH=y
+CONFIG_ETH_DESIGNWARE=y
+CONFIG_GMAC_ROCKCHIP=y
+CONFIG_PHY=y
+CONFIG_PINCTRL=y
+CONFIG_SPL_PINCTRL=y
+CONFIG_DM_PMIC=y
+CONFIG_PMIC_RK8XX=y
+CONFIG_SPL_DM_REGULATOR=y
+CONFIG_REGULATOR_PWM=y
+CONFIG_SPL_DM_REGULATOR_FIXED=y
+CONFIG_DM_REGULATOR_FIXED=y
+CONFIG_REGULATOR_RK8XX=y
+CONFIG_PWM_ROCKCHIP=y
+CONFIG_RAM=y
+CONFIG_SPL_RAM=y
+CONFIG_TPL_RAM=y
+CONFIG_DM_RESET=y
+CONFIG_BAUDRATE=1500000
+CONFIG_DEBUG_UART_SHIFT=2
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_DEBUG_UART_SKIP_INIT=y
+CONFIG_SYSRESET=y
+# CONFIG_TPL_SYSRESET is not set
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_DWC3=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_GENERIC=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_GENERIC=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_DWC3=y
+# CONFIG_USB_DWC3_GADGET is not set
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DWC2_OTG=y
+CONFIG_SPL_TINY_MEMSET=y
+CONFIG_TPL_TINY_MEMSET=y
+CONFIG_ERRNO_STR=y
+CONFIG_SMBIOS_MANUFACTURER="radxa"

configs/rockpro64-rk3399_defconfig

@@ -1,12 +1,15 @@
 CONFIG_ARM=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_SYS_TEXT_BASE=0x00200000
+CONFIG_ENV_SIZE=0x8000
 CONFIG_ENV_OFFSET=0x3F8000
 CONFIG_ROCKCHIP_RK3399=y
 CONFIG_TARGET_ROCKPRO64_RK3399=y
 CONFIG_NR_DRAM_BANKS=1
 CONFIG_DEBUG_UART_BASE=0xFF1A0000
 CONFIG_DEBUG_UART_CLOCK=24000000
+CONFIG_SPL_SPI_FLASH_SUPPORT=y
+CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_DEBUG_UART=y
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rockpro64.dtb"
 CONFIG_MISC_INIT_R=y
@@ -14,17 +17,19 @@ CONFIG_DISPLAY_BOARDINFO_LATE=y
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
 CONFIG_SPL_STACK_R=y
 CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000
+CONFIG_SPL_SPI_LOAD=y
 CONFIG_TPL=y
 CONFIG_CMD_BOOTZ=y
 CONFIG_CMD_GPT=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_PCI=y
 # CONFIG_CMD_SETEXPR is not set
 CONFIG_CMD_TIME=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_DEFAULT_DEVICE_TREE="rk3399-rockpro64"
 CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
-CONFIG_ENV_IS_IN_MMC=y
+CONFIG_ENV_IS_IN_SPI_FLASH=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_ROCKCHIP_GPIO=y
 CONFIG_SYS_I2C_ROCKCHIP=y
@@ -39,10 +44,13 @@ CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_DM_ETH=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
+CONFIG_NVME=y
+CONFIG_PCI=y
 CONFIG_PMIC_RK8XX=y
 CONFIG_REGULATOR_PWM=y
 CONFIG_REGULATOR_RK8XX=y
 CONFIG_PWM_ROCKCHIP=y
+CONFIG_DM_RESET=y
 CONFIG_RAM_RK3399_LPDDR4=y
 CONFIG_BAUDRATE=1500000
 CONFIG_DEBUG_UART_SHIFT=2

doc/board/rockchip/rockchip.rst

@@ -48,6 +48,7 @@ List of mainline supported rockchip boards:
      - Rockchip Evb-RK3328 (evb-rk3328)
      - Pine64 Rock64 (rock64-rk3328)
      - Firefly-RK3328 (roc-cc-rk3328)
+     - Radxa Rockpi E (rock-pi-e-rk3328)
 * rk3368
      - GeekBox (geekbox)
      - PX5 EVB (evb-px5)
@@ -162,6 +163,30 @@ Program the flash::
 Note: for rockchip 32-bit platforms the U-Boot proper image
 is u-boot-dtb.img
 
+SPI
+^^^
+
+Generating idbloader for SPI boot would require to input a multi image
+image format to mkimage tool instead of concerting (like for MMC boot).
+
+SPL-alone SPI boot image::
+
+        ./tools/mkimage -n rk3399 -T rkspi -d spl/u-boot-spl.bin idbloader.img
+
+TPL+SPL SPI boot image::
+
+        ./tools/mkimage -n rk3399 -T rkspi -d tpl/u-boot-tpl.bin:spl/u-boot-spl.bin idbloader.img
+
+Copy SPI boot images into SD card and boot from SD::
+
+        sf probe
+        load mmc 1:1 $kernel_addr_r idbloader.img
+        sf erase 0 +$filesize
+        sf write $kernel_addr_r 0 ${filesize}
+        load mmc 1:1 ${kernel_addr_r} u-boot.itb
+        sf erase 0x60000 +$filesize
+        sf write $kernel_addr_r 0x60000 ${filesize}
+
 TODO
 ----
 
@@ -171,4 +196,4 @@ TODO
 - Add missing SoC's with it boards list
 
 .. Jagan Teki <jagan@amarulasolutions.com>
-.. Sunday 24 May 2020 10:08:41 PM IST
+.. Tuesday 02 June 2020 12:18:57 AM IST

include/configs/roc-pc-rk3399.h

@@ -13,10 +13,6 @@
 
 #include <configs/rk3399_common.h>
 
-#if defined(CONFIG_ENV_IS_IN_MMC)
-# define CONFIG_SYS_MMC_ENV_DEV		0
-#endif
-
 #define SDRAM_BANK_SIZE			(2UL << 30)
 
 #endif

include/configs/rockpro64_rk3399.h

@@ -13,8 +13,6 @@
 
 #include <configs/rk3399_common.h>
 
-#define CONFIG_SYS_MMC_ENV_DEV 0
-
 #define SDRAM_BANK_SIZE			(2UL << 30)
 
 #define CONFIG_USB_OHCI_NEW