Merge branch 'master' of git://git.denx.de/u-boot-spi

This is the PR for SPI-NAND changes along with few spi changes.

[trini: Re-sync changes for ls1012afrwy_qspi*_defconfig]
Signed-off-by: Tom Rini <trini@konsulko.com>

MAINTAINERS

@@ -299,7 +299,7 @@ F:	drivers/i2c/i2c-cdns.c
 F:	drivers/i2c/muxes/pca954x.c
 F:	drivers/i2c/zynq_i2c.c
 F:	drivers/mmc/zynq_sdhci.c
-F:	drivers/mtd/nand/zynq_nand.c
+F:	drivers/mtd/nand/raw/zynq_nand.c
 F:	drivers/net/phy/xilinx_phy.c
 F:	drivers/net/zynq_gem.c
 F:	drivers/serial/serial_zynq.c
@@ -323,7 +323,7 @@ F:	drivers/i2c/i2c-cdns.c
 F:	drivers/i2c/muxes/pca954x.c
 F:	drivers/i2c/zynq_i2c.c
 F:	drivers/mmc/zynq_sdhci.c
-F:	drivers/mtd/nand/zynq_nand.c
+F:	drivers/mtd/nand/raw/zynq_nand.c
 F:	drivers/net/phy/xilinx_phy.c
 F:	drivers/net/zynq_gem.c
 F:	drivers/serial/serial_zynq.c
@@ -478,7 +478,7 @@ NAND FLASH
 #M:	Scott Wood <oss@buserror.net>
 S:	Orphaned (Since 2018-07)
 T:	git git://git.denx.de/u-boot-nand-flash.git
-F:	drivers/mtd/nand/
+F:	drivers/mtd/nand/raw/
 
 NDS32
 M:	Macpaul Lin <macpaul@andestech.com>

Makefile

@@ -689,7 +689,7 @@ libs-y += drivers/dma/
 libs-y += drivers/gpio/
 libs-y += drivers/i2c/
 libs-y += drivers/mtd/
-libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/
+libs-$(CONFIG_CMD_NAND) += drivers/mtd/nand/raw/
 libs-y += drivers/mtd/onenand/
 libs-$(CONFIG_CMD_UBI) += drivers/mtd/ubi/
 libs-y += drivers/mtd/spi/

README

@@ -3237,8 +3237,8 @@ Low Level (hardware related) configuration options:
 		a 16 bit bus.
 		Not all NAND drivers use this symbol.
 		Example of drivers that use it:
-		- drivers/mtd/nand/ndfc.c
-		- drivers/mtd/nand/mxc_nand.c
+		- drivers/mtd/nand/raw/ndfc.c
+		- drivers/mtd/nand/raw/mxc_nand.c
 
 - CONFIG_SYS_NDFC_EBC0_CFG
 		Sets the EBC0_CFG register for the NDFC. If not defined
@@ -3355,7 +3355,7 @@ Low Level (hardware related) configuration options:
 - CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
 		Option to disable subpage write in NAND driver
 		driver that uses this:
-		drivers/mtd/nand/davinci_nand.c
+		drivers/mtd/nand/raw/davinci_nand.c
 
 Freescale QE/FMAN Firmware Support:
 -----------------------------------

arch/arm/mach-uniphier/board_late_init.c

@@ -12,7 +12,7 @@
 #include <stdio.h>
 #include <linux/io.h>
 #include <linux/printk.h>
-#include <../drivers/mtd/nand/denali.h>
+#include <../drivers/mtd/nand/raw/denali.h>
 
 #include "init.h"
 

cmd/Kconfig

@@ -866,6 +866,12 @@ config CMD_MMC_SWRITE
 	  Enable support for the "mmc swrite" command to write Android sparse
 	  images to eMMC.
 
+config CMD_MTD
+	bool "mtd"
+	select MTD_PARTITIONS
+	help
+	  MTD commands support.
+
 config CMD_NAND
 	bool "nand"
 	default y if NAND_SUNXI
@@ -1714,18 +1720,22 @@ config CMD_MTDPARTS
 	bool "MTD partition support"
 	select MTD_DEVICE if (CMD_NAND || NAND)
 	help
-	  MTD partition support
+	  MTD partitioning tool support.
+	  It is strongly encouraged to avoid using this command
+	  anymore along with 'sf', 'nand', 'onenand'. One can still
+	  declare the partitions in the mtdparts environment variable
+	  but better use the MTD stack and the 'mtd' command instead.
 
 config MTDIDS_DEFAULT
 	string "Default MTD IDs"
-	depends on CMD_MTDPARTS || CMD_NAND || CMD_FLASH
+	depends on CMD_MTD || CMD_MTDPARTS || CMD_NAND || CMD_FLASH
 	help
 	  Defines a default MTD IDs list for use with MTD partitions in the
 	  Linux MTD command line partitions format.
 
 config MTDPARTS_DEFAULT
 	string "Default MTD partition scheme"
-	depends on CMD_MTDPARTS || CMD_NAND || CMD_FLASH
+	depends on CMD_MTD || CMD_MTDPARTS || CMD_NAND || CMD_FLASH
 	help
 	  Defines a default MTD partitioning scheme in the Linux MTD command
 	  line partitions format
@@ -1855,6 +1865,8 @@ config CMD_UBI
 	  capabilities. Please, consult the MTD web site for more details
 	  (www.linux-mtd.infradead.org). Activate this option if you want
 	  to use U-Boot UBI commands.
+	  It is also strongly encouraged to also enable CONFIG_MTD to get full
+	  partition support.
 
 config CMD_UBIFS
 	tristate "Enable UBIFS - Unsorted block images filesystem commands"

cmd/Makefile

@@ -93,6 +93,7 @@ obj-$(CONFIG_CMD_MISC) += misc.o
 obj-$(CONFIG_CMD_MMC) += mmc.o
 obj-$(CONFIG_CMD_MMC_SPI) += mmc_spi.o
 obj-$(CONFIG_MP) += mp.o
+obj-$(CONFIG_CMD_MTD) += mtd.o
 obj-$(CONFIG_CMD_MTDPARTS) += mtdparts.o
 obj-$(CONFIG_CMD_NAND) += nand.o
 obj-$(CONFIG_CMD_NET) += net.o

cmd/mtd.c

@@ -0,0 +1,473 @@
+// SPDX-License-Identifier:  GPL-2.0+
+/*
+ * mtd.c
+ *
+ * Generic command to handle basic operations on any memory device.
+ *
+ * Copyright: Bootlin, 2018
+ * Author: Miquèl Raynal <miquel.raynal@bootlin.com>
+ */
+
+#include <command.h>
+#include <common.h>
+#include <console.h>
+#include <malloc.h>
+#include <mapmem.h>
+#include <mtd.h>
+
+static uint mtd_len_to_pages(struct mtd_info *mtd, u64 len)
+{
+	do_div(len, mtd->writesize);
+
+	return len;
+}
+
+static bool mtd_is_aligned_with_min_io_size(struct mtd_info *mtd, u64 size)
+{
+	return !do_div(size, mtd->writesize);
+}
+
+static bool mtd_is_aligned_with_block_size(struct mtd_info *mtd, u64 size)
+{
+	return !do_div(size, mtd->erasesize);
+}
+
+static void mtd_dump_buf(const u8 *buf, uint len, uint offset)
+{
+	int i, j;
+
+	for (i = 0; i < len; ) {
+		printf("0x%08x:\t", offset + i);
+		for (j = 0; j < 8; j++)
+			printf("%02x ", buf[i + j]);
+		printf(" ");
+		i += 8;
+		for (j = 0; j < 8; j++)
+			printf("%02x ", buf[i + j]);
+		printf("\n");
+		i += 8;
+	}
+}
+
+static void mtd_dump_device_buf(struct mtd_info *mtd, u64 start_off,
+				const u8 *buf, u64 len, bool woob)
+{
+	bool has_pages = mtd->type == MTD_NANDFLASH ||
+		mtd->type == MTD_MLCNANDFLASH;
+	int npages = mtd_len_to_pages(mtd, len);
+	uint page;
+
+	if (has_pages) {
+		for (page = 0; page < npages; page++) {
+			u64 data_off = page * mtd->writesize;
+
+			printf("\nDump %d data bytes from 0x%08llx:\n",
+			       mtd->writesize, start_off + data_off);
+			mtd_dump_buf(&buf[data_off],
+				     mtd->writesize, start_off + data_off);
+
+			if (woob) {
+				u64 oob_off = page * mtd->oobsize;
+
+				printf("Dump %d OOB bytes from page at 0x%08llx:\n",
+				       mtd->oobsize, start_off + data_off);
+				mtd_dump_buf(&buf[len + oob_off],
+					     mtd->oobsize, 0);
+			}
+		}
+	} else {
+		printf("\nDump %lld data bytes from 0x%llx:\n",
+		       len, start_off);
+		mtd_dump_buf(buf, len, start_off);
+	}
+}
+
+static void mtd_show_parts(struct mtd_info *mtd, int level)
+{
+	struct mtd_info *part;
+	int i;
+
+	list_for_each_entry(part, &mtd->partitions, node) {
+		for (i = 0; i < level; i++)
+			printf("\t");
+		printf("  - 0x%012llx-0x%012llx : \"%s\"\n",
+		       part->offset, part->offset + part->size, part->name);
+
+		mtd_show_parts(part, level + 1);
+	}
+}
+
+static void mtd_show_device(struct mtd_info *mtd)
+{
+	/* Device */
+	printf("* %s\n", mtd->name);
+#if defined(CONFIG_DM)
+	if (mtd->dev) {
+		printf("  - device: %s\n", mtd->dev->name);
+		printf("  - parent: %s\n", mtd->dev->parent->name);
+		printf("  - driver: %s\n", mtd->dev->driver->name);
+	}
+#endif
+
+	/* MTD device information */
+	printf("  - type: ");
+	switch (mtd->type) {
+	case MTD_RAM:
+		printf("RAM\n");
+		break;
+	case MTD_ROM:
+		printf("ROM\n");
+		break;
+	case MTD_NORFLASH:
+		printf("NOR flash\n");
+		break;
+	case MTD_NANDFLASH:
+		printf("NAND flash\n");
+		break;
+	case MTD_DATAFLASH:
+		printf("Data flash\n");
+		break;
+	case MTD_UBIVOLUME:
+		printf("UBI volume\n");
+		break;
+	case MTD_MLCNANDFLASH:
+		printf("MLC NAND flash\n");
+		break;
+	case MTD_ABSENT:
+	default:
+		printf("Unknown\n");
+		break;
+	}
+
+	printf("  - block size: 0x%x bytes\n", mtd->erasesize);
+	printf("  - min I/O: 0x%x bytes\n", mtd->writesize);
+
+	if (mtd->oobsize) {
+		printf("  - OOB size: %u bytes\n", mtd->oobsize);
+		printf("  - OOB available: %u bytes\n", mtd->oobavail);
+	}
+
+	if (mtd->ecc_strength) {
+		printf("  - ECC strength: %u bits\n", mtd->ecc_strength);
+		printf("  - ECC step size: %u bytes\n", mtd->ecc_step_size);
+		printf("  - bitflip threshold: %u bits\n",
+		       mtd->bitflip_threshold);
+	}
+
+	printf("  - 0x%012llx-0x%012llx : \"%s\"\n",
+	       mtd->offset, mtd->offset + mtd->size, mtd->name);
+
+	/* MTD partitions, if any */
+	mtd_show_parts(mtd, 1);
+}
+
+/* Logic taken from fs/ubifs/recovery.c:is_empty() */
+static bool mtd_oob_write_is_empty(struct mtd_oob_ops *op)
+{
+	int i;
+
+	for (i = 0; i < op->len; i++)
+		if (op->datbuf[i] != 0xff)
+			return false;
+
+	for (i = 0; i < op->ooblen; i++)
+		if (op->oobbuf[i] != 0xff)
+			return false;
+
+	return true;
+}
+
+static int do_mtd_list(void)
+{
+	struct mtd_info *mtd;
+	int dev_nb = 0;
+
+	/* Ensure all devices (and their partitions) are probed */
+	mtd_probe_devices();
+
+	printf("List of MTD devices:\n");
+	mtd_for_each_device(mtd) {
+		if (!mtd_is_partition(mtd))
+			mtd_show_device(mtd);
+
+		dev_nb++;
+	}
+
+	if (!dev_nb) {
+		printf("No MTD device found\n");
+		return CMD_RET_FAILURE;
+	}
+
+	return CMD_RET_SUCCESS;
+}
+
+static int mtd_special_write_oob(struct mtd_info *mtd, u64 off,
+				 struct mtd_oob_ops *io_op,
+				 bool write_empty_pages, bool woob)
+{
+	int ret = 0;
+
+	/*
+	 * By default, do not write an empty page.
+	 * Skip it by simulating a successful write.
+	 */
+	if (!write_empty_pages && mtd_oob_write_is_empty(io_op)) {
+		io_op->retlen = mtd->writesize;
+		io_op->oobretlen = woob ? mtd->oobsize : 0;
+	} else {
+		ret = mtd_write_oob(mtd, off, io_op);
+	}
+
+	return ret;
+}
+
+static int do_mtd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+	struct mtd_info *mtd;
+	const char *cmd;
+	char *mtd_name;
+
+	/* All MTD commands need at least two arguments */
+	if (argc < 2)
+		return CMD_RET_USAGE;
+
+	/* Parse the command name and its optional suffixes */
+	cmd = argv[1];
+
+	/* List the MTD devices if that is what the user wants */
+	if (strcmp(cmd, "list") == 0)
+		return do_mtd_list();
+
+	/*
+	 * The remaining commands require also at least a device ID.
+	 * Check the selected device is valid. Ensure it is probed.
+	 */
+	if (argc < 3)
+		return CMD_RET_USAGE;
+
+	mtd_name = argv[2];
+	mtd_probe_devices();
+	mtd = get_mtd_device_nm(mtd_name);
+	if (IS_ERR_OR_NULL(mtd)) {
+		printf("MTD device %s not found, ret %ld\n",
+		       mtd_name, PTR_ERR(mtd));
+		return CMD_RET_FAILURE;
+	}
+	put_mtd_device(mtd);
+
+	argc -= 3;
+	argv += 3;
+
+	/* Do the parsing */
+	if (!strncmp(cmd, "read", 4) || !strncmp(cmd, "dump", 4) ||
+	    !strncmp(cmd, "write", 5)) {
+		bool has_pages = mtd->type == MTD_NANDFLASH ||
+				 mtd->type == MTD_MLCNANDFLASH;
+		bool dump, read, raw, woob, write_empty_pages;
+		struct mtd_oob_ops io_op = {};
+		uint user_addr = 0, npages;
+		u64 start_off, off, len, remaining, default_len;
+		u32 oob_len;
+		u8 *buf;
+		int ret;
+
+		dump = !strncmp(cmd, "dump", 4);
+		read = dump || !strncmp(cmd, "read", 4);
+		raw = strstr(cmd, ".raw");
+		woob = strstr(cmd, ".oob");
+		write_empty_pages = !has_pages || strstr(cmd, ".dontskipff");
+
+		if (!dump) {
+			if (!argc)
+				return CMD_RET_USAGE;
+
+			user_addr = simple_strtoul(argv[0], NULL, 16);
+			argc--;
+			argv++;
+		}
+
+		start_off = argc > 0 ? simple_strtoul(argv[0], NULL, 16) : 0;
+		if (!mtd_is_aligned_with_min_io_size(mtd, start_off)) {
+			printf("Offset not aligned with a page (0x%x)\n",
+			       mtd->writesize);
+			return CMD_RET_FAILURE;
+		}
+
+		default_len = dump ? mtd->writesize : mtd->size;
+		len = argc > 1 ? simple_strtoul(argv[1], NULL, 16) :
+				 default_len;
+		if (!mtd_is_aligned_with_min_io_size(mtd, len)) {
+			len = round_up(len, mtd->writesize);
+			printf("Size not on a page boundary (0x%x), rounding to 0x%llx\n",
+			       mtd->writesize, len);
+		}
+
+		remaining = len;
+		npages = mtd_len_to_pages(mtd, len);
+		oob_len = woob ? npages * mtd->oobsize : 0;
+
+		if (dump)
+			buf = kmalloc(len + oob_len, GFP_KERNEL);
+		else
+			buf = map_sysmem(user_addr, 0);
+
+		if (!buf) {
+			printf("Could not map/allocate the user buffer\n");
+			return CMD_RET_FAILURE;
+		}
+
+		if (has_pages)
+			printf("%s %lld byte(s) (%d page(s)) at offset 0x%08llx%s%s%s\n",
+			       read ? "Reading" : "Writing", len, npages, start_off,
+			       raw ? " [raw]" : "", woob ? " [oob]" : "",
+			       !read && write_empty_pages ? " [dontskipff]" : "");
+		else
+			printf("%s %lld byte(s) at offset 0x%08llx\n",
+			       read ? "Reading" : "Writing", len, start_off);
+
+		io_op.mode = raw ? MTD_OPS_RAW : MTD_OPS_AUTO_OOB;
+		io_op.len = has_pages ? mtd->writesize : len;
+		io_op.ooblen = woob ? mtd->oobsize : 0;
+		io_op.datbuf = buf;
+		io_op.oobbuf = woob ? &buf[len] : NULL;
+
+		/* Search for the first good block after the given offset */
+		off = start_off;
+		while (mtd_block_isbad(mtd, off))
+			off += mtd->erasesize;
+
+		/* Loop over the pages to do the actual read/write */
+		while (remaining) {
+			/* Skip the block if it is bad */
+			if (mtd_is_aligned_with_block_size(mtd, off) &&
+			    mtd_block_isbad(mtd, off)) {
+				off += mtd->erasesize;
+				continue;
+			}
+
+			if (read)
+				ret = mtd_read_oob(mtd, off, &io_op);
+			else
+				ret = mtd_special_write_oob(mtd, off, &io_op,
+							    write_empty_pages,
+							    woob);
+
+			if (ret) {
+				printf("Failure while %s at offset 0x%llx\n",
+				       read ? "reading" : "writing", off);
+				return CMD_RET_FAILURE;
+			}
+
+			off += io_op.retlen;
+			remaining -= io_op.retlen;
+			io_op.datbuf += io_op.retlen;
+			io_op.oobbuf += io_op.oobretlen;
+		}
+
+		if (!ret && dump)
+			mtd_dump_device_buf(mtd, start_off, buf, len, woob);
+
+		if (dump)
+			kfree(buf);
+		else
+			unmap_sysmem(buf);
+
+		if (ret) {
+			printf("%s on %s failed with error %d\n",
+			       read ? "Read" : "Write", mtd->name, ret);
+			return CMD_RET_FAILURE;
+		}
+
+	} else if (!strcmp(cmd, "erase")) {
+		bool scrub = strstr(cmd, ".dontskipbad");
+		struct erase_info erase_op = {};
+		u64 off, len;
+		int ret;
+
+		off = argc > 0 ? simple_strtoul(argv[0], NULL, 16) : 0;
+		len = argc > 1 ? simple_strtoul(argv[1], NULL, 16) : mtd->size;
+
+		if (!mtd_is_aligned_with_block_size(mtd, off)) {
+			printf("Offset not aligned with a block (0x%x)\n",
+			       mtd->erasesize);
+			return CMD_RET_FAILURE;
+		}
+
+		if (!mtd_is_aligned_with_block_size(mtd, len)) {
+			printf("Size not a multiple of a block (0x%x)\n",
+			       mtd->erasesize);
+			return CMD_RET_FAILURE;
+		}
+
+		printf("Erasing 0x%08llx ... 0x%08llx (%d eraseblock(s))\n",
+		       off, off + len - 1, mtd_div_by_eb(len, mtd));
+
+		erase_op.mtd = mtd;
+		erase_op.addr = off;
+		erase_op.len = len;
+		erase_op.scrub = scrub;
+
+		while (erase_op.len) {
+			ret = mtd_erase(mtd, &erase_op);
+
+			/* Abort if its not a bad block error */
+			if (ret != -EIO)
+				break;
+
+			printf("Skipping bad block at 0x%08llx\n",
+			       erase_op.fail_addr);
+
+			/* Skip bad block and continue behind it */
+			erase_op.len -= erase_op.fail_addr - erase_op.addr;
+			erase_op.len -= mtd->erasesize;
+			erase_op.addr = erase_op.fail_addr + mtd->erasesize;
+		}
+
+		if (ret && ret != -EIO)
+			return CMD_RET_FAILURE;
+	} else if (!strcmp(cmd, "bad")) {
+		loff_t off;
+
+		if (!mtd_can_have_bb(mtd)) {
+			printf("Only NAND-based devices can have bad blocks\n");
+			return CMD_RET_SUCCESS;
+		}
+
+		printf("MTD device %s bad blocks list:\n", mtd->name);
+		for (off = 0; off < mtd->size; off += mtd->erasesize)
+			if (mtd_block_isbad(mtd, off))
+				printf("\t0x%08llx\n", off);
+	} else {
+		return CMD_RET_USAGE;
+	}
+
+	return CMD_RET_SUCCESS;
+}
+
+static char mtd_help_text[] =
+#ifdef CONFIG_SYS_LONGHELP
+	"- generic operations on memory technology devices\n\n"
+	"mtd list\n"
+	"mtd read[.raw][.oob]                  <name> <addr> [<off> [<size>]]\n"
+	"mtd dump[.raw][.oob]                  <name>        [<off> [<size>]]\n"
+	"mtd write[.raw][.oob][.dontskipff]    <name> <addr> [<off> [<size>]]\n"
+	"mtd erase[.dontskipbad]               <name>        [<off> [<size>]]\n"
+	"\n"
+	"Specific functions:\n"
+	"mtd bad                               <name>\n"
+	"\n"
+	"With:\n"
+	"\t<name>: NAND partition/chip name\n"
+	"\t<addr>: user address from/to which data will be retrieved/stored\n"
+	"\t<off>: offset in <name> in bytes (default: start of the part)\n"
+	"\t\t* must be block-aligned for erase\n"
+	"\t\t* must be page-aligned otherwise\n"
+	"\t<size>: length of the operation in bytes (default: the entire device)\n"
+	"\t\t* must be a multiple of a block for erase\n"
+	"\t\t* must be a multiple of a page otherwise (special case: default is a page with dump)\n"
+	"\n"
+	"The .dontskipff option forces writing empty pages, don't use it if unsure.\n"
+#endif
+	"";
+
+U_BOOT_CMD(mtd, 10, 1, do_mtd, "MTD utils", mtd_help_text);

cmd/mtdparts.c

@@ -37,14 +37,14 @@
  * mtdids=<idmap>[,<idmap>,...]
  *
  * <idmap>    := <dev-id>=<mtd-id>
- * <dev-id>   := 'nand'|'nor'|'onenand'<dev-num>
+ * <dev-id>   := 'nand'|'nor'|'onenand'|'spi-nand'<dev-num>
  * <dev-num>  := mtd device number, 0...
  * <mtd-id>   := unique device tag used by linux kernel to find mtd device (mtd->name)
  *
  *
  * 'mtdparts' - partition list
  *
- * mtdparts=mtdparts=<mtd-def>[;<mtd-def>...]
+ * mtdparts=[mtdparts=]<mtd-def>[;<mtd-def>...]
  *
  * <mtd-def>  := <mtd-id>:<part-def>[,<part-def>...]
  * <mtd-id>   := unique device tag used by linux kernel to find mtd device (mtd->name)
@@ -62,11 +62,11 @@
  *
  * 1 NOR Flash, with 1 single writable partition:
  * mtdids=nor0=edb7312-nor
- * mtdparts=mtdparts=edb7312-nor:-
+ * mtdparts=[mtdparts=]edb7312-nor:-
  *
  * 1 NOR Flash with 2 partitions, 1 NAND with one
  * mtdids=nor0=edb7312-nor,nand0=edb7312-nand
- * mtdparts=mtdparts=edb7312-nor:256k(ARMboot)ro,-(root);edb7312-nand:-(home)
+ * mtdparts=[mtdparts=]edb7312-nor:256k(ARMboot)ro,-(root);edb7312-nand:-(home)
  *
  */
 
@@ -177,13 +177,16 @@ static u64 memsize_parse (const char *const ptr, const char **retptr)
 		case 'G':
 		case 'g':
 			ret <<= 10;
+			/* Fallthrough */
 		case 'M':
 		case 'm':
 			ret <<= 10;
+			/* Fallthrough */
 		case 'K':
 		case 'k':
 			ret <<= 10;
 			(*retptr)++;
+			/* Fallthrough */
 		default:
 			break;
 	}
@@ -336,7 +339,7 @@ static int part_validate_eraseblock(struct mtdids *id, struct part_info *part)
 
 	if (!mtd->numeraseregions) {
 		/*
-		 * Only one eraseregion (NAND, OneNAND or uniform NOR),
+		 * Only one eraseregion (NAND, SPI-NAND, OneNAND or uniform NOR),
 		 * checking for alignment is easy here
 		 */
 		offset = part->offset;
@@ -1027,7 +1030,7 @@ static struct mtdids* id_find_by_mtd_id(const char *mtd_id, unsigned int mtd_id_
 }
 
 /**
- * Parse device id string <dev-id> := 'nand'|'nor'|'onenand'<dev-num>,
+ * Parse device id string <dev-id> := 'nand'|'nor'|'onenand'|'spi-nand'<dev-num>,
  * return device type and number.
  *
  * @param id string describing device id
@@ -1051,6 +1054,9 @@ int mtd_id_parse(const char *id, const char **ret_id, u8 *dev_type,
 	} else if (strncmp(p, "onenand", 7) == 0) {
 		*dev_type = MTD_DEV_TYPE_ONENAND;
 		p += 7;
+	} else if (strncmp(p, "spi-nand", 8) == 0) {
+		*dev_type = MTD_DEV_TYPE_SPINAND;
+		p += 8;
 	} else {
 		printf("incorrect device type in %s\n", id);
 		return 1;
@@ -1093,9 +1099,6 @@ static int generate_mtdparts(char *buf, u32 buflen)
 		return 0;
 	}
 
-	strcpy(p, "mtdparts=");
-	p += 9;
-
 	list_for_each(dentry, &devices) {
 		dev = list_entry(dentry, struct mtd_device, link);
 
@@ -1566,11 +1569,9 @@ static int parse_mtdparts(const char *const mtdparts)
 	if (!p)
 		p = mtdparts;
 
-	if (strncmp(p, "mtdparts=", 9) != 0) {
-		printf("mtdparts variable doesn't start with 'mtdparts='\n");
-		return err;
-	}
-	p += 9;
+	/* Skip the useless prefix, if any */
+	if (strncmp(p, "mtdparts=", 9) == 0)
+		p += 9;
 
 	while (*p != '\0') {
 		err = 1;
@@ -1633,7 +1634,7 @@ static int parse_mtdids(const char *const ids)
 	while(p && (*p != '\0')) {
 
 		ret = 1;
-		/* parse 'nor'|'nand'|'onenand'<dev-num> */
+		/* parse 'nor'|'nand'|'onenand'|'spi-nand'<dev-num> */
 		if (mtd_id_parse(p, &p, &type, &num) != 0)
 			break;
 
@@ -2109,7 +2110,7 @@ static char mtdparts_help_text[] =
 	"'mtdids' - linux kernel mtd device id <-> u-boot device id mapping\n\n"
 	"mtdids=<idmap>[,<idmap>,...]\n\n"
 	"<idmap>    := <dev-id>=<mtd-id>\n"
-	"<dev-id>   := 'nand'|'nor'|'onenand'<dev-num>\n"
+	"<dev-id>   := 'nand'|'nor'|'onenand'|'spi-nand'<dev-num>\n"
 	"<dev-num>  := mtd device number, 0...\n"
 	"<mtd-id>   := unique device tag used by linux kernel to find mtd device (mtd->name)\n\n"
 	"'mtdparts' - partition list\n\n"

cmd/ubi.c

@@ -15,6 +15,7 @@
 #include <command.h>
 #include <exports.h>
 #include <memalign.h>
+#include <mtd.h>
 #include <nand.h>
 #include <onenand_uboot.h>
 #include <linux/mtd/mtd.h>
@@ -27,24 +28,8 @@
 #undef ubi_msg
 #define ubi_msg(fmt, ...) printf("UBI: " fmt "\n", ##__VA_ARGS__)
 
-#define DEV_TYPE_NONE		0
-#define DEV_TYPE_NAND		1
-#define DEV_TYPE_ONENAND	2
-#define DEV_TYPE_NOR		3
-
 /* Private own data */
 static struct ubi_device *ubi;
-static char buffer[80];
-static int ubi_initialized;
-
-struct selected_dev {
-	char part_name[80];
-	int selected;
-	int nr;
-	struct mtd_info *mtd_info;
-};
-
-static struct selected_dev ubi_dev;
 
 #ifdef CONFIG_CMD_UBIFS
 #include <ubifs_uboot.h>
@@ -408,43 +393,24 @@ int ubi_volume_read(char *volume, char *buf, size_t size)
 	return err;
 }
 
-static int ubi_dev_scan(struct mtd_info *info, char *ubidev,
-		const char *vid_header_offset)
+static int ubi_dev_scan(struct mtd_info *info, const char *vid_header_offset)
 {
-	struct mtd_device *dev;
-	struct part_info *part;
-	struct mtd_partition mtd_part;
 	char ubi_mtd_param_buffer[80];
-	u8 pnum;
 	int err;
 
-	if (find_dev_and_part(ubidev, &dev, &pnum, &part) != 0)
-		return 1;
+	if (!vid_header_offset)
+		sprintf(ubi_mtd_param_buffer, "%s", info->name);
+	else
+		sprintf(ubi_mtd_param_buffer, "%s,%s", info->name,
+			vid_header_offset);
 
-	sprintf(buffer, "mtd=%d", pnum);
-	memset(&mtd_part, 0, sizeof(mtd_part));
-	mtd_part.name = buffer;
-	mtd_part.size = part->size;
-	mtd_part.offset = part->offset;
-	add_mtd_partitions(info, &mtd_part, 1);
-
-	strcpy(ubi_mtd_param_buffer, buffer);
-	if (vid_header_offset)
-		sprintf(ubi_mtd_param_buffer, "mtd=%d,%s", pnum,
-				vid_header_offset);
 	err = ubi_mtd_param_parse(ubi_mtd_param_buffer, NULL);
-	if (err) {
-		del_mtd_partitions(info);
+	if (err)
 		return -err;
-	}
 
 	err = ubi_init();
-	if (err) {
-		del_mtd_partitions(info);
+	if (err)
 		return -err;
-	}
-
-	ubi_initialized = 1;
 
 	return 0;
 }
@@ -469,50 +435,33 @@ int ubi_detach(void)
 	/*
 	 * Call ubi_exit() before re-initializing the UBI subsystem
 	 */
-	if (ubi_initialized) {
+	if (ubi)
 		ubi_exit();
-		del_mtd_partitions(ubi_dev.mtd_info);
-		ubi_initialized = 0;
-	}
 
-	ubi_dev.selected = 0;
+	ubi = NULL;
+
 	return 0;
 }
 
 int ubi_part(char *part_name, const char *vid_header_offset)
 {
+	struct mtd_info *mtd;
 	int err = 0;
-	char mtd_dev[16];
-	struct mtd_device *dev;
-	struct part_info *part;
-	u8 pnum;
 
 	ubi_detach();
-	/*
-	 * Search the mtd device number where this partition
-	 * is located
-	 */
-	if (find_dev_and_part(part_name, &dev, &pnum, &part)) {
+
+	mtd_probe_devices();
+	mtd = get_mtd_device_nm(part_name);
+	if (IS_ERR(mtd)) {
 		printf("Partition %s not found!\n", part_name);
 		return 1;
 	}
-	sprintf(mtd_dev, "%s%d", MTD_DEV_TYPE(dev->id->type), dev->id->num);
-	ubi_dev.mtd_info = get_mtd_device_nm(mtd_dev);
-	if (IS_ERR(ubi_dev.mtd_info)) {
-		printf("Partition %s not found on device %s!\n", part_name,
-		       mtd_dev);
-		return 1;
-	}
+	put_mtd_device(mtd);
 
-	ubi_dev.selected = 1;
-
-	strcpy(ubi_dev.part_name, part_name);
-	err = ubi_dev_scan(ubi_dev.mtd_info, ubi_dev.part_name,
-			vid_header_offset);
+	err = ubi_dev_scan(mtd, vid_header_offset);
 	if (err) {
 		printf("UBI init error %d\n", err);
 		printf("Please check, if the correct MTD partition is used (size big enough?)\n");
-		ubi_dev.selected = 0;
 		return err;
 	}
 
@@ -543,13 +492,13 @@ static int do_ubi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 
 		/* Print current partition */
 		if (argc == 2) {
-			if (!ubi_dev.selected) {
-				printf("Error, no UBI device/partition selected!\n");
+			if (!ubi) {
+				printf("Error, no UBI device selected!\n");
 				return 1;
 			}
 
-			printf("Device %d: %s, partition %s\n",
-			       ubi_dev.nr, ubi_dev.mtd_info->name, ubi_dev.part_name);
+			printf("Device %d: %s, MTD partition %s\n",
+			       ubi->ubi_num, ubi->ubi_name, ubi->mtd->name);
 			return 0;
 		}
 
@@ -562,8 +511,8 @@ static int do_ubi(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 		return ubi_part(argv[2], vid_header_offset);
 	}
 
-	if ((strcmp(argv[1], "part") != 0) && (!ubi_dev.selected)) {
-		printf("Error, no UBI device/partition selected!\n");
+	if ((strcmp(argv[1], "part") != 0) && !ubi) {
+		printf("Error, no UBI device selected!\n");
 		return 1;
 	}
 

common/spl/Kconfig

@@ -487,7 +487,7 @@ config SPL_NAND_SUPPORT
 	help
 	  Enable support for NAND (Negative AND) flash in SPL. NAND flash
 	  can be used to allow SPL to load U-Boot from supported devices.
-	  This enables the drivers in drivers/mtd/nand as part of an SPL
+	  This enables the drivers in drivers/mtd/nand/raw as part of an SPL
 	  build.
 
 config SPL_NET_SUPPORT

common/spl/spl_spi.c

@@ -2,7 +2,7 @@
 /*
  * Copyright (C) 2011 OMICRON electronics GmbH
  *
- * based on drivers/mtd/nand/nand_spl_load.c
+ * based on drivers/mtd/nand/raw/nand_spl_load.c
  *
  * Copyright (C) 2011
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.

configs/ls1012afrwy_qspi_SECURE_BOOT_defconfig

@@ -30,6 +30,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 # CONFIG_BLK is not set
 CONFIG_DM_MMC=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_FSL_PFE=y
@@ -40,6 +41,8 @@ CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE=y
 CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y

configs/ls1012afrwy_qspi_defconfig

@@ -31,6 +31,7 @@ CONFIG_NET_RANDOM_ETHADDR=y
 CONFIG_DM=y
 # CONFIG_BLK is not set
 CONFIG_DM_MMC=y
+CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_WINBOND=y
 CONFIG_FSL_PFE=y
@@ -41,6 +42,8 @@ CONFIG_DM_PCI=y
 CONFIG_DM_PCI_COMPAT=y
 CONFIG_PCIE_LAYERSCAPE=y
 CONFIG_SYS_NS16550=y
+CONFIG_SPI=y
+CONFIG_DM_SPI=y
 CONFIG_USB=y
 CONFIG_DM_USB=y
 CONFIG_USB_XHCI_HCD=y

doc/README.SPL

@@ -57,11 +57,11 @@ CONFIG_SPL_FAT_SUPPORT (fs/fat/libfat.o)
 CONFIG_SPL_EXT_SUPPORT
 CONFIG_SPL_LIBGENERIC_SUPPORT (lib/libgeneric.o)
 CONFIG_SPL_POWER_SUPPORT (drivers/power/libpower.o)
-CONFIG_SPL_NAND_SUPPORT (drivers/mtd/nand/libnand.o)
+CONFIG_SPL_NAND_SUPPORT (drivers/mtd/nand/raw/libnand.o)
 CONFIG_SPL_DRIVERS_MISC_SUPPORT (drivers/misc)
 CONFIG_SPL_DMA_SUPPORT (drivers/dma/libdma.o)
 CONFIG_SPL_POST_MEM_SUPPORT (post/drivers/memory.o)
-CONFIG_SPL_NAND_LOAD (drivers/mtd/nand/nand_spl_load.o)
+CONFIG_SPL_NAND_LOAD (drivers/mtd/nand/raw/nand_spl_load.o)
 CONFIG_SPL_SPI_LOAD (drivers/mtd/spi/spi_spl_load.o)
 CONFIG_SPL_RAM_DEVICE (common/spl/spl.c)
 CONFIG_SPL_WATCHDOG_SUPPORT (drivers/watchdog/libwatchdog.o)

doc/README.arm-relocation

@@ -84,7 +84,7 @@ Relocation with SPL (example for the tx25 booting from NAND Flash):
 - cpu copies the first page from NAND to 0xbb000000 (IMX_NFC_BASE)
   and start with code execution on this address.
 
-- The First page contains u-boot code from drivers/mtd/nand/mxc_nand_spl.c
+- The First page contains u-boot code from drivers/mtd/nand/raw/mxc_nand_spl.c
   which inits the dram, cpu registers, reloacte itself to CONFIG_SPL_TEXT_BASE	and loads
   the "real" u-boot to CONFIG_SYS_NAND_U_BOOT_DST and starts execution
   @CONFIG_SYS_NAND_U_BOOT_START

doc/README.nand

@@ -116,7 +116,7 @@ Configuration Options:
       The maximum number of NAND chips per device to be supported.
 
    CONFIG_SYS_NAND_SELF_INIT
-      Traditionally, glue code in drivers/mtd/nand/nand.c has driven
+      Traditionally, glue code in drivers/mtd/nand/raw/nand.c has driven
       the initialization process -- it provides the mtd and nand
       structs, calls a board init function for a specific device,
       calls nand_scan(), and registers with mtd.
@@ -125,7 +125,7 @@ Configuration Options:
       run code between nand_scan_ident() and nand_scan_tail(), or other
       deviations from the "normal" flow.
 
-      If a board defines CONFIG_SYS_NAND_SELF_INIT, drivers/mtd/nand/nand.c
+      If a board defines CONFIG_SYS_NAND_SELF_INIT, drivers/mtd/nand/raw/nand.c
       will make one call to board_nand_init(), with no arguments.  That
       function is responsible for calling a driver init function for
       each NAND device on the board, that performs all initialization
@@ -280,7 +280,7 @@ NOTE:
 =====
 
 The Disk On Chip driver is currently broken and has been for some time.
-There is a driver in drivers/mtd/nand, taken from Linux, that works with
+There is a driver in drivers/mtd/nand/raw, taken from Linux, that works with
 the current NAND system but has not yet been adapted to the u-boot
 environment.
 

doc/README.zynq

@@ -63,7 +63,7 @@ bootmode strings at runtime.
   spi - drivers/spi/zynq_spi.c
   qspi - drivers/spi/zynq_qspi.c
   i2c - drivers/i2c/zynq_i2c.c
-  nand - drivers/mtd/nand/zynq_nand.c
+  nand - drivers/mtd/nand/raw/zynq_nand.c
 - Done proper cleanups on board configurations
 - Added basic FDT support for zynq boards
 - d-cache support for zynq_gem.c

doc/device-tree-bindings/mtd/spi-nand.txt

@@ -0,0 +1,5 @@
+SPI NAND flash
+
+Required properties:
+- compatible: should be "spi-nand"
+- reg: should encode the chip-select line used to access the NAND chip

drivers/Makefile

@@ -6,7 +6,7 @@ obj-$(CONFIG_$(SPL_TPL_)DRIVERS_MISC_SUPPORT) += misc/ sysreset/ firmware/
 obj-$(CONFIG_$(SPL_TPL_)I2C_SUPPORT) += i2c/
 obj-$(CONFIG_$(SPL_TPL_)LED) += led/
 obj-$(CONFIG_$(SPL_TPL_)MMC_SUPPORT) += mmc/
-obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += mtd/nand/
+obj-$(CONFIG_$(SPL_TPL_)NAND_SUPPORT) += mtd/nand/raw/
 obj-$(CONFIG_$(SPL_TPL_)PHY) += phy/
 obj-$(CONFIG_$(SPL_TPL_)PINCTRL) += pinctrl/
 obj-$(CONFIG_$(SPL_TPL_)RAM) += ram/

drivers/mtd/Kconfig

@@ -1,5 +1,8 @@
 menu "MTD Support"
 
+config MTD_PARTITIONS
+	bool
+
 config MTD
 	bool "Enable Driver Model for MTD drivers"
 	depends on DM
@@ -59,10 +62,10 @@ config RENESAS_RPC_HF
 	  This enables access to Hyperflash memory through the Renesas
 	  RCar Gen3 RPC controller.
 
-endmenu
-
 source "drivers/mtd/nand/Kconfig"
 
 source "drivers/mtd/spi/Kconfig"
 
 source "drivers/mtd/ubi/Kconfig"
+
+endmenu

drivers/mtd/Makefile

@@ -3,7 +3,7 @@
 # (C) Copyright 2000-2007
 # Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 
-ifneq (,$(findstring y,$(CONFIG_MTD_DEVICE)$(CONFIG_CMD_NAND)$(CONFIG_CMD_ONENAND)$(CONFIG_CMD_SF)))
+ifneq (,$(findstring y,$(CONFIG_MTD_DEVICE)$(CONFIG_CMD_NAND)$(CONFIG_CMD_ONENAND)$(CONFIG_CMD_SF)$(CONFIG_CMD_MTD)))
 obj-y += mtdcore.o mtd_uboot.o
 endif
 obj-$(CONFIG_MTD) += mtd-uclass.o
@@ -18,3 +18,5 @@ obj-$(CONFIG_FLASH_PIC32) += pic32_flash.o
 obj-$(CONFIG_ST_SMI) += st_smi.o
 obj-$(CONFIG_STM32_FLASH) += stm32_flash.o
 obj-$(CONFIG_RENESAS_RPC_HF) += renesas_rpc_hf.o
+
+obj-y += nand/

drivers/mtd/mtd-uclass.c

@@ -5,9 +5,25 @@
 
 #include <common.h>
 #include <dm.h>
+#include <dm/device-internal.h>
 #include <errno.h>
 #include <mtd.h>
 
+/**
+ * mtd_probe - Probe the device @dev if not already done
+ *
+ * @dev: U-Boot device to probe
+ *
+ * @return 0 on success, an error otherwise.
+ */
+int mtd_probe(struct udevice *dev)
+{
+	if (device_active(dev))
+		return 0;
+
+	return device_probe(dev);
+}
+
 /*
  * Implement a MTD uclass which should include most flash drivers.
  * The uclass private is pointed to mtd_info.

drivers/mtd/mtd_uboot.c

@@ -4,8 +4,230 @@
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  */
 #include <common.h>
+#include <dm/device.h>
+#include <dm/uclass-internal.h>
+#include <jffs2/jffs2.h> /* LEGACY */
 #include <linux/mtd/mtd.h>
-#include <jffs2/jffs2.h>
+#include <linux/mtd/partitions.h>
+#include <mtd.h>
+
+#define MTD_NAME_MAX_LEN 20
+
+
+/**
+ * mtd_search_alternate_name - Search an alternate name for @mtdname thanks to
+ *                             the mtdids legacy environment variable.
+ *
+ * The mtdids string is a list of comma-separated 'dev_id=mtd_id' tupples.
+ * Check if one of the mtd_id matches mtdname, in this case save dev_id in
+ * altname.
+ *
+ * @mtdname: Current MTD device name
+ * @altname: Alternate name to return
+ * @max_len: Length of the alternate name buffer
+ *
+ * @return 0 on success, an error otherwise.
+ */
+int mtd_search_alternate_name(const char *mtdname, char *altname,
+			      unsigned int max_len)
+{
+	const char *mtdids, *equal, *comma, *dev_id, *mtd_id;
+	int dev_id_len, mtd_id_len;
+
+	mtdids = env_get("mtdids");
+	if (!mtdids)
+		return -EINVAL;
+
+	do {
+		/* Find the '=' sign */
+		dev_id = mtdids;
+		equal = strchr(dev_id, '=');
+		if (!equal)
+			break;
+		dev_id_len = equal - mtdids;
+		mtd_id = equal + 1;
+
+		/* Find the end of the tupple */
+		comma = strchr(mtdids, ',');
+		if (comma)
+			mtd_id_len = comma - mtd_id;
+		else
+			mtd_id_len = &mtdids[strlen(mtdids)] - mtd_id + 1;
+
+		if (!dev_id_len || !mtd_id_len)
+			return -EINVAL;
+
+		if (dev_id_len + 1 > max_len)
+			continue;
+
+		/* Compare the name we search with the current mtd_id */
+		if (!strncmp(mtdname, mtd_id, mtd_id_len)) {
+			strncpy(altname, dev_id, dev_id_len);
+			altname[dev_id_len] = 0;
+
+			return 0;
+		}
+
+		/* Go to the next tupple */
+		mtdids = comma + 1;
+	} while (comma);
+
+	return -EINVAL;
+}
+
+#if IS_ENABLED(CONFIG_MTD)
+static void mtd_probe_uclass_mtd_devs(void)
+{
+	struct udevice *dev;
+	int idx = 0;
+
+	/* Probe devices with DM compliant drivers */
+	while (!uclass_find_device(UCLASS_MTD, idx, &dev) && dev) {
+		mtd_probe(dev);
+		idx++;
+	}
+}
+#else
+static void mtd_probe_uclass_mtd_devs(void) { }
+#endif
+
+#if defined(CONFIG_MTD_PARTITIONS)
+int mtd_probe_devices(void)
+{
+	static char *old_mtdparts;
+	static char *old_mtdids;
+	const char *mtdparts = env_get("mtdparts");
+	const char *mtdids = env_get("mtdids");
+	bool remaining_partitions = true;
+	struct mtd_info *mtd;
+
+	mtd_probe_uclass_mtd_devs();
+
+	/* Check if mtdparts/mtdids changed since last call, otherwise: exit */
+	if (!strcmp(mtdparts, old_mtdparts) && !strcmp(mtdids, old_mtdids))
+		return 0;
+
+	/* Update the local copy of mtdparts */
+	free(old_mtdparts);
+	free(old_mtdids);
+	old_mtdparts = strdup(mtdparts);
+	old_mtdids = strdup(mtdids);
+
+	/* If at least one partition is still in use, do not delete anything */
+	mtd_for_each_device(mtd) {
+		if (mtd->usecount) {
+			printf("Partition \"%s\" already in use, aborting\n",
+			       mtd->name);
+			return -EACCES;
+		}
+	}
+
+	/*
+	 * Everything looks clear, remove all partitions. It is not safe to
+	 * remove entries from the mtd_for_each_device loop as it uses idr
+	 * indexes and the partitions removal is done in bulk (all partitions of
+	 * one device at the same time), so break and iterate from start each
+	 * time a new partition is found and deleted.
+	 */
+	while (remaining_partitions) {
+		remaining_partitions = false;
+		mtd_for_each_device(mtd) {
+			if (!mtd_is_partition(mtd) && mtd_has_partitions(mtd)) {
+				del_mtd_partitions(mtd);
+				remaining_partitions = true;
+				break;
+			}
+		}
+	}
+
+	/* Start the parsing by ignoring the extra 'mtdparts=' prefix, if any */
+	if (strstr(mtdparts, "mtdparts="))
+		mtdparts += 9;
+
+	/* For each MTD device in mtdparts */
+	while (mtdparts[0] != '\0') {
+		char mtd_name[MTD_NAME_MAX_LEN], *colon;
+		struct mtd_partition *parts;
+		int mtd_name_len, nparts;
+		int ret;
+
+		colon = strchr(mtdparts, ':');
+		if (!colon) {
+			printf("Wrong mtdparts: %s\n", mtdparts);
+			return -EINVAL;
+		}
+
+		mtd_name_len = colon - mtdparts;
+		strncpy(mtd_name, mtdparts, mtd_name_len);
+		mtd_name[mtd_name_len] = '\0';
+		/* Move the pointer forward (including the ':') */
+		mtdparts += mtd_name_len + 1;
+		mtd = get_mtd_device_nm(mtd_name);
+		if (IS_ERR_OR_NULL(mtd)) {
+			char linux_name[MTD_NAME_MAX_LEN];
+
+			/*
+			 * The MTD device named "mtd_name" does not exist. Try
+			 * to find a correspondance with an MTD device having
+			 * the same type and number as defined in the mtdids.
+			 */
+			debug("No device named %s\n", mtd_name);
+			ret = mtd_search_alternate_name(mtd_name, linux_name,
+							MTD_NAME_MAX_LEN);
+			if (!ret)
+				mtd = get_mtd_device_nm(linux_name);
+
+			/*
+			 * If no device could be found, move the mtdparts
+			 * pointer forward until the next set of partitions.
+			 */
+			if (ret || IS_ERR_OR_NULL(mtd)) {
+				printf("Could not find a valid device for %s\n",
+				       mtd_name);
+				mtdparts = strchr(mtdparts, ';');
+				if (mtdparts)
+					mtdparts++;
+
+				continue;
+			}
+		}
+
+		/*
+		 * Parse the MTD device partitions. It will update the mtdparts
+		 * pointer, create an array of parts (that must be freed), and
+		 * return the number of partition structures in the array.
+		 */
+		ret = mtd_parse_partitions(mtd, &mtdparts, &parts, &nparts);
+		if (ret) {
+			printf("Could not parse device %s\n", mtd->name);
+			put_mtd_device(mtd);
+			return -EINVAL;
+		}
+
+		if (!nparts)
+			continue;
+
+		/* Create the new MTD partitions */
+		add_mtd_partitions(mtd, parts, nparts);
+
+		/* Free the structures allocated during the parsing */
+		mtd_free_parsed_partitions(parts, nparts);
+
+		put_mtd_device(mtd);
+	}
+
+	return 0;
+}
+#else
+int mtd_probe_devices(void)
+{
+	mtd_probe_uclass_mtd_devs();
+
+	return 0;
+}
+#endif /* defined(CONFIG_MTD_PARTITIONS) */
+
+/* Legacy */
 
 static int get_part(const char *partname, int *idx, loff_t *off, loff_t *size,
 		loff_t *maxsize, int devtype)

drivers/mtd/mtdcore.c

@@ -426,6 +426,8 @@ int add_mtd_device(struct mtd_info *mtd)
 	mtd->index = i;
 	mtd->usecount = 0;
 
+	INIT_LIST_HEAD(&mtd->partitions);
+
 	/* default value if not set by driver */
 	if (mtd->bitflip_threshold == 0)
 		mtd->bitflip_threshold = mtd->ecc_strength;
@@ -937,7 +939,20 @@ int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
 	 * representing the maximum number of bitflips that were corrected on
 	 * any one ecc region (if applicable; zero otherwise).
 	 */
-	ret_code = mtd->_read(mtd, from, len, retlen, buf);
+	if (mtd->_read) {
+		ret_code = mtd->_read(mtd, from, len, retlen, buf);
+	} else if (mtd->_read_oob) {
+		struct mtd_oob_ops ops = {
+			.len = len,
+			.datbuf = buf,
+		};
+
+		ret_code = mtd->_read_oob(mtd, from, &ops);
+		*retlen = ops.retlen;
+	} else {
+		return -ENOTSUPP;
+	}
+
 	if (unlikely(ret_code < 0))
 		return ret_code;
 	if (mtd->ecc_strength == 0)
@@ -952,10 +967,24 @@ int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
 	*retlen = 0;
 	if (to < 0 || to > mtd->size || len > mtd->size - to)
 		return -EINVAL;
-	if (!mtd->_write || !(mtd->flags & MTD_WRITEABLE))
+	if ((!mtd->_write && !mtd->_write_oob) ||
+	    !(mtd->flags & MTD_WRITEABLE))
 		return -EROFS;
 	if (!len)
 		return 0;
+
+	if (!mtd->_write) {
+		struct mtd_oob_ops ops = {
+			.len = len,
+			.datbuf = (u8 *)buf,
+		};
+		int ret;
+
+		ret = mtd->_write_oob(mtd, to, &ops);
+		*retlen = ops.retlen;
+		return ret;
+	}
+
 	return mtd->_write(mtd, to, len, retlen, buf);
 }
 EXPORT_SYMBOL_GPL(mtd_write);
@@ -983,19 +1012,64 @@ int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
 }
 EXPORT_SYMBOL_GPL(mtd_panic_write);
 
+static int mtd_check_oob_ops(struct mtd_info *mtd, loff_t offs,
+			     struct mtd_oob_ops *ops)
+{
+	/*
+	 * Some users are setting ->datbuf or ->oobbuf to NULL, but are leaving
+	 * ->len or ->ooblen uninitialized. Force ->len and ->ooblen to 0 in
+	 *  this case.
+	 */
+	if (!ops->datbuf)
+		ops->len = 0;
+
+	if (!ops->oobbuf)
+		ops->ooblen = 0;
+
+	if (offs < 0 || offs + ops->len > mtd->size)
+		return -EINVAL;
+
+	if (ops->ooblen) {
+		u64 maxooblen;
+
+		if (ops->ooboffs >= mtd_oobavail(mtd, ops))
+			return -EINVAL;
+
+		maxooblen = ((mtd_div_by_ws(mtd->size, mtd) -
+			      mtd_div_by_ws(offs, mtd)) *
+			     mtd_oobavail(mtd, ops)) - ops->ooboffs;
+		if (ops->ooblen > maxooblen)
+			return -EINVAL;
+	}
+
+	return 0;
+}
+
 int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops)
 {
 	int ret_code;
 	ops->retlen = ops->oobretlen = 0;
-	if (!mtd->_read_oob)
+
+	ret_code = mtd_check_oob_ops(mtd, from, ops);
+	if (ret_code)
+		return ret_code;
+
+	/* Check the validity of a potential fallback on mtd->_read */
+	if (!mtd->_read_oob && (!mtd->_read || ops->oobbuf))
 		return -EOPNOTSUPP;
+
+	if (mtd->_read_oob)
+		ret_code = mtd->_read_oob(mtd, from, ops);
+	else
+		ret_code = mtd->_read(mtd, from, ops->len, &ops->retlen,
+				      ops->datbuf);
+
 	/*
 	 * In cases where ops->datbuf != NULL, mtd->_read_oob() has semantics
 	 * similar to mtd->_read(), returning a non-negative integer
 	 * representing max bitflips. In other cases, mtd->_read_oob() may
 	 * return -EUCLEAN. In all cases, perform similar logic to mtd_read().
 	 */
-	ret_code = mtd->_read_oob(mtd, from, ops);
 	if (unlikely(ret_code < 0))
 		return ret_code;
 	if (mtd->ecc_strength == 0)
@@ -1004,6 +1078,32 @@ int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops)
 }
 EXPORT_SYMBOL_GPL(mtd_read_oob);
 
+int mtd_write_oob(struct mtd_info *mtd, loff_t to,
+				struct mtd_oob_ops *ops)
+{
+	int ret;
+
+	ops->retlen = ops->oobretlen = 0;
+
+	if (!(mtd->flags & MTD_WRITEABLE))
+		return -EROFS;
+
+	ret = mtd_check_oob_ops(mtd, to, ops);
+	if (ret)
+		return ret;
+
+	/* Check the validity of a potential fallback on mtd->_write */
+	if (!mtd->_write_oob && (!mtd->_write || ops->oobbuf))
+		return -EOPNOTSUPP;
+
+	if (mtd->_write_oob)
+		return mtd->_write_oob(mtd, to, ops);
+	else
+		return mtd->_write(mtd, to, ops->len, &ops->retlen,
+				   ops->datbuf);
+}
+EXPORT_SYMBOL_GPL(mtd_write_oob);
+
 /**
  * mtd_ooblayout_ecc - Get the OOB region definition of a specific ECC section
  * @mtd: MTD device structure

drivers/mtd/mtdcore.h

@@ -5,7 +5,6 @@
 
 extern struct mutex mtd_table_mutex;
 
-struct mtd_info *__mtd_next_device(int i);
 int add_mtd_device(struct mtd_info *mtd);
 int del_mtd_device(struct mtd_info *mtd);
 int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
@@ -16,8 +15,3 @@ int parse_mtd_partitions(struct mtd_info *master, const char * const *types,
 
 int __init init_mtdchar(void);
 void __exit cleanup_mtdchar(void);
-
-#define mtd_for_each_device(mtd)			\
-	for ((mtd) = __mtd_next_device(0);		\
-	     (mtd) != NULL;				\
-	     (mtd) = __mtd_next_device(mtd->index + 1))

drivers/mtd/mtdpart.c

@@ -26,32 +26,16 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/err.h>
+#include <linux/sizes.h>
 
 #include "mtdcore.h"
 
-/* Our partition linked list */
-static LIST_HEAD(mtd_partitions);
 #ifndef __UBOOT__
 static DEFINE_MUTEX(mtd_partitions_mutex);
 #else
 DEFINE_MUTEX(mtd_partitions_mutex);
 #endif
 
-/* Our partition node structure */
-struct mtd_part {
-	struct mtd_info mtd;
-	struct mtd_info *master;
-	uint64_t offset;
-	struct list_head list;
-};
-
-/*
- * Given a pointer to the MTD object in the mtd_part structure, we can retrieve
- * the pointer to that structure with this macro.
- */
-#define PART(x)  ((struct mtd_part *)(x))
-
-
 #ifdef __UBOOT__
 /* from mm/util.c */
 
@@ -76,6 +60,215 @@ char *kstrdup(const char *s, gfp_t gfp)
 }
 #endif
 
+#define MTD_SIZE_REMAINING		(~0LLU)
+#define MTD_OFFSET_NOT_SPECIFIED	(~0LLU)
+
+/**
+ * mtd_parse_partition - Parse @mtdparts partition definition, fill @partition
+ *                       with it and update the @mtdparts string pointer.
+ *
+ * The partition name is allocated and must be freed by the caller.
+ *
+ * This function is widely inspired from part_parse (mtdparts.c).
+ *
+ * @mtdparts: String describing the partition with mtdparts command syntax
+ * @partition: MTD partition structure to fill
+ *
+ * @return 0 on success, an error otherwise.
+ */
+static int mtd_parse_partition(const char **_mtdparts,
+			       struct mtd_partition *partition)
+{
+	const char *mtdparts = *_mtdparts;
+	const char *name = NULL;
+	int name_len;
+	char *buf;
+
+	/* Ensure the partition structure is empty */
+	memset(partition, 0, sizeof(struct mtd_partition));
+
+	/* Fetch the partition size */
+	if (*mtdparts == '-') {
+		/* Assign all remaining space to this partition */
+		partition->size = MTD_SIZE_REMAINING;
+		mtdparts++;
+	} else {
+		partition->size = ustrtoull(mtdparts, (char **)&mtdparts, 0);
+		if (partition->size < SZ_4K) {
+			printf("Minimum partition size 4kiB, %lldB requested\n",
+			       partition->size);
+			return -EINVAL;
+		}
+	}
+
+	/* Check for the offset */
+	partition->offset = MTD_OFFSET_NOT_SPECIFIED;
+	if (*mtdparts == '@') {
+		mtdparts++;
+		partition->offset = ustrtoull(mtdparts, (char **)&mtdparts, 0);
+	}
+
+	/* Now look for the name */
+	if (*mtdparts == '(') {
+		name = ++mtdparts;
+		mtdparts = strchr(name, ')');
+		if (!mtdparts) {
+			printf("No closing ')' found in partition name\n");
+			return -EINVAL;
+		}
+		name_len = mtdparts - name + 1;
+		if ((name_len - 1) == 0) {
+			printf("Empty partition name\n");
+			return -EINVAL;
+		}
+		mtdparts++;
+	} else {
+		/* Name will be of the form size@offset */
+		name_len = 22;
+	}
+
+	/* Check if the partition is read-only */
+	if (strncmp(mtdparts, "ro", 2) == 0) {
+		partition->mask_flags |= MTD_WRITEABLE;
+		mtdparts += 2;
+	}
+
+	/* Check for a potential next partition definition */
+	if (*mtdparts == ',') {
+		if (partition->size == MTD_SIZE_REMAINING) {
+			printf("No partitions allowed after a fill-up\n");
+			return -EINVAL;
+		}
+		++mtdparts;
+	} else if ((*mtdparts == ';') || (*mtdparts == '\0')) {
+		/* NOP */
+	} else {
+		printf("Unexpected character '%c' in mtdparts\n", *mtdparts);
+		return -EINVAL;
+	}
+
+	/*
+	 * Allocate a buffer for the name and either copy the provided name or
+	 * auto-generate it with the form 'size@offset'.
+	 */
+	buf = malloc(name_len);
+	if (!buf)
+		return -ENOMEM;
+
+	if (name)
+		strncpy(buf, name, name_len - 1);
+	else
+		snprintf(buf, name_len, "0x%08llx@0x%08llx",
+			 partition->size, partition->offset);
+
+	buf[name_len - 1] = '\0';
+	partition->name = buf;
+
+	*_mtdparts = mtdparts;
+
+	return 0;
+}
+
+/**
+ * mtd_parse_partitions - Create a partition array from an mtdparts definition
+ *
+ * Stateless function that takes a @parent MTD device, a string @_mtdparts
+ * describing the partitions (with the "mtdparts" command syntax) and creates
+ * the corresponding MTD partition structure array @_parts. Both the name and
+ * the structure partition itself must be freed freed, the caller may use
+ * @mtd_free_parsed_partitions() for this purpose.
+ *
+ * @parent: MTD device which contains the partitions
+ * @_mtdparts: Pointer to a string describing the partitions with "mtdparts"
+ *             command syntax.
+ * @_parts: Allocated array containing the partitions, must be freed by the
+ *          caller.
+ * @_nparts: Size of @_parts array.
+ *
+ * @return 0 on success, an error otherwise.
+ */
+int mtd_parse_partitions(struct mtd_info *parent, const char **_mtdparts,
+			 struct mtd_partition **_parts, int *_nparts)
+{
+	struct mtd_partition partition = {}, *parts;
+	const char *mtdparts = *_mtdparts;
+	int cur_off = 0, cur_sz = 0;
+	int nparts = 0;
+	int ret, idx;
+	u64 sz;
+
+	/* First, iterate over the partitions until we know their number */
+	while (mtdparts[0] != '\0' && mtdparts[0] != ';') {
+		ret = mtd_parse_partition(&mtdparts, &partition);
+		if (ret)
+			return ret;
+
+		free((char *)partition.name);
+		nparts++;
+	}
+
+	/* Allocate an array of partitions to give back to the caller */
+	parts = malloc(sizeof(*parts) * nparts);
+	if (!parts) {
+		printf("Not enough space to save partitions meta-data\n");
+		return -ENOMEM;
+	}
+
+	/* Iterate again over each partition to save the data in our array */
+	for (idx = 0; idx < nparts; idx++) {
+		ret = mtd_parse_partition(_mtdparts, &parts[idx]);
+		if (ret)
+			return ret;
+
+		if (parts[idx].size == MTD_SIZE_REMAINING)
+			parts[idx].size = parent->size - cur_sz;
+		cur_sz += parts[idx].size;
+
+		sz = parts[idx].size;
+		if (sz < parent->writesize || do_div(sz, parent->writesize)) {
+			printf("Partition size must be a multiple of %d\n",
+			       parent->writesize);
+			return -EINVAL;
+		}
+
+		if (parts[idx].offset == MTD_OFFSET_NOT_SPECIFIED)
+			parts[idx].offset = cur_off;
+		cur_off += parts[idx].size;
+
+		parts[idx].ecclayout = parent->ecclayout;
+	}
+
+	/* Offset by one mtdparts to point to the next device if any */
+	if (*_mtdparts[0] == ';')
+		(*_mtdparts)++;
+
+	*_parts = parts;
+	*_nparts = nparts;
+
+	return 0;
+}
+
+/**
+ * mtd_free_parsed_partitions - Free dynamically allocated partitions
+ *
+ * Each successful call to @mtd_parse_partitions must be followed by a call to
+ * @mtd_free_parsed_partitions to free any allocated array during the parsing
+ * process.
+ *
+ * @parts: Array containing the partitions that will be freed.
+ * @nparts: Size of @parts array.
+ */
+void mtd_free_parsed_partitions(struct mtd_partition *parts,
+				unsigned int nparts)
+{
+	int i;
+
+	for (i = 0; i < nparts; i++)
+		free((char *)parts[i].name);
+
+	free(parts);
+}
+
 /*
  * MTD methods which simply translate the effective address and pass through
  * to the _real_ device.
@@ -84,19 +277,18 @@ char *kstrdup(const char *s, gfp_t gfp)
 static int part_read(struct mtd_info *mtd, loff_t from, size_t len,
 		size_t *retlen, u_char *buf)
 {
-	struct mtd_part *part = PART(mtd);
 	struct mtd_ecc_stats stats;
 	int res;
 
-	stats = part->master->ecc_stats;
-	res = part->master->_read(part->master, from + part->offset, len,
-				  retlen, buf);
+	stats = mtd->parent->ecc_stats;
+	res = mtd->parent->_read(mtd->parent, from + mtd->offset, len,
+				 retlen, buf);
 	if (unlikely(mtd_is_eccerr(res)))
 		mtd->ecc_stats.failed +=
-			part->master->ecc_stats.failed - stats.failed;
+			mtd->parent->ecc_stats.failed - stats.failed;
 	else
 		mtd->ecc_stats.corrected +=
-			part->master->ecc_stats.corrected - stats.corrected;
+			mtd->parent->ecc_stats.corrected - stats.corrected;
 	return res;
 }
 
@@ -104,17 +296,13 @@ static int part_read(struct mtd_info *mtd, loff_t from, size_t len,
 static int part_point(struct mtd_info *mtd, loff_t from, size_t len,
 		size_t *retlen, void **virt, resource_size_t *phys)
 {
-	struct mtd_part *part = PART(mtd);
-
-	return part->master->_point(part->master, from + part->offset, len,
-				    retlen, virt, phys);
+	return mtd->parent->_point(mtd->parent, from + mtd->offset, len,
+				   retlen, virt, phys);
 }
 
 static int part_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
 {
-	struct mtd_part *part = PART(mtd);
-
-	return part->master->_unpoint(part->master, from + part->offset, len);
+	return mtd->parent->_unpoint(mtd->parent, from + mtd->offset, len);
 }
 #endif
 
@@ -123,17 +311,13 @@ static unsigned long part_get_unmapped_area(struct mtd_info *mtd,
 					    unsigned long offset,
 					    unsigned long flags)
 {
-	struct mtd_part *part = PART(mtd);
-
-	offset += part->offset;
-	return part->master->_get_unmapped_area(part->master, len, offset,
-						flags);
+	offset += mtd->offset;
+	return mtd->parent->_get_unmapped_area(mtd->parent, len, offset, flags);
 }
 
 static int part_read_oob(struct mtd_info *mtd, loff_t from,
 		struct mtd_oob_ops *ops)
 {
-	struct mtd_part *part = PART(mtd);
 	int res;
 
 	if (from >= mtd->size)
@@ -158,7 +342,7 @@ static int part_read_oob(struct mtd_info *mtd, loff_t from,
 			return -EINVAL;
 	}
 
-	res = part->master->_read_oob(part->master, from + part->offset, ops);
+	res = mtd->parent->_read_oob(mtd->parent, from + mtd->offset, ops);
 	if (unlikely(res)) {
 		if (mtd_is_bitflip(res))
 			mtd->ecc_stats.corrected++;
@@ -171,99 +355,87 @@ static int part_read_oob(struct mtd_info *mtd, loff_t from,
 static int part_read_user_prot_reg(struct mtd_info *mtd, loff_t from,
 		size_t len, size_t *retlen, u_char *buf)
 {
-	struct mtd_part *part = PART(mtd);
-	return part->master->_read_user_prot_reg(part->master, from, len,
-						 retlen, buf);
+	return mtd->parent->_read_user_prot_reg(mtd->parent, from, len,
+						retlen, buf);
 }
 
 static int part_get_user_prot_info(struct mtd_info *mtd, size_t len,
 				   size_t *retlen, struct otp_info *buf)
 {
-	struct mtd_part *part = PART(mtd);
-	return part->master->_get_user_prot_info(part->master, len, retlen,
-						 buf);
+	return mtd->parent->_get_user_prot_info(mtd->parent, len, retlen,
+						buf);
 }
 
 static int part_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,
 		size_t len, size_t *retlen, u_char *buf)
 {
-	struct mtd_part *part = PART(mtd);
-	return part->master->_read_fact_prot_reg(part->master, from, len,
-						 retlen, buf);
+	return mtd->parent->_read_fact_prot_reg(mtd->parent, from, len,
+						retlen, buf);
 }
 
 static int part_get_fact_prot_info(struct mtd_info *mtd, size_t len,
 				   size_t *retlen, struct otp_info *buf)
 {
-	struct mtd_part *part = PART(mtd);
-	return part->master->_get_fact_prot_info(part->master, len, retlen,
-						 buf);
+	return mtd->parent->_get_fact_prot_info(mtd->parent, len, retlen,
+						buf);
 }
 
 static int part_write(struct mtd_info *mtd, loff_t to, size_t len,
 		size_t *retlen, const u_char *buf)
 {
-	struct mtd_part *part = PART(mtd);
-	return part->master->_write(part->master, to + part->offset, len,
-				    retlen, buf);
+	return mtd->parent->_write(mtd->parent, to + mtd->offset, len,
+				   retlen, buf);
 }
 
 static int part_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
 		size_t *retlen, const u_char *buf)
 {
-	struct mtd_part *part = PART(mtd);
-	return part->master->_panic_write(part->master, to + part->offset, len,
-					  retlen, buf);
+	return mtd->parent->_panic_write(mtd->parent, to + mtd->offset, len,
+					 retlen, buf);
 }
 
 static int part_write_oob(struct mtd_info *mtd, loff_t to,
 		struct mtd_oob_ops *ops)
 {
-	struct mtd_part *part = PART(mtd);
-
 	if (to >= mtd->size)
 		return -EINVAL;
 	if (ops->datbuf && to + ops->len > mtd->size)
 		return -EINVAL;
-	return part->master->_write_oob(part->master, to + part->offset, ops);
+	return mtd->parent->_write_oob(mtd->parent, to + mtd->offset, ops);
 }
 
 static int part_write_user_prot_reg(struct mtd_info *mtd, loff_t from,
 		size_t len, size_t *retlen, u_char *buf)
 {
-	struct mtd_part *part = PART(mtd);
-	return part->master->_write_user_prot_reg(part->master, from, len,
-						  retlen, buf);
+	return mtd->parent->_write_user_prot_reg(mtd->parent, from, len,
+						 retlen, buf);
 }
 
 static int part_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
 		size_t len)
 {
-	struct mtd_part *part = PART(mtd);
-	return part->master->_lock_user_prot_reg(part->master, from, len);
+	return mtd->parent->_lock_user_prot_reg(mtd->parent, from, len);
 }
 
 #ifndef __UBOOT__
 static int part_writev(struct mtd_info *mtd, const struct kvec *vecs,
 		unsigned long count, loff_t to, size_t *retlen)
 {
-	struct mtd_part *part = PART(mtd);
-	return part->master->_writev(part->master, vecs, count,
-				     to + part->offset, retlen);
+	return mtd->parent->_writev(mtd->parent, vecs, count,
+				    to + mtd->offset, retlen);
 }
 #endif
 
 static int part_erase(struct mtd_info *mtd, struct erase_info *instr)
 {
-	struct mtd_part *part = PART(mtd);
 	int ret;
 
-	instr->addr += part->offset;
-	ret = part->master->_erase(part->master, instr);
+	instr->addr += mtd->offset;
+	ret = mtd->parent->_erase(mtd->parent, instr);
 	if (ret) {
 		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
-			instr->fail_addr -= part->offset;
-		instr->addr -= part->offset;
+			instr->fail_addr -= mtd->offset;
+		instr->addr -= mtd->offset;
 	}
 	return ret;
 }
@@ -271,11 +443,9 @@ static int part_erase(struct mtd_info *mtd, struct erase_info *instr)
 void mtd_erase_callback(struct erase_info *instr)
 {
 	if (instr->mtd->_erase == part_erase) {
-		struct mtd_part *part = PART(instr->mtd);
-
 		if (instr->fail_addr != MTD_FAIL_ADDR_UNKNOWN)
-			instr->fail_addr -= part->offset;
-		instr->addr -= part->offset;
+			instr->fail_addr -= instr->mtd->offset;
+		instr->addr -= instr->mtd->offset;
 	}
 	if (instr->callback)
 		instr->callback(instr);
@@ -284,105 +454,112 @@ EXPORT_SYMBOL_GPL(mtd_erase_callback);
 
 static int part_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 {
-	struct mtd_part *part = PART(mtd);
-	return part->master->_lock(part->master, ofs + part->offset, len);
+	return mtd->parent->_lock(mtd->parent, ofs + mtd->offset, len);
 }
 
 static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 {
-	struct mtd_part *part = PART(mtd);
-	return part->master->_unlock(part->master, ofs + part->offset, len);
+	return mtd->parent->_unlock(mtd->parent, ofs + mtd->offset, len);
 }
 
 static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
 {
-	struct mtd_part *part = PART(mtd);
-	return part->master->_is_locked(part->master, ofs + part->offset, len);
+	return mtd->parent->_is_locked(mtd->parent, ofs + mtd->offset, len);
 }
 
 static void part_sync(struct mtd_info *mtd)
 {
-	struct mtd_part *part = PART(mtd);
-	part->master->_sync(part->master);
+	mtd->parent->_sync(mtd->parent);
 }
 
 #ifndef __UBOOT__
 static int part_suspend(struct mtd_info *mtd)
 {
-	struct mtd_part *part = PART(mtd);
-	return part->master->_suspend(part->master);
+	return mtd->parent->_suspend(mtd->parent);
 }
 
 static void part_resume(struct mtd_info *mtd)
 {
-	struct mtd_part *part = PART(mtd);
-	part->master->_resume(part->master);
+	mtd->parent->_resume(mtd->parent);
 }
 #endif
 
 static int part_block_isreserved(struct mtd_info *mtd, loff_t ofs)
 {
-	struct mtd_part *part = PART(mtd);
-	ofs += part->offset;
-	return part->master->_block_isreserved(part->master, ofs);
+	ofs += mtd->offset;
+	return mtd->parent->_block_isreserved(mtd->parent, ofs);
 }
 
 static int part_block_isbad(struct mtd_info *mtd, loff_t ofs)
 {
-	struct mtd_part *part = PART(mtd);
-	ofs += part->offset;
-	return part->master->_block_isbad(part->master, ofs);
+	ofs += mtd->offset;
+	return mtd->parent->_block_isbad(mtd->parent, ofs);
 }
 
 static int part_block_markbad(struct mtd_info *mtd, loff_t ofs)
 {
-	struct mtd_part *part = PART(mtd);
 	int res;
 
-	ofs += part->offset;
-	res = part->master->_block_markbad(part->master, ofs);
+	ofs += mtd->offset;
+	res = mtd->parent->_block_markbad(mtd->parent, ofs);
 	if (!res)
 		mtd->ecc_stats.badblocks++;
 	return res;
 }
 
-static inline void free_partition(struct mtd_part *p)
+static inline void free_partition(struct mtd_info *p)
 {
-	kfree(p->mtd.name);
+	kfree(p->name);
 	kfree(p);
 }
 
 /*
  * This function unregisters and destroy all slave MTD objects which are
- * attached to the given master MTD object.
+ * attached to the given master MTD object, recursively.
  */
-
-int del_mtd_partitions(struct mtd_info *master)
+static int do_del_mtd_partitions(struct mtd_info *master)
 {
-	struct mtd_part *slave, *next;
+	struct mtd_info *slave, *next;
 	int ret, err = 0;
 
-	mutex_lock(&mtd_partitions_mutex);
-	list_for_each_entry_safe(slave, next, &mtd_partitions, list)
-		if (slave->master == master) {
-			ret = del_mtd_device(&slave->mtd);
-			if (ret < 0) {
-				err = ret;
-				continue;
-			}
-			list_del(&slave->list);
-			free_partition(slave);
+	list_for_each_entry_safe(slave, next, &master->partitions, node) {
+		if (mtd_has_partitions(slave))
+			del_mtd_partitions(slave);
+
+		debug("Deleting %s MTD partition\n", slave->name);
+		ret = del_mtd_device(slave);
+		if (ret < 0) {
+			printf("Error when deleting partition \"%s\" (%d)\n",
+			       slave->name, ret);
+			err = ret;
+			continue;
 		}
-	mutex_unlock(&mtd_partitions_mutex);
+
+		list_del(&slave->node);
+		free_partition(slave);
+	}
 
 	return err;
 }
 
-static struct mtd_part *allocate_partition(struct mtd_info *master,
-			const struct mtd_partition *part, int partno,
-			uint64_t cur_offset)
+int del_mtd_partitions(struct mtd_info *master)
 {
-	struct mtd_part *slave;
+	int ret;
+
+	debug("Deleting MTD partitions on \"%s\":\n", master->name);
+
+	mutex_lock(&mtd_partitions_mutex);
+	ret = do_del_mtd_partitions(master);
+	mutex_unlock(&mtd_partitions_mutex);
+
+	return ret;
+}
+
+static struct mtd_info *allocate_partition(struct mtd_info *master,
+					   const struct mtd_partition *part,
+					   int partno, uint64_t cur_offset)
+{
+	struct mtd_info *slave;
 	char *name;
 
 	/* allocate the partition structure */
@@ -397,83 +574,87 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
 	}
 
 	/* set up the MTD object for this partition */
-	slave->mtd.type = master->type;
-	slave->mtd.flags = master->flags & ~part->mask_flags;
-	slave->mtd.size = part->size;
-	slave->mtd.writesize = master->writesize;
-	slave->mtd.writebufsize = master->writebufsize;
-	slave->mtd.oobsize = master->oobsize;
-	slave->mtd.oobavail = master->oobavail;
-	slave->mtd.subpage_sft = master->subpage_sft;
+	slave->type = master->type;
+	slave->flags = master->flags & ~part->mask_flags;
+	slave->size = part->size;
+	slave->writesize = master->writesize;
+	slave->writebufsize = master->writebufsize;
+	slave->oobsize = master->oobsize;
+	slave->oobavail = master->oobavail;
+	slave->subpage_sft = master->subpage_sft;
 
-	slave->mtd.name = name;
-	slave->mtd.owner = master->owner;
+	slave->name = name;
+	slave->owner = master->owner;
 #ifndef __UBOOT__
-	slave->mtd.backing_dev_info = master->backing_dev_info;
+	slave->backing_dev_info = master->backing_dev_info;
 
 	/* NOTE:  we don't arrange MTDs as a tree; it'd be error-prone
 	 * to have the same data be in two different partitions.
 	 */
-	slave->mtd.dev.parent = master->dev.parent;
+	slave->dev.parent = master->dev.parent;
 #endif
 
-	slave->mtd._read = part_read;
-	slave->mtd._write = part_write;
+	if (master->_read)
+		slave->_read = part_read;
+	if (master->_write)
+		slave->_write = part_write;
 
 	if (master->_panic_write)
-		slave->mtd._panic_write = part_panic_write;
+		slave->_panic_write = part_panic_write;
 
 #ifndef __UBOOT__
 	if (master->_point && master->_unpoint) {
-		slave->mtd._point = part_point;
-		slave->mtd._unpoint = part_unpoint;
+		slave->_point = part_point;
+		slave->_unpoint = part_unpoint;
 	}
 #endif
 
 	if (master->_get_unmapped_area)
-		slave->mtd._get_unmapped_area = part_get_unmapped_area;
+		slave->_get_unmapped_area = part_get_unmapped_area;
 	if (master->_read_oob)
-		slave->mtd._read_oob = part_read_oob;
+		slave->_read_oob = part_read_oob;
 	if (master->_write_oob)
-		slave->mtd._write_oob = part_write_oob;
+		slave->_write_oob = part_write_oob;
 	if (master->_read_user_prot_reg)
-		slave->mtd._read_user_prot_reg = part_read_user_prot_reg;
+		slave->_read_user_prot_reg = part_read_user_prot_reg;
 	if (master->_read_fact_prot_reg)
-		slave->mtd._read_fact_prot_reg = part_read_fact_prot_reg;
+		slave->_read_fact_prot_reg = part_read_fact_prot_reg;
 	if (master->_write_user_prot_reg)
-		slave->mtd._write_user_prot_reg = part_write_user_prot_reg;
+		slave->_write_user_prot_reg = part_write_user_prot_reg;
 	if (master->_lock_user_prot_reg)
-		slave->mtd._lock_user_prot_reg = part_lock_user_prot_reg;
+		slave->_lock_user_prot_reg = part_lock_user_prot_reg;
 	if (master->_get_user_prot_info)
-		slave->mtd._get_user_prot_info = part_get_user_prot_info;
+		slave->_get_user_prot_info = part_get_user_prot_info;
 	if (master->_get_fact_prot_info)
-		slave->mtd._get_fact_prot_info = part_get_fact_prot_info;
+		slave->_get_fact_prot_info = part_get_fact_prot_info;
 	if (master->_sync)
-		slave->mtd._sync = part_sync;
+		slave->_sync = part_sync;
 #ifndef __UBOOT__
 	if (!partno && !master->dev.class && master->_suspend &&
 	    master->_resume) {
-			slave->mtd._suspend = part_suspend;
-			slave->mtd._resume = part_resume;
+		slave->_suspend = part_suspend;
+		slave->_resume = part_resume;
 	}
 	if (master->_writev)
-		slave->mtd._writev = part_writev;
+		slave->_writev = part_writev;
 #endif
 	if (master->_lock)
-		slave->mtd._lock = part_lock;
+		slave->_lock = part_lock;
 	if (master->_unlock)
-		slave->mtd._unlock = part_unlock;
+		slave->_unlock = part_unlock;
 	if (master->_is_locked)
-		slave->mtd._is_locked = part_is_locked;
+		slave->_is_locked = part_is_locked;
 	if (master->_block_isreserved)
-		slave->mtd._block_isreserved = part_block_isreserved;
+		slave->_block_isreserved = part_block_isreserved;
 	if (master->_block_isbad)
-		slave->mtd._block_isbad = part_block_isbad;
+		slave->_block_isbad = part_block_isbad;
 	if (master->_block_markbad)
-		slave->mtd._block_markbad = part_block_markbad;
-	slave->mtd._erase = part_erase;
-	slave->master = master;
+		slave->_block_markbad = part_block_markbad;
+	slave->_erase = part_erase;
+	slave->parent = master;
 	slave->offset = part->offset;
+	INIT_LIST_HEAD(&slave->partitions);
+	INIT_LIST_HEAD(&slave->node);
 
 	if (slave->offset == MTDPART_OFS_APPEND)
 		slave->offset = cur_offset;
@@ -489,41 +670,41 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
 	}
 	if (slave->offset == MTDPART_OFS_RETAIN) {
 		slave->offset = cur_offset;
-		if (master->size - slave->offset >= slave->mtd.size) {
-			slave->mtd.size = master->size - slave->offset
-							- slave->mtd.size;
+		if (master->size - slave->offset >= slave->size) {
+			slave->size = master->size - slave->offset
+							- slave->size;
 		} else {
 			debug("mtd partition \"%s\" doesn't have enough space: %#llx < %#llx, disabled\n",
 				part->name, master->size - slave->offset,
-				slave->mtd.size);
+				slave->size);
 			/* register to preserve ordering */
 			goto out_register;
 		}
 	}
-	if (slave->mtd.size == MTDPART_SIZ_FULL)
-		slave->mtd.size = master->size - slave->offset;
+	if (slave->size == MTDPART_SIZ_FULL)
+		slave->size = master->size - slave->offset;
 
 	debug("0x%012llx-0x%012llx : \"%s\"\n", (unsigned long long)slave->offset,
-		(unsigned long long)(slave->offset + slave->mtd.size), slave->mtd.name);
+		(unsigned long long)(slave->offset + slave->size), slave->name);
 
 	/* let's do some sanity checks */
 	if (slave->offset >= master->size) {
 		/* let's register it anyway to preserve ordering */
 		slave->offset = 0;
-		slave->mtd.size = 0;
+		slave->size = 0;
 		printk(KERN_ERR"mtd: partition \"%s\" is out of reach -- disabled\n",
 			part->name);
 		goto out_register;
 	}
-	if (slave->offset + slave->mtd.size > master->size) {
-		slave->mtd.size = master->size - slave->offset;
+	if (slave->offset + slave->size > master->size) {
+		slave->size = master->size - slave->offset;
 		printk(KERN_WARNING"mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#llx\n",
-			part->name, master->name, (unsigned long long)slave->mtd.size);
+		       part->name, master->name, slave->size);
 	}
 	if (master->numeraseregions > 1) {
 		/* Deal with variable erase size stuff */
 		int i, max = master->numeraseregions;
-		u64 end = slave->offset + slave->mtd.size;
+		u64 end = slave->offset + slave->size;
 		struct mtd_erase_region_info *regions = master->eraseregions;
 
 		/* Find the first erase regions which is part of this
@@ -536,44 +717,43 @@ static struct mtd_part *allocate_partition(struct mtd_info *master,
 
 		/* Pick biggest erasesize */
 		for (; i < max && regions[i].offset < end; i++) {
-			if (slave->mtd.erasesize < regions[i].erasesize) {
-				slave->mtd.erasesize = regions[i].erasesize;
-			}
+			if (slave->erasesize < regions[i].erasesize)
+				slave->erasesize = regions[i].erasesize;
 		}
-		BUG_ON(slave->mtd.erasesize == 0);
+		WARN_ON(slave->erasesize == 0);
 	} else {
 		/* Single erase size */
-		slave->mtd.erasesize = master->erasesize;
+		slave->erasesize = master->erasesize;
 	}
 
-	if ((slave->mtd.flags & MTD_WRITEABLE) &&
-	    mtd_mod_by_eb(slave->offset, &slave->mtd)) {
+	if ((slave->flags & MTD_WRITEABLE) &&
+	    mtd_mod_by_eb(slave->offset, slave)) {
 		/* Doesn't start on a boundary of major erase size */
 		/* FIXME: Let it be writable if it is on a boundary of
 		 * _minor_ erase size though */
-		slave->mtd.flags &= ~MTD_WRITEABLE;
+		slave->flags &= ~MTD_WRITEABLE;
 		printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase block boundary -- force read-only\n",
 			part->name);
 	}
-	if ((slave->mtd.flags & MTD_WRITEABLE) &&
-	    mtd_mod_by_eb(slave->mtd.size, &slave->mtd)) {
-		slave->mtd.flags &= ~MTD_WRITEABLE;
+	if ((slave->flags & MTD_WRITEABLE) &&
+	    mtd_mod_by_eb(slave->size, slave)) {
+		slave->flags &= ~MTD_WRITEABLE;
 		printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase block -- force read-only\n",
 			part->name);
 	}
 
-	slave->mtd.ecclayout = master->ecclayout;
-	slave->mtd.ecc_step_size = master->ecc_step_size;
-	slave->mtd.ecc_strength = master->ecc_strength;
-	slave->mtd.bitflip_threshold = master->bitflip_threshold;
+	slave->ecclayout = master->ecclayout;
+	slave->ecc_step_size = master->ecc_step_size;
+	slave->ecc_strength = master->ecc_strength;
+	slave->bitflip_threshold = master->bitflip_threshold;
 
 	if (master->_block_isbad) {
 		uint64_t offs = 0;
 
-		while (offs < slave->mtd.size) {
+		while (offs < slave->size) {
 			if (mtd_block_isbad(master, offs + slave->offset))
-				slave->mtd.ecc_stats.badblocks++;
-			offs += slave->mtd.erasesize;
+				slave->ecc_stats.badblocks++;
+			offs += slave->erasesize;
 		}
 	}
 
@@ -586,7 +766,7 @@ int mtd_add_partition(struct mtd_info *master, const char *name,
 		      long long offset, long long length)
 {
 	struct mtd_partition part;
-	struct mtd_part *p, *new;
+	struct mtd_info *p, *new;
 	uint64_t start, end;
 	int ret = 0;
 
@@ -615,21 +795,20 @@ int mtd_add_partition(struct mtd_info *master, const char *name,
 	end = offset + length;
 
 	mutex_lock(&mtd_partitions_mutex);
-	list_for_each_entry(p, &mtd_partitions, list)
-		if (p->master == master) {
-			if ((start >= p->offset) &&
-			    (start < (p->offset + p->mtd.size)))
-				goto err_inv;
+	list_for_each_entry(p, &master->partitions, node) {
+		if (start >= p->offset &&
+		    (start < (p->offset + p->size)))
+			goto err_inv;
 
-			if ((end >= p->offset) &&
-			    (end < (p->offset + p->mtd.size)))
-				goto err_inv;
-		}
+		if (end >= p->offset &&
+		    (end < (p->offset + p->size)))
+			goto err_inv;
+	}
 
-	list_add(&new->list, &mtd_partitions);
+	list_add_tail(&new->node, &master->partitions);
 	mutex_unlock(&mtd_partitions_mutex);
 
-	add_mtd_device(&new->mtd);
+	add_mtd_device(new);
 
 	return ret;
 err_inv:
@@ -641,18 +820,17 @@ EXPORT_SYMBOL_GPL(mtd_add_partition);
 
 int mtd_del_partition(struct mtd_info *master, int partno)
 {
-	struct mtd_part *slave, *next;
+	struct mtd_info *slave, *next;
 	int ret = -EINVAL;
 
 	mutex_lock(&mtd_partitions_mutex);
-	list_for_each_entry_safe(slave, next, &mtd_partitions, list)
-		if ((slave->master == master) &&
-		    (slave->mtd.index == partno)) {
-			ret = del_mtd_device(&slave->mtd);
+	list_for_each_entry_safe(slave, next, &master->partitions, node)
+		if (slave->index == partno) {
+			ret = del_mtd_device(slave);
 			if (ret < 0)
 				break;
 
-			list_del(&slave->list);
+			list_del(&slave->node);
 			free_partition(slave);
 			break;
 		}
@@ -676,20 +854,10 @@ int add_mtd_partitions(struct mtd_info *master,
 		       const struct mtd_partition *parts,
 		       int nbparts)
 {
-	struct mtd_part *slave;
+	struct mtd_info *slave;
 	uint64_t cur_offset = 0;
 	int i;
 
-#ifdef __UBOOT__
-	/*
-	 * Need to init the list here, since LIST_INIT() does not
-	 * work on platforms where relocation has problems (like MIPS
-	 * & PPC).
-	 */
-	if (mtd_partitions.next == NULL)
-		INIT_LIST_HEAD(&mtd_partitions);
-#endif
-
 	debug("Creating %d MTD partitions on \"%s\":\n", nbparts, master->name);
 
 	for (i = 0; i < nbparts; i++) {
@@ -698,12 +866,12 @@ int add_mtd_partitions(struct mtd_info *master,
 			return PTR_ERR(slave);
 
 		mutex_lock(&mtd_partitions_mutex);
-		list_add(&slave->list, &mtd_partitions);
+		list_add_tail(&slave->node, &master->partitions);
 		mutex_unlock(&mtd_partitions_mutex);
 
-		add_mtd_device(&slave->mtd);
+		add_mtd_device(slave);
 
-		cur_offset = slave->offset + slave->mtd.size;
+		cur_offset = slave->offset + slave->size;
 	}
 
 	return 0;
@@ -806,29 +974,12 @@ int parse_mtd_partitions(struct mtd_info *master, const char *const *types,
 }
 #endif
 
-int mtd_is_partition(const struct mtd_info *mtd)
-{
-	struct mtd_part *part;
-	int ispart = 0;
-
-	mutex_lock(&mtd_partitions_mutex);
-	list_for_each_entry(part, &mtd_partitions, list)
-		if (&part->mtd == mtd) {
-			ispart = 1;
-			break;
-		}
-	mutex_unlock(&mtd_partitions_mutex);
-
-	return ispart;
-}
-EXPORT_SYMBOL_GPL(mtd_is_partition);
-
 /* Returns the size of the entire flash chip */
 uint64_t mtd_get_device_size(const struct mtd_info *mtd)
 {
-	if (!mtd_is_partition(mtd))
-		return mtd->size;
+	if (mtd_is_partition(mtd))
+		return mtd->parent->size;
 
-	return PART(mtd)->master->size;
+	return mtd->size;
 }
 EXPORT_SYMBOL_GPL(mtd_get_device_size);

drivers/mtd/nand/Kconfig

@@ -1,297 +1,6 @@
+config MTD_NAND_CORE
+	tristate
 
-menuconfig NAND
-	bool "NAND Device Support"
-if NAND
+source "drivers/mtd/nand/raw/Kconfig"
 
-config SYS_NAND_SELF_INIT
-	bool
-	help
-	  This option, if enabled, provides more flexible and linux-like
-	  NAND initialization process.
-
-config NAND_ATMEL
-	bool "Support Atmel NAND controller"
-	imply SYS_NAND_USE_FLASH_BBT
-	help
-	  Enable this driver for NAND flash platforms using an Atmel NAND
-	  controller.
-
-config NAND_DAVINCI
-	bool "Support TI Davinci NAND controller"
-	help
-	  Enable this driver for NAND flash controllers available in TI Davinci
-	  and Keystone2 platforms
-
-config NAND_DENALI
-	bool
-	select SYS_NAND_SELF_INIT
-	imply CMD_NAND
-
-config NAND_DENALI_DT
-	bool "Support Denali NAND controller as a DT device"
-	select NAND_DENALI
-	depends on OF_CONTROL && DM
-	help
-	  Enable the driver for NAND flash on platforms using a Denali NAND
-	  controller as a DT device.
-
-config NAND_DENALI_SPARE_AREA_SKIP_BYTES
-	int "Number of bytes skipped in OOB area"
-	depends on NAND_DENALI
-	range 0 63
-	help
-	  This option specifies the number of bytes to skip from the beginning
-	  of OOB area before last ECC sector data starts.  This is potentially
-	  used to preserve the bad block marker in the OOB area.
-
-config NAND_LPC32XX_SLC
-	bool "Support LPC32XX_SLC controller"
-	help
-	  Enable the LPC32XX SLC NAND controller.
-
-config NAND_OMAP_GPMC
-	bool "Support OMAP GPMC NAND controller"
-	depends on ARCH_OMAP2PLUS
-	help
-	  Enables omap_gpmc.c driver for OMAPx and AMxxxx platforms.
-	  GPMC controller is used for parallel NAND flash devices, and can
-	  do ECC calculation (not ECC error detection) for HAM1, BCH4, BCH8
-	  and BCH16 ECC algorithms.
-
-config NAND_OMAP_GPMC_PREFETCH
-	bool "Enable GPMC Prefetch"
-	depends on NAND_OMAP_GPMC
-	default y
-	help
-	  On OMAP platforms that use the GPMC controller
-	  (CONFIG_NAND_OMAP_GPMC_PREFETCH), this options enables the code that
-	  uses the prefetch mode to speed up read operations.
-
-config NAND_OMAP_ELM
-	bool "Enable ELM driver for OMAPxx and AMxx platforms."
-	depends on NAND_OMAP_GPMC && !OMAP34XX
-	help
-	  ELM controller is used for ECC error detection (not ECC calculation)
-	  of BCH4, BCH8 and BCH16 ECC algorithms.
-	  Some legacy platforms like OMAP3xx do not have in-built ELM h/w engine,
-	  thus such SoC platforms need to depend on software library for ECC error
-	  detection. However ECC calculation on such plaforms would still be
-	  done by GPMC controller.
-
-config NAND_VF610_NFC
-	bool "Support for Freescale NFC for VF610"
-	select SYS_NAND_SELF_INIT
-	imply CMD_NAND
-	help
-	  Enables support for NAND Flash Controller on some Freescale
-	  processors like the VF610, MCF54418 or Kinetis K70.
-	  The driver supports a maximum 2k page size. The driver
-	  currently does not support hardware ECC.
-
-choice
-	prompt "Hardware ECC strength"
-	depends on NAND_VF610_NFC
-	default SYS_NAND_VF610_NFC_45_ECC_BYTES
-	help
-	  Select the ECC strength used in the hardware BCH ECC block.
-
-config SYS_NAND_VF610_NFC_45_ECC_BYTES
-	bool "24-error correction (45 ECC bytes)"
-
-config SYS_NAND_VF610_NFC_60_ECC_BYTES
-	bool "32-error correction (60 ECC bytes)"
-
-endchoice
-
-config NAND_PXA3XX
-	bool "Support for NAND on PXA3xx and Armada 370/XP/38x"
-	select SYS_NAND_SELF_INIT
-	imply CMD_NAND
-	help
-	  This enables the driver for the NAND flash device found on
-	  PXA3xx processors (NFCv1) and also on Armada 370/XP (NFCv2).
-
-config NAND_SUNXI
-	bool "Support for NAND on Allwinner SoCs"
-	default ARCH_SUNXI
-	depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUN8I
-	select SYS_NAND_SELF_INIT
-	select SYS_NAND_U_BOOT_LOCATIONS
-	select SPL_NAND_SUPPORT
-	imply CMD_NAND
-	---help---
-	Enable support for NAND. This option enables the standard and
-	SPL drivers.
-	The SPL driver only supports reading from the NAND using DMA
-	transfers.
-
-if NAND_SUNXI
-
-config NAND_SUNXI_SPL_ECC_STRENGTH
-	int "Allwinner NAND SPL ECC Strength"
-	default 64
-
-config NAND_SUNXI_SPL_ECC_SIZE
-	int "Allwinner NAND SPL ECC Step Size"
-	default 1024
-
-config NAND_SUNXI_SPL_USABLE_PAGE_SIZE
-	int "Allwinner NAND SPL Usable Page Size"
-	default 1024
-
-endif
-
-config NAND_ARASAN
-	bool "Configure Arasan Nand"
-	select SYS_NAND_SELF_INIT
-	imply CMD_NAND
-	help
-	  This enables Nand driver support for Arasan nand flash
-	  controller. This uses the hardware ECC for read and
-	  write operations.
-
-config NAND_MXC
-	bool "MXC NAND support"
-	depends on CPU_ARM926EJS || CPU_ARM1136 || MX5
-	imply CMD_NAND
-	help
-	  This enables the NAND driver for the NAND flash controller on the
-	  i.MX27 / i.MX31 / i.MX5 rocessors.
-
-config NAND_MXS
-	bool "MXS NAND support"
-	depends on MX23 || MX28 || MX6 || MX7
-	select SYS_NAND_SELF_INIT
-	imply CMD_NAND
-	select APBH_DMA
-	select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7
-	select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7
-	help
-	  This enables NAND driver for the NAND flash controller on the
-	  MXS processors.
-
-if NAND_MXS
-
-config NAND_MXS_DT
-	bool "Support MXS NAND controller as a DT device"
-	depends on OF_CONTROL && MTD
-	help
-	  Enable the driver for MXS NAND flash on platforms using
-	  device tree.
-
-config NAND_MXS_USE_MINIMUM_ECC
-	bool "Use minimum ECC strength supported by the controller"
-	default false
-
-endif
-
-config NAND_ZYNQ
-	bool "Support for Zynq Nand controller"
-	select SYS_NAND_SELF_INIT
-	imply CMD_NAND
-	help
-	  This enables Nand driver support for Nand flash controller
-	  found on Zynq SoC.
-
-config NAND_ZYNQ_USE_BOOTLOADER1_TIMINGS
-	bool "Enable use of 1st stage bootloader timing for NAND"
-	depends on NAND_ZYNQ
-	help
-	  This flag prevent U-boot reconfigure NAND flash controller and reuse
-	  the NAND timing from 1st stage bootloader.
-
-comment "Generic NAND options"
-
-config SYS_NAND_BLOCK_SIZE
-	hex "NAND chip eraseblock size"
-	depends on ARCH_SUNXI
-	help
-	  Number of data bytes in one eraseblock for the NAND chip on the
-	  board. This is the multiple of NAND_PAGE_SIZE and the number of
-	  pages.
-
-config SYS_NAND_PAGE_SIZE
-	hex "NAND chip page size"
-	depends on ARCH_SUNXI
-	help
-	  Number of data bytes in one page for the NAND chip on the
-	  board, not including the OOB area.
-
-config SYS_NAND_OOBSIZE
-	hex "NAND chip OOB size"
-	depends on ARCH_SUNXI
-	help
-	  Number of bytes in the Out-Of-Band area for the NAND chip on
-	  the board.
-
-# Enhance depends when converting drivers to Kconfig which use this config
-# option (mxc_nand, ndfc, omap_gpmc).
-config SYS_NAND_BUSWIDTH_16BIT
-	bool "Use 16-bit NAND interface"
-	depends on NAND_VF610_NFC || NAND_OMAP_GPMC || NAND_MXC || ARCH_DAVINCI
-	help
-	  Indicates that NAND device has 16-bit wide data-bus. In absence of this
-	  config, bus-width of NAND device is assumed to be either 8-bit and later
-	  determined by reading ONFI params.
-	  Above config is useful when NAND device's bus-width information cannot
-	  be determined from on-chip ONFI params, like in following scenarios:
-	  - SPL boot does not support reading of ONFI parameters. This is done to
-	    keep SPL code foot-print small.
-	  - In current U-Boot flow using nand_init(), driver initialization
-	    happens in board_nand_init() which is called before any device probe
-	    (nand_scan_ident + nand_scan_tail), thus device's ONFI parameters are
-	    not available while configuring controller. So a static CONFIG_NAND_xx
-	    is needed to know the device's bus-width in advance.
-
-if SPL
-
-config SYS_NAND_U_BOOT_LOCATIONS
-	bool "Define U-boot binaries locations in NAND"
-	help
-	Enable CONFIG_SYS_NAND_U_BOOT_OFFS though Kconfig.
-	This option should not be enabled when compiling U-boot for boards
-	defining CONFIG_SYS_NAND_U_BOOT_OFFS in their include/configs/<board>.h
-	file.
-
-config SYS_NAND_U_BOOT_OFFS
-	hex "Location in NAND to read U-Boot from"
-	default 0x800000 if NAND_SUNXI
-	depends on SYS_NAND_U_BOOT_LOCATIONS
-	help
-	Set the offset from the start of the nand where u-boot should be
-	loaded from.
-
-config SYS_NAND_U_BOOT_OFFS_REDUND
-	hex "Location in NAND to read U-Boot from"
-	default SYS_NAND_U_BOOT_OFFS
-	depends on SYS_NAND_U_BOOT_LOCATIONS
-	help
-	Set the offset from the start of the nand where the redundant u-boot
-	should be loaded from.
-
-config SPL_NAND_AM33XX_BCH
-	bool "Enables SPL-NAND driver which supports ELM based"
-	depends on NAND_OMAP_GPMC && !OMAP34XX
-	default y
-        help
-	  Hardware ECC correction. This is useful for platforms which have ELM
-	  hardware engine and use NAND boot mode.
-	  Some legacy platforms like OMAP3xx do not have in-built ELM h/w engine,
-	  so those platforms should use CONFIG_SPL_NAND_SIMPLE for enabling
-          SPL-NAND driver with software ECC correction support.
-
-config SPL_NAND_DENALI
-	bool "Support Denali NAND controller for SPL"
-	help
-	  This is a small implementation of the Denali NAND controller
-	  for use on SPL.
-
-config SPL_NAND_SIMPLE
-	bool "Use simple SPL NAND driver"
-	depends on !SPL_NAND_AM33XX_BCH
-	help
-	  Support for NAND boot using simple NAND drivers that
-	  expose the cmd_ctrl() interface.
-endif
-
-endif   # if NAND
+source "drivers/mtd/nand/spi/Kconfig"

drivers/mtd/nand/Makefile

@@ -1,77 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0+
-#
-# (C) Copyright 2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
 
-ifdef CONFIG_SPL_BUILD
-
-ifdef CONFIG_SPL_NAND_DRIVERS
-NORMAL_DRIVERS=y
-endif
-
-obj-$(CONFIG_SPL_NAND_AM33XX_BCH) += am335x_spl_bch.o
-obj-$(CONFIG_SPL_NAND_DENALI) += denali_spl.o
-obj-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o
-obj-$(CONFIG_SPL_NAND_LOAD) += nand_spl_load.o
-obj-$(CONFIG_SPL_NAND_ECC) += nand_ecc.o
-obj-$(CONFIG_SPL_NAND_BASE) += nand_base.o
-obj-$(CONFIG_SPL_NAND_IDENT) += nand_ids.o nand_timings.o
-obj-$(CONFIG_SPL_NAND_INIT) += nand.o
-ifeq ($(CONFIG_SPL_ENV_SUPPORT),y)
-obj-$(CONFIG_ENV_IS_IN_NAND) += nand_util.o
-endif
-
-else # not spl
-
-NORMAL_DRIVERS=y
-
-obj-y += nand.o
-obj-y += nand_bbt.o
-obj-y += nand_ids.o
-obj-y += nand_util.o
-obj-y += nand_ecc.o
-obj-y += nand_base.o
-obj-y += nand_timings.o
-
-endif # not spl
-
-ifdef NORMAL_DRIVERS
-
-obj-$(CONFIG_NAND_ECC_BCH) += nand_bch.o
-
-obj-$(CONFIG_NAND_ATMEL) += atmel_nand.o
-obj-$(CONFIG_NAND_ARASAN) += arasan_nfc.o
-obj-$(CONFIG_NAND_DAVINCI) += davinci_nand.o
-obj-$(CONFIG_NAND_DENALI) += denali.o
-obj-$(CONFIG_NAND_DENALI_DT) += denali_dt.o
-obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o
-obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_nand.o
-obj-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o
-obj-$(CONFIG_NAND_FSMC) += fsmc_nand.o
-obj-$(CONFIG_NAND_KB9202) += kb9202_nand.o
-obj-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o
-obj-$(CONFIG_NAND_KMETER1) += kmeter1_nand.o
-obj-$(CONFIG_NAND_LPC32XX_MLC) += lpc32xx_nand_mlc.o
-obj-$(CONFIG_NAND_LPC32XX_SLC) += lpc32xx_nand_slc.o
-obj-$(CONFIG_NAND_VF610_NFC) += vf610_nfc.o
-obj-$(CONFIG_NAND_MXC) += mxc_nand.o
-obj-$(CONFIG_NAND_MXS) += mxs_nand.o
-obj-$(CONFIG_NAND_MXS_DT) += mxs_nand_dt.o
-obj-$(CONFIG_NAND_PXA3XX) += pxa3xx_nand.o
-obj-$(CONFIG_NAND_SPEAR) += spr_nand.o
-obj-$(CONFIG_TEGRA_NAND) += tegra_nand.o
-obj-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o
-obj-$(CONFIG_NAND_OMAP_ELM) += omap_elm.o
-obj-$(CONFIG_NAND_PLAT) += nand_plat.o
-obj-$(CONFIG_NAND_SUNXI) += sunxi_nand.o
-obj-$(CONFIG_NAND_ZYNQ) += zynq_nand.o
-
-else  # minimal SPL drivers
-
-obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_spl.o
-obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_spl.o
-obj-$(CONFIG_NAND_MXC) += mxc_nand_spl.o
-obj-$(CONFIG_NAND_MXS) += mxs_nand_spl.o mxs_nand.o
-obj-$(CONFIG_NAND_SUNXI) += sunxi_nand_spl.o
-
-endif # drivers
+nandcore-objs := core.o bbt.o
+obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o
+obj-$(CONFIG_MTD_SPI_NAND) += spi/

drivers/mtd/nand/bbt.c

@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017 Free Electrons
+ *
+ * Authors:
+ *	Boris Brezillon <boris.brezillon@free-electrons.com>
+ *	Peter Pan <peterpandong@micron.com>
+ */
+
+#define pr_fmt(fmt)	"nand-bbt: " fmt
+
+#include <linux/mtd/nand.h>
+#ifndef __UBOOT__
+#include <linux/slab.h>
+#endif
+
+/**
+ * nanddev_bbt_init() - Initialize the BBT (Bad Block Table)
+ * @nand: NAND device
+ *
+ * Initialize the in-memory BBT.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int nanddev_bbt_init(struct nand_device *nand)
+{
+	unsigned int bits_per_block = fls(NAND_BBT_BLOCK_NUM_STATUS);
+	unsigned int nblocks = nanddev_neraseblocks(nand);
+	unsigned int nwords = DIV_ROUND_UP(nblocks * bits_per_block,
+					   BITS_PER_LONG);
+
+	nand->bbt.cache = kzalloc(nwords, GFP_KERNEL);
+	if (!nand->bbt.cache)
+		return -ENOMEM;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(nanddev_bbt_init);
+
+/**
+ * nanddev_bbt_cleanup() - Cleanup the BBT (Bad Block Table)
+ * @nand: NAND device
+ *
+ * Undoes what has been done in nanddev_bbt_init()
+ */
+void nanddev_bbt_cleanup(struct nand_device *nand)
+{
+	kfree(nand->bbt.cache);
+}
+EXPORT_SYMBOL_GPL(nanddev_bbt_cleanup);
+
+/**
+ * nanddev_bbt_update() - Update a BBT
+ * @nand: nand device
+ *
+ * Update the BBT. Currently a NOP function since on-flash bbt is not yet
+ * supported.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int nanddev_bbt_update(struct nand_device *nand)
+{
+	return 0;
+}
+EXPORT_SYMBOL_GPL(nanddev_bbt_update);
+
+/**
+ * nanddev_bbt_get_block_status() - Return the status of an eraseblock
+ * @nand: nand device
+ * @entry: the BBT entry
+ *
+ * Return: a positive number nand_bbt_block_status status or -%ERANGE if @entry
+ *	   is bigger than the BBT size.
+ */
+int nanddev_bbt_get_block_status(const struct nand_device *nand,
+				 unsigned int entry)
+{
+	unsigned int bits_per_block = fls(NAND_BBT_BLOCK_NUM_STATUS);
+	unsigned long *pos = nand->bbt.cache +
+			     ((entry * bits_per_block) / BITS_PER_LONG);
+	unsigned int offs = (entry * bits_per_block) % BITS_PER_LONG;
+	unsigned long status;
+
+	if (entry >= nanddev_neraseblocks(nand))
+		return -ERANGE;
+
+	status = pos[0] >> offs;
+	if (bits_per_block + offs > BITS_PER_LONG)
+		status |= pos[1] << (BITS_PER_LONG - offs);
+
+	return status & GENMASK(bits_per_block - 1, 0);
+}
+EXPORT_SYMBOL_GPL(nanddev_bbt_get_block_status);
+
+/**
+ * nanddev_bbt_set_block_status() - Update the status of an eraseblock in the
+ *				    in-memory BBT
+ * @nand: nand device
+ * @entry: the BBT entry to update
+ * @status: the new status
+ *
+ * Update an entry of the in-memory BBT. If you want to push the updated BBT
+ * the NAND you should call nanddev_bbt_update().
+ *
+ * Return: 0 in case of success or -%ERANGE if @entry is bigger than the BBT
+ *	   size.
+ */
+int nanddev_bbt_set_block_status(struct nand_device *nand, unsigned int entry,
+				 enum nand_bbt_block_status status)
+{
+	unsigned int bits_per_block = fls(NAND_BBT_BLOCK_NUM_STATUS);
+	unsigned long *pos = nand->bbt.cache +
+			     ((entry * bits_per_block) / BITS_PER_LONG);
+	unsigned int offs = (entry * bits_per_block) % BITS_PER_LONG;
+	unsigned long val = status & GENMASK(bits_per_block - 1, 0);
+
+	if (entry >= nanddev_neraseblocks(nand))
+		return -ERANGE;
+
+	pos[0] &= ~GENMASK(offs + bits_per_block - 1, offs);
+	pos[0] |= val << offs;
+
+	if (bits_per_block + offs > BITS_PER_LONG) {
+		unsigned int rbits = bits_per_block + offs - BITS_PER_LONG;
+
+		pos[1] &= ~GENMASK(rbits - 1, 0);
+		pos[1] |= val >> rbits;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(nanddev_bbt_set_block_status);

drivers/mtd/nand/core.c

@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017 Free Electrons
+ *
+ * Authors:
+ *	Boris Brezillon <boris.brezillon@free-electrons.com>
+ *	Peter Pan <peterpandong@micron.com>
+ */
+
+#define pr_fmt(fmt)	"nand: " fmt
+
+#ifndef __UBOOT__
+#include <linux/module.h>
+#endif
+#include <linux/mtd/nand.h>
+
+/**
+ * nanddev_isbad() - Check if a block is bad
+ * @nand: NAND device
+ * @pos: position pointing to the block we want to check
+ *
+ * Return: true if the block is bad, false otherwise.
+ */
+bool nanddev_isbad(struct nand_device *nand, const struct nand_pos *pos)
+{
+	if (nanddev_bbt_is_initialized(nand)) {
+		unsigned int entry;
+		int status;
+
+		entry = nanddev_bbt_pos_to_entry(nand, pos);
+		status = nanddev_bbt_get_block_status(nand, entry);
+		/* Lazy block status retrieval */
+		if (status == NAND_BBT_BLOCK_STATUS_UNKNOWN) {
+			if (nand->ops->isbad(nand, pos))
+				status = NAND_BBT_BLOCK_FACTORY_BAD;
+			else
+				status = NAND_BBT_BLOCK_GOOD;
+
+			nanddev_bbt_set_block_status(nand, entry, status);
+		}
+
+		if (status == NAND_BBT_BLOCK_WORN ||
+		    status == NAND_BBT_BLOCK_FACTORY_BAD)
+			return true;
+
+		return false;
+	}
+
+	return nand->ops->isbad(nand, pos);
+}
+EXPORT_SYMBOL_GPL(nanddev_isbad);
+
+/**
+ * nanddev_markbad() - Mark a block as bad
+ * @nand: NAND device
+ * @pos: position of the block to mark bad
+ *
+ * Mark a block bad. This function is updating the BBT if available and
+ * calls the low-level markbad hook (nand->ops->markbad()).
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int nanddev_markbad(struct nand_device *nand, const struct nand_pos *pos)
+{
+	struct mtd_info *mtd = nanddev_to_mtd(nand);
+	unsigned int entry;
+	int ret = 0;
+
+	if (nanddev_isbad(nand, pos))
+		return 0;
+
+	ret = nand->ops->markbad(nand, pos);
+	if (ret)
+		pr_warn("failed to write BBM to block @%llx (err = %d)\n",
+			nanddev_pos_to_offs(nand, pos), ret);
+
+	if (!nanddev_bbt_is_initialized(nand))
+		goto out;
+
+	entry = nanddev_bbt_pos_to_entry(nand, pos);
+	ret = nanddev_bbt_set_block_status(nand, entry, NAND_BBT_BLOCK_WORN);
+	if (ret)
+		goto out;
+
+	ret = nanddev_bbt_update(nand);
+
+out:
+	if (!ret)
+		mtd->ecc_stats.badblocks++;
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(nanddev_markbad);
+
+/**
+ * nanddev_isreserved() - Check whether an eraseblock is reserved or not
+ * @nand: NAND device
+ * @pos: NAND position to test
+ *
+ * Checks whether the eraseblock pointed by @pos is reserved or not.
+ *
+ * Return: true if the eraseblock is reserved, false otherwise.
+ */
+bool nanddev_isreserved(struct nand_device *nand, const struct nand_pos *pos)
+{
+	unsigned int entry;
+	int status;
+
+	if (!nanddev_bbt_is_initialized(nand))
+		return false;
+
+	/* Return info from the table */
+	entry = nanddev_bbt_pos_to_entry(nand, pos);
+	status = nanddev_bbt_get_block_status(nand, entry);
+	return status == NAND_BBT_BLOCK_RESERVED;
+}
+EXPORT_SYMBOL_GPL(nanddev_isreserved);
+
+/**
+ * nanddev_erase() - Erase a NAND portion
+ * @nand: NAND device
+ * @pos: position of the block to erase
+ *
+ * Erases the block if it's not bad.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int nanddev_erase(struct nand_device *nand, const struct nand_pos *pos)
+{
+	if (nanddev_isbad(nand, pos) || nanddev_isreserved(nand, pos)) {
+		pr_warn("attempt to erase a bad/reserved block @%llx\n",
+			nanddev_pos_to_offs(nand, pos));
+		return -EIO;
+	}
+
+	return nand->ops->erase(nand, pos);
+}
+EXPORT_SYMBOL_GPL(nanddev_erase);
+
+/**
+ * nanddev_mtd_erase() - Generic mtd->_erase() implementation for NAND devices
+ * @mtd: MTD device
+ * @einfo: erase request
+ *
+ * This is a simple mtd->_erase() implementation iterating over all blocks
+ * concerned by @einfo and calling nand->ops->erase() on each of them.
+ *
+ * Note that mtd->_erase should not be directly assigned to this helper,
+ * because there's no locking here. NAND specialized layers should instead
+ * implement there own wrapper around nanddev_mtd_erase() taking the
+ * appropriate lock before calling nanddev_mtd_erase().
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int nanddev_mtd_erase(struct mtd_info *mtd, struct erase_info *einfo)
+{
+	struct nand_device *nand = mtd_to_nanddev(mtd);
+	struct nand_pos pos, last;
+	int ret;
+
+	nanddev_offs_to_pos(nand, einfo->addr, &pos);
+	nanddev_offs_to_pos(nand, einfo->addr + einfo->len - 1, &last);
+	while (nanddev_pos_cmp(&pos, &last) <= 0) {
+		ret = nanddev_erase(nand, &pos);
+		if (ret) {
+			einfo->fail_addr = nanddev_pos_to_offs(nand, &pos);
+
+			return ret;
+		}
+
+		nanddev_pos_next_eraseblock(nand, &pos);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(nanddev_mtd_erase);
+
+/**
+ * nanddev_init() - Initialize a NAND device
+ * @nand: NAND device
+ * @ops: NAND device operations
+ * @owner: NAND device owner
+ *
+ * Initializes a NAND device object. Consistency checks are done on @ops and
+ * @nand->memorg. Also takes care of initializing the BBT.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int nanddev_init(struct nand_device *nand, const struct nand_ops *ops,
+		 struct module *owner)
+{
+	struct mtd_info *mtd = nanddev_to_mtd(nand);
+	struct nand_memory_organization *memorg = nanddev_get_memorg(nand);
+
+	if (!nand || !ops)
+		return -EINVAL;
+
+	if (!ops->erase || !ops->markbad || !ops->isbad)
+		return -EINVAL;
+
+	if (!memorg->bits_per_cell || !memorg->pagesize ||
+	    !memorg->pages_per_eraseblock || !memorg->eraseblocks_per_lun ||
+	    !memorg->planes_per_lun || !memorg->luns_per_target ||
+	    !memorg->ntargets)
+		return -EINVAL;
+
+	nand->rowconv.eraseblock_addr_shift =
+					fls(memorg->pages_per_eraseblock - 1);
+	nand->rowconv.lun_addr_shift = fls(memorg->eraseblocks_per_lun - 1) +
+				       nand->rowconv.eraseblock_addr_shift;
+
+	nand->ops = ops;
+
+	mtd->type = memorg->bits_per_cell == 1 ?
+		    MTD_NANDFLASH : MTD_MLCNANDFLASH;
+	mtd->flags = MTD_CAP_NANDFLASH;
+	mtd->erasesize = memorg->pagesize * memorg->pages_per_eraseblock;
+	mtd->writesize = memorg->pagesize;
+	mtd->writebufsize = memorg->pagesize;
+	mtd->oobsize = memorg->oobsize;
+	mtd->size = nanddev_size(nand);
+	mtd->owner = owner;
+
+	return nanddev_bbt_init(nand);
+}
+EXPORT_SYMBOL_GPL(nanddev_init);
+
+/**
+ * nanddev_cleanup() - Release resources allocated in nanddev_init()
+ * @nand: NAND device
+ *
+ * Basically undoes what has been done in nanddev_init().
+ */
+void nanddev_cleanup(struct nand_device *nand)
+{
+	if (nanddev_bbt_is_initialized(nand))
+		nanddev_bbt_cleanup(nand);
+}
+EXPORT_SYMBOL_GPL(nanddev_cleanup);
+
+MODULE_DESCRIPTION("Generic NAND framework");
+MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com>");
+MODULE_LICENSE("GPL v2");

drivers/mtd/nand/raw/Kconfig

@@ -0,0 +1,297 @@
+
+menuconfig NAND
+	bool "Raw NAND Device Support"
+if NAND
+
+config SYS_NAND_SELF_INIT
+	bool
+	help
+	  This option, if enabled, provides more flexible and linux-like
+	  NAND initialization process.
+
+config NAND_ATMEL
+	bool "Support Atmel NAND controller"
+	imply SYS_NAND_USE_FLASH_BBT
+	help
+	  Enable this driver for NAND flash platforms using an Atmel NAND
+	  controller.
+
+config NAND_DAVINCI
+	bool "Support TI Davinci NAND controller"
+	help
+	  Enable this driver for NAND flash controllers available in TI Davinci
+	  and Keystone2 platforms
+
+config NAND_DENALI
+	bool
+	select SYS_NAND_SELF_INIT
+	imply CMD_NAND
+
+config NAND_DENALI_DT
+	bool "Support Denali NAND controller as a DT device"
+	select NAND_DENALI
+	depends on OF_CONTROL && DM
+	help
+	  Enable the driver for NAND flash on platforms using a Denali NAND
+	  controller as a DT device.
+
+config NAND_DENALI_SPARE_AREA_SKIP_BYTES
+	int "Number of bytes skipped in OOB area"
+	depends on NAND_DENALI
+	range 0 63
+	help
+	  This option specifies the number of bytes to skip from the beginning
+	  of OOB area before last ECC sector data starts.  This is potentially
+	  used to preserve the bad block marker in the OOB area.
+
+config NAND_LPC32XX_SLC
+	bool "Support LPC32XX_SLC controller"
+	help
+	  Enable the LPC32XX SLC NAND controller.
+
+config NAND_OMAP_GPMC
+	bool "Support OMAP GPMC NAND controller"
+	depends on ARCH_OMAP2PLUS
+	help
+	  Enables omap_gpmc.c driver for OMAPx and AMxxxx platforms.
+	  GPMC controller is used for parallel NAND flash devices, and can
+	  do ECC calculation (not ECC error detection) for HAM1, BCH4, BCH8
+	  and BCH16 ECC algorithms.
+
+config NAND_OMAP_GPMC_PREFETCH
+	bool "Enable GPMC Prefetch"
+	depends on NAND_OMAP_GPMC
+	default y
+	help
+	  On OMAP platforms that use the GPMC controller
+	  (CONFIG_NAND_OMAP_GPMC_PREFETCH), this options enables the code that
+	  uses the prefetch mode to speed up read operations.
+
+config NAND_OMAP_ELM
+	bool "Enable ELM driver for OMAPxx and AMxx platforms."
+	depends on NAND_OMAP_GPMC && !OMAP34XX
+	help
+	  ELM controller is used for ECC error detection (not ECC calculation)
+	  of BCH4, BCH8 and BCH16 ECC algorithms.
+	  Some legacy platforms like OMAP3xx do not have in-built ELM h/w engine,
+	  thus such SoC platforms need to depend on software library for ECC error
+	  detection. However ECC calculation on such plaforms would still be
+	  done by GPMC controller.
+
+config NAND_VF610_NFC
+	bool "Support for Freescale NFC for VF610"
+	select SYS_NAND_SELF_INIT
+	imply CMD_NAND
+	help
+	  Enables support for NAND Flash Controller on some Freescale
+	  processors like the VF610, MCF54418 or Kinetis K70.
+	  The driver supports a maximum 2k page size. The driver
+	  currently does not support hardware ECC.
+
+choice
+	prompt "Hardware ECC strength"
+	depends on NAND_VF610_NFC
+	default SYS_NAND_VF610_NFC_45_ECC_BYTES
+	help
+	  Select the ECC strength used in the hardware BCH ECC block.
+
+config SYS_NAND_VF610_NFC_45_ECC_BYTES
+	bool "24-error correction (45 ECC bytes)"
+
+config SYS_NAND_VF610_NFC_60_ECC_BYTES
+	bool "32-error correction (60 ECC bytes)"
+
+endchoice
+
+config NAND_PXA3XX
+	bool "Support for NAND on PXA3xx and Armada 370/XP/38x"
+	select SYS_NAND_SELF_INIT
+	imply CMD_NAND
+	help
+	  This enables the driver for the NAND flash device found on
+	  PXA3xx processors (NFCv1) and also on Armada 370/XP (NFCv2).
+
+config NAND_SUNXI
+	bool "Support for NAND on Allwinner SoCs"
+	default ARCH_SUNXI
+	depends on MACH_SUN4I || MACH_SUN5I || MACH_SUN7I || MACH_SUN8I
+	select SYS_NAND_SELF_INIT
+	select SYS_NAND_U_BOOT_LOCATIONS
+	select SPL_NAND_SUPPORT
+	imply CMD_NAND
+	---help---
+	Enable support for NAND. This option enables the standard and
+	SPL drivers.
+	The SPL driver only supports reading from the NAND using DMA
+	transfers.
+
+if NAND_SUNXI
+
+config NAND_SUNXI_SPL_ECC_STRENGTH
+	int "Allwinner NAND SPL ECC Strength"
+	default 64
+
+config NAND_SUNXI_SPL_ECC_SIZE
+	int "Allwinner NAND SPL ECC Step Size"
+	default 1024
+
+config NAND_SUNXI_SPL_USABLE_PAGE_SIZE
+	int "Allwinner NAND SPL Usable Page Size"
+	default 1024
+
+endif
+
+config NAND_ARASAN
+	bool "Configure Arasan Nand"
+	select SYS_NAND_SELF_INIT
+	imply CMD_NAND
+	help
+	  This enables Nand driver support for Arasan nand flash
+	  controller. This uses the hardware ECC for read and
+	  write operations.
+
+config NAND_MXC
+	bool "MXC NAND support"
+	depends on CPU_ARM926EJS || CPU_ARM1136 || MX5
+	imply CMD_NAND
+	help
+	  This enables the NAND driver for the NAND flash controller on the
+	  i.MX27 / i.MX31 / i.MX5 rocessors.
+
+config NAND_MXS
+	bool "MXS NAND support"
+	depends on MX23 || MX28 || MX6 || MX7
+	select SYS_NAND_SELF_INIT
+	imply CMD_NAND
+	select APBH_DMA
+	select APBH_DMA_BURST if ARCH_MX6 || ARCH_MX7
+	select APBH_DMA_BURST8 if ARCH_MX6 || ARCH_MX7
+	help
+	  This enables NAND driver for the NAND flash controller on the
+	  MXS processors.
+
+if NAND_MXS
+
+config NAND_MXS_DT
+	bool "Support MXS NAND controller as a DT device"
+	depends on OF_CONTROL && MTD
+	help
+	  Enable the driver for MXS NAND flash on platforms using
+	  device tree.
+
+config NAND_MXS_USE_MINIMUM_ECC
+	bool "Use minimum ECC strength supported by the controller"
+	default false
+
+endif
+
+config NAND_ZYNQ
+	bool "Support for Zynq Nand controller"
+	select SYS_NAND_SELF_INIT
+	imply CMD_NAND
+	help
+	  This enables Nand driver support for Nand flash controller
+	  found on Zynq SoC.
+
+config NAND_ZYNQ_USE_BOOTLOADER1_TIMINGS
+	bool "Enable use of 1st stage bootloader timing for NAND"
+	depends on NAND_ZYNQ
+	help
+	  This flag prevent U-boot reconfigure NAND flash controller and reuse
+	  the NAND timing from 1st stage bootloader.
+
+comment "Generic NAND options"
+
+config SYS_NAND_BLOCK_SIZE
+	hex "NAND chip eraseblock size"
+	depends on ARCH_SUNXI
+	help
+	  Number of data bytes in one eraseblock for the NAND chip on the
+	  board. This is the multiple of NAND_PAGE_SIZE and the number of
+	  pages.
+
+config SYS_NAND_PAGE_SIZE
+	hex "NAND chip page size"
+	depends on ARCH_SUNXI
+	help
+	  Number of data bytes in one page for the NAND chip on the
+	  board, not including the OOB area.
+
+config SYS_NAND_OOBSIZE
+	hex "NAND chip OOB size"
+	depends on ARCH_SUNXI
+	help
+	  Number of bytes in the Out-Of-Band area for the NAND chip on
+	  the board.
+
+# Enhance depends when converting drivers to Kconfig which use this config
+# option (mxc_nand, ndfc, omap_gpmc).
+config SYS_NAND_BUSWIDTH_16BIT
+	bool "Use 16-bit NAND interface"
+	depends on NAND_VF610_NFC || NAND_OMAP_GPMC || NAND_MXC || ARCH_DAVINCI
+	help
+	  Indicates that NAND device has 16-bit wide data-bus. In absence of this
+	  config, bus-width of NAND device is assumed to be either 8-bit and later
+	  determined by reading ONFI params.
+	  Above config is useful when NAND device's bus-width information cannot
+	  be determined from on-chip ONFI params, like in following scenarios:
+	  - SPL boot does not support reading of ONFI parameters. This is done to
+	    keep SPL code foot-print small.
+	  - In current U-Boot flow using nand_init(), driver initialization
+	    happens in board_nand_init() which is called before any device probe
+	    (nand_scan_ident + nand_scan_tail), thus device's ONFI parameters are
+	    not available while configuring controller. So a static CONFIG_NAND_xx
+	    is needed to know the device's bus-width in advance.
+
+if SPL
+
+config SYS_NAND_U_BOOT_LOCATIONS
+	bool "Define U-boot binaries locations in NAND"
+	help
+	Enable CONFIG_SYS_NAND_U_BOOT_OFFS though Kconfig.
+	This option should not be enabled when compiling U-boot for boards
+	defining CONFIG_SYS_NAND_U_BOOT_OFFS in their include/configs/<board>.h
+	file.
+
+config SYS_NAND_U_BOOT_OFFS
+	hex "Location in NAND to read U-Boot from"
+	default 0x800000 if NAND_SUNXI
+	depends on SYS_NAND_U_BOOT_LOCATIONS
+	help
+	Set the offset from the start of the nand where u-boot should be
+	loaded from.
+
+config SYS_NAND_U_BOOT_OFFS_REDUND
+	hex "Location in NAND to read U-Boot from"
+	default SYS_NAND_U_BOOT_OFFS
+	depends on SYS_NAND_U_BOOT_LOCATIONS
+	help
+	Set the offset from the start of the nand where the redundant u-boot
+	should be loaded from.
+
+config SPL_NAND_AM33XX_BCH
+	bool "Enables SPL-NAND driver which supports ELM based"
+	depends on NAND_OMAP_GPMC && !OMAP34XX
+	default y
+        help
+	  Hardware ECC correction. This is useful for platforms which have ELM
+	  hardware engine and use NAND boot mode.
+	  Some legacy platforms like OMAP3xx do not have in-built ELM h/w engine,
+	  so those platforms should use CONFIG_SPL_NAND_SIMPLE for enabling
+          SPL-NAND driver with software ECC correction support.
+
+config SPL_NAND_DENALI
+	bool "Support Denali NAND controller for SPL"
+	help
+	  This is a small implementation of the Denali NAND controller
+	  for use on SPL.
+
+config SPL_NAND_SIMPLE
+	bool "Use simple SPL NAND driver"
+	depends on !SPL_NAND_AM33XX_BCH
+	help
+	  Support for NAND boot using simple NAND drivers that
+	  expose the cmd_ctrl() interface.
+endif
+
+endif   # if NAND

drivers/mtd/nand/raw/Makefile

@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0+
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+
+ifdef CONFIG_SPL_BUILD
+
+ifdef CONFIG_SPL_NAND_DRIVERS
+NORMAL_DRIVERS=y
+endif
+
+obj-$(CONFIG_SPL_NAND_AM33XX_BCH) += am335x_spl_bch.o
+obj-$(CONFIG_SPL_NAND_DENALI) += denali_spl.o
+obj-$(CONFIG_SPL_NAND_SIMPLE) += nand_spl_simple.o
+obj-$(CONFIG_SPL_NAND_LOAD) += nand_spl_load.o
+obj-$(CONFIG_SPL_NAND_ECC) += nand_ecc.o
+obj-$(CONFIG_SPL_NAND_BASE) += nand_base.o
+obj-$(CONFIG_SPL_NAND_IDENT) += nand_ids.o nand_timings.o
+obj-$(CONFIG_SPL_NAND_INIT) += nand.o
+ifeq ($(CONFIG_SPL_ENV_SUPPORT),y)
+obj-$(CONFIG_ENV_IS_IN_NAND) += nand_util.o
+endif
+
+else # not spl
+
+NORMAL_DRIVERS=y
+
+obj-y += nand.o
+obj-y += nand_bbt.o
+obj-y += nand_ids.o
+obj-y += nand_util.o
+obj-y += nand_ecc.o
+obj-y += nand_base.o
+obj-y += nand_timings.o
+
+endif # not spl
+
+ifdef NORMAL_DRIVERS
+
+obj-$(CONFIG_NAND_ECC_BCH) += nand_bch.o
+
+obj-$(CONFIG_NAND_ATMEL) += atmel_nand.o
+obj-$(CONFIG_NAND_ARASAN) += arasan_nfc.o
+obj-$(CONFIG_NAND_DAVINCI) += davinci_nand.o
+obj-$(CONFIG_NAND_DENALI) += denali.o
+obj-$(CONFIG_NAND_DENALI_DT) += denali_dt.o
+obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_nand.o
+obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_nand.o
+obj-$(CONFIG_NAND_FSL_UPM) += fsl_upm.o
+obj-$(CONFIG_NAND_FSMC) += fsmc_nand.o
+obj-$(CONFIG_NAND_KB9202) += kb9202_nand.o
+obj-$(CONFIG_NAND_KIRKWOOD) += kirkwood_nand.o
+obj-$(CONFIG_NAND_KMETER1) += kmeter1_nand.o
+obj-$(CONFIG_NAND_LPC32XX_MLC) += lpc32xx_nand_mlc.o
+obj-$(CONFIG_NAND_LPC32XX_SLC) += lpc32xx_nand_slc.o
+obj-$(CONFIG_NAND_VF610_NFC) += vf610_nfc.o
+obj-$(CONFIG_NAND_MXC) += mxc_nand.o
+obj-$(CONFIG_NAND_MXS) += mxs_nand.o
+obj-$(CONFIG_NAND_MXS_DT) += mxs_nand_dt.o
+obj-$(CONFIG_NAND_PXA3XX) += pxa3xx_nand.o
+obj-$(CONFIG_NAND_SPEAR) += spr_nand.o
+obj-$(CONFIG_TEGRA_NAND) += tegra_nand.o
+obj-$(CONFIG_NAND_OMAP_GPMC) += omap_gpmc.o
+obj-$(CONFIG_NAND_OMAP_ELM) += omap_elm.o
+obj-$(CONFIG_NAND_PLAT) += nand_plat.o
+obj-$(CONFIG_NAND_SUNXI) += sunxi_nand.o
+obj-$(CONFIG_NAND_ZYNQ) += zynq_nand.o
+
+else  # minimal SPL drivers
+
+obj-$(CONFIG_NAND_FSL_ELBC) += fsl_elbc_spl.o
+obj-$(CONFIG_NAND_FSL_IFC) += fsl_ifc_spl.o
+obj-$(CONFIG_NAND_MXC) += mxc_nand_spl.o
+obj-$(CONFIG_NAND_MXS) += mxs_nand_spl.o mxs_nand.o
+obj-$(CONFIG_NAND_SUNXI) += sunxi_nand_spl.o
+
+endif # drivers

drivers/mtd/nand/raw/davinci_nand.c

@@ -9,7 +9,7 @@
 
 /*
  *
- * linux/drivers/mtd/nand/nand_davinci.c
+ * linux/drivers/mtd/nand/raw/nand_davinci.c
  *
  * NAND Flash Driver
  *

drivers/mtd/nand/raw/nand_base.c

@@ -1863,33 +1863,6 @@ read_retry:
 	return max_bitflips;
 }
 
-/**
- * nand_read - [MTD Interface] MTD compatibility function for nand_do_read_ecc
- * @mtd: MTD device structure
- * @from: offset to read from
- * @len: number of bytes to read
- * @retlen: pointer to variable to store the number of read bytes
- * @buf: the databuffer to put data
- *
- * Get hold of the chip and call nand_do_read.
- */
-static int nand_read(struct mtd_info *mtd, loff_t from, size_t len,
-		     size_t *retlen, uint8_t *buf)
-{
-	struct mtd_oob_ops ops;
-	int ret;
-
-	nand_get_device(mtd, FL_READING);
-	memset(&ops, 0, sizeof(ops));
-	ops.len = len;
-	ops.datbuf = buf;
-	ops.mode = MTD_OPS_PLACE_OOB;
-	ret = nand_do_read_ops(mtd, from, &ops);
-	*retlen = ops.retlen;
-	nand_release_device(mtd);
-	return ret;
-}
-
 /**
  * nand_read_oob_std - [REPLACEABLE] the most common OOB data read function
  * @mtd: mtd info structure
@@ -2674,33 +2647,6 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
 	return ret;
 }
 
-/**
- * nand_write - [MTD Interface] NAND write with ECC
- * @mtd: MTD device structure
- * @to: offset to write to
- * @len: number of bytes to write
- * @retlen: pointer to variable to store the number of written bytes
- * @buf: the data to write
- *
- * NAND write with ECC.
- */
-static int nand_write(struct mtd_info *mtd, loff_t to, size_t len,
-			  size_t *retlen, const uint8_t *buf)
-{
-	struct mtd_oob_ops ops;
-	int ret;
-
-	nand_get_device(mtd, FL_WRITING);
-	memset(&ops, 0, sizeof(ops));
-	ops.len = len;
-	ops.datbuf = (uint8_t *)buf;
-	ops.mode = MTD_OPS_PLACE_OOB;
-	ret = nand_do_write_ops(mtd, to, &ops);
-	*retlen = ops.retlen;
-	nand_release_device(mtd);
-	return ret;
-}
-
 /**
  * nand_do_write_oob - [MTD Interface] NAND write out-of-band
  * @mtd: MTD device structure
@@ -4620,8 +4566,6 @@ int nand_scan_tail(struct mtd_info *mtd)
 	mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM :
 						MTD_CAP_NANDFLASH;
 	mtd->_erase = nand_erase;
-	mtd->_read = nand_read;
-	mtd->_write = nand_write;
 	mtd->_panic_write = panic_nand_write;
 	mtd->_read_oob = nand_read_oob;
 	mtd->_write_oob = nand_write_oob;

drivers/mtd/nand/raw/nand_ecc.c

@@ -3,7 +3,7 @@
  * This file contains an ECC algorithm from Toshiba that detects and
  * corrects 1 bit errors in a 256 byte block of data.
  *
- * drivers/mtd/nand/nand_ecc.c
+ * drivers/mtd/nand/raw/nand_ecc.c
  *
  * Copyright (C) 2000-2004 Steven J. Hill (sjhill@realitydiluted.com)
  *                         Toshiba America Electronics Components, Inc.

drivers/mtd/nand/raw/nand_util.c

@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * drivers/mtd/nand/nand_util.c
+ * drivers/mtd/nand/raw/nand_util.c
  *
  * Copyright (C) 2006 by Weiss-Electronic GmbH.
  * All rights reserved.

drivers/mtd/nand/raw/pxa3xx_nand.c

@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 /*
- * drivers/mtd/nand/pxa3xx_nand.c
+ * drivers/mtd/nand/raw/pxa3xx_nand.c
  *
  * Copyright © 2005 Intel Corporation
  * Copyright © 2006 Marvell International Ltd.

drivers/mtd/nand/spi/Kconfig

@@ -0,0 +1,7 @@
+menuconfig MTD_SPI_NAND
+	bool "SPI NAND device Support"
+	depends on MTD && DM_SPI
+	select MTD_NAND_CORE
+	select SPI_MEM
+	help
+	  This is the framework for the SPI NAND device drivers.

drivers/mtd/nand/spi/Makefile

@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+
+spinand-objs := core.o macronix.o micron.o winbond.o
+obj-$(CONFIG_MTD_SPI_NAND) += spinand.o

drivers/mtd/nand/spi/macronix.c

@@ -0,0 +1,146 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2018 Macronix
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#ifndef __UBOOT__
+#include <linux/device.h>
+#include <linux/kernel.h>
+#endif
+#include <linux/mtd/spinand.h>
+
+#define SPINAND_MFR_MACRONIX		0xC2
+
+static SPINAND_OP_VARIANTS(read_cache_variants,
+		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
+
+static SPINAND_OP_VARIANTS(write_cache_variants,
+		SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
+		SPINAND_PROG_LOAD(true, 0, NULL, 0));
+
+static SPINAND_OP_VARIANTS(update_cache_variants,
+		SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
+		SPINAND_PROG_LOAD(false, 0, NULL, 0));
+
+static int mx35lfxge4ab_ooblayout_ecc(struct mtd_info *mtd, int section,
+				      struct mtd_oob_region *region)
+{
+	return -ERANGE;
+}
+
+static int mx35lfxge4ab_ooblayout_free(struct mtd_info *mtd, int section,
+				       struct mtd_oob_region *region)
+{
+	if (section)
+		return -ERANGE;
+
+	region->offset = 2;
+	region->length = mtd->oobsize - 2;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops mx35lfxge4ab_ooblayout = {
+	.ecc = mx35lfxge4ab_ooblayout_ecc,
+	.free = mx35lfxge4ab_ooblayout_free,
+};
+
+static int mx35lf1ge4ab_get_eccsr(struct spinand_device *spinand, u8 *eccsr)
+{
+	struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(0x7c, 1),
+					  SPI_MEM_OP_NO_ADDR,
+					  SPI_MEM_OP_DUMMY(1, 1),
+					  SPI_MEM_OP_DATA_IN(1, eccsr, 1));
+
+	return spi_mem_exec_op(spinand->slave, &op);
+}
+
+static int mx35lf1ge4ab_ecc_get_status(struct spinand_device *spinand,
+				       u8 status)
+{
+	struct nand_device *nand = spinand_to_nand(spinand);
+	u8 eccsr;
+
+	switch (status & STATUS_ECC_MASK) {
+	case STATUS_ECC_NO_BITFLIPS:
+		return 0;
+
+	case STATUS_ECC_UNCOR_ERROR:
+		return -EBADMSG;
+
+	case STATUS_ECC_HAS_BITFLIPS:
+		/*
+		 * Let's try to retrieve the real maximum number of bitflips
+		 * in order to avoid forcing the wear-leveling layer to move
+		 * data around if it's not necessary.
+		 */
+		if (mx35lf1ge4ab_get_eccsr(spinand, &eccsr))
+			return nand->eccreq.strength;
+
+		if (WARN_ON(eccsr > nand->eccreq.strength || !eccsr))
+			return nand->eccreq.strength;
+
+		return eccsr;
+
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static const struct spinand_info macronix_spinand_table[] = {
+	SPINAND_INFO("MX35LF1GE4AB", 0x12,
+		     NAND_MEMORG(1, 2048, 64, 64, 1024, 1, 1, 1),
+		     NAND_ECCREQ(4, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_QE_BIT,
+		     SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
+				     mx35lf1ge4ab_ecc_get_status)),
+	SPINAND_INFO("MX35LF2GE4AB", 0x22,
+		     NAND_MEMORG(1, 2048, 64, 64, 2048, 2, 1, 1),
+		     NAND_ECCREQ(4, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_QE_BIT,
+		     SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, NULL)),
+};
+
+static int macronix_spinand_detect(struct spinand_device *spinand)
+{
+	u8 *id = spinand->id.data;
+	int ret;
+
+	/*
+	 * Macronix SPI NAND read ID needs a dummy byte, so the first byte in
+	 * raw_id is garbage.
+	 */
+	if (id[1] != SPINAND_MFR_MACRONIX)
+		return 0;
+
+	ret = spinand_match_and_init(spinand, macronix_spinand_table,
+				     ARRAY_SIZE(macronix_spinand_table),
+				     id[2]);
+	if (ret)
+		return ret;
+
+	return 1;
+}
+
+static const struct spinand_manufacturer_ops macronix_spinand_manuf_ops = {
+	.detect = macronix_spinand_detect,
+};
+
+const struct spinand_manufacturer macronix_spinand_manufacturer = {
+	.id = SPINAND_MFR_MACRONIX,
+	.name = "Macronix",
+	.ops = &macronix_spinand_manuf_ops,
+};

drivers/mtd/nand/spi/micron.c

@@ -0,0 +1,135 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2016-2017 Micron Technology, Inc.
+ *
+ * Authors:
+ *	Peter Pan <peterpandong@micron.com>
+ */
+
+#ifndef __UBOOT__
+#include <linux/device.h>
+#include <linux/kernel.h>
+#endif
+#include <linux/mtd/spinand.h>
+
+#define SPINAND_MFR_MICRON		0x2c
+
+#define MICRON_STATUS_ECC_MASK		GENMASK(7, 4)
+#define MICRON_STATUS_ECC_NO_BITFLIPS	(0 << 4)
+#define MICRON_STATUS_ECC_1TO3_BITFLIPS	(1 << 4)
+#define MICRON_STATUS_ECC_4TO6_BITFLIPS	(3 << 4)
+#define MICRON_STATUS_ECC_7TO8_BITFLIPS	(5 << 4)
+
+static SPINAND_OP_VARIANTS(read_cache_variants,
+		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
+
+static SPINAND_OP_VARIANTS(write_cache_variants,
+		SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
+		SPINAND_PROG_LOAD(true, 0, NULL, 0));
+
+static SPINAND_OP_VARIANTS(update_cache_variants,
+		SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
+		SPINAND_PROG_LOAD(false, 0, NULL, 0));
+
+static int mt29f2g01abagd_ooblayout_ecc(struct mtd_info *mtd, int section,
+					struct mtd_oob_region *region)
+{
+	if (section)
+		return -ERANGE;
+
+	region->offset = 64;
+	region->length = 64;
+
+	return 0;
+}
+
+static int mt29f2g01abagd_ooblayout_free(struct mtd_info *mtd, int section,
+					 struct mtd_oob_region *region)
+{
+	if (section)
+		return -ERANGE;
+
+	/* Reserve 2 bytes for the BBM. */
+	region->offset = 2;
+	region->length = 62;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops mt29f2g01abagd_ooblayout = {
+	.ecc = mt29f2g01abagd_ooblayout_ecc,
+	.free = mt29f2g01abagd_ooblayout_free,
+};
+
+static int mt29f2g01abagd_ecc_get_status(struct spinand_device *spinand,
+					 u8 status)
+{
+	switch (status & MICRON_STATUS_ECC_MASK) {
+	case STATUS_ECC_NO_BITFLIPS:
+		return 0;
+
+	case STATUS_ECC_UNCOR_ERROR:
+		return -EBADMSG;
+
+	case MICRON_STATUS_ECC_1TO3_BITFLIPS:
+		return 3;
+
+	case MICRON_STATUS_ECC_4TO6_BITFLIPS:
+		return 6;
+
+	case MICRON_STATUS_ECC_7TO8_BITFLIPS:
+		return 8;
+
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static const struct spinand_info micron_spinand_table[] = {
+	SPINAND_INFO("MT29F2G01ABAGD", 0x24,
+		     NAND_MEMORG(1, 2048, 128, 64, 2048, 2, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&mt29f2g01abagd_ooblayout,
+				     mt29f2g01abagd_ecc_get_status)),
+};
+
+static int micron_spinand_detect(struct spinand_device *spinand)
+{
+	u8 *id = spinand->id.data;
+	int ret;
+
+	/*
+	 * Micron SPI NAND read ID need a dummy byte,
+	 * so the first byte in raw_id is dummy.
+	 */
+	if (id[1] != SPINAND_MFR_MICRON)
+		return 0;
+
+	ret = spinand_match_and_init(spinand, micron_spinand_table,
+				     ARRAY_SIZE(micron_spinand_table), id[2]);
+	if (ret)
+		return ret;
+
+	return 1;
+}
+
+static const struct spinand_manufacturer_ops micron_spinand_manuf_ops = {
+	.detect = micron_spinand_detect,
+};
+
+const struct spinand_manufacturer micron_spinand_manufacturer = {
+	.id = SPINAND_MFR_MICRON,
+	.name = "Micron",
+	.ops = &micron_spinand_manuf_ops,
+};

drivers/mtd/nand/spi/winbond.c

@@ -0,0 +1,143 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2017 exceet electronics GmbH
+ *
+ * Authors:
+ *	Frieder Schrempf <frieder.schrempf@exceet.de>
+ *	Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#ifndef __UBOOT__
+#include <linux/device.h>
+#include <linux/kernel.h>
+#endif
+#include <linux/mtd/spinand.h>
+
+#define SPINAND_MFR_WINBOND		0xEF
+
+#define WINBOND_CFG_BUF_READ		BIT(3)
+
+static SPINAND_OP_VARIANTS(read_cache_variants,
+		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP(true, 0, 1, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
+
+static SPINAND_OP_VARIANTS(write_cache_variants,
+		SPINAND_PROG_LOAD_X4(true, 0, NULL, 0),
+		SPINAND_PROG_LOAD(true, 0, NULL, 0));
+
+static SPINAND_OP_VARIANTS(update_cache_variants,
+		SPINAND_PROG_LOAD_X4(false, 0, NULL, 0),
+		SPINAND_PROG_LOAD(false, 0, NULL, 0));
+
+static int w25m02gv_ooblayout_ecc(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *region)
+{
+	if (section > 3)
+		return -ERANGE;
+
+	region->offset = (16 * section) + 8;
+	region->length = 8;
+
+	return 0;
+}
+
+static int w25m02gv_ooblayout_free(struct mtd_info *mtd, int section,
+				   struct mtd_oob_region *region)
+{
+	if (section > 3)
+		return -ERANGE;
+
+	region->offset = (16 * section) + 2;
+	region->length = 6;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops w25m02gv_ooblayout = {
+	.ecc = w25m02gv_ooblayout_ecc,
+	.free = w25m02gv_ooblayout_free,
+};
+
+static int w25m02gv_select_target(struct spinand_device *spinand,
+				  unsigned int target)
+{
+	struct spi_mem_op op = SPI_MEM_OP(SPI_MEM_OP_CMD(0xc2, 1),
+					  SPI_MEM_OP_NO_ADDR,
+					  SPI_MEM_OP_NO_DUMMY,
+					  SPI_MEM_OP_DATA_OUT(1,
+							spinand->scratchbuf,
+							1));
+
+	*spinand->scratchbuf = target;
+	return spi_mem_exec_op(spinand->slave, &op);
+}
+
+static const struct spinand_info winbond_spinand_table[] = {
+	SPINAND_INFO("W25M02GV", 0xAB,
+		     NAND_MEMORG(1, 2048, 64, 64, 1024, 1, 1, 2),
+		     NAND_ECCREQ(1, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0,
+		     SPINAND_ECCINFO(&w25m02gv_ooblayout, NULL),
+		     SPINAND_SELECT_TARGET(w25m02gv_select_target)),
+};
+
+/**
+ * winbond_spinand_detect - initialize device related part in spinand_device
+ * struct if it is a Winbond device.
+ * @spinand: SPI NAND device structure
+ */
+static int winbond_spinand_detect(struct spinand_device *spinand)
+{
+	u8 *id = spinand->id.data;
+	int ret;
+
+	/*
+	 * Winbond SPI NAND read ID need a dummy byte,
+	 * so the first byte in raw_id is dummy.
+	 */
+	if (id[1] != SPINAND_MFR_WINBOND)
+		return 0;
+
+	ret = spinand_match_and_init(spinand, winbond_spinand_table,
+				     ARRAY_SIZE(winbond_spinand_table), id[2]);
+	if (ret)
+		return ret;
+
+	return 1;
+}
+
+static int winbond_spinand_init(struct spinand_device *spinand)
+{
+	struct nand_device *nand = spinand_to_nand(spinand);
+	unsigned int i;
+
+	/*
+	 * Make sure all dies are in buffer read mode and not continuous read
+	 * mode.
+	 */
+	for (i = 0; i < nand->memorg.ntargets; i++) {
+		spinand_select_target(spinand, i);
+		spinand_upd_cfg(spinand, WINBOND_CFG_BUF_READ,
+				WINBOND_CFG_BUF_READ);
+	}
+
+	return 0;
+}
+
+static const struct spinand_manufacturer_ops winbond_spinand_manuf_ops = {
+	.detect = winbond_spinand_detect,
+	.init = winbond_spinand_init,
+};
+
+const struct spinand_manufacturer winbond_spinand_manufacturer = {
+	.id = SPINAND_MFR_WINBOND,
+	.name = "Winbond",
+	.ops = &winbond_spinand_manuf_ops,
+};

drivers/mtd/onenand/onenand_base.c

@@ -2656,8 +2656,6 @@ int onenand_probe(struct mtd_info *mtd)
 
 	mtd->flags = MTD_CAP_NANDFLASH;
 	mtd->_erase = onenand_erase;
-	mtd->_read = onenand_read;
-	mtd->_write = onenand_write;
 	mtd->_read_oob = onenand_read_oob;
 	mtd->_write_oob = onenand_write_oob;
 	mtd->_sync = onenand_sync;

drivers/spi/Kconfig

@@ -18,6 +18,13 @@ config DM_SPI
 
 if DM_SPI
 
+config SPI_MEM
+	bool "SPI memory extension"
+	help
+	  Enable this option if you want to enable the SPI memory extension.
+	  This extension is meant to simplify interaction with SPI memories
+	  by providing an high-level interface to send memory-like commands.
+
 config ALTERA_SPI
 	bool "Altera SPI driver"
 	help

drivers/spi/Makefile

@@ -8,6 +8,7 @@ ifdef CONFIG_DM_SPI
 obj-y += spi-uclass.o
 obj-$(CONFIG_SANDBOX) += spi-emul-uclass.o
 obj-$(CONFIG_SOFT_SPI) += soft_spi.o
+obj-$(CONFIG_SPI_MEM) += spi-mem.o
 else
 obj-y += spi.o
 obj-$(CONFIG_SOFT_SPI) += soft_spi_legacy.o

drivers/spi/designware_spi.c

@@ -17,6 +17,7 @@
 #include <malloc.h>
 #include <spi.h>
 #include <fdtdec.h>
+#include <reset.h>
 #include <linux/compat.h>
 #include <linux/iopoll.h>
 #include <asm/io.h>
@@ -111,6 +112,8 @@ struct dw_spi_priv {
 	void *tx_end;
 	void *rx;
 	void *rx_end;
+
+	struct reset_ctl_bulk	resets;
 };
 
 static inline u32 dw_read(struct dw_spi_priv *priv, u32 offset)
@@ -231,6 +234,34 @@ err_rate:
 	return -EINVAL;
 }
 
+static int dw_spi_reset(struct udevice *bus)
+{
+	int ret;
+	struct dw_spi_priv *priv = dev_get_priv(bus);
+
+	ret = reset_get_bulk(bus, &priv->resets);
+	if (ret) {
+		/*
+		 * Return 0 if error due to !CONFIG_DM_RESET and reset
+		 * DT property is not present.
+		 */
+		if (ret == -ENOENT || ret == -ENOTSUPP)
+			return 0;
+
+		dev_warn(bus, "Can't get reset: %d\n", ret);
+		return ret;
+	}
+
+	ret = reset_deassert_bulk(&priv->resets);
+	if (ret) {
+		reset_release_bulk(&priv->resets);
+		dev_err(bus, "Failed to reset: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
 static int dw_spi_probe(struct udevice *bus)
 {
 	struct dw_spi_platdata *plat = dev_get_platdata(bus);
@@ -244,6 +275,10 @@ static int dw_spi_probe(struct udevice *bus)
 	if (ret)
 		return ret;
 
+	ret = dw_spi_reset(bus);
+	if (ret)
+		return ret;
+
 	/* Currently only bits_per_word == 8 supported */
 	priv->bits_per_word = 8;
 
@@ -478,6 +513,13 @@ static int dw_spi_set_mode(struct udevice *bus, uint mode)
 	return 0;
 }
 
+static int dw_spi_remove(struct udevice *bus)
+{
+	struct dw_spi_priv *priv = dev_get_priv(bus);
+
+	return reset_release_bulk(&priv->resets);
+}
+
 static const struct dm_spi_ops dw_spi_ops = {
 	.xfer		= dw_spi_xfer,
 	.set_speed	= dw_spi_set_speed,
@@ -502,4 +544,5 @@ U_BOOT_DRIVER(dw_spi) = {
 	.platdata_auto_alloc_size = sizeof(struct dw_spi_platdata),
 	.priv_auto_alloc_size = sizeof(struct dw_spi_priv),
 	.probe = dw_spi_probe,
+	.remove = dw_spi_remove,
 };

drivers/spi/fsl_qspi.c

@@ -84,7 +84,6 @@ DECLARE_GLOBAL_DATA_PTR;
 /* QSPI max chipselect signals number */
 #define FSL_QSPI_MAX_CHIPSELECT_NUM     4
 
-#ifdef CONFIG_DM_SPI
 /**
  * struct fsl_qspi_platdata - platform data for Freescale QSPI
  *
@@ -105,7 +104,6 @@ struct fsl_qspi_platdata {
 	u32 flash_num;
 	u32 num_chipselect;
 };
-#endif
 
 /**
  * struct fsl_qspi_priv - private data for Freescale QSPI
@@ -136,12 +134,6 @@ struct fsl_qspi_priv {
 	struct fsl_qspi_regs *regs;
 };
 
-#ifndef CONFIG_DM_SPI
-struct fsl_qspi {
-	struct spi_slave slave;
-	struct fsl_qspi_priv priv;
-};
-#endif
 
 static u32 qspi_read32(u32 flags, u32 *addr)
 {
@@ -869,136 +861,7 @@ void qspi_cfg_smpr(struct fsl_qspi_priv *priv, u32 clear_bits, u32 set_bits)
 	smpr_val |= set_bits;
 	qspi_write32(priv->flags, &priv->regs->smpr, smpr_val);
 }
-#ifndef CONFIG_DM_SPI
-static unsigned long spi_bases[] = {
-	QSPI0_BASE_ADDR,
-#ifdef CONFIG_MX6SX
-	QSPI1_BASE_ADDR,
-#endif
-};
 
-static unsigned long amba_bases[] = {
-	QSPI0_AMBA_BASE,
-#ifdef CONFIG_MX6SX
-	QSPI1_AMBA_BASE,
-#endif
-};
-
-static inline struct fsl_qspi *to_qspi_spi(struct spi_slave *slave)
-{
-	return container_of(slave, struct fsl_qspi, slave);
-}
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
-		unsigned int max_hz, unsigned int mode)
-{
-	u32 mcr_val;
-	struct fsl_qspi *qspi;
-	struct fsl_qspi_regs *regs;
-	u32 total_size;
-
-	if (bus >= ARRAY_SIZE(spi_bases))
-		return NULL;
-
-	if (cs >= FSL_QSPI_FLASH_NUM)
-		return NULL;
-
-	qspi = spi_alloc_slave(struct fsl_qspi, bus, cs);
-	if (!qspi)
-		return NULL;
-
-#ifdef CONFIG_SYS_FSL_QSPI_BE
-	qspi->priv.flags |= QSPI_FLAG_REGMAP_ENDIAN_BIG;
-#endif
-
-	regs = (struct fsl_qspi_regs *)spi_bases[bus];
-	qspi->priv.regs = regs;
-	/*
-	 * According cs, use different amba_base to choose the
-	 * corresponding flash devices.
-	 *
-	 * If not, only one flash device is used even if passing
-	 * different cs using `sf probe`
-	 */
-	qspi->priv.cur_amba_base = amba_bases[bus] + cs * FSL_QSPI_FLASH_SIZE;
-
-	qspi->slave.max_write_size = TX_BUFFER_SIZE;
-
-	mcr_val = qspi_read32(qspi->priv.flags, &regs->mcr);
-
-	/* Set endianness to LE for i.mx */
-	if (IS_ENABLED(CONFIG_MX6) || IS_ENABLED(CONFIG_MX7))
-		mcr_val = QSPI_MCR_END_CFD_LE;
-
-	qspi_write32(qspi->priv.flags, &regs->mcr,
-		     QSPI_MCR_RESERVED_MASK | QSPI_MCR_MDIS_MASK |
-		     (mcr_val & QSPI_MCR_END_CFD_MASK));
-
-	qspi_cfg_smpr(&qspi->priv,
-		      ~(QSPI_SMPR_FSDLY_MASK | QSPI_SMPR_DDRSMP_MASK |
-		      QSPI_SMPR_FSPHS_MASK | QSPI_SMPR_HSENA_MASK), 0);
-
-	total_size = FSL_QSPI_FLASH_SIZE * FSL_QSPI_FLASH_NUM;
-	/*
-	 * Any read access to non-implemented addresses will provide
-	 * undefined results.
-	 *
-	 * In case single die flash devices, TOP_ADDR_MEMA2 and
-	 * TOP_ADDR_MEMB2 should be initialized/programmed to
-	 * TOP_ADDR_MEMA1 and TOP_ADDR_MEMB1 respectively - in effect,
-	 * setting the size of these devices to 0.  This would ensure
-	 * that the complete memory map is assigned to only one flash device.
-	 */
-	qspi_write32(qspi->priv.flags, &regs->sfa1ad,
-		     FSL_QSPI_FLASH_SIZE | amba_bases[bus]);
-	qspi_write32(qspi->priv.flags, &regs->sfa2ad,
-		     FSL_QSPI_FLASH_SIZE | amba_bases[bus]);
-	qspi_write32(qspi->priv.flags, &regs->sfb1ad,
-		     total_size | amba_bases[bus]);
-	qspi_write32(qspi->priv.flags, &regs->sfb2ad,
-		     total_size | amba_bases[bus]);
-
-	qspi_set_lut(&qspi->priv);
-
-#ifdef CONFIG_SYS_FSL_QSPI_AHB
-	qspi_init_ahb_read(&qspi->priv);
-#endif
-
-	qspi_module_disable(&qspi->priv, 0);
-
-	return &qspi->slave;
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
-	struct fsl_qspi *qspi = to_qspi_spi(slave);
-
-	free(qspi);
-}
-
-int spi_claim_bus(struct spi_slave *slave)
-{
-	return 0;
-}
-
-void spi_release_bus(struct spi_slave *slave)
-{
-	/* Nothing to do */
-}
-
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
-		const void *dout, void *din, unsigned long flags)
-{
-	struct fsl_qspi *qspi = to_qspi_spi(slave);
-
-	return qspi_xfer(&qspi->priv, bitlen, dout, din, flags);
-}
-
-void spi_init(void)
-{
-	/* Nothing to do */
-}
-#else
 static int fsl_qspi_child_pre_probe(struct udevice *dev)
 {
 	struct spi_slave *slave = dev_get_parent_priv(dev);
@@ -1265,4 +1128,3 @@ U_BOOT_DRIVER(fsl_qspi) = {
 	.probe	= fsl_qspi_probe,
 	.child_pre_probe = fsl_qspi_child_pre_probe,
 };
-#endif

drivers/spi/sh_qspi.c

@@ -67,15 +67,12 @@ struct sh_qspi_regs {
 };
 
 struct sh_qspi_slave {
+#ifndef CONFIG_DM_SPI
 	struct spi_slave	slave;
+#endif
 	struct sh_qspi_regs	*regs;
 };
 
-static inline struct sh_qspi_slave *to_sh_qspi(struct spi_slave *slave)
-{
-	return container_of(slave, struct sh_qspi_slave, slave);
-}
-
 static void sh_qspi_init(struct sh_qspi_slave *ss)
 {
 	/* QSPI initialize */
@@ -119,15 +116,8 @@ static void sh_qspi_init(struct sh_qspi_slave *ss)
 	setbits_8(&ss->regs->spcr, SPCR_SPE);
 }
 
-int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+static void sh_qspi_cs_activate(struct sh_qspi_slave *ss)
 {
-	return 1;
-}
-
-void spi_cs_activate(struct spi_slave *slave)
-{
-	struct sh_qspi_slave *ss = to_sh_qspi(slave);
-
 	/* Set master mode only */
 	writeb(SPCR_MSTR, &ss->regs->spcr);
 
@@ -147,61 +137,15 @@ void spi_cs_activate(struct spi_slave *slave)
 	setbits_8(&ss->regs->spcr, SPCR_SPE);
 }
 
-void spi_cs_deactivate(struct spi_slave *slave)
+static void sh_qspi_cs_deactivate(struct sh_qspi_slave *ss)
 {
-	struct sh_qspi_slave *ss = to_sh_qspi(slave);
-
 	/* Disable SPI Function */
 	clrbits_8(&ss->regs->spcr, SPCR_SPE);
 }
 
-void spi_init(void)
+static int sh_qspi_xfer_common(struct sh_qspi_slave *ss, unsigned int bitlen,
+			       const void *dout, void *din, unsigned long flags)
 {
-	/* nothing to do */
-}
-
-struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
-		unsigned int max_hz, unsigned int mode)
-{
-	struct sh_qspi_slave *ss;
-
-	if (!spi_cs_is_valid(bus, cs))
-		return NULL;
-
-	ss = spi_alloc_slave(struct sh_qspi_slave, bus, cs);
-	if (!ss) {
-		printf("SPI_error: Fail to allocate sh_qspi_slave\n");
-		return NULL;
-	}
-
-	ss->regs = (struct sh_qspi_regs *)SH_QSPI_BASE;
-
-	/* Init SH QSPI */
-	sh_qspi_init(ss);
-
-	return &ss->slave;
-}
-
-void spi_free_slave(struct spi_slave *slave)
-{
-	struct sh_qspi_slave *spi = to_sh_qspi(slave);
-
-	free(spi);
-}
-
-int spi_claim_bus(struct spi_slave *slave)
-{
-	return 0;
-}
-
-void spi_release_bus(struct spi_slave *slave)
-{
-}
-
-int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
-	     void *din, unsigned long flags)
-{
-	struct sh_qspi_slave *ss = to_sh_qspi(slave);
 	u32 nbyte, chunk;
 	int i, ret = 0;
 	u8 dtdata = 0, drdata;
@@ -210,7 +154,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
 
 	if (dout == NULL && din == NULL) {
 		if (flags & SPI_XFER_END)
-			spi_cs_deactivate(slave);
+			sh_qspi_cs_deactivate(ss);
 		return 0;
 	}
 
@@ -222,7 +166,7 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
 	nbyte = bitlen / 8;
 
 	if (flags & SPI_XFER_BEGIN) {
-		spi_cs_activate(slave);
+		sh_qspi_cs_activate(ss);
 
 		/* Set 1048576 byte */
 		writel(0x100000, spbmul0);
@@ -273,7 +217,148 @@ int spi_xfer(struct spi_slave *slave, unsigned int bitlen, const void *dout,
 	}
 
 	if (flags & SPI_XFER_END)
-		spi_cs_deactivate(slave);
+		sh_qspi_cs_deactivate(ss);
 
 	return ret;
 }
+
+#ifndef CONFIG_DM_SPI
+static inline struct sh_qspi_slave *to_sh_qspi(struct spi_slave *slave)
+{
+	return container_of(slave, struct sh_qspi_slave, slave);
+}
+
+int spi_cs_is_valid(unsigned int bus, unsigned int cs)
+{
+	return 1;
+}
+
+void spi_cs_activate(struct spi_slave *slave)
+{
+	struct sh_qspi_slave *ss = to_sh_qspi(slave);
+
+	sh_qspi_cs_activate(ss);
+}
+
+void spi_cs_deactivate(struct spi_slave *slave)
+{
+	struct sh_qspi_slave *ss = to_sh_qspi(slave);
+
+	sh_qspi_cs_deactivate(ss);
+}
+
+void spi_init(void)
+{
+	/* nothing to do */
+}
+
+struct spi_slave *spi_setup_slave(unsigned int bus, unsigned int cs,
+		unsigned int max_hz, unsigned int mode)
+{
+	struct sh_qspi_slave *ss;
+
+	if (!spi_cs_is_valid(bus, cs))
+		return NULL;
+
+	ss = spi_alloc_slave(struct sh_qspi_slave, bus, cs);
+	if (!ss) {
+		printf("SPI_error: Fail to allocate sh_qspi_slave\n");
+		return NULL;
+	}
+
+	ss->regs = (struct sh_qspi_regs *)SH_QSPI_BASE;
+
+	/* Init SH QSPI */
+	sh_qspi_init(ss);
+
+	return &ss->slave;
+}
+
+void spi_free_slave(struct spi_slave *slave)
+{
+	struct sh_qspi_slave *spi = to_sh_qspi(slave);
+
+	free(spi);
+}
+
+int spi_claim_bus(struct spi_slave *slave)
+{
+	return 0;
+}
+
+void spi_release_bus(struct spi_slave *slave)
+{
+}
+
+int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
+	     const void *dout, void *din, unsigned long flags)
+{
+	struct sh_qspi_slave *ss = to_sh_qspi(slave);
+
+	return sh_qspi_xfer_common(ss, bitlen, dout, din, flags);
+}
+
+#else
+
+#include <dm.h>
+
+static int sh_qspi_xfer(struct udevice *dev, unsigned int bitlen,
+			const void *dout, void *din, unsigned long flags)
+{
+	struct udevice *bus = dev->parent;
+	struct sh_qspi_slave *ss = dev_get_platdata(bus);
+
+	return sh_qspi_xfer_common(ss, bitlen, dout, din, flags);
+}
+
+static int sh_qspi_set_speed(struct udevice *dev, uint speed)
+{
+	/* This is a SPI NOR controller, do nothing. */
+	return 0;
+}
+
+static int sh_qspi_set_mode(struct udevice *dev, uint mode)
+{
+	/* This is a SPI NOR controller, do nothing. */
+	return 0;
+}
+
+static int sh_qspi_probe(struct udevice *dev)
+{
+	struct sh_qspi_slave *ss = dev_get_platdata(dev);
+
+	sh_qspi_init(ss);
+
+	return 0;
+}
+
+static int sh_qspi_ofdata_to_platdata(struct udevice *dev)
+{
+	struct sh_qspi_slave *plat = dev_get_platdata(dev);
+
+	plat->regs = (struct sh_qspi_regs *)dev_read_addr(dev);
+
+	return 0;
+}
+
+static const struct dm_spi_ops sh_qspi_ops = {
+	.xfer		= sh_qspi_xfer,
+	.set_speed	= sh_qspi_set_speed,
+	.set_mode	= sh_qspi_set_mode,
+};
+
+static const struct udevice_id sh_qspi_ids[] = {
+	{ .compatible = "renesas,qspi" },
+	{ }
+};
+
+U_BOOT_DRIVER(sh_qspi) = {
+	.name		= "sh_qspi",
+	.id		= UCLASS_SPI,
+	.of_match	= sh_qspi_ids,
+	.ops		= &sh_qspi_ops,
+	.ofdata_to_platdata = sh_qspi_ofdata_to_platdata,
+	.platdata_auto_alloc_size = sizeof(struct sh_qspi_slave),
+	.probe		= sh_qspi_probe,
+};
+#endif

drivers/spi/spi-mem.c

@@ -0,0 +1,501 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2018 Exceet Electronics GmbH
+ * Copyright (C) 2018 Bootlin
+ *
+ * Author: Boris Brezillon <boris.brezillon@bootlin.com>
+ */
+
+#ifndef __UBOOT__
+#include <linux/dmaengine.h>
+#include <linux/pm_runtime.h>
+#include "internals.h"
+#else
+#include <spi.h>
+#include <spi-mem.h>
+#endif
+
+#ifndef __UBOOT__
+/**
+ * spi_controller_dma_map_mem_op_data() - DMA-map the buffer attached to a
+ *					  memory operation
+ * @ctlr: the SPI controller requesting this dma_map()
+ * @op: the memory operation containing the buffer to map
+ * @sgt: a pointer to a non-initialized sg_table that will be filled by this
+ *	 function
+ *
+ * Some controllers might want to do DMA on the data buffer embedded in @op.
+ * This helper prepares everything for you and provides a ready-to-use
+ * sg_table. This function is not intended to be called from spi drivers.
+ * Only SPI controller drivers should use it.
+ * Note that the caller must ensure the memory region pointed by
+ * op->data.buf.{in,out} is DMA-able before calling this function.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int spi_controller_dma_map_mem_op_data(struct spi_controller *ctlr,
+				       const struct spi_mem_op *op,
+				       struct sg_table *sgt)
+{
+	struct device *dmadev;
+
+	if (!op->data.nbytes)
+		return -EINVAL;
+
+	if (op->data.dir == SPI_MEM_DATA_OUT && ctlr->dma_tx)
+		dmadev = ctlr->dma_tx->device->dev;
+	else if (op->data.dir == SPI_MEM_DATA_IN && ctlr->dma_rx)
+		dmadev = ctlr->dma_rx->device->dev;
+	else
+		dmadev = ctlr->dev.parent;
+
+	if (!dmadev)
+		return -EINVAL;
+
+	return spi_map_buf(ctlr, dmadev, sgt, op->data.buf.in, op->data.nbytes,
+			   op->data.dir == SPI_MEM_DATA_IN ?
+			   DMA_FROM_DEVICE : DMA_TO_DEVICE);
+}
+EXPORT_SYMBOL_GPL(spi_controller_dma_map_mem_op_data);
+
+/**
+ * spi_controller_dma_unmap_mem_op_data() - DMA-unmap the buffer attached to a
+ *					    memory operation
+ * @ctlr: the SPI controller requesting this dma_unmap()
+ * @op: the memory operation containing the buffer to unmap
+ * @sgt: a pointer to an sg_table previously initialized by
+ *	 spi_controller_dma_map_mem_op_data()
+ *
+ * Some controllers might want to do DMA on the data buffer embedded in @op.
+ * This helper prepares things so that the CPU can access the
+ * op->data.buf.{in,out} buffer again.
+ *
+ * This function is not intended to be called from SPI drivers. Only SPI
+ * controller drivers should use it.
+ *
+ * This function should be called after the DMA operation has finished and is
+ * only valid if the previous spi_controller_dma_map_mem_op_data() call
+ * returned 0.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+void spi_controller_dma_unmap_mem_op_data(struct spi_controller *ctlr,
+					  const struct spi_mem_op *op,
+					  struct sg_table *sgt)
+{
+	struct device *dmadev;
+
+	if (!op->data.nbytes)
+		return;
+
+	if (op->data.dir == SPI_MEM_DATA_OUT && ctlr->dma_tx)
+		dmadev = ctlr->dma_tx->device->dev;
+	else if (op->data.dir == SPI_MEM_DATA_IN && ctlr->dma_rx)
+		dmadev = ctlr->dma_rx->device->dev;
+	else
+		dmadev = ctlr->dev.parent;
+
+	spi_unmap_buf(ctlr, dmadev, sgt,
+		      op->data.dir == SPI_MEM_DATA_IN ?
+		      DMA_FROM_DEVICE : DMA_TO_DEVICE);
+}
+EXPORT_SYMBOL_GPL(spi_controller_dma_unmap_mem_op_data);
+#endif /* __UBOOT__ */
+
+static int spi_check_buswidth_req(struct spi_slave *slave, u8 buswidth, bool tx)
+{
+	u32 mode = slave->mode;
+
+	switch (buswidth) {
+	case 1:
+		return 0;
+
+	case 2:
+		if ((tx && (mode & (SPI_TX_DUAL | SPI_TX_QUAD))) ||
+		    (!tx && (mode & (SPI_RX_DUAL | SPI_RX_QUAD))))
+			return 0;
+
+		break;
+
+	case 4:
+		if ((tx && (mode & SPI_TX_QUAD)) ||
+		    (!tx && (mode & SPI_RX_QUAD)))
+			return 0;
+
+		break;
+
+	default:
+		break;
+	}
+
+	return -ENOTSUPP;
+}
+
+bool spi_mem_default_supports_op(struct spi_slave *slave,
+				 const struct spi_mem_op *op)
+{
+	if (spi_check_buswidth_req(slave, op->cmd.buswidth, true))
+		return false;
+
+	if (op->addr.nbytes &&
+	    spi_check_buswidth_req(slave, op->addr.buswidth, true))
+		return false;
+
+	if (op->dummy.nbytes &&
+	    spi_check_buswidth_req(slave, op->dummy.buswidth, true))
+		return false;
+
+	if (op->data.nbytes &&
+	    spi_check_buswidth_req(slave, op->data.buswidth,
+				   op->data.dir == SPI_MEM_DATA_OUT))
+		return false;
+
+	return true;
+}
+EXPORT_SYMBOL_GPL(spi_mem_default_supports_op);
+
+/**
+ * spi_mem_supports_op() - Check if a memory device and the controller it is
+ *			   connected to support a specific memory operation
+ * @slave: the SPI device
+ * @op: the memory operation to check
+ *
+ * Some controllers are only supporting Single or Dual IOs, others might only
+ * support specific opcodes, or it can even be that the controller and device
+ * both support Quad IOs but the hardware prevents you from using it because
+ * only 2 IO lines are connected.
+ *
+ * This function checks whether a specific operation is supported.
+ *
+ * Return: true if @op is supported, false otherwise.
+ */
+bool spi_mem_supports_op(struct spi_slave *slave,
+			 const struct spi_mem_op *op)
+{
+	struct udevice *bus = slave->dev->parent;
+	struct dm_spi_ops *ops = spi_get_ops(bus);
+
+	if (ops->mem_ops && ops->mem_ops->supports_op)
+		return ops->mem_ops->supports_op(slave, op);
+
+	return spi_mem_default_supports_op(slave, op);
+}
+EXPORT_SYMBOL_GPL(spi_mem_supports_op);
+
+/**
+ * spi_mem_exec_op() - Execute a memory operation
+ * @slave: the SPI device
+ * @op: the memory operation to execute
+ *
+ * Executes a memory operation.
+ *
+ * This function first checks that @op is supported and then tries to execute
+ * it.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+int spi_mem_exec_op(struct spi_slave *slave, const struct spi_mem_op *op)
+{
+	struct udevice *bus = slave->dev->parent;
+	struct dm_spi_ops *ops = spi_get_ops(bus);
+	unsigned int pos = 0;
+	const u8 *tx_buf = NULL;
+	u8 *rx_buf = NULL;
+	u8 *op_buf;
+	int op_len;
+	u32 flag;
+	int ret;
+	int i;
+
+	if (!spi_mem_supports_op(slave, op))
+		return -ENOTSUPP;
+
+	if (ops->mem_ops) {
+#ifndef __UBOOT__
+		/*
+		 * Flush the message queue before executing our SPI memory
+		 * operation to prevent preemption of regular SPI transfers.
+		 */
+		spi_flush_queue(ctlr);
+
+		if (ctlr->auto_runtime_pm) {
+			ret = pm_runtime_get_sync(ctlr->dev.parent);
+			if (ret < 0) {
+				dev_err(&ctlr->dev,
+					"Failed to power device: %d\n",
+					ret);
+				return ret;
+			}
+		}
+
+		mutex_lock(&ctlr->bus_lock_mutex);
+		mutex_lock(&ctlr->io_mutex);
+#endif
+		ret = ops->mem_ops->exec_op(slave, op);
+#ifndef __UBOOT__
+		mutex_unlock(&ctlr->io_mutex);
+		mutex_unlock(&ctlr->bus_lock_mutex);
+
+		if (ctlr->auto_runtime_pm)
+			pm_runtime_put(ctlr->dev.parent);
+#endif
+
+		/*
+		 * Some controllers only optimize specific paths (typically the
+		 * read path) and expect the core to use the regular SPI
+		 * interface in other cases.
+		 */
+		if (!ret || ret != -ENOTSUPP)
+			return ret;
+	}
+
+#ifndef __UBOOT__
+	tmpbufsize = sizeof(op->cmd.opcode) + op->addr.nbytes +
+		     op->dummy.nbytes;
+
+	/*
+	 * Allocate a buffer to transmit the CMD, ADDR cycles with kmalloc() so
+	 * we're guaranteed that this buffer is DMA-able, as required by the
+	 * SPI layer.
+	 */
+	tmpbuf = kzalloc(tmpbufsize, GFP_KERNEL | GFP_DMA);
+	if (!tmpbuf)
+		return -ENOMEM;
+
+	spi_message_init(&msg);
+
+	tmpbuf[0] = op->cmd.opcode;
+	xfers[xferpos].tx_buf = tmpbuf;
+	xfers[xferpos].len = sizeof(op->cmd.opcode);
+	xfers[xferpos].tx_nbits = op->cmd.buswidth;
+	spi_message_add_tail(&xfers[xferpos], &msg);
+	xferpos++;
+	totalxferlen++;
+
+	if (op->addr.nbytes) {
+		int i;
+
+		for (i = 0; i < op->addr.nbytes; i++)
+			tmpbuf[i + 1] = op->addr.val >>
+					(8 * (op->addr.nbytes - i - 1));
+
+		xfers[xferpos].tx_buf = tmpbuf + 1;
+		xfers[xferpos].len = op->addr.nbytes;
+		xfers[xferpos].tx_nbits = op->addr.buswidth;
+		spi_message_add_tail(&xfers[xferpos], &msg);
+		xferpos++;
+		totalxferlen += op->addr.nbytes;
+	}
+
+	if (op->dummy.nbytes) {
+		memset(tmpbuf + op->addr.nbytes + 1, 0xff, op->dummy.nbytes);
+		xfers[xferpos].tx_buf = tmpbuf + op->addr.nbytes + 1;
+		xfers[xferpos].len = op->dummy.nbytes;
+		xfers[xferpos].tx_nbits = op->dummy.buswidth;
+		spi_message_add_tail(&xfers[xferpos], &msg);
+		xferpos++;
+		totalxferlen += op->dummy.nbytes;
+	}
+
+	if (op->data.nbytes) {
+		if (op->data.dir == SPI_MEM_DATA_IN) {
+			xfers[xferpos].rx_buf = op->data.buf.in;
+			xfers[xferpos].rx_nbits = op->data.buswidth;
+		} else {
+			xfers[xferpos].tx_buf = op->data.buf.out;
+			xfers[xferpos].tx_nbits = op->data.buswidth;
+		}
+
+		xfers[xferpos].len = op->data.nbytes;
+		spi_message_add_tail(&xfers[xferpos], &msg);
+		xferpos++;
+		totalxferlen += op->data.nbytes;
+	}
+
+	ret = spi_sync(slave, &msg);
+
+	kfree(tmpbuf);
+
+	if (ret)
+		return ret;
+
+	if (msg.actual_length != totalxferlen)
+		return -EIO;
+#else
+
+	/* U-Boot does not support parallel SPI data lanes */
+	if ((op->cmd.buswidth != 1) ||
+	    (op->addr.nbytes && op->addr.buswidth != 1) ||
+	    (op->dummy.nbytes && op->dummy.buswidth != 1) ||
+	    (op->data.nbytes && op->data.buswidth != 1)) {
+		printf("Dual/Quad raw SPI transfers not supported\n");
+		return -ENOTSUPP;
+	}
+
+	if (op->data.nbytes) {
+		if (op->data.dir == SPI_MEM_DATA_IN)
+			rx_buf = op->data.buf.in;
+		else
+			tx_buf = op->data.buf.out;
+	}
+
+	op_len = sizeof(op->cmd.opcode) + op->addr.nbytes + op->dummy.nbytes;
+	op_buf = calloc(1, op_len);
+
+	ret = spi_claim_bus(slave);
+	if (ret < 0)
+		return ret;
+
+	op_buf[pos++] = op->cmd.opcode;
+
+	if (op->addr.nbytes) {
+		for (i = 0; i < op->addr.nbytes; i++)
+			op_buf[pos + i] = op->addr.val >>
+				(8 * (op->addr.nbytes - i - 1));
+
+		pos += op->addr.nbytes;
+	}
+
+	if (op->dummy.nbytes)
+		memset(op_buf + pos, 0xff, op->dummy.nbytes);
+
+	/* 1st transfer: opcode + address + dummy cycles */
+	flag = SPI_XFER_BEGIN;
+	/* Make sure to set END bit if no tx or rx data messages follow */
+	if (!tx_buf && !rx_buf)
+		flag |= SPI_XFER_END;
+
+	ret = spi_xfer(slave, op_len * 8, op_buf, NULL, flag);
+	if (ret)
+		return ret;
+
+	/* 2nd transfer: rx or tx data path */
+	if (tx_buf || rx_buf) {
+		ret = spi_xfer(slave, op->data.nbytes * 8, tx_buf,
+			       rx_buf, SPI_XFER_END);
+		if (ret)
+			return ret;
+	}
+
+	spi_release_bus(slave);
+
+	for (i = 0; i < pos; i++)
+		debug("%02x ", op_buf[i]);
+	debug("| [%dB %s] ",
+	      tx_buf || rx_buf ? op->data.nbytes : 0,
+	      tx_buf || rx_buf ? (tx_buf ? "out" : "in") : "-");
+	for (i = 0; i < op->data.nbytes; i++)
+		debug("%02x ", tx_buf ? tx_buf[i] : rx_buf[i]);
+	debug("[ret %d]\n", ret);
+
+	free(op_buf);
+
+	if (ret < 0)
+		return ret;
+#endif /* __UBOOT__ */
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(spi_mem_exec_op);
+
+/**
+ * spi_mem_adjust_op_size() - Adjust the data size of a SPI mem operation to
+ *				 match controller limitations
+ * @slave: the SPI device
+ * @op: the operation to adjust
+ *
+ * Some controllers have FIFO limitations and must split a data transfer
+ * operation into multiple ones, others require a specific alignment for
+ * optimized accesses. This function allows SPI mem drivers to split a single
+ * operation into multiple sub-operations when required.
+ *
+ * Return: a negative error code if the controller can't properly adjust @op,
+ *	   0 otherwise. Note that @op->data.nbytes will be updated if @op
+ *	   can't be handled in a single step.
+ */
+int spi_mem_adjust_op_size(struct spi_slave *slave, struct spi_mem_op *op)
+{
+	struct udevice *bus = slave->dev->parent;
+	struct dm_spi_ops *ops = spi_get_ops(bus);
+
+	if (ops->mem_ops && ops->mem_ops->adjust_op_size)
+		return ops->mem_ops->adjust_op_size(slave, op);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(spi_mem_adjust_op_size);
+
+#ifndef __UBOOT__
+static inline struct spi_mem_driver *to_spi_mem_drv(struct device_driver *drv)
+{
+	return container_of(drv, struct spi_mem_driver, spidrv.driver);
+}
+
+static int spi_mem_probe(struct spi_device *spi)
+{
+	struct spi_mem_driver *memdrv = to_spi_mem_drv(spi->dev.driver);
+	struct spi_mem *mem;
+
+	mem = devm_kzalloc(&spi->dev, sizeof(*mem), GFP_KERNEL);
+	if (!mem)
+		return -ENOMEM;
+
+	mem->spi = spi;
+	spi_set_drvdata(spi, mem);
+
+	return memdrv->probe(mem);
+}
+
+static int spi_mem_remove(struct spi_device *spi)
+{
+	struct spi_mem_driver *memdrv = to_spi_mem_drv(spi->dev.driver);
+	struct spi_mem *mem = spi_get_drvdata(spi);
+
+	if (memdrv->remove)
+		return memdrv->remove(mem);
+
+	return 0;
+}
+
+static void spi_mem_shutdown(struct spi_device *spi)
+{
+	struct spi_mem_driver *memdrv = to_spi_mem_drv(spi->dev.driver);
+	struct spi_mem *mem = spi_get_drvdata(spi);
+
+	if (memdrv->shutdown)
+		memdrv->shutdown(mem);
+}
+
+/**
+ * spi_mem_driver_register_with_owner() - Register a SPI memory driver
+ * @memdrv: the SPI memory driver to register
+ * @owner: the owner of this driver
+ *
+ * Registers a SPI memory driver.
+ *
+ * Return: 0 in case of success, a negative error core otherwise.
+ */
+
+int spi_mem_driver_register_with_owner(struct spi_mem_driver *memdrv,
+				       struct module *owner)
+{
+	memdrv->spidrv.probe = spi_mem_probe;
+	memdrv->spidrv.remove = spi_mem_remove;
+	memdrv->spidrv.shutdown = spi_mem_shutdown;
+
+	return __spi_register_driver(owner, &memdrv->spidrv);
+}
+EXPORT_SYMBOL_GPL(spi_mem_driver_register_with_owner);
+
+/**
+ * spi_mem_driver_unregister_with_owner() - Unregister a SPI memory driver
+ * @memdrv: the SPI memory driver to unregister
+ *
+ * Unregisters a SPI memory driver.
+ */
+void spi_mem_driver_unregister(struct spi_mem_driver *memdrv)
+{
+	spi_unregister_driver(&memdrv->spidrv);
+}
+EXPORT_SYMBOL_GPL(spi_mem_driver_unregister);
+#endif /* __UBOOT__ */

include/configs/MPC8313ERDB.h

@@ -240,7 +240,7 @@
 				/* LB refresh timer prescal, 266MHz/32 */
 #define CONFIG_SYS_LBC_MRTPR	0x20000000  /*TODO */
 
-/* drivers/mtd/nand/nand.c */
+/* drivers/mtd/nand/raw/nand.c */
 #if defined(CONFIG_NAND) && defined(CONFIG_SPL_BUILD)
 #define CONFIG_SYS_NAND_BASE		0xFFF00000
 #else

include/jffs2/load_kernel.h

@@ -15,9 +15,12 @@
 #define MTD_DEV_TYPE_NOR	0x0001
 #define MTD_DEV_TYPE_NAND	0x0002
 #define MTD_DEV_TYPE_ONENAND	0x0004
+#define MTD_DEV_TYPE_SPINAND	0x0008
 
-#define MTD_DEV_TYPE(type) ((type == MTD_DEV_TYPE_NAND) ? "nand" :	\
-			(type == MTD_DEV_TYPE_ONENAND) ? "onenand" : "nor")
+#define MTD_DEV_TYPE(type) (type == MTD_DEV_TYPE_NAND ? "nand" :	\
+			    (type == MTD_DEV_TYPE_NOR ? "nor" :		\
+			     (type == MTD_DEV_TYPE_ONENAND ? "onenand" : \
+			      "spi-nand")))				\
 
 struct mtd_device {
 	struct list_head link;

include/linux/mtd/mtd.h

@@ -20,7 +20,11 @@
 #include <linux/compat.h>
 #include <mtd/mtd-abi.h>
 #include <linux/errno.h>
+#include <linux/list.h>
 #include <div64.h>
+#if IS_ENABLED(CONFIG_DM)
+#include <dm/device.h>
+#endif
 
 #define MAX_MTD_DEVICES 32
 #endif
@@ -304,8 +308,64 @@ struct mtd_info {
 	struct udevice *dev;
 #endif
 	int usecount;
+
+	/* MTD devices do not have any parent. MTD partitions do. */
+	struct mtd_info *parent;
+
+	/*
+	 * Offset of the partition relatively to the parent offset.
+	 * Is 0 for real MTD devices (ie. not partitions).
+	 */
+	u64 offset;
+
+	/*
+	 * List node used to add an MTD partition to the parent
+	 * partition list.
+	 */
+	struct list_head node;
+
+	/*
+	 * List of partitions attached to this MTD device (the parent
+	 * MTD device can itself be a partition).
+	 */
+	struct list_head partitions;
 };
 
+#if IS_ENABLED(CONFIG_DM)
+static inline void mtd_set_of_node(struct mtd_info *mtd,
+				   const struct device_node *np)
+{
+	mtd->dev->node.np = np;
+}
+
+static inline const struct device_node *mtd_get_of_node(struct mtd_info *mtd)
+{
+	return mtd->dev->node.np;
+}
+#else
+struct device_node;
+
+static inline void mtd_set_of_node(struct mtd_info *mtd,
+				   const struct device_node *np)
+{
+}
+
+static inline const struct device_node *mtd_get_of_node(struct mtd_info *mtd)
+{
+	return NULL;
+}
+#endif
+
+static inline bool mtd_is_partition(const struct mtd_info *mtd)
+{
+	return mtd->parent;
+}
+
+static inline bool mtd_has_partitions(const struct mtd_info *mtd)
+{
+	return !list_empty(&mtd->partitions);
+}
+
 int mtd_ooblayout_ecc(struct mtd_info *mtd, int section,
 		      struct mtd_oob_region *oobecc);
 int mtd_ooblayout_find_eccregion(struct mtd_info *mtd, int eccbyte,
@@ -351,17 +411,7 @@ int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen,
 		    const u_char *buf);
 
 int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops);
-
-static inline int mtd_write_oob(struct mtd_info *mtd, loff_t to,
-				struct mtd_oob_ops *ops)
-{
-	ops->retlen = ops->oobretlen = 0;
-	if (!mtd->_write_oob)
-		return -EOPNOTSUPP;
-	if (!(mtd->flags & MTD_WRITEABLE))
-		return -EROFS;
-	return mtd->_write_oob(mtd, to, ops);
-}
+int mtd_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops);
 
 int mtd_get_fact_prot_info(struct mtd_info *mtd, size_t len, size_t *retlen,
 			   struct otp_info *buf);
@@ -515,6 +565,12 @@ int del_mtd_device(struct mtd_info *mtd);
 int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
 int del_mtd_partitions(struct mtd_info *);
 
+struct mtd_info *__mtd_next_device(int i);
+#define mtd_for_each_device(mtd)			\
+	for ((mtd) = __mtd_next_device(0);		\
+	     (mtd) != NULL;				\
+	     (mtd) = __mtd_next_device(mtd->index + 1))
+
 int mtd_arg_off(const char *arg, int *idx, loff_t *off, loff_t *size,
 		loff_t *maxsize, int devtype, uint64_t chipsize);
 int mtd_arg_off_size(int argc, char *const argv[], int *idx, loff_t *off,
@@ -525,5 +581,10 @@ int mtd_arg_off_size(int argc, char *const argv[], int *idx, loff_t *off,
 void mtd_get_len_incl_bad(struct mtd_info *mtd, uint64_t offset,
 			  const uint64_t length, uint64_t *len_incl_bad,
 			  int *truncated);
+
+/* drivers/mtd/mtd_uboot.c */
+int mtd_search_alternate_name(const char *mtdname, char *altname,
+			      unsigned int max_len);
+
 #endif
 #endif /* __MTD_MTD_H__ */

include/linux/mtd/nand.h

@@ -0,0 +1,734 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Copyright 2017 - Free Electrons
+ *
+ *  Authors:
+ *	Boris Brezillon <boris.brezillon@free-electrons.com>
+ *	Peter Pan <peterpandong@micron.com>
+ */
+
+#ifndef __LINUX_MTD_NAND_H
+#define __LINUX_MTD_NAND_H
+
+#include <linux/mtd/mtd.h>
+
+/**
+ * struct nand_memory_organization - Memory organization structure
+ * @bits_per_cell: number of bits per NAND cell
+ * @pagesize: page size
+ * @oobsize: OOB area size
+ * @pages_per_eraseblock: number of pages per eraseblock
+ * @eraseblocks_per_lun: number of eraseblocks per LUN (Logical Unit Number)
+ * @planes_per_lun: number of planes per LUN
+ * @luns_per_target: number of LUN per target (target is a synonym for die)
+ * @ntargets: total number of targets exposed by the NAND device
+ */
+struct nand_memory_organization {
+	unsigned int bits_per_cell;
+	unsigned int pagesize;
+	unsigned int oobsize;
+	unsigned int pages_per_eraseblock;
+	unsigned int eraseblocks_per_lun;
+	unsigned int planes_per_lun;
+	unsigned int luns_per_target;
+	unsigned int ntargets;
+};
+
+#define NAND_MEMORG(bpc, ps, os, ppe, epl, ppl, lpt, nt)	\
+	{							\
+		.bits_per_cell = (bpc),				\
+		.pagesize = (ps),				\
+		.oobsize = (os),				\
+		.pages_per_eraseblock = (ppe),			\
+		.eraseblocks_per_lun = (epl),			\
+		.planes_per_lun = (ppl),			\
+		.luns_per_target = (lpt),			\
+		.ntargets = (nt),				\
+	}
+
+/**
+ * struct nand_row_converter - Information needed to convert an absolute offset
+ *			       into a row address
+ * @lun_addr_shift: position of the LUN identifier in the row address
+ * @eraseblock_addr_shift: position of the eraseblock identifier in the row
+ *			   address
+ */
+struct nand_row_converter {
+	unsigned int lun_addr_shift;
+	unsigned int eraseblock_addr_shift;
+};
+
+/**
+ * struct nand_pos - NAND position object
+ * @target: the NAND target/die
+ * @lun: the LUN identifier
+ * @plane: the plane within the LUN
+ * @eraseblock: the eraseblock within the LUN
+ * @page: the page within the LUN
+ *
+ * These information are usually used by specific sub-layers to select the
+ * appropriate target/die and generate a row address to pass to the device.
+ */
+struct nand_pos {
+	unsigned int target;
+	unsigned int lun;
+	unsigned int plane;
+	unsigned int eraseblock;
+	unsigned int page;
+};
+
+/**
+ * struct nand_page_io_req - NAND I/O request object
+ * @pos: the position this I/O request is targeting
+ * @dataoffs: the offset within the page
+ * @datalen: number of data bytes to read from/write to this page
+ * @databuf: buffer to store data in or get data from
+ * @ooboffs: the OOB offset within the page
+ * @ooblen: the number of OOB bytes to read from/write to this page
+ * @oobbuf: buffer to store OOB data in or get OOB data from
+ * @mode: one of the %MTD_OPS_XXX mode
+ *
+ * This object is used to pass per-page I/O requests to NAND sub-layers. This
+ * way all useful information are already formatted in a useful way and
+ * specific NAND layers can focus on translating these information into
+ * specific commands/operations.
+ */
+struct nand_page_io_req {
+	struct nand_pos pos;
+	unsigned int dataoffs;
+	unsigned int datalen;
+	union {
+		const void *out;
+		void *in;
+	} databuf;
+	unsigned int ooboffs;
+	unsigned int ooblen;
+	union {
+		const void *out;
+		void *in;
+	} oobbuf;
+	int mode;
+};
+
+/**
+ * struct nand_ecc_req - NAND ECC requirements
+ * @strength: ECC strength
+ * @step_size: ECC step/block size
+ */
+struct nand_ecc_req {
+	unsigned int strength;
+	unsigned int step_size;
+};
+
+#define NAND_ECCREQ(str, stp) { .strength = (str), .step_size = (stp) }
+
+/**
+ * struct nand_bbt - bad block table object
+ * @cache: in memory BBT cache
+ */
+struct nand_bbt {
+	unsigned long *cache;
+};
+
+struct nand_device;
+
+/**
+ * struct nand_ops - NAND operations
+ * @erase: erase a specific block. No need to check if the block is bad before
+ *	   erasing, this has been taken care of by the generic NAND layer
+ * @markbad: mark a specific block bad. No need to check if the block is
+ *	     already marked bad, this has been taken care of by the generic
+ *	     NAND layer. This method should just write the BBM (Bad Block
+ *	     Marker) so that future call to struct_nand_ops->isbad() return
+ *	     true
+ * @isbad: check whether a block is bad or not. This method should just read
+ *	   the BBM and return whether the block is bad or not based on what it
+ *	   reads
+ *
+ * These are all low level operations that should be implemented by specialized
+ * NAND layers (SPI NAND, raw NAND, ...).
+ */
+struct nand_ops {
+	int (*erase)(struct nand_device *nand, const struct nand_pos *pos);
+	int (*markbad)(struct nand_device *nand, const struct nand_pos *pos);
+	bool (*isbad)(struct nand_device *nand, const struct nand_pos *pos);
+};
+
+/**
+ * struct nand_device - NAND device
+ * @mtd: MTD instance attached to the NAND device
+ * @memorg: memory layout
+ * @eccreq: ECC requirements
+ * @rowconv: position to row address converter
+ * @bbt: bad block table info
+ * @ops: NAND operations attached to the NAND device
+ *
+ * Generic NAND object. Specialized NAND layers (raw NAND, SPI NAND, OneNAND)
+ * should declare their own NAND object embedding a nand_device struct (that's
+ * how inheritance is done).
+ * struct_nand_device->memorg and struct_nand_device->eccreq should be filled
+ * at device detection time to reflect the NAND device
+ * capabilities/requirements. Once this is done nanddev_init() can be called.
+ * It will take care of converting NAND information into MTD ones, which means
+ * the specialized NAND layers should never manually tweak
+ * struct_nand_device->mtd except for the ->_read/write() hooks.
+ */
+struct nand_device {
+	struct mtd_info *mtd;
+	struct nand_memory_organization memorg;
+	struct nand_ecc_req eccreq;
+	struct nand_row_converter rowconv;
+	struct nand_bbt bbt;
+	const struct nand_ops *ops;
+};
+
+/**
+ * struct nand_io_iter - NAND I/O iterator
+ * @req: current I/O request
+ * @oobbytes_per_page: maximum number of OOB bytes per page
+ * @dataleft: remaining number of data bytes to read/write
+ * @oobleft: remaining number of OOB bytes to read/write
+ *
+ * Can be used by specialized NAND layers to iterate over all pages covered
+ * by an MTD I/O request, which should greatly simplifies the boiler-plate
+ * code needed to read/write data from/to a NAND device.
+ */
+struct nand_io_iter {
+	struct nand_page_io_req req;
+	unsigned int oobbytes_per_page;
+	unsigned int dataleft;
+	unsigned int oobleft;
+};
+
+/**
+ * mtd_to_nanddev() - Get the NAND device attached to the MTD instance
+ * @mtd: MTD instance
+ *
+ * Return: the NAND device embedding @mtd.
+ */
+static inline struct nand_device *mtd_to_nanddev(struct mtd_info *mtd)
+{
+	return mtd->priv;
+}
+
+/**
+ * nanddev_to_mtd() - Get the MTD device attached to a NAND device
+ * @nand: NAND device
+ *
+ * Return: the MTD device embedded in @nand.
+ */
+static inline struct mtd_info *nanddev_to_mtd(struct nand_device *nand)
+{
+	return nand->mtd;
+}
+
+/*
+ * nanddev_bits_per_cell() - Get the number of bits per cell
+ * @nand: NAND device
+ *
+ * Return: the number of bits per cell.
+ */
+static inline unsigned int nanddev_bits_per_cell(const struct nand_device *nand)
+{
+	return nand->memorg.bits_per_cell;
+}
+
+/**
+ * nanddev_page_size() - Get NAND page size
+ * @nand: NAND device
+ *
+ * Return: the page size.
+ */
+static inline size_t nanddev_page_size(const struct nand_device *nand)
+{
+	return nand->memorg.pagesize;
+}
+
+/**
+ * nanddev_per_page_oobsize() - Get NAND OOB size
+ * @nand: NAND device
+ *
+ * Return: the OOB size.
+ */
+static inline unsigned int
+nanddev_per_page_oobsize(const struct nand_device *nand)
+{
+	return nand->memorg.oobsize;
+}
+
+/**
+ * nanddev_pages_per_eraseblock() - Get the number of pages per eraseblock
+ * @nand: NAND device
+ *
+ * Return: the number of pages per eraseblock.
+ */
+static inline unsigned int
+nanddev_pages_per_eraseblock(const struct nand_device *nand)
+{
+	return nand->memorg.pages_per_eraseblock;
+}
+
+/**
+ * nanddev_per_page_oobsize() - Get NAND erase block size
+ * @nand: NAND device
+ *
+ * Return: the eraseblock size.
+ */
+static inline size_t nanddev_eraseblock_size(const struct nand_device *nand)
+{
+	return nand->memorg.pagesize * nand->memorg.pages_per_eraseblock;
+}
+
+/**
+ * nanddev_eraseblocks_per_lun() - Get the number of eraseblocks per LUN
+ * @nand: NAND device
+ *
+ * Return: the number of eraseblocks per LUN.
+ */
+static inline unsigned int
+nanddev_eraseblocks_per_lun(const struct nand_device *nand)
+{
+	return nand->memorg.eraseblocks_per_lun;
+}
+
+/**
+ * nanddev_target_size() - Get the total size provided by a single target/die
+ * @nand: NAND device
+ *
+ * Return: the total size exposed by a single target/die in bytes.
+ */
+static inline u64 nanddev_target_size(const struct nand_device *nand)
+{
+	return (u64)nand->memorg.luns_per_target *
+	       nand->memorg.eraseblocks_per_lun *
+	       nand->memorg.pages_per_eraseblock *
+	       nand->memorg.pagesize;
+}
+
+/**
+ * nanddev_ntarget() - Get the total of targets
+ * @nand: NAND device
+ *
+ * Return: the number of targets/dies exposed by @nand.
+ */
+static inline unsigned int nanddev_ntargets(const struct nand_device *nand)
+{
+	return nand->memorg.ntargets;
+}
+
+/**
+ * nanddev_neraseblocks() - Get the total number of erasablocks
+ * @nand: NAND device
+ *
+ * Return: the total number of eraseblocks exposed by @nand.
+ */
+static inline unsigned int nanddev_neraseblocks(const struct nand_device *nand)
+{
+	return (u64)nand->memorg.luns_per_target *
+	       nand->memorg.eraseblocks_per_lun *
+	       nand->memorg.pages_per_eraseblock;
+}
+
+/**
+ * nanddev_size() - Get NAND size
+ * @nand: NAND device
+ *
+ * Return: the total size (in bytes) exposed by @nand.
+ */
+static inline u64 nanddev_size(const struct nand_device *nand)
+{
+	return nanddev_target_size(nand) * nanddev_ntargets(nand);
+}
+
+/**
+ * nanddev_get_memorg() - Extract memory organization info from a NAND device
+ * @nand: NAND device
+ *
+ * This can be used by the upper layer to fill the memorg info before calling
+ * nanddev_init().
+ *
+ * Return: the memorg object embedded in the NAND device.
+ */
+static inline struct nand_memory_organization *
+nanddev_get_memorg(struct nand_device *nand)
+{
+	return &nand->memorg;
+}
+
+int nanddev_init(struct nand_device *nand, const struct nand_ops *ops,
+		 struct module *owner);
+void nanddev_cleanup(struct nand_device *nand);
+
+/**
+ * nanddev_register() - Register a NAND device
+ * @nand: NAND device
+ *
+ * Register a NAND device.
+ * This function is just a wrapper around mtd_device_register()
+ * registering the MTD device embedded in @nand.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+static inline int nanddev_register(struct nand_device *nand)
+{
+	return mtd_device_register(nand->mtd, NULL, 0);
+}
+
+/**
+ * nanddev_unregister() - Unregister a NAND device
+ * @nand: NAND device
+ *
+ * Unregister a NAND device.
+ * This function is just a wrapper around mtd_device_unregister()
+ * unregistering the MTD device embedded in @nand.
+ *
+ * Return: 0 in case of success, a negative error code otherwise.
+ */
+static inline int nanddev_unregister(struct nand_device *nand)
+{
+	return mtd_device_unregister(nand->mtd);
+}
+
+/**
+ * nanddev_set_of_node() - Attach a DT node to a NAND device
+ * @nand: NAND device
+ * @np: DT node
+ *
+ * Attach a DT node to a NAND device.
+ */
+static inline void nanddev_set_of_node(struct nand_device *nand,
+				       const struct device_node *np)
+{
+	mtd_set_of_node(nand->mtd, np);
+}
+
+/**
+ * nanddev_get_of_node() - Retrieve the DT node attached to a NAND device
+ * @nand: NAND device
+ *
+ * Return: the DT node attached to @nand.
+ */
+static inline const struct device_node *nanddev_get_of_node(struct nand_device *nand)
+{
+	return mtd_get_of_node(nand->mtd);
+}
+
+/**
+ * nanddev_offs_to_pos() - Convert an absolute NAND offset into a NAND position
+ * @nand: NAND device
+ * @offs: absolute NAND offset (usually passed by the MTD layer)
+ * @pos: a NAND position object to fill in
+ *
+ * Converts @offs into a nand_pos representation.
+ *
+ * Return: the offset within the NAND page pointed by @pos.
+ */
+static inline unsigned int nanddev_offs_to_pos(struct nand_device *nand,
+					       loff_t offs,
+					       struct nand_pos *pos)
+{
+	unsigned int pageoffs;
+	u64 tmp = offs;
+
+	pageoffs = do_div(tmp, nand->memorg.pagesize);
+	pos->page = do_div(tmp, nand->memorg.pages_per_eraseblock);
+	pos->eraseblock = do_div(tmp, nand->memorg.eraseblocks_per_lun);
+	pos->plane = pos->eraseblock % nand->memorg.planes_per_lun;
+	pos->lun = do_div(tmp, nand->memorg.luns_per_target);
+	pos->target = tmp;
+
+	return pageoffs;
+}
+
+/**
+ * nanddev_pos_cmp() - Compare two NAND positions
+ * @a: First NAND position
+ * @b: Second NAND position
+ *
+ * Compares two NAND positions.
+ *
+ * Return: -1 if @a < @b, 0 if @a == @b and 1 if @a > @b.
+ */
+static inline int nanddev_pos_cmp(const struct nand_pos *a,
+				  const struct nand_pos *b)
+{
+	if (a->target != b->target)
+		return a->target < b->target ? -1 : 1;
+
+	if (a->lun != b->lun)
+		return a->lun < b->lun ? -1 : 1;
+
+	if (a->eraseblock != b->eraseblock)
+		return a->eraseblock < b->eraseblock ? -1 : 1;
+
+	if (a->page != b->page)
+		return a->page < b->page ? -1 : 1;
+
+	return 0;
+}
+
+/**
+ * nanddev_pos_to_offs() - Convert a NAND position into an absolute offset
+ * @nand: NAND device
+ * @pos: the NAND position to convert
+ *
+ * Converts @pos NAND position into an absolute offset.
+ *
+ * Return: the absolute offset. Note that @pos points to the beginning of a
+ *	   page, if one wants to point to a specific offset within this page
+ *	   the returned offset has to be adjusted manually.
+ */
+static inline loff_t nanddev_pos_to_offs(struct nand_device *nand,
+					 const struct nand_pos *pos)
+{
+	unsigned int npages;
+
+	npages = pos->page +
+		 ((pos->eraseblock +
+		   (pos->lun +
+		    (pos->target * nand->memorg.luns_per_target)) *
+		   nand->memorg.eraseblocks_per_lun) *
+		  nand->memorg.pages_per_eraseblock);
+
+	return (loff_t)npages * nand->memorg.pagesize;
+}
+
+/**
+ * nanddev_pos_to_row() - Extract a row address from a NAND position
+ * @nand: NAND device
+ * @pos: the position to convert
+ *
+ * Converts a NAND position into a row address that can then be passed to the
+ * device.
+ *
+ * Return: the row address extracted from @pos.
+ */
+static inline unsigned int nanddev_pos_to_row(struct nand_device *nand,
+					      const struct nand_pos *pos)
+{
+	return (pos->lun << nand->rowconv.lun_addr_shift) |
+	       (pos->eraseblock << nand->rowconv.eraseblock_addr_shift) |
+	       pos->page;
+}
+
+/**
+ * nanddev_pos_next_target() - Move a position to the next target/die
+ * @nand: NAND device
+ * @pos: the position to update
+ *
+ * Updates @pos to point to the start of the next target/die. Useful when you
+ * want to iterate over all targets/dies of a NAND device.
+ */
+static inline void nanddev_pos_next_target(struct nand_device *nand,
+					   struct nand_pos *pos)
+{
+	pos->page = 0;
+	pos->plane = 0;
+	pos->eraseblock = 0;
+	pos->lun = 0;
+	pos->target++;
+}
+
+/**
+ * nanddev_pos_next_lun() - Move a position to the next LUN
+ * @nand: NAND device
+ * @pos: the position to update
+ *
+ * Updates @pos to point to the start of the next LUN. Useful when you want to
+ * iterate over all LUNs of a NAND device.
+ */
+static inline void nanddev_pos_next_lun(struct nand_device *nand,
+					struct nand_pos *pos)
+{
+	if (pos->lun >= nand->memorg.luns_per_target - 1)
+		return nanddev_pos_next_target(nand, pos);
+
+	pos->lun++;
+	pos->page = 0;
+	pos->plane = 0;
+	pos->eraseblock = 0;
+}
+
+/**
+ * nanddev_pos_next_eraseblock() - Move a position to the next eraseblock
+ * @nand: NAND device
+ * @pos: the position to update
+ *
+ * Updates @pos to point to the start of the next eraseblock. Useful when you
+ * want to iterate over all eraseblocks of a NAND device.
+ */
+static inline void nanddev_pos_next_eraseblock(struct nand_device *nand,
+					       struct nand_pos *pos)
+{
+	if (pos->eraseblock >= nand->memorg.eraseblocks_per_lun - 1)
+		return nanddev_pos_next_lun(nand, pos);
+
+	pos->eraseblock++;
+	pos->page = 0;
+	pos->plane = pos->eraseblock % nand->memorg.planes_per_lun;
+}
+
+/**
+ * nanddev_pos_next_eraseblock() - Move a position to the next page
+ * @nand: NAND device
+ * @pos: the position to update
+ *
+ * Updates @pos to point to the start of the next page. Useful when you want to
+ * iterate over all pages of a NAND device.
+ */
+static inline void nanddev_pos_next_page(struct nand_device *nand,
+					 struct nand_pos *pos)
+{
+	if (pos->page >= nand->memorg.pages_per_eraseblock - 1)
+		return nanddev_pos_next_eraseblock(nand, pos);
+
+	pos->page++;
+}
+
+/**
+ * nand_io_iter_init - Initialize a NAND I/O iterator
+ * @nand: NAND device
+ * @offs: absolute offset
+ * @req: MTD request
+ * @iter: NAND I/O iterator
+ *
+ * Initializes a NAND iterator based on the information passed by the MTD
+ * layer.
+ */
+static inline void nanddev_io_iter_init(struct nand_device *nand,
+					loff_t offs, struct mtd_oob_ops *req,
+					struct nand_io_iter *iter)
+{
+	struct mtd_info *mtd = nanddev_to_mtd(nand);
+
+	iter->req.mode = req->mode;
+	iter->req.dataoffs = nanddev_offs_to_pos(nand, offs, &iter->req.pos);
+	iter->req.ooboffs = req->ooboffs;
+	iter->oobbytes_per_page = mtd_oobavail(mtd, req);
+	iter->dataleft = req->len;
+	iter->oobleft = req->ooblen;
+	iter->req.databuf.in = req->datbuf;
+	iter->req.datalen = min_t(unsigned int,
+				  nand->memorg.pagesize - iter->req.dataoffs,
+				  iter->dataleft);
+	iter->req.oobbuf.in = req->oobbuf;
+	iter->req.ooblen = min_t(unsigned int,
+				 iter->oobbytes_per_page - iter->req.ooboffs,
+				 iter->oobleft);
+}
+
+/**
+ * nand_io_iter_next_page - Move to the next page
+ * @nand: NAND device
+ * @iter: NAND I/O iterator
+ *
+ * Updates the @iter to point to the next page.
+ */
+static inline void nanddev_io_iter_next_page(struct nand_device *nand,
+					     struct nand_io_iter *iter)
+{
+	nanddev_pos_next_page(nand, &iter->req.pos);
+	iter->dataleft -= iter->req.datalen;
+	iter->req.databuf.in += iter->req.datalen;
+	iter->oobleft -= iter->req.ooblen;
+	iter->req.oobbuf.in += iter->req.ooblen;
+	iter->req.dataoffs = 0;
+	iter->req.ooboffs = 0;
+	iter->req.datalen = min_t(unsigned int, nand->memorg.pagesize,
+				  iter->dataleft);
+	iter->req.ooblen = min_t(unsigned int, iter->oobbytes_per_page,
+				 iter->oobleft);
+}
+
+/**
+ * nand_io_iter_end - Should end iteration or not
+ * @nand: NAND device
+ * @iter: NAND I/O iterator
+ *
+ * Check whether @iter has reached the end of the NAND portion it was asked to
+ * iterate on or not.
+ *
+ * Return: true if @iter has reached the end of the iteration request, false
+ *	   otherwise.
+ */
+static inline bool nanddev_io_iter_end(struct nand_device *nand,
+				       const struct nand_io_iter *iter)
+{
+	if (iter->dataleft || iter->oobleft)
+		return false;
+
+	return true;
+}
+
+/**
+ * nand_io_for_each_page - Iterate over all NAND pages contained in an MTD I/O
+ *			   request
+ * @nand: NAND device
+ * @start: start address to read/write from
+ * @req: MTD I/O request
+ * @iter: NAND I/O iterator
+ *
+ * Should be used for iterate over pages that are contained in an MTD request.
+ */
+#define nanddev_io_for_each_page(nand, start, req, iter)		\
+	for (nanddev_io_iter_init(nand, start, req, iter);		\
+	     !nanddev_io_iter_end(nand, iter);				\
+	     nanddev_io_iter_next_page(nand, iter))
+
+bool nanddev_isbad(struct nand_device *nand, const struct nand_pos *pos);
+bool nanddev_isreserved(struct nand_device *nand, const struct nand_pos *pos);
+int nanddev_erase(struct nand_device *nand, const struct nand_pos *pos);
+int nanddev_markbad(struct nand_device *nand, const struct nand_pos *pos);
+
+/* BBT related functions */
+enum nand_bbt_block_status {
+	NAND_BBT_BLOCK_STATUS_UNKNOWN,
+	NAND_BBT_BLOCK_GOOD,
+	NAND_BBT_BLOCK_WORN,
+	NAND_BBT_BLOCK_RESERVED,
+	NAND_BBT_BLOCK_FACTORY_BAD,
+	NAND_BBT_BLOCK_NUM_STATUS,
+};
+
+int nanddev_bbt_init(struct nand_device *nand);
+void nanddev_bbt_cleanup(struct nand_device *nand);
+int nanddev_bbt_update(struct nand_device *nand);
+int nanddev_bbt_get_block_status(const struct nand_device *nand,
+				 unsigned int entry);
+int nanddev_bbt_set_block_status(struct nand_device *nand, unsigned int entry,
+				 enum nand_bbt_block_status status);
+int nanddev_bbt_markbad(struct nand_device *nand, unsigned int block);
+
+/**
+ * nanddev_bbt_pos_to_entry() - Convert a NAND position into a BBT entry
+ * @nand: NAND device
+ * @pos: the NAND position we want to get BBT entry for
+ *
+ * Return the BBT entry used to store information about the eraseblock pointed
+ * by @pos.
+ *
+ * Return: the BBT entry storing information about eraseblock pointed by @pos.
+ */
+static inline unsigned int nanddev_bbt_pos_to_entry(struct nand_device *nand,
+						    const struct nand_pos *pos)
+{
+	return pos->eraseblock +
+	       ((pos->lun + (pos->target * nand->memorg.luns_per_target)) *
+		nand->memorg.eraseblocks_per_lun);
+}
+
+/**
+ * nanddev_bbt_is_initialized() - Check if the BBT has been initialized
+ * @nand: NAND device
+ *
+ * Return: true if the BBT has been initialized, false otherwise.
+ */
+static inline bool nanddev_bbt_is_initialized(struct nand_device *nand)
+{
+	return !!nand->bbt.cache;
+}
+
+/* MTD -> NAND helper functions. */
+int nanddev_mtd_erase(struct mtd_info *mtd, struct erase_info *einfo);
+
+#endif /* __LINUX_MTD_NAND_H */

include/linux/mtd/partitions.h

@@ -81,10 +81,30 @@ extern void register_mtd_parser(struct mtd_part_parser *parser);
 extern void deregister_mtd_parser(struct mtd_part_parser *parser);
 #endif
 
-int mtd_is_partition(const struct mtd_info *mtd);
 int mtd_add_partition(struct mtd_info *master, const char *name,
 		      long long offset, long long length);
 int mtd_del_partition(struct mtd_info *master, int partno);
 uint64_t mtd_get_device_size(const struct mtd_info *mtd);
 
+#if defined(CONFIG_MTD_PARTITIONS)
+int mtd_parse_partitions(struct mtd_info *parent, const char **_mtdparts,
+			 struct mtd_partition **_parts, int *_nparts);
+void mtd_free_parsed_partitions(struct mtd_partition *parts,
+				unsigned int nparts);
+#else
+static inline int
+mtd_parse_partitions(struct mtd_info *parent, const char **_mtdparts,
+		     struct mtd_partition **_parts, int *_nparts)
+{
+	*_nparts = 0;
+
+	return 0;
+}
+static inline void
+mtd_free_parsed_partitions(struct mtd_partition *parts, unsigned int nparts)
+{
+	return;
+}
+#endif /* defined(MTD_PARTITIONS) */
+
 #endif

include/linux/mtd/spinand.h

@@ -0,0 +1,432 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2016-2017 Micron Technology, Inc.
+ *
+ *  Authors:
+ *	Peter Pan <peterpandong@micron.com>
+ */
+#ifndef __LINUX_MTD_SPINAND_H
+#define __LINUX_MTD_SPINAND_H
+
+#ifndef __UBOOT__
+#include <linux/mutex.h>
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/spi-mem.h>
+#else
+#include <common.h>
+#include <spi.h>
+#include <spi-mem.h>
+#include <linux/mtd/nand.h>
+#endif
+
+/**
+ * Standard SPI NAND flash operations
+ */
+
+#define SPINAND_RESET_OP						\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0xff, 1),				\
+		   SPI_MEM_OP_NO_ADDR,					\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_NO_DATA)
+
+#define SPINAND_WR_EN_DIS_OP(enable)					\
+	SPI_MEM_OP(SPI_MEM_OP_CMD((enable) ? 0x06 : 0x04, 1),		\
+		   SPI_MEM_OP_NO_ADDR,					\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_NO_DATA)
+
+#define SPINAND_READID_OP(ndummy, buf, len)				\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0x9f, 1),				\
+		   SPI_MEM_OP_NO_ADDR,					\
+		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
+		   SPI_MEM_OP_DATA_IN(len, buf, 1))
+
+#define SPINAND_SET_FEATURE_OP(reg, valptr)				\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0x1f, 1),				\
+		   SPI_MEM_OP_ADDR(1, reg, 1),				\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_DATA_OUT(1, valptr, 1))
+
+#define SPINAND_GET_FEATURE_OP(reg, valptr)				\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0x0f, 1),				\
+		   SPI_MEM_OP_ADDR(1, reg, 1),				\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_DATA_IN(1, valptr, 1))
+
+#define SPINAND_BLK_ERASE_OP(addr)					\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0xd8, 1),				\
+		   SPI_MEM_OP_ADDR(3, addr, 1),				\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_NO_DATA)
+
+#define SPINAND_PAGE_READ_OP(addr)					\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0x13, 1),				\
+		   SPI_MEM_OP_ADDR(3, addr, 1),				\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_NO_DATA)
+
+#define SPINAND_PAGE_READ_FROM_CACHE_OP(fast, addr, ndummy, buf, len)	\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(fast ? 0x0b : 0x03, 1),		\
+		   SPI_MEM_OP_ADDR(2, addr, 1),				\
+		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
+		   SPI_MEM_OP_DATA_IN(len, buf, 1))
+
+#define SPINAND_PAGE_READ_FROM_CACHE_X2_OP(addr, ndummy, buf, len)	\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0x3b, 1),				\
+		   SPI_MEM_OP_ADDR(2, addr, 1),				\
+		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
+		   SPI_MEM_OP_DATA_IN(len, buf, 2))
+
+#define SPINAND_PAGE_READ_FROM_CACHE_X4_OP(addr, ndummy, buf, len)	\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0x6b, 1),				\
+		   SPI_MEM_OP_ADDR(2, addr, 1),				\
+		   SPI_MEM_OP_DUMMY(ndummy, 1),				\
+		   SPI_MEM_OP_DATA_IN(len, buf, 4))
+
+#define SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(addr, ndummy, buf, len)	\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0xbb, 1),				\
+		   SPI_MEM_OP_ADDR(2, addr, 2),				\
+		   SPI_MEM_OP_DUMMY(ndummy, 2),				\
+		   SPI_MEM_OP_DATA_IN(len, buf, 2))
+
+#define SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(addr, ndummy, buf, len)	\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0xeb, 1),				\
+		   SPI_MEM_OP_ADDR(2, addr, 4),				\
+		   SPI_MEM_OP_DUMMY(ndummy, 4),				\
+		   SPI_MEM_OP_DATA_IN(len, buf, 4))
+
+#define SPINAND_PROG_EXEC_OP(addr)					\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(0x10, 1),				\
+		   SPI_MEM_OP_ADDR(3, addr, 1),				\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_NO_DATA)
+
+#define SPINAND_PROG_LOAD(reset, addr, buf, len)			\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(reset ? 0x02 : 0x84, 1),		\
+		   SPI_MEM_OP_ADDR(2, addr, 1),				\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_DATA_OUT(len, buf, 1))
+
+#define SPINAND_PROG_LOAD_X4(reset, addr, buf, len)			\
+	SPI_MEM_OP(SPI_MEM_OP_CMD(reset ? 0x32 : 0x34, 1),		\
+		   SPI_MEM_OP_ADDR(2, addr, 1),				\
+		   SPI_MEM_OP_NO_DUMMY,					\
+		   SPI_MEM_OP_DATA_OUT(len, buf, 4))
+
+/**
+ * Standard SPI NAND flash commands
+ */
+#define SPINAND_CMD_PROG_LOAD_X4		0x32
+#define SPINAND_CMD_PROG_LOAD_RDM_DATA_X4	0x34
+
+/* feature register */
+#define REG_BLOCK_LOCK		0xa0
+#define BL_ALL_UNLOCKED		0x00
+
+/* configuration register */
+#define REG_CFG			0xb0
+#define CFG_OTP_ENABLE		BIT(6)
+#define CFG_ECC_ENABLE		BIT(4)
+#define CFG_QUAD_ENABLE		BIT(0)
+
+/* status register */
+#define REG_STATUS		0xc0
+#define STATUS_BUSY		BIT(0)
+#define STATUS_ERASE_FAILED	BIT(2)
+#define STATUS_PROG_FAILED	BIT(3)
+#define STATUS_ECC_MASK		GENMASK(5, 4)
+#define STATUS_ECC_NO_BITFLIPS	(0 << 4)
+#define STATUS_ECC_HAS_BITFLIPS	(1 << 4)
+#define STATUS_ECC_UNCOR_ERROR	(2 << 4)
+
+struct spinand_op;
+struct spinand_device;
+
+#define SPINAND_MAX_ID_LEN	4
+
+/**
+ * struct spinand_id - SPI NAND id structure
+ * @data: buffer containing the id bytes. Currently 4 bytes large, but can
+ *	  be extended if required
+ * @len: ID length
+ *
+ * struct_spinand_id->data contains all bytes returned after a READ_ID command,
+ * including dummy bytes if the chip does not emit ID bytes right after the
+ * READ_ID command. The responsibility to extract real ID bytes is left to
+ * struct_manufacurer_ops->detect().
+ */
+struct spinand_id {
+	u8 data[SPINAND_MAX_ID_LEN];
+	int len;
+};
+
+/**
+ * struct manufacurer_ops - SPI NAND manufacturer specific operations
+ * @detect: detect a SPI NAND device. Every time a SPI NAND device is probed
+ *	    the core calls the struct_manufacurer_ops->detect() hook of each
+ *	    registered manufacturer until one of them return 1. Note that
+ *	    the first thing to check in this hook is that the manufacturer ID
+ *	    in struct_spinand_device->id matches the manufacturer whose
+ *	    ->detect() hook has been called. Should return 1 if there's a
+ *	    match, 0 if the manufacturer ID does not match and a negative
+ *	    error code otherwise. When true is returned, the core assumes
+ *	    that properties of the NAND chip (spinand->base.memorg and
+ *	    spinand->base.eccreq) have been filled
+ * @init: initialize a SPI NAND device
+ * @cleanup: cleanup a SPI NAND device
+ *
+ * Each SPI NAND manufacturer driver should implement this interface so that
+ * NAND chips coming from this vendor can be detected and initialized properly.
+ */
+struct spinand_manufacturer_ops {
+	int (*detect)(struct spinand_device *spinand);
+	int (*init)(struct spinand_device *spinand);
+	void (*cleanup)(struct spinand_device *spinand);
+};
+
+/**
+ * struct spinand_manufacturer - SPI NAND manufacturer instance
+ * @id: manufacturer ID
+ * @name: manufacturer name
+ * @ops: manufacturer operations
+ */
+struct spinand_manufacturer {
+	u8 id;
+	char *name;
+	const struct spinand_manufacturer_ops *ops;
+};
+
+/* SPI NAND manufacturers */
+extern const struct spinand_manufacturer macronix_spinand_manufacturer;
+extern const struct spinand_manufacturer micron_spinand_manufacturer;
+extern const struct spinand_manufacturer winbond_spinand_manufacturer;
+
+/**
+ * struct spinand_op_variants - SPI NAND operation variants
+ * @ops: the list of variants for a given operation
+ * @nops: the number of variants
+ *
+ * Some operations like read-from-cache/write-to-cache have several variants
+ * depending on the number of IO lines you use to transfer data or address
+ * cycles. This structure is a way to describe the different variants supported
+ * by a chip and let the core pick the best one based on the SPI mem controller
+ * capabilities.
+ */
+struct spinand_op_variants {
+	const struct spi_mem_op *ops;
+	unsigned int nops;
+};
+
+#define SPINAND_OP_VARIANTS(name, ...)					\
+	const struct spinand_op_variants name = {			\
+		.ops = (struct spi_mem_op[]) { __VA_ARGS__ },		\
+		.nops = sizeof((struct spi_mem_op[]){ __VA_ARGS__ }) /	\
+			sizeof(struct spi_mem_op),			\
+	}
+
+/**
+ * spinand_ecc_info - description of the on-die ECC implemented by a SPI NAND
+ *		      chip
+ * @get_status: get the ECC status. Should return a positive number encoding
+ *		the number of corrected bitflips if correction was possible or
+ *		-EBADMSG if there are uncorrectable errors. I can also return
+ *		other negative error codes if the error is not caused by
+ *		uncorrectable bitflips
+ * @ooblayout: the OOB layout used by the on-die ECC implementation
+ */
+struct spinand_ecc_info {
+	int (*get_status)(struct spinand_device *spinand, u8 status);
+	const struct mtd_ooblayout_ops *ooblayout;
+};
+
+#define SPINAND_HAS_QE_BIT		BIT(0)
+
+/**
+ * struct spinand_info - Structure used to describe SPI NAND chips
+ * @model: model name
+ * @devid: device ID
+ * @flags: OR-ing of the SPINAND_XXX flags
+ * @memorg: memory organization
+ * @eccreq: ECC requirements
+ * @eccinfo: on-die ECC info
+ * @op_variants: operations variants
+ * @op_variants.read_cache: variants of the read-cache operation
+ * @op_variants.write_cache: variants of the write-cache operation
+ * @op_variants.update_cache: variants of the update-cache operation
+ * @select_target: function used to select a target/die. Required only for
+ *		   multi-die chips
+ *
+ * Each SPI NAND manufacturer driver should have a spinand_info table
+ * describing all the chips supported by the driver.
+ */
+struct spinand_info {
+	const char *model;
+	u8 devid;
+	u32 flags;
+	struct nand_memory_organization memorg;
+	struct nand_ecc_req eccreq;
+	struct spinand_ecc_info eccinfo;
+	struct {
+		const struct spinand_op_variants *read_cache;
+		const struct spinand_op_variants *write_cache;
+		const struct spinand_op_variants *update_cache;
+	} op_variants;
+	int (*select_target)(struct spinand_device *spinand,
+			     unsigned int target);
+};
+
+#define SPINAND_INFO_OP_VARIANTS(__read, __write, __update)		\
+	{								\
+		.read_cache = __read,					\
+		.write_cache = __write,					\
+		.update_cache = __update,				\
+	}
+
+#define SPINAND_ECCINFO(__ooblayout, __get_status)			\
+	.eccinfo = {							\
+		.ooblayout = __ooblayout,				\
+		.get_status = __get_status,				\
+	}
+
+#define SPINAND_SELECT_TARGET(__func)					\
+	.select_target = __func,
+
+#define SPINAND_INFO(__model, __id, __memorg, __eccreq, __op_variants,	\
+		     __flags, ...)					\
+	{								\
+		.model = __model,					\
+		.devid = __id,						\
+		.memorg = __memorg,					\
+		.eccreq = __eccreq,					\
+		.op_variants = __op_variants,				\
+		.flags = __flags,					\
+		__VA_ARGS__						\
+	}
+
+/**
+ * struct spinand_device - SPI NAND device instance
+ * @base: NAND device instance
+ * @slave: pointer to the SPI slave object
+ * @lock: lock used to serialize accesses to the NAND
+ * @id: NAND ID as returned by READ_ID
+ * @flags: NAND flags
+ * @op_templates: various SPI mem op templates
+ * @op_templates.read_cache: read cache op template
+ * @op_templates.write_cache: write cache op template
+ * @op_templates.update_cache: update cache op template
+ * @select_target: select a specific target/die. Usually called before sending
+ *		   a command addressing a page or an eraseblock embedded in
+ *		   this die. Only required if your chip exposes several dies
+ * @cur_target: currently selected target/die
+ * @eccinfo: on-die ECC information
+ * @cfg_cache: config register cache. One entry per die
+ * @databuf: bounce buffer for data
+ * @oobbuf: bounce buffer for OOB data
+ * @scratchbuf: buffer used for everything but page accesses. This is needed
+ *		because the spi-mem interface explicitly requests that buffers
+ *		passed in spi_mem_op be DMA-able, so we can't based the bufs on
+ *		the stack
+ * @manufacturer: SPI NAND manufacturer information
+ * @priv: manufacturer private data
+ */
+struct spinand_device {
+	struct nand_device base;
+#ifndef __UBOOT__
+	struct spi_mem *spimem;
+	struct mutex lock;
+#else
+	struct spi_slave *slave;
+#endif
+	struct spinand_id id;
+	u32 flags;
+
+	struct {
+		const struct spi_mem_op *read_cache;
+		const struct spi_mem_op *write_cache;
+		const struct spi_mem_op *update_cache;
+	} op_templates;
+
+	int (*select_target)(struct spinand_device *spinand,
+			     unsigned int target);
+	unsigned int cur_target;
+
+	struct spinand_ecc_info eccinfo;
+
+	u8 *cfg_cache;
+	u8 *databuf;
+	u8 *oobbuf;
+	u8 *scratchbuf;
+	const struct spinand_manufacturer *manufacturer;
+	void *priv;
+};
+
+/**
+ * mtd_to_spinand() - Get the SPI NAND device attached to an MTD instance
+ * @mtd: MTD instance
+ *
+ * Return: the SPI NAND device attached to @mtd.
+ */
+static inline struct spinand_device *mtd_to_spinand(struct mtd_info *mtd)
+{
+	return container_of(mtd_to_nanddev(mtd), struct spinand_device, base);
+}
+
+/**
+ * spinand_to_mtd() - Get the MTD device embedded in a SPI NAND device
+ * @spinand: SPI NAND device
+ *
+ * Return: the MTD device embedded in @spinand.
+ */
+static inline struct mtd_info *spinand_to_mtd(struct spinand_device *spinand)
+{
+	return nanddev_to_mtd(&spinand->base);
+}
+
+/**
+ * nand_to_spinand() - Get the SPI NAND device embedding an NAND object
+ * @nand: NAND object
+ *
+ * Return: the SPI NAND device embedding @nand.
+ */
+static inline struct spinand_device *nand_to_spinand(struct nand_device *nand)
+{
+	return container_of(nand, struct spinand_device, base);
+}
+
+/**
+ * spinand_to_nand() - Get the NAND device embedded in a SPI NAND object
+ * @spinand: SPI NAND device
+ *
+ * Return: the NAND device embedded in @spinand.
+ */
+static inline struct nand_device *
+spinand_to_nand(struct spinand_device *spinand)
+{
+	return &spinand->base;
+}
+
+/**
+ * spinand_set_of_node - Attach a DT node to a SPI NAND device
+ * @spinand: SPI NAND device
+ * @np: DT node
+ *
+ * Attach a DT node to a SPI NAND device.
+ */
+static inline void spinand_set_of_node(struct spinand_device *spinand,
+				       const struct device_node *np)
+{
+	nanddev_set_of_node(&spinand->base, np);
+}
+
+int spinand_match_and_init(struct spinand_device *dev,
+			   const struct spinand_info *table,
+			   unsigned int table_size, u8 devid);
+
+int spinand_upd_cfg(struct spinand_device *spinand, u8 mask, u8 val);
+int spinand_select_target(struct spinand_device *spinand, unsigned int target);
+
+#endif /* __LINUX_MTD_SPINAND_H */