mirror of
https://github.com/smaeul/u-boot.git
synced 2025-10-13 20:36:02 +01:00
Merge branch 'patch/a33-tablet-dts' into allwinner
This commit is contained in:
commit
42622d5521
@ -641,6 +641,7 @@ dtb-$(CONFIG_MACH_SUN8I_A33) += \
|
||||
sun8i-a33-et-q8-v1.6.dtb \
|
||||
sun8i-a33-ga10h-v1.1.dtb \
|
||||
sun8i-a33-inet-d978-rev2.dtb \
|
||||
sun8i-a33-inet-u70b-rev1.dtb \
|
||||
sun8i-a33-ippo-q8h-v1.2.dtb \
|
||||
sun8i-a33-olinuxino.dtb \
|
||||
sun8i-a33-q8-tablet.dtb \
|
||||
|
183
arch/arm/dts/sun8i-a33-inet-u70b-rev1.dts
Normal file
183
arch/arm/dts/sun8i-a33-inet-u70b-rev1.dts
Normal file
@ -0,0 +1,183 @@
|
||||
// SPDX-License-Identifier: (GPL-2.0+ or MIT)
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "sun8i-a33.dtsi"
|
||||
#include "sun8i-reference-design-tablet.dtsi"
|
||||
|
||||
/ {
|
||||
model = "iNet U70B REV01";
|
||||
compatible = "inet-tek,inet-u70b-rev01", "allwinner,sun8i-a33";
|
||||
|
||||
aliases {
|
||||
ethernet0 = &rtl8723cs;
|
||||
serial0 = &uart0;
|
||||
};
|
||||
|
||||
panel: panel {
|
||||
compatible = "panel-dpi";
|
||||
backlight = <&backlight>;
|
||||
enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */
|
||||
power-supply = <®_dc1sw>;
|
||||
|
||||
panel-timing {
|
||||
clock-frequency = <51000000>;
|
||||
hactive = <1024>;
|
||||
vactive = <600>;
|
||||
hfront-porch = <162>;
|
||||
hback-porch = <158>;
|
||||
hsync-len = <20>;
|
||||
vback-porch = <25>;
|
||||
vfront-porch = <10>;
|
||||
vsync-len = <3>;
|
||||
hsync-active = <1>;
|
||||
vsync-active = <1>;
|
||||
};
|
||||
|
||||
port {
|
||||
panel_in_tcon0: endpoint {
|
||||
remote-endpoint = <&tcon0_out_panel>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
speaker_amp: audio-amplifier {
|
||||
compatible = "simple-audio-amplifier";
|
||||
enable-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */
|
||||
sound-name-prefix = "Speaker Amp";
|
||||
};
|
||||
|
||||
wifi_pwrseq: wifi-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */
|
||||
post-power-on-delay-ms = <200>;
|
||||
};
|
||||
};
|
||||
|
||||
&codec {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dai {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&de {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
clock-frequency = <400000>;
|
||||
|
||||
accelerometer@18 {
|
||||
compatible = "bosch,bma250";
|
||||
reg = <0x18>;
|
||||
interrupt-parent = <&pio>;
|
||||
interrupts = <7 10 IRQ_TYPE_EDGE_RISING>; /* PH10 / EINT10 */
|
||||
};
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
pinctrl-0 = <&mmc1_pg_pins>;
|
||||
pinctrl-names = "default";
|
||||
bus-width = <4>;
|
||||
non-removable;
|
||||
vmmc-supply = <®_dldo1>;
|
||||
vqmmc-supply = <®_dldo2>;
|
||||
status = "okay";
|
||||
|
||||
rtl8723cs: wifi@1 {
|
||||
reg = <1>;
|
||||
interrupt-parent = <&r_pio>;
|
||||
interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */
|
||||
};
|
||||
};
|
||||
|
||||
&nfc {
|
||||
status = "okay";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
allwinner,rb = <0>;
|
||||
nand-ecc-maximize;
|
||||
};
|
||||
};
|
||||
|
||||
&r_uart {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
®_dldo2 {
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-name = "vcc-wifi-io";
|
||||
};
|
||||
|
||||
&simplefb_lcd {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sound {
|
||||
simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>;
|
||||
simple-audio-card,widgets = "Headphone", "Headphone Jack",
|
||||
"Microphone", "Internal Microphone",
|
||||
"Speaker", "Internal Speaker";
|
||||
simple-audio-card,routing = "Headphone Jack", "HP",
|
||||
"Internal Speaker", "Speaker Amp OUTL",
|
||||
"Internal Speaker", "Speaker Amp OUTR",
|
||||
"Speaker Amp INL", "HP", /* PHONEOUT ??? */
|
||||
"Speaker Amp INR", "HP", /* PHONEOUT ??? */
|
||||
"Left DAC", "DACL",
|
||||
"Right DAC", "DACR",
|
||||
"ADCL", "Left ADC",
|
||||
"ADCR", "Right ADC",
|
||||
"MIC1", "Internal Microphone",
|
||||
"MIC2", "Headset Microphone",
|
||||
"Headset Microphone", "HBIAS",
|
||||
"Internal Microphone", "MBIAS";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcon0 {
|
||||
pinctrl-0 = <&lcd_rgb666_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tcon0_out {
|
||||
tcon0_out_panel: endpoint {
|
||||
remote-endpoint = <&panel_in_tcon0>;
|
||||
};
|
||||
};
|
||||
|
||||
&touchscreen {
|
||||
reg = <0x40>;
|
||||
compatible = "silead,gsl1680";
|
||||
avdd-supply = <®_ldo_io1>;
|
||||
touchscreen-size-x = <1024>;
|
||||
touchscreen-size-y = <600>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-0 = <&uart0_pf_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pg_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "realtek,rtl8723cs-bt";
|
||||
device-wake-gpios = <&r_pio 0 10 GPIO_ACTIVE_LOW>; /* PL10 */
|
||||
enable-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */
|
||||
host-wake-gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */
|
||||
};
|
||||
};
|
28
configs/iNet_U70B_rev1_defconfig
Normal file
28
configs/iNet_U70B_rev1_defconfig
Normal file
@ -0,0 +1,28 @@
|
||||
CONFIG_ARM=y
|
||||
CONFIG_ARCH_SUNXI=y
|
||||
CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-inet-u70b-rev1"
|
||||
CONFIG_SPL=y
|
||||
CONFIG_MACH_SUN8I_A33=y
|
||||
CONFIG_DRAM_CLK=480
|
||||
CONFIG_DRAM_ZQ=31675
|
||||
CONFIG_DRAM_ODT_EN=y
|
||||
CONFIG_UART0_PORT_F=y
|
||||
CONFIG_MMC0_CD_PIN="PB4"
|
||||
CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:51000,le:158,ri:162,up:25,lo:10,hs:20,vs:3,sync:3,vmode:0"
|
||||
CONFIG_VIDEO_LCD_DCLK_PHASE=0
|
||||
CONFIG_VIDEO_LCD_POWER="PH7"
|
||||
CONFIG_VIDEO_LCD_BL_EN="PH6"
|
||||
CONFIG_VIDEO_LCD_BL_PWM="PH0"
|
||||
# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
|
||||
CONFIG_PREBOOT="fastboot usb 0"
|
||||
CONFIG_CMD_PMIC=y
|
||||
CONFIG_CMD_REGULATOR=y
|
||||
CONFIG_AXP_GPIO=y
|
||||
CONFIG_REGULATOR_AXP=y
|
||||
CONFIG_REGULATOR_AXP_USB_POWER=y
|
||||
CONFIG_AXP_DLDO1_VOLT=3300
|
||||
CONFIG_DM_PWM=y
|
||||
CONFIG_PWM_SUNXI=y
|
||||
CONFIG_REMOTEPROC_SUN6I_AR100=y
|
||||
CONFIG_USB_MUSB_GADGET=y
|
||||
CONFIG_WATCHDOG_AUTOSTART=y
|
Loading…
x
Reference in New Issue
Block a user