armv8: psci: add ARMV8_PSCI_RELOCATE Kconfig option

There is an user-selectable SYS_HAS_ARMV8_SECURE_BASE, which has the
same meaning but is just for the ls1043ardb board. As no in-tree config
uses this, drop it and replace it with something more sophiticated:
ARMV8_PSCI_RELOCATE. This option will then enable the ARMV8_SECURE_BASE
option which is used as the base to relocate the PSCI code (or any code
in the secure region, but that is only PSCI). A SoC (or board) can now
opt-in into having such a secure region by enabling
SYS_HAS_ARMV8_SECURE_BASE. Enable it for the LS1043A SoC, where it was
possible to relocate the PSCI code before as well as on the LS1028A SoC
where there will be PSCI support soon.

Additionally, make ARMV8_PSCI and SEC_FIRMWARE_ARMV8_PSCI exclusive.

Signed-off-by: Michael Walle <michael@walle.cc>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>

arch/arm/cpu/armv8/Kconfig

@@ -90,6 +90,7 @@ config SPL_RECOVER_DATA_SECTION
 config SEC_FIRMWARE_ARMV8_PSCI
 	bool "PSCI implementation in secure monitor firmware"
 	depends on ARMV8_SEC_FIRMWARE_SUPPORT || SPL_ARMV8_SEC_FIRMWARE_SUPPORT
+	depends on ARMV8_PSCI=n
 	help
 	  This config enables the ARMv8 PSCI implementation in secure monitor
 	  firmware. This is a private PSCI implementation and different from
@@ -131,6 +132,9 @@ config PSCI_RESET
 
 	  Select Y here to make use of PSCI calls for system reset
 
+config SYS_HAS_ARMV8_SECURE_BASE
+	bool
+
 config ARMV8_PSCI
 	bool "Enable PSCI support" if EXPERT
 	help
@@ -158,23 +162,27 @@ config ARMV8_PSCI_CPUS_PER_CLUSTER
 	  A value 0 or no definition of it works for single cluster system.
 	  System with multi-cluster should difine their own exact value.
 
+config ARMV8_PSCI_RELOCATE
+	bool "Relocate PSCI code"
+	depends on ARMV8_PSCI
+	depends on SYS_HAS_ARMV8_SECURE_BASE
+	help
+	  Relocate PSCI code, for example to a secure memory on the SoC. If not
+	  set, the PSCI sections are placed together with the u-boot and the
+	  regions will be marked as reserved before linux is started.
+
+config ARMV8_SECURE_BASE
+	hex "Secure address for PSCI image"
+	depends on ARMV8_PSCI_RELOCATE
+	default 0x18000000 if ARCH_LS1028A
+	help
+	  Address for placing the PSCI text, data and stack sections.
+
+
 config ARMV8_EA_EL3_FIRST
 	bool "External aborts and SError interrupt exception are taken in EL3"
 	help
 	  Exception handling at all exception levels for External Abort and
 	  SError interrupt exception are taken in EL3.
 
-if SYS_HAS_ARMV8_SECURE_BASE
-
-config ARMV8_SECURE_BASE
-	hex "Secure address for PSCI image"
-	depends on ARMV8_PSCI
-	help
-	  Address for placing the PSCI text, data and stack sections.
-	  If not defined, the PSCI sections are placed together with the u-boot
-	  but platform can choose to place PSCI code image separately in other
-	  places such as some secure RAM built-in SOC etc.
-
-endif
-
 endif

arch/arm/cpu/armv8/fsl-layerscape/Kconfig

@@ -55,6 +55,7 @@ config ARCH_LS1028A
 	select SYS_FSL_ERRATUM_A011334
 	select SYS_FSL_ESDHC_UNRELIABLE_PULSE_DETECTION_WORKAROUND
 	select RESV_RAM if GIC_V3_ITS
+	select SYS_HAS_ARMV8_SECURE_BASE
 	imply PANIC_HANG
 
 config ARCH_LS1043A
@@ -90,6 +91,7 @@ config ARCH_LS1043A
 	select SYS_I2C_MXC_I2C2 if !DM_I2C
 	select SYS_I2C_MXC_I2C3 if !DM_I2C
 	select SYS_I2C_MXC_I2C4 if !DM_I2C
+	select SYS_HAS_ARMV8_SECURE_BASE
 	imply CMD_PCI
 	imply ID_EEPROM
 

board/freescale/ls1043ardb/Kconfig

@@ -13,14 +13,6 @@ config SYS_SOC
 config SYS_CONFIG_NAME
 	default "ls1043ardb"
 
-config SYS_HAS_ARMV8_SECURE_BASE
-	bool "Enable secure address for PSCI image"
-	depends on ARMV8_PSCI
-	help
-	  PSCI image can be re-located to secure RAM.
-	  If enabled, please also define the value for ARMV8_SECURE_BASE,
-	  for LS1043ARDB, it could be some address in OCRAM.
-
 if FSL_LS_PPA
 config SYS_LS_PPA_FW_ADDR
 	hex "PPA Firmware Addr"