mirror of
https://github.com/smaeul/u-boot.git
synced 2025-11-04 05:50:17 +00:00
imx6ul/imx6ull: synchronise device trees with linux
Synchronise device trees with linux v5.19-rc5. Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
This commit is contained in:
Marcel Ziswiler
Stefano Babic
parent
091a03f8f3
commit
5d7a95f499
@ -3,10 +3,6 @@
|
|||||||
// Copyright (C) 2015 Freescale Semiconductor, Inc.
|
// Copyright (C) 2015 Freescale Semiconductor, Inc.
|
||||||
|
|
||||||
/ {
|
/ {
|
||||||
aliases {
|
|
||||||
spi5 = &{/spi4};
|
|
||||||
};
|
|
||||||
|
|
||||||
chosen {
|
chosen {
|
||||||
stdout-path = &uart1;
|
stdout-path = &uart1;
|
||||||
};
|
};
|
||||||
@ -34,6 +30,28 @@
|
|||||||
enable-active-high;
|
enable-active-high;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
reg_peri_3v3: regulator-peri-3v3 {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_peri_3v3>;
|
||||||
|
regulator-name = "VPERI_3V3";
|
||||||
|
regulator-min-microvolt = <3300000>;
|
||||||
|
regulator-max-microvolt = <3300000>;
|
||||||
|
gpio = <&gpio5 2 GPIO_ACTIVE_LOW>;
|
||||||
|
/*
|
||||||
|
* If you want to want to make this dynamic please
|
||||||
|
* check schematics and test all affected peripherals:
|
||||||
|
*
|
||||||
|
* - sensors
|
||||||
|
* - ethernet phy
|
||||||
|
* - can
|
||||||
|
* - bluetooth
|
||||||
|
* - wm8960 audio codec
|
||||||
|
* - ov5640 camera
|
||||||
|
*/
|
||||||
|
regulator-always-on;
|
||||||
|
};
|
||||||
|
|
||||||
reg_can_3v3: regulator-can-3v3 {
|
reg_can_3v3: regulator-can-3v3 {
|
||||||
compatible = "regulator-fixed";
|
compatible = "regulator-fixed";
|
||||||
regulator-name = "can-3v3";
|
regulator-name = "can-3v3";
|
||||||
@ -42,6 +60,28 @@
|
|||||||
gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
|
gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
sound-wm8960 {
|
||||||
|
compatible = "fsl,imx-audio-wm8960";
|
||||||
|
model = "wm8960-audio";
|
||||||
|
audio-cpu = <&sai2>;
|
||||||
|
audio-codec = <&codec>;
|
||||||
|
audio-asrc = <&asrc>;
|
||||||
|
hp-det-gpio = <&gpio5 4 0>;
|
||||||
|
audio-routing =
|
||||||
|
"Headphone Jack", "HP_L",
|
||||||
|
"Headphone Jack", "HP_R",
|
||||||
|
"Ext Spk", "SPK_LP",
|
||||||
|
"Ext Spk", "SPK_LN",
|
||||||
|
"Ext Spk", "SPK_RP",
|
||||||
|
"Ext Spk", "SPK_RN",
|
||||||
|
"LINPUT2", "Mic Jack",
|
||||||
|
"LINPUT3", "Mic Jack",
|
||||||
|
"RINPUT1", "AMIC",
|
||||||
|
"RINPUT2", "AMIC",
|
||||||
|
"Mic Jack", "MICB",
|
||||||
|
"AMIC", "MICB";
|
||||||
|
};
|
||||||
|
|
||||||
spi4 {
|
spi4 {
|
||||||
compatible = "spi-gpio";
|
compatible = "spi-gpio";
|
||||||
pinctrl-names = "default";
|
pinctrl-names = "default";
|
||||||
@ -49,7 +89,7 @@
|
|||||||
status = "okay";
|
status = "okay";
|
||||||
gpio-sck = <&gpio5 11 0>;
|
gpio-sck = <&gpio5 11 0>;
|
||||||
gpio-mosi = <&gpio5 10 0>;
|
gpio-mosi = <&gpio5 10 0>;
|
||||||
cs-gpios = <&gpio5 7 0>;
|
cs-gpios = <&gpio5 7 GPIO_ACTIVE_LOW>;
|
||||||
num-chipselects = <1>;
|
num-chipselects = <1>;
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
#size-cells = <0>;
|
#size-cells = <0>;
|
||||||
@ -61,6 +101,7 @@
|
|||||||
reg = <0>;
|
reg = <0>;
|
||||||
registers-number = <1>;
|
registers-number = <1>;
|
||||||
spi-max-frequency = <100000>;
|
spi-max-frequency = <100000>;
|
||||||
|
enable-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
@ -82,7 +123,7 @@
|
|||||||
};
|
};
|
||||||
|
|
||||||
&i2c2 {
|
&i2c2 {
|
||||||
clock_frequency = <100000>;
|
clock-frequency = <100000>;
|
||||||
pinctrl-names = "default";
|
pinctrl-names = "default";
|
||||||
pinctrl-0 = <&pinctrl_i2c2>;
|
pinctrl-0 = <&pinctrl_i2c2>;
|
||||||
status = "okay";
|
status = "okay";
|
||||||
@ -92,6 +133,45 @@
|
|||||||
compatible = "wlf,wm8960";
|
compatible = "wlf,wm8960";
|
||||||
reg = <0x1a>;
|
reg = <0x1a>;
|
||||||
wlf,shared-lrclk;
|
wlf,shared-lrclk;
|
||||||
|
wlf,hp-cfg = <3 2 3>;
|
||||||
|
wlf,gpio-cfg = <1 3>;
|
||||||
|
clocks = <&clks IMX6UL_CLK_SAI2>;
|
||||||
|
clock-names = "mclk";
|
||||||
|
};
|
||||||
|
|
||||||
|
camera@3c {
|
||||||
|
compatible = "ovti,ov5640";
|
||||||
|
reg = <0x3c>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_camera_clock>;
|
||||||
|
clocks = <&clks IMX6UL_CLK_CSI>;
|
||||||
|
clock-names = "xclk";
|
||||||
|
powerdown-gpios = <&gpio_spi 6 GPIO_ACTIVE_HIGH>;
|
||||||
|
reset-gpios = <&gpio_spi 5 GPIO_ACTIVE_LOW>;
|
||||||
|
|
||||||
|
port {
|
||||||
|
ov5640_to_parallel: endpoint {
|
||||||
|
remote-endpoint = <¶llel_from_ov5640>;
|
||||||
|
bus-width = <8>;
|
||||||
|
data-shift = <2>; /* lines 9:2 are used */
|
||||||
|
hsync-active = <0>;
|
||||||
|
vsync-active = <0>;
|
||||||
|
pclk-sample = <1>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&csi {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_csi1>;
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
port {
|
||||||
|
parallel_from_ov5640: endpoint {
|
||||||
|
remote-endpoint = <&ov5640_to_parallel>;
|
||||||
|
bus-type = <5>; /* Parallel bus */
|
||||||
|
};
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
@ -100,6 +180,7 @@
|
|||||||
pinctrl-0 = <&pinctrl_enet1>;
|
pinctrl-0 = <&pinctrl_enet1>;
|
||||||
phy-mode = "rmii";
|
phy-mode = "rmii";
|
||||||
phy-handle = <ðphy0>;
|
phy-handle = <ðphy0>;
|
||||||
|
phy-supply = <®_peri_3v3>;
|
||||||
status = "okay";
|
status = "okay";
|
||||||
};
|
};
|
||||||
|
|
||||||
@ -108,6 +189,7 @@
|
|||||||
pinctrl-0 = <&pinctrl_enet2>;
|
pinctrl-0 = <&pinctrl_enet2>;
|
||||||
phy-mode = "rmii";
|
phy-mode = "rmii";
|
||||||
phy-handle = <ðphy1>;
|
phy-handle = <ðphy1>;
|
||||||
|
phy-supply = <®_peri_3v3>;
|
||||||
status = "okay";
|
status = "okay";
|
||||||
|
|
||||||
mdio {
|
mdio {
|
||||||
@ -115,13 +197,16 @@
|
|||||||
#size-cells = <0>;
|
#size-cells = <0>;
|
||||||
|
|
||||||
ethphy0: ethernet-phy@2 {
|
ethphy0: ethernet-phy@2 {
|
||||||
|
compatible = "ethernet-phy-id0022.1560";
|
||||||
reg = <2>;
|
reg = <2>;
|
||||||
micrel,led-mode = <1>;
|
micrel,led-mode = <1>;
|
||||||
clocks = <&clks IMX6UL_CLK_ENET_REF>;
|
clocks = <&clks IMX6UL_CLK_ENET_REF>;
|
||||||
clock-names = "rmii-ref";
|
clock-names = "rmii-ref";
|
||||||
|
|
||||||
};
|
};
|
||||||
|
|
||||||
ethphy1: ethernet-phy@1 {
|
ethphy1: ethernet-phy@1 {
|
||||||
|
compatible = "ethernet-phy-id0022.1560";
|
||||||
reg = <1>;
|
reg = <1>;
|
||||||
micrel,led-mode = <1>;
|
micrel,led-mode = <1>;
|
||||||
clocks = <&clks IMX6UL_CLK_ENET2_REF>;
|
clocks = <&clks IMX6UL_CLK_ENET2_REF>;
|
||||||
@ -144,18 +229,33 @@
|
|||||||
status = "okay";
|
status = "okay";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
&gpio_spi {
|
||||||
|
eth0-phy-hog {
|
||||||
|
gpio-hog;
|
||||||
|
gpios = <1 GPIO_ACTIVE_HIGH>;
|
||||||
|
output-high;
|
||||||
|
line-name = "eth0-phy";
|
||||||
|
};
|
||||||
|
|
||||||
|
eth1-phy-hog {
|
||||||
|
gpio-hog;
|
||||||
|
gpios = <2 GPIO_ACTIVE_HIGH>;
|
||||||
|
output-high;
|
||||||
|
line-name = "eth1-phy";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
&i2c1 {
|
&i2c1 {
|
||||||
clock-frequency = <100000>;
|
clock-frequency = <100000>;
|
||||||
pinctrl-names = "default", "gpio";
|
pinctrl-names = "default";
|
||||||
pinctrl-0 = <&pinctrl_i2c1>;
|
pinctrl-0 = <&pinctrl_i2c1>;
|
||||||
pinctrl-1 = <&pinctrl_i2c1_gpio>;
|
|
||||||
scl-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
|
|
||||||
sda-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
|
|
||||||
status = "okay";
|
status = "okay";
|
||||||
|
|
||||||
mag3110@e {
|
magnetometer@e {
|
||||||
compatible = "fsl,mag3110";
|
compatible = "fsl,mag3110";
|
||||||
reg = <0x0e>;
|
reg = <0x0e>;
|
||||||
|
vdd-supply = <®_peri_3v3>;
|
||||||
|
vddio-supply = <®_peri_3v3>;
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
@ -175,6 +275,7 @@
|
|||||||
};
|
};
|
||||||
|
|
||||||
&pwm1 {
|
&pwm1 {
|
||||||
|
#pwm-cells = <2>;
|
||||||
pinctrl-names = "default";
|
pinctrl-names = "default";
|
||||||
pinctrl-0 = <&pinctrl_pwm1>;
|
pinctrl-0 = <&pinctrl_pwm1>;
|
||||||
status = "okay";
|
status = "okay";
|
||||||
@ -185,13 +286,13 @@
|
|||||||
pinctrl-0 = <&pinctrl_qspi>;
|
pinctrl-0 = <&pinctrl_qspi>;
|
||||||
status = "okay";
|
status = "okay";
|
||||||
|
|
||||||
flash0: n25q256a@0 {
|
flash0: flash@0 {
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
#size-cells = <1>;
|
#size-cells = <1>;
|
||||||
compatible = "micron,n25q256a";
|
compatible = "micron,n25q256a", "jedec,spi-nor";
|
||||||
spi-max-frequency = <29000000>;
|
spi-max-frequency = <29000000>;
|
||||||
spi-rx-bus-width = <4>;
|
spi-rx-bus-width = <4>;
|
||||||
spi-tx-bus-width = <4>;
|
spi-tx-bus-width = <1>;
|
||||||
reg = <0>;
|
reg = <0>;
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
@ -211,6 +312,10 @@
|
|||||||
status = "okay";
|
status = "okay";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
&snvs_pwrkey {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
&tsc {
|
&tsc {
|
||||||
pinctrl-names = "default";
|
pinctrl-names = "default";
|
||||||
pinctrl-0 = <&pinctrl_tsc>;
|
pinctrl-0 = <&pinctrl_tsc>;
|
||||||
@ -235,6 +340,8 @@
|
|||||||
|
|
||||||
&usbotg1 {
|
&usbotg1 {
|
||||||
dr_mode = "otg";
|
dr_mode = "otg";
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_usb_otg1>;
|
||||||
status = "okay";
|
status = "okay";
|
||||||
};
|
};
|
||||||
|
|
||||||
@ -283,9 +390,14 @@
|
|||||||
&iomuxc {
|
&iomuxc {
|
||||||
pinctrl-names = "default";
|
pinctrl-names = "default";
|
||||||
|
|
||||||
pinctrl_csi1: csi1grp {
|
pinctrl_camera_clock: cameraclockgrp {
|
||||||
fsl,pins = <
|
fsl,pins = <
|
||||||
MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
|
MX6UL_PAD_CSI_MCLK__CSI_MCLK 0x1b088
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_csi1: csi1grp {
|
||||||
|
fsl,pins = <
|
||||||
MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
|
MX6UL_PAD_CSI_PIXCLK__CSI_PIXCLK 0x1b088
|
||||||
MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
|
MX6UL_PAD_CSI_VSYNC__CSI_VSYNC 0x1b088
|
||||||
MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x1b088
|
MX6UL_PAD_CSI_HSYNC__CSI_HSYNC 0x1b088
|
||||||
@ -349,13 +461,6 @@
|
|||||||
>;
|
>;
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_i2c1_gpio: i2c1grp_gpio {
|
|
||||||
fsl,pins = <
|
|
||||||
MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x1b8b0
|
|
||||||
MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x1b8b0
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
|
|
||||||
pinctrl_i2c2: i2c2grp {
|
pinctrl_i2c2: i2c2grp {
|
||||||
fsl,pins = <
|
fsl,pins = <
|
||||||
MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
|
MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
|
||||||
@ -425,6 +530,12 @@
|
|||||||
>;
|
>;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
pinctrl_peri_3v3: peri3v3grp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
pinctrl_pwm1: pwm1grp {
|
pinctrl_pwm1: pwm1grp {
|
||||||
fsl,pins = <
|
fsl,pins = <
|
||||||
MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0
|
MX6UL_PAD_GPIO1_IO08__PWM1_OUT 0x110b0
|
||||||
@ -476,6 +587,12 @@
|
|||||||
>;
|
>;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
pinctrl_usb_otg1: usbotg1grp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x17059
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
pinctrl_usdhc1: usdhc1grp {
|
pinctrl_usdhc1: usdhc1grp {
|
||||||
fsl,pins = <
|
fsl,pins = <
|
||||||
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
|
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
|
||||||
|
|||||||
@ -1,43 +1,7 @@
|
|||||||
|
// SPDX-License-Identifier: GPL-2.0 OR X11
|
||||||
/*
|
/*
|
||||||
* Copyright (C) 2016 Amarula Solutions B.V.
|
* Copyright (C) 2016 Amarula Solutions B.V.
|
||||||
* Copyright (C) 2016 Engicam S.r.l.
|
* Copyright (C) 2016 Engicam S.r.l.
|
||||||
*
|
|
||||||
* This file is dual-licensed: you can use it either under the terms
|
|
||||||
* of the GPL or the X11 license, at your option. Note that this dual
|
|
||||||
* licensing only applies to this file, and not this project as a
|
|
||||||
* whole.
|
|
||||||
*
|
|
||||||
* a) This file is free software; you can redistribute it and/or
|
|
||||||
* modify it under the terms of the GNU General Public License
|
|
||||||
* version 2 as published by the Free Software Foundation.
|
|
||||||
*
|
|
||||||
* This file is distributed in the hope that it will be useful
|
|
||||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
* GNU General Public License for more details.
|
|
||||||
*
|
|
||||||
* Or, alternatively
|
|
||||||
*
|
|
||||||
* b) Permission is hereby granted, free of charge, to any person
|
|
||||||
* obtaining a copy of this software and associated documentation
|
|
||||||
* files (the "Software"), to deal in the Software without
|
|
||||||
* restriction, including without limitation the rights to use
|
|
||||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
||||||
* sell copies of the Software, and to permit persons to whom the
|
|
||||||
* Software is furnished to do so, subject to the following
|
|
||||||
* conditions:
|
|
||||||
*
|
|
||||||
* The above copyright notice and this permission notice shall be
|
|
||||||
* included in all copies or substantial portions of the Software.
|
|
||||||
*
|
|
||||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
|
|
||||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
||||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
||||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
||||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
|
|
||||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
||||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
||||||
* OTHER DEALINGS IN THE SOFTWARE.
|
|
||||||
*/
|
*/
|
||||||
|
|
||||||
/dts-v1/;
|
/dts-v1/;
|
||||||
@ -47,22 +11,129 @@
|
|||||||
#include "imx6ul.dtsi"
|
#include "imx6ul.dtsi"
|
||||||
|
|
||||||
/ {
|
/ {
|
||||||
model = "Engicam GEAM6UL";
|
model = "Engicam GEAM6UL Starter Kit";
|
||||||
compatible = "engicam,imx6ul-geam", "fsl,imx6ul";
|
compatible = "engicam,imx6ul-geam", "fsl,imx6ul";
|
||||||
|
|
||||||
memory {
|
memory@80000000 {
|
||||||
|
device_type = "memory";
|
||||||
reg = <0x80000000 0x08000000>;
|
reg = <0x80000000 0x08000000>;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
backlight {
|
||||||
|
compatible = "pwm-backlight";
|
||||||
|
pwms = <&pwm8 0 100000>;
|
||||||
|
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
|
||||||
|
10 11 12 13 14 15 16 17 18 19
|
||||||
|
20 21 22 23 24 25 26 27 28 29
|
||||||
|
30 31 32 33 34 35 36 37 38 39
|
||||||
|
40 41 42 43 44 45 46 47 48 49
|
||||||
|
50 51 52 53 54 55 56 57 58 59
|
||||||
|
60 61 62 63 64 65 66 67 68 69
|
||||||
|
70 71 72 73 74 75 76 77 78 79
|
||||||
|
80 81 82 83 84 85 86 87 88 89
|
||||||
|
90 91 92 93 94 95 96 97 98 99
|
||||||
|
100>;
|
||||||
|
default-brightness-level = <100>;
|
||||||
|
};
|
||||||
|
|
||||||
chosen {
|
chosen {
|
||||||
stdout-path = &uart1;
|
stdout-path = &uart1;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
reg_1p8v: regulator-1p8v {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
regulator-name = "1P8V";
|
||||||
|
regulator-min-microvolt = <1800000>;
|
||||||
|
regulator-max-microvolt = <1800000>;
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-boot-on;
|
||||||
|
};
|
||||||
|
|
||||||
|
reg_3p3v: regulator-3p3v {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
regulator-name = "3P3V";
|
||||||
|
regulator-min-microvolt = <3300000>;
|
||||||
|
regulator-max-microvolt = <3300000>;
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-boot-on;
|
||||||
|
};
|
||||||
|
|
||||||
|
sound {
|
||||||
|
compatible = "simple-audio-card";
|
||||||
|
simple-audio-card,name = "imx6ul-geam-sgtl5000";
|
||||||
|
simple-audio-card,format = "i2s";
|
||||||
|
simple-audio-card,bitclock-master = <&dailink_master>;
|
||||||
|
simple-audio-card,frame-master = <&dailink_master>;
|
||||||
|
simple-audio-card,widgets =
|
||||||
|
"Microphone", "Mic Jack",
|
||||||
|
"Line", "Line In",
|
||||||
|
"Line", "Line Out",
|
||||||
|
"Headphone", "Headphone Jack";
|
||||||
|
simple-audio-card,routing =
|
||||||
|
"MIC_IN", "Mic Jack",
|
||||||
|
"Mic Jack", "Mic Bias",
|
||||||
|
"Headphone Jack", "HP_OUT";
|
||||||
|
|
||||||
|
simple-audio-card,cpu {
|
||||||
|
sound-dai = <&sai2>;
|
||||||
|
};
|
||||||
|
|
||||||
|
dailink_master: simple-audio-card,codec {
|
||||||
|
sound-dai = <&sgtl5000>;
|
||||||
|
clocks = <&clks IMX6UL_CLK_SAI2>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&can1 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_flexcan1>;
|
||||||
|
xceiver-supply = <®_3p3v>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&can2 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_flexcan2>;
|
||||||
|
xceiver-supply = <®_3p3v>;
|
||||||
|
status = "okay";
|
||||||
};
|
};
|
||||||
|
|
||||||
&fec1 {
|
&fec1 {
|
||||||
pinctrl-names = "default";
|
pinctrl-names = "default";
|
||||||
pinctrl-0 = <&pinctrl_enet1>;
|
pinctrl-0 = <&pinctrl_enet1>;
|
||||||
phy-mode = "rmii";
|
phy-mode = "rmii";
|
||||||
|
phy-handle = <ðphy0>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&fec2 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_enet2>;
|
||||||
|
phy-mode = "rmii";
|
||||||
|
phy-handle = <ðphy1>;
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
mdio {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
ethphy0: ethernet-phy@0 {
|
||||||
|
compatible = "ethernet-phy-ieee802.3-c22";
|
||||||
|
reg = <0>;
|
||||||
|
};
|
||||||
|
|
||||||
|
ethphy1: ethernet-phy@1 {
|
||||||
|
compatible = "ethernet-phy-ieee802.3-c22";
|
||||||
|
reg = <1>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&gpmi {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_gpmi_nand>;
|
||||||
|
nand-on-flash-bbt;
|
||||||
status = "okay";
|
status = "okay";
|
||||||
};
|
};
|
||||||
|
|
||||||
@ -71,21 +142,105 @@
|
|||||||
pinctrl-names = "default";
|
pinctrl-names = "default";
|
||||||
pinctrl-0 = <&pinctrl_i2c1>;
|
pinctrl-0 = <&pinctrl_i2c1>;
|
||||||
status = "okay";
|
status = "okay";
|
||||||
|
|
||||||
|
sgtl5000: codec@a {
|
||||||
|
compatible = "fsl,sgtl5000";
|
||||||
|
reg = <0x0a>;
|
||||||
|
#sound-dai-cells = <0>;
|
||||||
|
clocks = <&clks IMX6UL_CLK_OSC>;
|
||||||
|
clock-names = "mclk";
|
||||||
|
VDDA-supply = <®_3p3v>;
|
||||||
|
VDDIO-supply = <®_3p3v>;
|
||||||
|
VDDD-supply = <®_1p8v>;
|
||||||
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
&i2c2 {
|
&i2c2 {
|
||||||
clock_frequency = <100000>;
|
clock-frequency = <100000>;
|
||||||
pinctrl-names = "default";
|
pinctrl-names = "default";
|
||||||
pinctrl-0 = <&pinctrl_i2c2>;
|
pinctrl-0 = <&pinctrl_i2c2>;
|
||||||
status = "okay";
|
status = "okay";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
&lcdif {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_lcdif_dat
|
||||||
|
&pinctrl_lcdif_ctrl>;
|
||||||
|
display = <&display0>;
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
display0: display0 {
|
||||||
|
bits-per-pixel = <16>;
|
||||||
|
bus-width = <18>;
|
||||||
|
|
||||||
|
display-timings {
|
||||||
|
native-mode = <&timing0>;
|
||||||
|
timing0: timing0 {
|
||||||
|
clock-frequency = <28000000>;
|
||||||
|
hactive = <800>;
|
||||||
|
vactive = <480>;
|
||||||
|
hfront-porch = <30>;
|
||||||
|
hback-porch = <30>;
|
||||||
|
hsync-len = <64>;
|
||||||
|
vback-porch = <5>;
|
||||||
|
vfront-porch = <5>;
|
||||||
|
vsync-len = <20>;
|
||||||
|
hsync-active = <0>;
|
||||||
|
vsync-active = <0>;
|
||||||
|
de-active = <1>;
|
||||||
|
pixelclk-active = <0>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&pwm8 {
|
||||||
|
#pwm-cells = <2>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_pwm8>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&tsc {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_tsc>;
|
||||||
|
xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
|
||||||
|
};
|
||||||
|
|
||||||
|
&sai2 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_sai2>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&tsc {
|
||||||
|
measure-delay-time = <0x1ffff>;
|
||||||
|
pre-charge-time = <0x1fff>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
&uart1 {
|
&uart1 {
|
||||||
pinctrl-names = "default";
|
pinctrl-names = "default";
|
||||||
pinctrl-0 = <&pinctrl_uart1>;
|
pinctrl-0 = <&pinctrl_uart1>;
|
||||||
status = "okay";
|
status = "okay";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
&uart2 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_uart2>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&usbotg1 {
|
||||||
|
dr_mode = "peripheral";
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&usbotg2 {
|
||||||
|
dr_mode = "host";
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
&usdhc1 {
|
&usdhc1 {
|
||||||
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||||||
pinctrl-0 = <&pinctrl_usdhc1>;
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
||||||
@ -100,8 +255,6 @@
|
|||||||
&iomuxc {
|
&iomuxc {
|
||||||
pinctrl_enet1: enet1grp {
|
pinctrl_enet1: enet1grp {
|
||||||
fsl,pins = <
|
fsl,pins = <
|
||||||
MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
|
|
||||||
MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
|
|
||||||
MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
|
MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x1b0b0
|
||||||
MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
|
MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
|
||||||
MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
|
MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
|
||||||
@ -112,6 +265,55 @@
|
|||||||
>;
|
>;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
pinctrl_enet2: enet2grp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_GPIO1_IO07__ENET2_MDC 0x1b0b0
|
||||||
|
MX6UL_PAD_GPIO1_IO06__ENET2_MDIO 0x1b0b0
|
||||||
|
MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN 0x1b0b0
|
||||||
|
MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x1b0b0 /* ENET_nRST */
|
||||||
|
MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00 0x1b0b0
|
||||||
|
MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01 0x1b0b0
|
||||||
|
MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN 0x1b0b0
|
||||||
|
MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00 0x1b0b0
|
||||||
|
MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01 0x1b0b0
|
||||||
|
MX6UL_PAD_GPIO1_IO05__ENET2_REF_CLK2 0x4001b031
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_flexcan1: flexcan1grp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x1b020
|
||||||
|
MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x1b020
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_flexcan2: flexcan2grp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x1b020
|
||||||
|
MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x1b020
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_gpmi_nand: gpminandgrp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1
|
||||||
|
MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1
|
||||||
|
MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1
|
||||||
|
MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
|
||||||
|
MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1
|
||||||
|
MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1
|
||||||
|
MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1
|
||||||
|
MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1
|
||||||
|
MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1
|
||||||
|
MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1
|
||||||
|
MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1
|
||||||
|
MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1
|
||||||
|
MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1
|
||||||
|
MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1
|
||||||
|
MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
pinctrl_i2c1: i2c1grp {
|
pinctrl_i2c1: i2c1grp {
|
||||||
fsl,pins = <
|
fsl,pins = <
|
||||||
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
|
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
|
||||||
@ -126,6 +328,63 @@
|
|||||||
>;
|
>;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
pinctrl_lcdif_ctrl: lcdifctrlgrp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
|
||||||
|
MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
|
||||||
|
MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
|
||||||
|
MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_lcdif_dat: lcdifdatgrp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_pwm8: pwm8grp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x110b0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_tsc: tscgrp {
|
||||||
|
fsl,pin = <
|
||||||
|
MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
|
||||||
|
MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
|
||||||
|
MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
|
||||||
|
MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_sai2: sai2grp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x130b0
|
||||||
|
MX6UL_PAD_JTAG_TMS__CCM_CLKO1 0x4001b031
|
||||||
|
MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088
|
||||||
|
MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088
|
||||||
|
MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x120b0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
pinctrl_uart1: uart1grp {
|
pinctrl_uart1: uart1grp {
|
||||||
fsl,pins = <
|
fsl,pins = <
|
||||||
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
|
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
|
||||||
@ -133,6 +392,15 @@
|
|||||||
>;
|
>;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
pinctrl_uart2: uart2grp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
|
||||||
|
MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
|
||||||
|
MX6UL_PAD_UART3_RX_DATA__UART2_DCE_RTS 0x1b0b1
|
||||||
|
MX6UL_PAD_UART3_TX_DATA__UART2_DCE_CTS 0x1b0b1
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
pinctrl_usdhc1: usdhc1grp {
|
pinctrl_usdhc1: usdhc1grp {
|
||||||
fsl,pins = <
|
fsl,pins = <
|
||||||
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
|
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
|
||||||
@ -165,4 +433,15 @@
|
|||||||
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
|
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
|
||||||
>;
|
>;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
pinctrl_usdhc2: usdhc2grp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_CSI_VSYNC__USDHC2_CLK 0x17070
|
||||||
|
MX6UL_PAD_CSI_HSYNC__USDHC2_CMD 0x10070
|
||||||
|
MX6UL_PAD_CSI_DATA00__USDHC2_DATA0 0x17070
|
||||||
|
MX6UL_PAD_CSI_DATA01__USDHC2_DATA1 0x17070
|
||||||
|
MX6UL_PAD_CSI_DATA02__USDHC2_DATA2 0x17070
|
||||||
|
MX6UL_PAD_CSI_DATA03__USDHC2_DATA3 0x17070
|
||||||
|
>;
|
||||||
|
};
|
||||||
};
|
};
|
||||||
|
|||||||
148
arch/arm/dts/imx6ul-imx6ull-opos6ul.dtsi
Normal file
148
arch/arm/dts/imx6ul-imx6ull-opos6ul.dtsi
Normal file
@ -0,0 +1,148 @@
|
|||||||
|
// SPDX-License-Identifier: GPL-2.0 OR MIT
|
||||||
|
//
|
||||||
|
// Copyright 2019 Armadeus Systems <support@armadeus.com>
|
||||||
|
|
||||||
|
/ {
|
||||||
|
memory@80000000 {
|
||||||
|
device_type = "memory";
|
||||||
|
reg = <0x80000000 0>; /* will be filled by U-Boot */
|
||||||
|
};
|
||||||
|
|
||||||
|
reg_3v3: regulator-3v3 {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
regulator-name = "3V3";
|
||||||
|
regulator-min-microvolt = <3300000>;
|
||||||
|
regulator-max-microvolt = <3300000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
usdhc3_pwrseq: usdhc3-pwrseq {
|
||||||
|
compatible = "mmc-pwrseq-simple";
|
||||||
|
reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&fec1 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_enet1>;
|
||||||
|
phy-mode = "rmii";
|
||||||
|
phy-reset-duration = <1>;
|
||||||
|
phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
|
||||||
|
phy-handle = <ðphy1>;
|
||||||
|
phy-supply = <®_3v3>;
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
mdio: mdio {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
ethphy1: ethernet-phy@1 {
|
||||||
|
compatible = "ethernet-phy-ieee802.3-c22";
|
||||||
|
reg = <1>;
|
||||||
|
interrupt-parent = <&gpio4>;
|
||||||
|
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
/* Bluetooth */
|
||||||
|
&uart8 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_uart8>;
|
||||||
|
uart-has-rtscts;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
/* eMMC */
|
||||||
|
&usdhc1 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
||||||
|
bus-width = <8>;
|
||||||
|
no-1-8-v;
|
||||||
|
non-removable;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
/* WiFi */
|
||||||
|
&usdhc2 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_usdhc2>;
|
||||||
|
bus-width = <4>;
|
||||||
|
no-1-8-v;
|
||||||
|
non-removable;
|
||||||
|
mmc-pwrseq = <&usdhc3_pwrseq>;
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
brcmf: wifi@1 {
|
||||||
|
compatible = "brcm,bcm4329-fmac";
|
||||||
|
reg = <1>;
|
||||||
|
interrupt-parent = <&gpio2>;
|
||||||
|
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
|
||||||
|
interrupt-names = "host-wake";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&iomuxc {
|
||||||
|
pinctrl_enet1: enet1grp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
|
||||||
|
MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
|
||||||
|
MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x130b0
|
||||||
|
MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x130b0
|
||||||
|
MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x130b0
|
||||||
|
MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x130b0
|
||||||
|
MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
|
||||||
|
MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
|
||||||
|
MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
|
||||||
|
/* INT# */
|
||||||
|
MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0
|
||||||
|
/* RST# */
|
||||||
|
MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x130b0
|
||||||
|
MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_uart8: uart8grp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x1b0b0
|
||||||
|
MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x1b0b0
|
||||||
|
MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x1b0b0
|
||||||
|
MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x1b0b0
|
||||||
|
/* BT_REG_ON */
|
||||||
|
MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x130b0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_usdhc1: usdhc1grp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
|
||||||
|
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
|
||||||
|
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
|
||||||
|
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
|
||||||
|
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
|
||||||
|
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
|
||||||
|
MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059
|
||||||
|
MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059
|
||||||
|
MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059
|
||||||
|
MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_usdhc2: usdhc2grp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x1b0b0
|
||||||
|
MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x100b0
|
||||||
|
MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x1b0b0
|
||||||
|
MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x1b0b0
|
||||||
|
MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x1b0b0
|
||||||
|
MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x1b0b0
|
||||||
|
/* WL_REG_ON */
|
||||||
|
MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x130b0
|
||||||
|
/* WL_IRQ */
|
||||||
|
MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
};
|
||||||
327
arch/arm/dts/imx6ul-imx6ull-opos6uldev.dtsi
Normal file
327
arch/arm/dts/imx6ul-imx6ull-opos6uldev.dtsi
Normal file
@ -0,0 +1,327 @@
|
|||||||
|
// SPDX-License-Identifier: GPL-2.0 OR MIT
|
||||||
|
//
|
||||||
|
// Copyright 2019 Armadeus Systems <support@armadeus.com>
|
||||||
|
|
||||||
|
/ {
|
||||||
|
chosen {
|
||||||
|
stdout-path = &uart1;
|
||||||
|
};
|
||||||
|
|
||||||
|
backlight: backlight {
|
||||||
|
compatible = "pwm-backlight";
|
||||||
|
pwms = <&pwm3 0 191000>;
|
||||||
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
||||||
|
default-brightness-level = <7>;
|
||||||
|
power-supply = <®_5v>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
gpio-keys {
|
||||||
|
compatible = "gpio-keys";
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_gpio_keys>;
|
||||||
|
|
||||||
|
user-button {
|
||||||
|
label = "User button";
|
||||||
|
gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
|
||||||
|
linux,code = <BTN_MISC>;
|
||||||
|
wakeup-source;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
leds {
|
||||||
|
compatible = "gpio-leds";
|
||||||
|
|
||||||
|
user-led {
|
||||||
|
label = "User";
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_led>;
|
||||||
|
gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
|
||||||
|
linux,default-trigger = "heartbeat";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
onewire {
|
||||||
|
compatible = "w1-gpio";
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_w1>;
|
||||||
|
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
|
||||||
|
};
|
||||||
|
|
||||||
|
panel: panel {
|
||||||
|
compatible = "armadeus,st0700-adapt";
|
||||||
|
power-supply = <®_3v3>;
|
||||||
|
backlight = <&backlight>;
|
||||||
|
|
||||||
|
port {
|
||||||
|
panel_in: endpoint {
|
||||||
|
remote-endpoint = <&lcdif_out>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
reg_5v: regulator-5v {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
regulator-name = "5V";
|
||||||
|
regulator-min-microvolt = <5000000>;
|
||||||
|
regulator-max-microvolt = <5000000>;
|
||||||
|
};
|
||||||
|
|
||||||
|
reg_usbotg1_vbus: regulator-usbotg1vbus {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
regulator-name = "usbotg1vbus";
|
||||||
|
regulator-min-microvolt = <5000000>;
|
||||||
|
regulator-max-microvolt = <5000000>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_usbotg1_vbus>;
|
||||||
|
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
|
||||||
|
enable-active-high;
|
||||||
|
};
|
||||||
|
|
||||||
|
reg_usbotg2_vbus: regulator-usbotg2vbus {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
regulator-name = "usbotg2vbus";
|
||||||
|
regulator-min-microvolt = <5000000>;
|
||||||
|
regulator-max-microvolt = <5000000>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_usbotg2_vbus>;
|
||||||
|
gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
|
||||||
|
enable-active-high;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&adc1 {
|
||||||
|
vref-supply = <®_3v3>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&can1 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_flexcan1>;
|
||||||
|
xceiver-supply = <®_5v>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&can2 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_flexcan2>;
|
||||||
|
xceiver-supply = <®_5v>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&ecspi4 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_ecspi4>;
|
||||||
|
cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&i2c1 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_i2c1>;
|
||||||
|
clock-frequency = <400000>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&i2c2 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_i2c2>;
|
||||||
|
clock-frequency = <400000>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&lcdif {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_lcdif>;
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
port {
|
||||||
|
lcdif_out: endpoint {
|
||||||
|
remote-endpoint = <&panel_in>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&pwm3 {
|
||||||
|
#pwm-cells = <2>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_pwm3>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&snvs_pwrkey {
|
||||||
|
status = "disabled";
|
||||||
|
};
|
||||||
|
|
||||||
|
&tsc {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_tsc>;
|
||||||
|
xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
|
||||||
|
measure-delay-time = <0xffff>;
|
||||||
|
pre-charge-time = <0xffff>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&uart1 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_uart1>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&uart2 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_uart2>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&usbotg1 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_usbotg1_id>;
|
||||||
|
vbus-supply = <®_usbotg1_vbus>;
|
||||||
|
dr_mode = "otg";
|
||||||
|
disable-over-current;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&usbotg2 {
|
||||||
|
vbus-supply = <®_usbotg2_vbus>;
|
||||||
|
dr_mode = "host";
|
||||||
|
disable-over-current;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&iomuxc {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_gpios>;
|
||||||
|
|
||||||
|
pinctrl_ecspi4: ecspi4grp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x1b0b0
|
||||||
|
MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x1b0b0
|
||||||
|
MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x1b0b0
|
||||||
|
MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x1b0b0
|
||||||
|
MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x1b0b0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_flexcan1: flexcan1grp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0
|
||||||
|
MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_flexcan2: flexcan2grp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0
|
||||||
|
MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_gpios: gpiosgrp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0b0b0
|
||||||
|
MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x0b0b0
|
||||||
|
MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x0b0b0
|
||||||
|
MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0b0b0
|
||||||
|
MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x0b0b0
|
||||||
|
MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0b0b0
|
||||||
|
MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0b0b0
|
||||||
|
MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x0b0b0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_gpio_keys: gpiokeysgrp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0b0b0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_i2c1: i2c1grp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
|
||||||
|
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_i2c2: i2c2grp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
|
||||||
|
MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_lcdif: lcdifgrp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x100b1
|
||||||
|
MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x100b1
|
||||||
|
MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x100b1
|
||||||
|
MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x100b1
|
||||||
|
MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x100b1
|
||||||
|
MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x100b1
|
||||||
|
MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x100b1
|
||||||
|
MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x100b1
|
||||||
|
MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x100b1
|
||||||
|
MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x100b1
|
||||||
|
MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x100b1
|
||||||
|
MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x100b1
|
||||||
|
MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x100b1
|
||||||
|
MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x100b1
|
||||||
|
MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x100b1
|
||||||
|
MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x100b1
|
||||||
|
MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x100b1
|
||||||
|
MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x100b1
|
||||||
|
MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x100b1
|
||||||
|
MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x100b1
|
||||||
|
MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x100b1
|
||||||
|
MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x100b1
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_led: ledgrp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_pwm3: pwm3grp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_NAND_ALE__PWM3_OUT 0x1b0b0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_tsc: tscgrp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
|
||||||
|
MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
|
||||||
|
MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
|
||||||
|
MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_uart1: uart1grp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
|
||||||
|
MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_uart2: uart2grp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
|
||||||
|
MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_usbotg1_id: usbotg1idgrp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x1b0b0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_usbotg1_vbus: usbotg1vbusgrp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1b0b0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
};
|
||||||
@ -1,56 +1,18 @@
|
|||||||
|
// SPDX-License-Identifier: GPL-2.0 OR X11
|
||||||
/*
|
/*
|
||||||
* Copyright (C) 2016 Amarula Solutions B.V.
|
* Copyright (C) 2016 Amarula Solutions B.V.
|
||||||
* Copyright (C) 2016 Engicam S.r.l.
|
* Copyright (C) 2016 Engicam S.r.l.
|
||||||
*
|
|
||||||
* This file is dual-licensed: you can use it either under the terms
|
|
||||||
* of the GPL or the X11 license, at your option. Note that this dual
|
|
||||||
* licensing only applies to this file, and not this project as a
|
|
||||||
* whole.
|
|
||||||
*
|
|
||||||
* a) This file is free software; you can redistribute it and/or
|
|
||||||
* modify it under the terms of the GNU General Public License
|
|
||||||
* version 2 as published by the Free Software Foundation.
|
|
||||||
*
|
|
||||||
* This file is distributed in the hope that it will be useful
|
|
||||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
* GNU General Public License for more details.
|
|
||||||
*
|
|
||||||
* Or, alternatively
|
|
||||||
*
|
|
||||||
* b) Permission is hereby granted, free of charge, to any person
|
|
||||||
* obtaining a copy of this software and associated documentation
|
|
||||||
* files (the "Software"), to deal in the Software without
|
|
||||||
* restriction, including without limitation the rights to use
|
|
||||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
||||||
* sell copies of the Software, and to permit persons to whom the
|
|
||||||
* Software is furnished to do so, subject to the following
|
|
||||||
* conditions:
|
|
||||||
*
|
|
||||||
* The above copyright notice and this permission notice shall be
|
|
||||||
* included in all copies or substantial portions of the Software.
|
|
||||||
*
|
|
||||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
|
|
||||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
||||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
||||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
||||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
|
|
||||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
||||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
||||||
* OTHER DEALINGS IN THE SOFTWARE.
|
|
||||||
*/
|
*/
|
||||||
|
|
||||||
/dts-v1/;
|
/dts-v1/;
|
||||||
|
|
||||||
#include "imx6ul.dtsi"
|
|
||||||
#include "imx6ul-isiot.dtsi"
|
#include "imx6ul-isiot.dtsi"
|
||||||
|
|
||||||
/ {
|
/ {
|
||||||
model = "Engicam Is.IoT MX6UL eMMC Starterkit";
|
model = "Engicam Is.IoT MX6UL eMMC Starter kit";
|
||||||
compatible = "engicam,imx6ul-isiot", "fsl,imx6ul";
|
compatible = "engicam,imx6ul-isiot", "fsl,imx6ul";
|
||||||
};
|
};
|
||||||
|
|
||||||
&usdhc2 {
|
&usdhc2 {
|
||||||
u-boot,dm-spl;
|
|
||||||
status = "okay";
|
status = "okay";
|
||||||
};
|
};
|
||||||
|
|||||||
@ -1,51 +1,18 @@
|
|||||||
|
// SPDX-License-Identifier: GPL-2.0 OR X11
|
||||||
/*
|
/*
|
||||||
* Copyright (C) 2016 Amarula Solutions B.V.
|
* Copyright (C) 2016 Amarula Solutions B.V.
|
||||||
* Copyright (C) 2016 Engicam S.r.l.
|
* Copyright (C) 2016 Engicam S.r.l.
|
||||||
*
|
|
||||||
* This file is dual-licensed: you can use it either under the terms
|
|
||||||
* of the GPL or the X11 license, at your option. Note that this dual
|
|
||||||
* licensing only applies to this file, and not this project as a
|
|
||||||
* whole.
|
|
||||||
*
|
|
||||||
* a) This file is free software; you can redistribute it and/or
|
|
||||||
* modify it under the terms of the GNU General Public License
|
|
||||||
* version 2 as published by the Free Software Foundation.
|
|
||||||
*
|
|
||||||
* This file is distributed in the hope that it will be useful
|
|
||||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
* GNU General Public License for more details.
|
|
||||||
*
|
|
||||||
* Or, alternatively
|
|
||||||
*
|
|
||||||
* b) Permission is hereby granted, free of charge, to any person
|
|
||||||
* obtaining a copy of this software and associated documentation
|
|
||||||
* files (the "Software"), to deal in the Software without
|
|
||||||
* restriction, including without limitation the rights to use
|
|
||||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
||||||
* sell copies of the Software, and to permit persons to whom the
|
|
||||||
* Software is furnished to do so, subject to the following
|
|
||||||
* conditions:
|
|
||||||
*
|
|
||||||
* The above copyright notice and this permission notice shall be
|
|
||||||
* included in all copies or substantial portions of the Software.
|
|
||||||
*
|
|
||||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
|
|
||||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
||||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
||||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
||||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
|
|
||||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
||||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
||||||
* OTHER DEALINGS IN THE SOFTWARE.
|
|
||||||
*/
|
*/
|
||||||
|
|
||||||
/dts-v1/;
|
/dts-v1/;
|
||||||
|
|
||||||
#include "imx6ul.dtsi"
|
|
||||||
#include "imx6ul-isiot.dtsi"
|
#include "imx6ul-isiot.dtsi"
|
||||||
|
|
||||||
/ {
|
/ {
|
||||||
model = "Engicam Is.IoT MX6UL NAND Starterkit";
|
model = "Engicam Is.IoT MX6UL NAND Starter kit";
|
||||||
compatible = "engicam,imx6ul-isiot", "fsl,imx6ul";
|
compatible = "engicam,imx6ul-isiot", "fsl,imx6ul";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
&gpmi {
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|||||||
@ -1,63 +1,108 @@
|
|||||||
|
// SPDX-License-Identifier: GPL-2.0 OR X11
|
||||||
/*
|
/*
|
||||||
* Copyright (C) 2016 Amarula Solutions B.V.
|
* Copyright (C) 2016 Amarula Solutions B.V.
|
||||||
* Copyright (C) 2016 Engicam S.r.l.
|
* Copyright (C) 2016 Engicam S.r.l.
|
||||||
*
|
|
||||||
* This file is dual-licensed: you can use it either under the terms
|
|
||||||
* of the GPL or the X11 license, at your option. Note that this dual
|
|
||||||
* licensing only applies to this file, and not this project as a
|
|
||||||
* whole.
|
|
||||||
*
|
|
||||||
* a) This file is free software; you can redistribute it and/or
|
|
||||||
* modify it under the terms of the GNU General Public License
|
|
||||||
* version 2 as published by the Free Software Foundation.
|
|
||||||
*
|
|
||||||
* This file is distributed in the hope that it will be useful
|
|
||||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
* GNU General Public License for more details.
|
|
||||||
*
|
|
||||||
* Or, alternatively
|
|
||||||
*
|
|
||||||
* b) Permission is hereby granted, free of charge, to any person
|
|
||||||
* obtaining a copy of this software and associated documentation
|
|
||||||
* files (the "Software"), to deal in the Software without
|
|
||||||
* restriction, including without limitation the rights to use
|
|
||||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
||||||
* sell copies of the Software, and to permit persons to whom the
|
|
||||||
* Software is furnished to do so, subject to the following
|
|
||||||
* conditions:
|
|
||||||
*
|
|
||||||
* The above copyright notice and this permission notice shall be
|
|
||||||
* included in all copies or substantial portions of the Software.
|
|
||||||
*
|
|
||||||
* THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
|
|
||||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
||||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
||||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
||||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
|
|
||||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
||||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
||||||
* OTHER DEALINGS IN THE SOFTWARE.
|
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#include <dt-bindings/gpio/gpio.h>
|
#include <dt-bindings/gpio/gpio.h>
|
||||||
#include <dt-bindings/input/input.h>
|
#include <dt-bindings/input/input.h>
|
||||||
|
#include "imx6ul.dtsi"
|
||||||
|
|
||||||
/ {
|
/ {
|
||||||
memory {
|
memory@80000000 {
|
||||||
|
device_type = "memory";
|
||||||
reg = <0x80000000 0x20000000>;
|
reg = <0x80000000 0x20000000>;
|
||||||
};
|
};
|
||||||
|
|
||||||
chosen {
|
chosen {
|
||||||
stdout-path = &uart1;
|
stdout-path = &uart1;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
backlight {
|
||||||
|
compatible = "pwm-backlight";
|
||||||
|
pwms = <&pwm8 0 100000>;
|
||||||
|
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
|
||||||
|
10 11 12 13 14 15 16 17 18 19
|
||||||
|
20 21 22 23 24 25 26 27 28 29
|
||||||
|
30 31 32 33 34 35 36 37 38 39
|
||||||
|
40 41 42 43 44 45 46 47 48 49
|
||||||
|
50 51 52 53 54 55 56 57 58 59
|
||||||
|
60 61 62 63 64 65 66 67 68 69
|
||||||
|
70 71 72 73 74 75 76 77 78 79
|
||||||
|
80 81 82 83 84 85 86 87 88 89
|
||||||
|
90 91 92 93 94 95 96 97 98 99
|
||||||
|
100>;
|
||||||
|
default-brightness-level = <100>;
|
||||||
|
};
|
||||||
|
|
||||||
|
reg_1p8v: regulator-1p8v {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
regulator-name = "1P8V";
|
||||||
|
regulator-min-microvolt = <1800000>;
|
||||||
|
regulator-max-microvolt = <1800000>;
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-boot-on;
|
||||||
|
};
|
||||||
|
|
||||||
|
reg_3p3v: regulator-3p3v {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
regulator-name = "3P3V";
|
||||||
|
regulator-min-microvolt = <3300000>;
|
||||||
|
regulator-max-microvolt = <3300000>;
|
||||||
|
regulator-always-on;
|
||||||
|
regulator-boot-on;
|
||||||
|
};
|
||||||
|
|
||||||
|
sound {
|
||||||
|
compatible = "simple-audio-card";
|
||||||
|
simple-audio-card,name = "imx6ul-isiot-sgtl5000";
|
||||||
|
simple-audio-card,format = "i2s";
|
||||||
|
simple-audio-card,bitclock-master = <&dailink_master>;
|
||||||
|
simple-audio-card,frame-master = <&dailink_master>;
|
||||||
|
simple-audio-card,widgets =
|
||||||
|
"Microphone", "Mic Jack",
|
||||||
|
"Line", "Line In",
|
||||||
|
"Line", "Line Out",
|
||||||
|
"Headphone", "Headphone Jack";
|
||||||
|
simple-audio-card,routing =
|
||||||
|
"MIC_IN", "Mic Jack",
|
||||||
|
"Mic Jack", "Mic Bias",
|
||||||
|
"Headphone Jack", "HP_OUT";
|
||||||
|
|
||||||
|
simple-audio-card,cpu {
|
||||||
|
sound-dai = <&sai2>;
|
||||||
|
};
|
||||||
|
|
||||||
|
dailink_master: simple-audio-card,codec {
|
||||||
|
sound-dai = <&sgtl5000>;
|
||||||
|
clocks = <&clks IMX6UL_CLK_SAI2>;
|
||||||
|
};
|
||||||
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
&fec1 {
|
&fec1 {
|
||||||
pinctrl-names = "default";
|
pinctrl-names = "default";
|
||||||
pinctrl-0 = <&pinctrl_enet1>;
|
pinctrl-0 = <&pinctrl_enet1>;
|
||||||
phy-mode = "rmii";
|
phy-mode = "rmii";
|
||||||
|
phy-handle = <ðphy0>;
|
||||||
status = "okay";
|
status = "okay";
|
||||||
|
|
||||||
|
mdio {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
ethphy0: ethernet-phy@0 {
|
||||||
|
compatible = "ethernet-phy-ieee802.3-c22";
|
||||||
|
reg = <0>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&gpmi {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_gpmi_nand>;
|
||||||
|
nand-on-flash-bbt;
|
||||||
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
&i2c1 {
|
&i2c1 {
|
||||||
@ -65,15 +110,95 @@
|
|||||||
pinctrl-names = "default";
|
pinctrl-names = "default";
|
||||||
pinctrl-0 = <&pinctrl_i2c1>;
|
pinctrl-0 = <&pinctrl_i2c1>;
|
||||||
status = "okay";
|
status = "okay";
|
||||||
|
|
||||||
|
sgtl5000: codec@a {
|
||||||
|
compatible = "fsl,sgtl5000";
|
||||||
|
reg = <0x0a>;
|
||||||
|
#sound-dai-cells = <0>;
|
||||||
|
clocks = <&clks IMX6UL_CLK_OSC>;
|
||||||
|
clock-names = "mclk";
|
||||||
|
VDDA-supply = <®_3p3v>;
|
||||||
|
VDDIO-supply = <®_3p3v>;
|
||||||
|
VDDD-supply = <®_1p8v>;
|
||||||
|
};
|
||||||
|
|
||||||
|
stmpe811: gpio-expander@44 {
|
||||||
|
compatible = "st,stmpe811";
|
||||||
|
reg = <0x44>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_stmpe>;
|
||||||
|
interrupt-parent = <&gpio1>;
|
||||||
|
interrupts = <18 IRQ_TYPE_EDGE_FALLING>;
|
||||||
|
interrupt-controller;
|
||||||
|
#interrupt-cells = <2>;
|
||||||
|
|
||||||
|
stmpe: touchscreen {
|
||||||
|
compatible = "st,stmpe-ts";
|
||||||
|
st,sample-time = <4>;
|
||||||
|
st,mod-12b = <1>;
|
||||||
|
st,ref-sel = <0>;
|
||||||
|
st,adc-freq = <1>;
|
||||||
|
st,ave-ctrl = <1>;
|
||||||
|
st,touch-det-delay = <2>;
|
||||||
|
st,settling = <2>;
|
||||||
|
st,fraction-z = <7>;
|
||||||
|
st,i-drive = <1>;
|
||||||
|
};
|
||||||
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
&i2c2 {
|
&i2c2 {
|
||||||
clock_frequency = <100000>;
|
clock-frequency = <100000>;
|
||||||
pinctrl-names = "default";
|
pinctrl-names = "default";
|
||||||
pinctrl-0 = <&pinctrl_i2c2>;
|
pinctrl-0 = <&pinctrl_i2c2>;
|
||||||
status = "okay";
|
status = "okay";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
&lcdif {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_lcdif_dat
|
||||||
|
&pinctrl_lcdif_ctrl>;
|
||||||
|
display = <&display0>;
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
display0: display0 {
|
||||||
|
bits-per-pixel = <16>;
|
||||||
|
bus-width = <18>;
|
||||||
|
|
||||||
|
display-timings {
|
||||||
|
native-mode = <&timing0>;
|
||||||
|
timing0: timing0 {
|
||||||
|
clock-frequency = <28000000>;
|
||||||
|
hactive = <800>;
|
||||||
|
vactive = <480>;
|
||||||
|
hfront-porch = <30>;
|
||||||
|
hback-porch = <30>;
|
||||||
|
hsync-len = <64>;
|
||||||
|
vback-porch = <5>;
|
||||||
|
vfront-porch = <5>;
|
||||||
|
vsync-len = <20>;
|
||||||
|
hsync-active = <0>;
|
||||||
|
vsync-active = <0>;
|
||||||
|
de-active = <1>;
|
||||||
|
pixelclk-active = <0>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&pwm8 {
|
||||||
|
#pwm-cells = <2>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_pwm8>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
&sai2 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_sai2>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
&uart1 {
|
&uart1 {
|
||||||
pinctrl-names = "default";
|
pinctrl-names = "default";
|
||||||
pinctrl-0 = <&pinctrl_uart1>;
|
pinctrl-0 = <&pinctrl_uart1>;
|
||||||
@ -81,8 +206,10 @@
|
|||||||
};
|
};
|
||||||
|
|
||||||
&usdhc1 {
|
&usdhc1 {
|
||||||
pinctrl-names = "default";
|
pinctrl-names = "default", "state_100mhz", "state_200mhz";
|
||||||
pinctrl-0 = <&pinctrl_usdhc1>;
|
pinctrl-0 = <&pinctrl_usdhc1>;
|
||||||
|
pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
|
||||||
|
pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
|
||||||
cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
|
cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
|
||||||
bus-width = <4>;
|
bus-width = <4>;
|
||||||
no-1-8-v;
|
no-1-8-v;
|
||||||
@ -114,6 +241,26 @@
|
|||||||
>;
|
>;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
pinctrl_gpmi_nand: gpminandgrp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_NAND_CLE__RAWNAND_CLE 0xb0b1
|
||||||
|
MX6UL_PAD_NAND_ALE__RAWNAND_ALE 0xb0b1
|
||||||
|
MX6UL_PAD_NAND_WP_B__RAWNAND_WP_B 0xb0b1
|
||||||
|
MX6UL_PAD_NAND_READY_B__RAWNAND_READY_B 0xb000
|
||||||
|
MX6UL_PAD_NAND_CE0_B__RAWNAND_CE0_B 0xb0b1
|
||||||
|
MX6UL_PAD_NAND_RE_B__RAWNAND_RE_B 0xb0b1
|
||||||
|
MX6UL_PAD_NAND_WE_B__RAWNAND_WE_B 0xb0b1
|
||||||
|
MX6UL_PAD_NAND_DATA00__RAWNAND_DATA00 0xb0b1
|
||||||
|
MX6UL_PAD_NAND_DATA01__RAWNAND_DATA01 0xb0b1
|
||||||
|
MX6UL_PAD_NAND_DATA02__RAWNAND_DATA02 0xb0b1
|
||||||
|
MX6UL_PAD_NAND_DATA03__RAWNAND_DATA03 0xb0b1
|
||||||
|
MX6UL_PAD_NAND_DATA04__RAWNAND_DATA04 0xb0b1
|
||||||
|
MX6UL_PAD_NAND_DATA05__RAWNAND_DATA05 0xb0b1
|
||||||
|
MX6UL_PAD_NAND_DATA06__RAWNAND_DATA06 0xb0b1
|
||||||
|
MX6UL_PAD_NAND_DATA07__RAWNAND_DATA07 0xb0b1
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
pinctrl_i2c1: i2c1grp {
|
pinctrl_i2c1: i2c1grp {
|
||||||
fsl,pins = <
|
fsl,pins = <
|
||||||
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
|
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
|
||||||
@ -123,8 +270,62 @@
|
|||||||
|
|
||||||
pinctrl_i2c2: i2c2grp {
|
pinctrl_i2c2: i2c2grp {
|
||||||
fsl,pins = <
|
fsl,pins = <
|
||||||
MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
|
MX6UL_PAD_GPIO1_IO00__I2C2_SCL 0x4001b8b0
|
||||||
MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
|
MX6UL_PAD_GPIO1_IO01__I2C2_SDA 0x4001b8b0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_lcdif_ctrl: lcdifctrlgrp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x79
|
||||||
|
MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x79
|
||||||
|
MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x79
|
||||||
|
MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x79
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_lcdif_dat: lcdifdatgrp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x79
|
||||||
|
MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x79
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_pwm8: pwm8grp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_ENET1_RX_ER__PWM8_OUT 0x110b0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_sai2: sai2grp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_JTAG_TCK__SAI2_RX_DATA 0x130b0
|
||||||
|
MX6UL_PAD_JTAG_TMS__CCM_CLKO1 0x4001b031
|
||||||
|
MX6UL_PAD_JTAG_TDI__SAI2_TX_BCLK 0x17088
|
||||||
|
MX6UL_PAD_JTAG_TDO__SAI2_TX_SYNC 0x17088
|
||||||
|
MX6UL_PAD_JTAG_TRST_B__SAI2_TX_DATA 0x120b0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_stmpe: stmpegrp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b0
|
||||||
>;
|
>;
|
||||||
};
|
};
|
||||||
|
|
||||||
@ -146,8 +347,29 @@
|
|||||||
>;
|
>;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170b9
|
||||||
|
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100b9
|
||||||
|
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
|
||||||
|
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
|
||||||
|
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
|
||||||
|
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x170f9
|
||||||
|
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x100f9
|
||||||
|
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
|
||||||
|
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
|
||||||
|
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
|
||||||
|
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
pinctrl_usdhc2: usdhc2grp {
|
pinctrl_usdhc2: usdhc2grp {
|
||||||
u-boot,dm-spl;
|
|
||||||
fsl,pins = <
|
fsl,pins = <
|
||||||
MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070
|
MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x17070
|
||||||
MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070
|
MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x10070
|
||||||
|
|||||||
@ -84,7 +84,7 @@
|
|||||||
};
|
};
|
||||||
|
|
||||||
&ecspi1 {
|
&ecspi1 {
|
||||||
cs-gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
|
cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
|
||||||
pinctrl-names = "default";
|
pinctrl-names = "default";
|
||||||
pinctrl-0 = <&pinctrl_ecspi1>;
|
pinctrl-0 = <&pinctrl_ecspi1>;
|
||||||
status = "okay";
|
status = "okay";
|
||||||
@ -153,6 +153,7 @@
|
|||||||
};
|
};
|
||||||
|
|
||||||
&pwm8 {
|
&pwm8 {
|
||||||
|
#pwm-cells = <2>;
|
||||||
pinctrl-names = "default";
|
pinctrl-names = "default";
|
||||||
pinctrl-0 = <&pinctrl_pwm8>;
|
pinctrl-0 = <&pinctrl_pwm8>;
|
||||||
status = "okay";
|
status = "okay";
|
||||||
@ -177,7 +178,7 @@
|
|||||||
&uart3 {
|
&uart3 {
|
||||||
pinctrl-names = "default";
|
pinctrl-names = "default";
|
||||||
pinctrl-0 = <&pinctrl_uart3>;
|
pinctrl-0 = <&pinctrl_uart3>;
|
||||||
fsl,uart-has-rtscts;
|
uart-has-rtscts;
|
||||||
status = "okay";
|
status = "okay";
|
||||||
};
|
};
|
||||||
|
|
||||||
@ -214,7 +215,6 @@
|
|||||||
wakeup-source;
|
wakeup-source;
|
||||||
vmmc-supply = <®_3v3>;
|
vmmc-supply = <®_3v3>;
|
||||||
voltage-ranges = <3300 3300>;
|
voltage-ranges = <3300 3300>;
|
||||||
bus-width = <4>;
|
|
||||||
no-1-8-v;
|
no-1-8-v;
|
||||||
status = "okay";
|
status = "okay";
|
||||||
};
|
};
|
||||||
@ -229,18 +229,10 @@
|
|||||||
wakeup-source;
|
wakeup-source;
|
||||||
vmmc-supply = <®_3v3>;
|
vmmc-supply = <®_3v3>;
|
||||||
voltage-ranges = <3300 3300>;
|
voltage-ranges = <3300 3300>;
|
||||||
bus-width = <4>;
|
|
||||||
no-1-8-v;
|
no-1-8-v;
|
||||||
status = "okay";
|
status = "okay";
|
||||||
};
|
};
|
||||||
|
|
||||||
&wdog1 {
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&pinctrl_wdog>;
|
|
||||||
fsl,ext-reset-output;
|
|
||||||
status = "okay";
|
|
||||||
};
|
|
||||||
|
|
||||||
&iomuxc {
|
&iomuxc {
|
||||||
pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>;
|
pinctrl-0 = <&pinctrl_reset_out &pinctrl_gpio>;
|
||||||
|
|
||||||
@ -411,10 +403,4 @@
|
|||||||
MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9
|
MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9
|
||||||
>;
|
>;
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_wdog: wdoggrp {
|
|
||||||
fsl,pins = <
|
|
||||||
MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x30b0
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
};
|
};
|
||||||
|
|||||||
@ -11,20 +11,15 @@
|
|||||||
chosen {
|
chosen {
|
||||||
stdout-path = &uart4;
|
stdout-path = &uart4;
|
||||||
};
|
};
|
||||||
|
|
||||||
memory@80000000 {
|
|
||||||
reg = <0x80000000 0x10000000>;
|
|
||||||
device_type = "memory";
|
|
||||||
};
|
|
||||||
};
|
};
|
||||||
|
|
||||||
&ecspi2 {
|
&ecspi2 {
|
||||||
cs-gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>;
|
cs-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
|
||||||
pinctrl-names = "default";
|
pinctrl-names = "default";
|
||||||
pinctrl-0 = <&pinctrl_ecspi2>;
|
pinctrl-0 = <&pinctrl_ecspi2>;
|
||||||
status = "okay";
|
status = "okay";
|
||||||
|
|
||||||
spi-flash@0 {
|
flash@0 {
|
||||||
compatible = "mxicy,mx25v8035f", "jedec,spi-nor";
|
compatible = "mxicy,mx25v8035f", "jedec,spi-nor";
|
||||||
spi-max-frequency = <50000000>;
|
spi-max-frequency = <50000000>;
|
||||||
reg = <0>;
|
reg = <0>;
|
||||||
@ -60,16 +55,13 @@
|
|||||||
pinctrl-names = "default";
|
pinctrl-names = "default";
|
||||||
pinctrl-0 = <&pinctrl_qspi>;
|
pinctrl-0 = <&pinctrl_qspi>;
|
||||||
status = "okay";
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
spi-flash@0 {
|
&wdog1 {
|
||||||
#address-cells = <1>;
|
pinctrl-names = "default";
|
||||||
#size-cells = <1>;
|
pinctrl-0 = <&pinctrl_wdog>;
|
||||||
compatible = "spi-nand";
|
fsl,ext-reset-output;
|
||||||
spi-max-frequency = <104000000>;
|
status = "okay";
|
||||||
spi-tx-bus-width = <4>;
|
|
||||||
spi-rx-bus-width = <4>;
|
|
||||||
reg = <0>;
|
|
||||||
};
|
|
||||||
};
|
};
|
||||||
|
|
||||||
&iomuxc {
|
&iomuxc {
|
||||||
@ -121,4 +113,10 @@
|
|||||||
MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0
|
MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0
|
||||||
>;
|
>;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
pinctrl_wdog: wdoggrp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_GPIO1_IO09__WDOG1_WDOG_ANY 0x18b0
|
||||||
|
>;
|
||||||
|
};
|
||||||
};
|
};
|
||||||
|
|||||||
@ -48,6 +48,7 @@
|
|||||||
compatible = "grinn,imx6ul-litesom", "fsl,imx6ul";
|
compatible = "grinn,imx6ul-litesom", "fsl,imx6ul";
|
||||||
|
|
||||||
memory@80000000 {
|
memory@80000000 {
|
||||||
|
device_type = "memory";
|
||||||
reg = <0x80000000 0x20000000>;
|
reg = <0x80000000 0x20000000>;
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|||||||
@ -1,192 +1,6 @@
|
|||||||
/*
|
// SPDX-License-Identifier: GPL-2.0 OR MIT
|
||||||
* Copyright 2018 Armadeus Systems <support@armadeus.com>
|
//
|
||||||
*
|
// Copyright 2017 Armadeus Systems <support@armadeus.com>
|
||||||
* This file is dual-licensed: you can use it either under the terms
|
|
||||||
* of the GPL or the X11 license, at your option. Note that this dual
|
|
||||||
* licensing only applies to this file, and not this project as a
|
|
||||||
* whole.
|
|
||||||
*
|
|
||||||
* a) This file is free software; you can redistribute it and/or
|
|
||||||
* modify it under the terms of the GNU General Public License as
|
|
||||||
* published by the Free Software Foundation; either version 2 of
|
|
||||||
* the License, or (at your option) any later version.
|
|
||||||
*
|
|
||||||
* This file is distributed in the hope that it will be useful,
|
|
||||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
* GNU General Public License for more details.
|
|
||||||
*
|
|
||||||
* You should have received a copy of the GNU General Public
|
|
||||||
* License along with this file; if not, write to the Free
|
|
||||||
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
|
|
||||||
* MA 02110-1301 USA
|
|
||||||
*
|
|
||||||
* Or, alternatively,
|
|
||||||
*
|
|
||||||
* b) Permission is hereby granted, free of charge, to any person
|
|
||||||
* obtaining a copy of this software and associated documentation
|
|
||||||
* files (the "Software"), to deal in the Software without
|
|
||||||
* restriction, including without limitation the rights to use,
|
|
||||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
||||||
* sell copies of the Software, and to permit persons to whom the
|
|
||||||
* Software is furnished to do so, subject to the following
|
|
||||||
* conditions:
|
|
||||||
*
|
|
||||||
* The above copyright notice and this permission notice shall be
|
|
||||||
* included in all copies or substantial portions of the Software.
|
|
||||||
*
|
|
||||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
||||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
||||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
||||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
||||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
||||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
||||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
||||||
* OTHER DEALINGS IN THE SOFTWARE.
|
|
||||||
*/
|
|
||||||
|
|
||||||
#include "imx6ul.dtsi"
|
#include "imx6ul.dtsi"
|
||||||
|
#include "imx6ul-imx6ull-opos6ul.dtsi"
|
||||||
/ {
|
|
||||||
memory {
|
|
||||||
reg = <0x80000000 0>; /* will be filled by U-Boot */
|
|
||||||
};
|
|
||||||
|
|
||||||
reg_3v3: regulator-3v3 {
|
|
||||||
compatible = "regulator-fixed";
|
|
||||||
regulator-name = "3V3";
|
|
||||||
regulator-min-microvolt = <3300000>;
|
|
||||||
regulator-max-microvolt = <3300000>;
|
|
||||||
};
|
|
||||||
|
|
||||||
usdhc3_pwrseq: usdhc3-pwrseq {
|
|
||||||
compatible = "mmc-pwrseq-simple";
|
|
||||||
reset-gpios = <&gpio2 9 GPIO_ACTIVE_LOW>;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
&fec1 {
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&pinctrl_enet1>;
|
|
||||||
phy-mode = "rmii";
|
|
||||||
phy-reset-duration = <1>;
|
|
||||||
phy-reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
|
|
||||||
phy-handle = <ðphy1>;
|
|
||||||
phy-supply = <®_3v3>;
|
|
||||||
status = "okay";
|
|
||||||
|
|
||||||
mdio: mdio {
|
|
||||||
#address-cells = <1>;
|
|
||||||
#size-cells = <0>;
|
|
||||||
|
|
||||||
ethphy1: ethernet-phy@1 {
|
|
||||||
compatible = "ethernet-phy-ieee802.3-c22";
|
|
||||||
reg = <1>;
|
|
||||||
interrupt-parent = <&gpio4>;
|
|
||||||
interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
|
|
||||||
status = "okay";
|
|
||||||
};
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
/* Bluetooth */
|
|
||||||
&uart8 {
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&pinctrl_uart8>;
|
|
||||||
uart-has-rtscts;
|
|
||||||
status = "okay";
|
|
||||||
};
|
|
||||||
|
|
||||||
/* eMMC */
|
|
||||||
&usdhc1 {
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&pinctrl_usdhc1>;
|
|
||||||
bus-width = <8>;
|
|
||||||
no-1-8-v;
|
|
||||||
non-removable;
|
|
||||||
status = "okay";
|
|
||||||
};
|
|
||||||
|
|
||||||
/* WiFi */
|
|
||||||
&usdhc2 {
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&pinctrl_usdhc2>;
|
|
||||||
bus-width = <4>;
|
|
||||||
no-1-8-v;
|
|
||||||
non-removable;
|
|
||||||
mmc-pwrseq = <&usdhc3_pwrseq>;
|
|
||||||
status = "okay";
|
|
||||||
|
|
||||||
#address-cells = <1>;
|
|
||||||
#size-cells = <0>;
|
|
||||||
|
|
||||||
brcmf: bcrmf@1 {
|
|
||||||
compatible = "brcm,bcm4329-fmac";
|
|
||||||
reg = <1>;
|
|
||||||
interrupt-parent = <&gpio2>;
|
|
||||||
interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
|
|
||||||
interrupt-names = "host-wake";
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
&iomuxc {
|
|
||||||
pinctrl_enet1: enet1grp {
|
|
||||||
fsl,pins = <
|
|
||||||
MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x1b0b0
|
|
||||||
MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
|
|
||||||
MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x130b0
|
|
||||||
MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x130b0
|
|
||||||
MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x130b0
|
|
||||||
MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x130b0
|
|
||||||
MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
|
|
||||||
MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
|
|
||||||
MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
|
|
||||||
/* INT# */
|
|
||||||
MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0
|
|
||||||
/* RST# */
|
|
||||||
MX6UL_PAD_NAND_DATA00__GPIO4_IO02 0x130b0
|
|
||||||
MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
|
|
||||||
pinctrl_uart8: uart8grp {
|
|
||||||
fsl,pins = <
|
|
||||||
MX6UL_PAD_ENET2_TX_EN__UART8_DCE_RX 0x1b0b0
|
|
||||||
MX6UL_PAD_ENET2_TX_DATA1__UART8_DCE_TX 0x1b0b0
|
|
||||||
MX6UL_PAD_ENET2_RX_ER__UART8_DCE_RTS 0x1b0b0
|
|
||||||
MX6UL_PAD_ENET2_TX_CLK__UART8_DCE_CTS 0x1b0b0
|
|
||||||
/* BT_REG_ON */
|
|
||||||
MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x130b0
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
|
|
||||||
pinctrl_usdhc1: usdhc1grp {
|
|
||||||
fsl,pins = <
|
|
||||||
MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x17059
|
|
||||||
MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x10059
|
|
||||||
MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
|
|
||||||
MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
|
|
||||||
MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
|
|
||||||
MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
|
|
||||||
MX6UL_PAD_NAND_READY_B__USDHC1_DATA4 0x17059
|
|
||||||
MX6UL_PAD_NAND_CE0_B__USDHC1_DATA5 0x17059
|
|
||||||
MX6UL_PAD_NAND_CE1_B__USDHC1_DATA6 0x17059
|
|
||||||
MX6UL_PAD_NAND_CLE__USDHC1_DATA7 0x17059
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
|
|
||||||
pinctrl_usdhc2: usdhc2grp {
|
|
||||||
fsl,pins = <
|
|
||||||
MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x1b0b0
|
|
||||||
MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x100b0
|
|
||||||
MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x1b0b0
|
|
||||||
MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x1b0b0
|
|
||||||
MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x1b0b0
|
|
||||||
MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x1b0b0
|
|
||||||
/* WL_REG_ON */
|
|
||||||
MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x130b0
|
|
||||||
/* WL_IRQ */
|
|
||||||
MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|||||||
@ -1,298 +1,21 @@
|
|||||||
/*
|
// SPDX-License-Identifier: GPL-2.0 OR MIT
|
||||||
* Copyright 2017 Armadeus Systems <support@armadeus.com>
|
//
|
||||||
*
|
// Copyright 2017 Armadeus Systems <support@armadeus.com>
|
||||||
* This file is dual-licensed: you can use it either under the terms
|
|
||||||
* of the GPL or the X11 license, at your option. Note that this dual
|
|
||||||
* licensing only applies to this file, and not this project as a
|
|
||||||
* whole.
|
|
||||||
*
|
|
||||||
* a) This file is free software; you can redistribute it and/or
|
|
||||||
* modify it under the terms of the GNU General Public License as
|
|
||||||
* published by the Free Software Foundation; either version 2 of
|
|
||||||
* the License, or (at your option) any later version.
|
|
||||||
*
|
|
||||||
* This file is distributed in the hope that it will be useful,
|
|
||||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
* GNU General Public License for more details.
|
|
||||||
*
|
|
||||||
* You should have received a copy of the GNU General Public
|
|
||||||
* License along with this file; if not, write to the Free
|
|
||||||
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
|
|
||||||
* MA 02110-1301 USA
|
|
||||||
*
|
|
||||||
* Or, alternatively,
|
|
||||||
*
|
|
||||||
* b) Permission is hereby granted, free of charge, to any person
|
|
||||||
* obtaining a copy of this software and associated documentation
|
|
||||||
* files (the "Software"), to deal in the Software without
|
|
||||||
* restriction, including without limitation the rights to use,
|
|
||||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
|
||||||
* sell copies of the Software, and to permit persons to whom the
|
|
||||||
* Software is furnished to do so, subject to the following
|
|
||||||
* conditions:
|
|
||||||
*
|
|
||||||
* The above copyright notice and this permission notice shall be
|
|
||||||
* included in all copies or substantial portions of the Software.
|
|
||||||
*
|
|
||||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
|
||||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
|
||||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
|
||||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
|
||||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
|
||||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
||||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
|
||||||
* OTHER DEALINGS IN THE SOFTWARE.
|
|
||||||
*/
|
|
||||||
|
|
||||||
/dts-v1/;
|
/dts-v1/;
|
||||||
#include "imx6ul-opos6ul.dtsi"
|
#include "imx6ul-opos6ul.dtsi"
|
||||||
|
#include "imx6ul-imx6ull-opos6uldev.dtsi"
|
||||||
|
|
||||||
/ {
|
/ {
|
||||||
model = "Armadeus Systems OPOS6UL SoM on OPOS6ULDev board";
|
model = "Armadeus Systems OPOS6UL SoM (i.MX6UL) on OPOS6ULDev board";
|
||||||
compatible = "armadeus,opos6uldev", "armadeus,opos6ul", "fsl,imx6ul";
|
compatible = "armadeus,imx6ul-opos6uldev", "armadeus,imx6ul-opos6ul", "fsl,imx6ul";
|
||||||
|
|
||||||
chosen {
|
|
||||||
stdout-path = &uart1;
|
|
||||||
};
|
|
||||||
|
|
||||||
backlight {
|
|
||||||
compatible = "pwm-backlight";
|
|
||||||
pwms = <&pwm3 0 191000>;
|
|
||||||
brightness-levels = <0 4 8 16 32 64 128 255>;
|
|
||||||
default-brightness-level = <7>;
|
|
||||||
power-supply = <®_5v>;
|
|
||||||
status = "okay";
|
|
||||||
};
|
|
||||||
|
|
||||||
gpio-keys {
|
|
||||||
compatible = "gpio-keys";
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&pinctrl_gpio_keys>;
|
|
||||||
|
|
||||||
user-button {
|
|
||||||
label = "User button";
|
|
||||||
gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
|
|
||||||
linux,code = <BTN_MISC>;
|
|
||||||
wakeup-source;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
leds {
|
|
||||||
compatible = "gpio-leds";
|
|
||||||
|
|
||||||
user-led {
|
|
||||||
label = "User";
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&pinctrl_led>;
|
|
||||||
gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
|
|
||||||
linux,default-trigger = "heartbeat";
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
onewire {
|
|
||||||
compatible = "w1-gpio";
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&pinctrl_w1>;
|
|
||||||
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
|
|
||||||
};
|
|
||||||
|
|
||||||
reg_5v: regulator-5v {
|
|
||||||
compatible = "regulator-fixed";
|
|
||||||
regulator-name = "5V";
|
|
||||||
regulator-min-microvolt = <5000000>;
|
|
||||||
regulator-max-microvolt = <5000000>;
|
|
||||||
};
|
|
||||||
|
|
||||||
reg_usbotg1_vbus: regulator-usbotg1vbus {
|
|
||||||
compatible = "regulator-fixed";
|
|
||||||
regulator-name = "usbotg1vbus";
|
|
||||||
regulator-min-microvolt = <5000000>;
|
|
||||||
regulator-max-microvolt = <5000000>;
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&pinctrl_usbotg1_vbus>;
|
|
||||||
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
|
|
||||||
enable-active-high;
|
|
||||||
};
|
|
||||||
|
|
||||||
reg_usbotg2_vbus: regulator-usbotg2vbus {
|
|
||||||
compatible = "regulator-fixed";
|
|
||||||
regulator-name = "usbotg2vbus";
|
|
||||||
regulator-min-microvolt = <5000000>;
|
|
||||||
regulator-max-microvolt = <5000000>;
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&pinctrl_usbotg2_vbus>;
|
|
||||||
gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
|
|
||||||
enable-active-high;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
&adc1 {
|
|
||||||
vref-supply = <®_3v3>;
|
|
||||||
status = "okay";
|
|
||||||
};
|
|
||||||
|
|
||||||
&can1 {
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&pinctrl_flexcan1>;
|
|
||||||
xceiver-supply = <®_5v>;
|
|
||||||
status = "okay";
|
|
||||||
};
|
|
||||||
|
|
||||||
&can2 {
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&pinctrl_flexcan2>;
|
|
||||||
xceiver-supply = <®_5v>;
|
|
||||||
status = "okay";
|
|
||||||
};
|
|
||||||
|
|
||||||
&ecspi4 {
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&pinctrl_ecspi4>;
|
|
||||||
cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>;
|
|
||||||
status = "okay";
|
|
||||||
|
|
||||||
spidev0: spi@0 {
|
|
||||||
compatible = "spidev";
|
|
||||||
reg = <0>;
|
|
||||||
spi-max-frequency = <5000000>;
|
|
||||||
};
|
|
||||||
|
|
||||||
spidev1: spi@1 {
|
|
||||||
compatible = "spidev";
|
|
||||||
reg = <1>;
|
|
||||||
spi-max-frequency = <5000000>;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
&i2c1 {
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&pinctrl_i2c1>;
|
|
||||||
clock_frequency = <400000>;
|
|
||||||
status = "okay";
|
|
||||||
};
|
|
||||||
|
|
||||||
&i2c2 {
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&pinctrl_i2c2>;
|
|
||||||
clock_frequency = <400000>;
|
|
||||||
status = "okay";
|
|
||||||
};
|
|
||||||
|
|
||||||
&lcdif {
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&pinctrl_lcdif>;
|
|
||||||
display = <&display0>;
|
|
||||||
lcd-supply = <®_3v3>;
|
|
||||||
status = "okay";
|
|
||||||
|
|
||||||
display0: display0 {
|
|
||||||
bits-per-pixel = <18>;
|
|
||||||
bus-width = <18>;
|
|
||||||
|
|
||||||
display-timings {
|
|
||||||
timing0: timing0 {
|
|
||||||
clock-frequency = <33000033>;
|
|
||||||
hactive = <800>;
|
|
||||||
vactive = <480>;
|
|
||||||
hback-porch = <96>;
|
|
||||||
hfront-porch = <96>;
|
|
||||||
vback-porch = <20>;
|
|
||||||
vfront-porch = <21>;
|
|
||||||
hsync-len = <64>;
|
|
||||||
vsync-len = <4>;
|
|
||||||
de-active = <1>;
|
|
||||||
pixelclk-active = <1>;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
&pwm3 {
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&pinctrl_pwm3>;
|
|
||||||
status = "okay";
|
|
||||||
};
|
|
||||||
|
|
||||||
&snvs_pwrkey {
|
|
||||||
status = "disabled";
|
|
||||||
};
|
|
||||||
|
|
||||||
&tsc {
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&pinctrl_tsc>;
|
|
||||||
xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
|
|
||||||
measure-delay-time = <0xffff>;
|
|
||||||
pre-charge-time = <0xffff>;
|
|
||||||
status = "okay";
|
|
||||||
};
|
|
||||||
|
|
||||||
&uart1 {
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&pinctrl_uart1>;
|
|
||||||
status = "okay";
|
|
||||||
};
|
|
||||||
|
|
||||||
&uart2 {
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&pinctrl_uart2>;
|
|
||||||
status = "okay";
|
|
||||||
};
|
|
||||||
|
|
||||||
&usbotg1 {
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&pinctrl_usbotg1_id>;
|
|
||||||
vbus-supply = <®_usbotg1_vbus>;
|
|
||||||
dr_mode = "otg";
|
|
||||||
disable-over-current;
|
|
||||||
status = "okay";
|
|
||||||
};
|
|
||||||
|
|
||||||
&usbotg2 {
|
|
||||||
vbus-supply = <®_usbotg2_vbus>;
|
|
||||||
dr_mode = "host";
|
|
||||||
disable-over-current;
|
|
||||||
status = "okay";
|
|
||||||
};
|
};
|
||||||
|
|
||||||
&iomuxc {
|
&iomuxc {
|
||||||
pinctrl-names = "default";
|
pinctrl-0 = <&pinctrl_gpios>, <&pinctrl_tamper_gpios>;
|
||||||
pinctrl-0 = <&pinctrl_gpios>;
|
|
||||||
|
|
||||||
pinctrl_ecspi4: ecspi4grp {
|
pinctrl_tamper_gpios: tampergpiosgrp {
|
||||||
fsl,pins = <
|
fsl,pins = <
|
||||||
MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x1b0b0
|
|
||||||
MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x1b0b0
|
|
||||||
MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x1b0b0
|
|
||||||
MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x1b0b0
|
|
||||||
MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x1b0b0
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
|
|
||||||
pinctrl_flexcan1: flexcan1grp {
|
|
||||||
fsl,pins = <
|
|
||||||
MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0
|
|
||||||
MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
|
|
||||||
pinctrl_flexcan2: flexcan2grp {
|
|
||||||
fsl,pins = <
|
|
||||||
MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0
|
|
||||||
MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
|
|
||||||
pinctrl_gpios: gpiosgrp {
|
|
||||||
fsl,pins = <
|
|
||||||
MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0b0b0
|
|
||||||
MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x0b0b0
|
|
||||||
MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x0b0b0
|
|
||||||
MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0b0b0
|
|
||||||
MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x0b0b0
|
|
||||||
MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0b0b0
|
|
||||||
MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0b0b0
|
|
||||||
MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x0b0b0
|
|
||||||
MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0b0b0
|
MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0b0b0
|
||||||
MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0b0b0
|
MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0b0b0
|
||||||
MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0
|
MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0
|
||||||
@ -304,100 +27,6 @@
|
|||||||
>;
|
>;
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_gpio_keys: gpiokeysgrp {
|
|
||||||
fsl,pins = <
|
|
||||||
MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0b0b0
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
|
|
||||||
pinctrl_i2c1: i2c1grp {
|
|
||||||
fsl,pins = <
|
|
||||||
MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
|
|
||||||
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
|
|
||||||
pinctrl_i2c2: i2c2grp {
|
|
||||||
fsl,pins = <
|
|
||||||
MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
|
|
||||||
MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
|
|
||||||
pinctrl_lcdif: lcdifgrp {
|
|
||||||
fsl,pins = <
|
|
||||||
MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x100b1
|
|
||||||
MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x100b1
|
|
||||||
MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x100b1
|
|
||||||
MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x100b1
|
|
||||||
MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x100b1
|
|
||||||
MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x100b1
|
|
||||||
MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x100b1
|
|
||||||
MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x100b1
|
|
||||||
MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x100b1
|
|
||||||
MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x100b1
|
|
||||||
MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x100b1
|
|
||||||
MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x100b1
|
|
||||||
MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x100b1
|
|
||||||
MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x100b1
|
|
||||||
MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x100b1
|
|
||||||
MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x100b1
|
|
||||||
MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x100b1
|
|
||||||
MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x100b1
|
|
||||||
MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x100b1
|
|
||||||
MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x100b1
|
|
||||||
MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x100b1
|
|
||||||
MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x100b1
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
|
|
||||||
pinctrl_led: ledgrp {
|
|
||||||
fsl,pins = <
|
|
||||||
MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
|
|
||||||
pinctrl_pwm3: pwm3grp {
|
|
||||||
fsl,pins = <
|
|
||||||
MX6UL_PAD_NAND_ALE__PWM3_OUT 0x1b0b0
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
|
|
||||||
pinctrl_tsc: tscgrp {
|
|
||||||
fsl,pins = <
|
|
||||||
MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
|
|
||||||
MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
|
|
||||||
MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
|
|
||||||
MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
|
|
||||||
pinctrl_uart1: uart1grp {
|
|
||||||
fsl,pins = <
|
|
||||||
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
|
|
||||||
MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
|
|
||||||
pinctrl_uart2: uart2grp {
|
|
||||||
fsl,pins = <
|
|
||||||
MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
|
|
||||||
MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
|
|
||||||
pinctrl_usbotg1_id: usbotg1idgrp {
|
|
||||||
fsl,pins = <
|
|
||||||
MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x1b0b0
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
|
|
||||||
pinctrl_usbotg1_vbus: usbotg1vbusgrp {
|
|
||||||
fsl,pins = <
|
|
||||||
MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1b0b0
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
|
|
||||||
pinctrl_usbotg2_vbus: usbotg2vbusgrp {
|
pinctrl_usbotg2_vbus: usbotg2vbusgrp {
|
||||||
fsl,pins = <
|
fsl,pins = <
|
||||||
MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0
|
MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0
|
||||||
|
|||||||
@ -16,9 +16,13 @@
|
|||||||
stdout-path = &uart1;
|
stdout-path = &uart1;
|
||||||
};
|
};
|
||||||
|
|
||||||
memory {
|
/*
|
||||||
|
* Set the minimum memory size here and
|
||||||
|
* let the bootloader set the real size.
|
||||||
|
*/
|
||||||
|
memory@80000000 {
|
||||||
device_type = "memory";
|
device_type = "memory";
|
||||||
reg = <0x80000000 0x20000000>;
|
reg = <0x80000000 0x8000000>;
|
||||||
};
|
};
|
||||||
|
|
||||||
gpio_leds_som: leds {
|
gpio_leds_som: leds {
|
||||||
@ -64,13 +68,17 @@
|
|||||||
};
|
};
|
||||||
|
|
||||||
&i2c1 {
|
&i2c1 {
|
||||||
pinctrl-names = "default";
|
pinctrl-names = "default", "gpio";
|
||||||
pinctrl-0 = <&pinctrl_i2c1>;
|
pinctrl-0 = <&pinctrl_i2c1>;
|
||||||
|
pinctrl-1 = <&pinctrl_i2c1_gpio>;
|
||||||
|
scl-gpios = <&gpio1 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||||
|
sda-gpios = <&gpio1 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
|
||||||
clock-frequency = <100000>;
|
clock-frequency = <100000>;
|
||||||
status = "okay";
|
status = "okay";
|
||||||
|
|
||||||
eeprom@52 {
|
eeprom@52 {
|
||||||
compatible = "catalyst,24c32", "atmel,24c32";
|
compatible = "catalyst,24c32", "atmel,24c32";
|
||||||
|
pagesize = <32>;
|
||||||
reg = <0x52>;
|
reg = <0x52>;
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
@ -142,6 +150,13 @@
|
|||||||
>;
|
>;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
pinctrl_i2c1_gpio: i2cgpiogrp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x4001b8b0
|
||||||
|
MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x4001b8b0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
pinctrl_uart1: uart1grp {
|
pinctrl_uart1: uart1grp {
|
||||||
fsl,pins = <
|
fsl,pins = <
|
||||||
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
|
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
|
||||||
|
|||||||
@ -9,6 +9,8 @@
|
|||||||
#include "imx6ul-phytec-phycore-som.dtsi"
|
#include "imx6ul-phytec-phycore-som.dtsi"
|
||||||
#include "imx6ul-phytec-segin.dtsi"
|
#include "imx6ul-phytec-segin.dtsi"
|
||||||
#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
|
#include "imx6ul-phytec-segin-peb-eval-01.dtsi"
|
||||||
|
#include "imx6ul-phytec-segin-peb-av-02.dtsi"
|
||||||
|
#include "imx6ul-phytec-segin-peb-wlbt-05.dtsi"
|
||||||
|
|
||||||
/ {
|
/ {
|
||||||
model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with NAND";
|
model = "PHYTEC phyBOARD-Segin i.MX6 UltraLite Full Featured with NAND";
|
||||||
|
|||||||
150
arch/arm/dts/imx6ul-phytec-segin-peb-av-02.dtsi
Normal file
150
arch/arm/dts/imx6ul-phytec-segin-peb-av-02.dtsi
Normal file
@ -0,0 +1,150 @@
|
|||||||
|
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2016, 2020 PHYTEC Messtechnik
|
||||||
|
* Author: Christian Hemp <c.hemp@phytec.de>
|
||||||
|
* Author: Stefan Riedmueller <s.riedmueller@phytec.de>
|
||||||
|
*/
|
||||||
|
|
||||||
|
/ {
|
||||||
|
backlight_lcd: backlight-lcd {
|
||||||
|
compatible = "pwm-backlight";
|
||||||
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
||||||
|
default-brightness-level = <5>;
|
||||||
|
power-supply = <®_backlight_en>;
|
||||||
|
pwms = <&pwm3 0 5000000 0>;
|
||||||
|
status = "disabled";
|
||||||
|
};
|
||||||
|
|
||||||
|
lcd_panel: lcd-panel {
|
||||||
|
compatible = "edt,etm0700g0edh6";
|
||||||
|
backlight = <&backlight_lcd>;
|
||||||
|
status = "disabled";
|
||||||
|
|
||||||
|
port {
|
||||||
|
lcd_panel_in: endpoint {
|
||||||
|
remote-endpoint = <&lcdif_parallel_out>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
reg_backlight_en: regulator-backlight-en {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_backlight_en>;
|
||||||
|
regulator-name = "backlight-lcd";
|
||||||
|
regulator-min-microvolt = <3300000>;
|
||||||
|
regulator-max-microvolt = <3300000>;
|
||||||
|
gpio = <&gpio1 18 GPIO_ACTIVE_HIGH>;
|
||||||
|
enable-active-high;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&i2c1 {
|
||||||
|
edt_ft5406: touchscreen@38 {
|
||||||
|
compatible = "edt,edt-ft5406";
|
||||||
|
reg = <0x38>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_edt_ft5406>;
|
||||||
|
interrupt-parent = <&gpio5>;
|
||||||
|
interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
|
||||||
|
wakeup-source;
|
||||||
|
status = "disabled";
|
||||||
|
};
|
||||||
|
|
||||||
|
stmpe: touchscreen@44 {
|
||||||
|
compatible = "st,stmpe811";
|
||||||
|
reg = <0x44>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_stmpe>;
|
||||||
|
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
||||||
|
interrupt-parent = <&gpio5>;
|
||||||
|
wakeup-source;
|
||||||
|
status = "disabled";
|
||||||
|
|
||||||
|
stmpe_touchscreen {
|
||||||
|
compatible = "st,stmpe-ts";
|
||||||
|
st,sample-time = <4>;
|
||||||
|
st,mod-12b = <1>;
|
||||||
|
st,ref-sel = <0>;
|
||||||
|
st,adc-freq = <1>;
|
||||||
|
st,ave-ctrl = <1>;
|
||||||
|
st,touch-det-delay = <2>;
|
||||||
|
st,settling = <2>;
|
||||||
|
st,fraction-z = <7>;
|
||||||
|
st,i-drive = <1>;
|
||||||
|
touchscreen-inverted-x;
|
||||||
|
touchscreen-inverted-y;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&lcdif {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_lcdif_dat>;
|
||||||
|
status = "disabled";
|
||||||
|
|
||||||
|
port {
|
||||||
|
lcdif_parallel_out: endpoint {
|
||||||
|
remote-endpoint = <&lcd_panel_in>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&pwm3 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_pwm3>;
|
||||||
|
status = "disabled";
|
||||||
|
};
|
||||||
|
|
||||||
|
&iomuxc {
|
||||||
|
pinctrl_edt_ft5406: edtft5406grp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_backlight_en: bachlightengrp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x1b0b0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_lcdif_dat: lcdifdatgrp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x59
|
||||||
|
MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x59
|
||||||
|
MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x59
|
||||||
|
MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x59
|
||||||
|
MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x59
|
||||||
|
MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x59
|
||||||
|
MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x59
|
||||||
|
MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x59
|
||||||
|
MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x59
|
||||||
|
MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x59
|
||||||
|
MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x59
|
||||||
|
MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x59
|
||||||
|
MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x59
|
||||||
|
MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x59
|
||||||
|
MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x59
|
||||||
|
MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x59
|
||||||
|
MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x59
|
||||||
|
MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x59
|
||||||
|
MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x59
|
||||||
|
MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x59
|
||||||
|
MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x59
|
||||||
|
MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x59
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_pwm3: pwm3grp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x0b0b0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_stmpe: stmpegrp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
};
|
||||||
90
arch/arm/dts/imx6ul-phytec-segin-peb-wlbt-05.dtsi
Normal file
90
arch/arm/dts/imx6ul-phytec-segin-peb-wlbt-05.dtsi
Normal file
@ -0,0 +1,90 @@
|
|||||||
|
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2021 PHYTEC Messtechnik GmbH
|
||||||
|
* Author: Yunus Bas <y.bas@phytec.de>
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include <dt-bindings/gpio/gpio.h>
|
||||||
|
#include <dt-bindings/interrupt-controller/irq.h>
|
||||||
|
|
||||||
|
/ {
|
||||||
|
reg_wl_en: regulator-wl-en {
|
||||||
|
compatible = "regulator-fixed";
|
||||||
|
regulator-name = "wlan_en";
|
||||||
|
regulator-min-microvolt = <3300000>;
|
||||||
|
regulator-max-microvolt = <3300000>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_wl>;
|
||||||
|
gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
|
||||||
|
enable-active-high;
|
||||||
|
startup-delay-us = <100>;
|
||||||
|
status = "disabled";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&iomuxc {
|
||||||
|
pinctrl_bt: btgrp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0x3031 /* BT ENABLE */
|
||||||
|
MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0x3031 /* HOST WAKEUP */
|
||||||
|
MX6UL_PAD_JTAG_MOD__GPIO1_IO10 0x3031 /* DEV WAKEUP */
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_uart2_bt: uart2grp-bt {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x17059
|
||||||
|
MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x17059
|
||||||
|
MX6UL_PAD_UART2_CTS_B__UART2_DCE_CTS 0x17059
|
||||||
|
MX6UL_PAD_UART2_RTS_B__UART2_DCE_RTS 0x17059
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_usdhc2_wl: usdhc2grp-wl {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_LCD_DATA18__USDHC2_CMD 0x10051
|
||||||
|
MX6UL_PAD_LCD_DATA19__USDHC2_CLK 0x10061
|
||||||
|
MX6UL_PAD_LCD_DATA20__USDHC2_DATA0 0x10051
|
||||||
|
MX6UL_PAD_LCD_DATA21__USDHC2_DATA1 0x10051
|
||||||
|
MX6UL_PAD_LCD_DATA22__USDHC2_DATA2 0x10051
|
||||||
|
MX6UL_PAD_LCD_DATA23__USDHC2_DATA3 0x10051
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_wl: wlgrp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x3031 /* WLAN ENABLE */
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&uart2 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_uart2_bt &pinctrl_bt>;
|
||||||
|
uart-has-rtscts;
|
||||||
|
status = "disabled";
|
||||||
|
|
||||||
|
bluetooth {
|
||||||
|
compatible = "brcm,bcm43438-bt";
|
||||||
|
shutdown-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
|
||||||
|
device-wakeup-gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
|
||||||
|
host-wakeup-gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
&usdhc2 {
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pinctrl_usdhc2_wl>;
|
||||||
|
vmmc-supply = <®_wl_en>;
|
||||||
|
bus-width = <4>;
|
||||||
|
non-removable;
|
||||||
|
no-1-8-v;
|
||||||
|
status = "disabled";
|
||||||
|
|
||||||
|
brmcf: wifi@1 {
|
||||||
|
compatible = "brcm,bcm4329-fmac";
|
||||||
|
reg = <1>;
|
||||||
|
};
|
||||||
|
};
|
||||||
@ -106,7 +106,7 @@
|
|||||||
&ecspi3 {
|
&ecspi3 {
|
||||||
pinctrl-names = "default";
|
pinctrl-names = "default";
|
||||||
pinctrl-0 = <&pinctrl_ecspi3>;
|
pinctrl-0 = <&pinctrl_ecspi3>;
|
||||||
cs-gpios = <&gpio1 20 GPIO_ACTIVE_HIGH>;
|
cs-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
@ -130,31 +130,6 @@
|
|||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
stmpe: touchscreen@44 {
|
|
||||||
compatible = "st,stmpe811";
|
|
||||||
reg = <0x44>;
|
|
||||||
interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
|
|
||||||
interrupt-parent = <&gpio5>;
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&pinctrl_stmpe>;
|
|
||||||
status = "disabled";
|
|
||||||
|
|
||||||
touchscreen {
|
|
||||||
compatible = "st,stmpe-ts";
|
|
||||||
st,sample-time = <4>;
|
|
||||||
st,mod-12b = <1>;
|
|
||||||
st,ref-sel = <0>;
|
|
||||||
st,adc-freq = <1>;
|
|
||||||
st,ave-ctrl = <1>;
|
|
||||||
st,touch-det-delay = <2>;
|
|
||||||
st,settling = <2>;
|
|
||||||
st,fraction-z = <7>;
|
|
||||||
st,i-drive = <1>;
|
|
||||||
touchscreen-inverted-x = <1>;
|
|
||||||
touchscreen-inverted-y = <1>;
|
|
||||||
};
|
|
||||||
};
|
|
||||||
|
|
||||||
i2c_rtc: rtc@68 {
|
i2c_rtc: rtc@68 {
|
||||||
pinctrl-names = "default";
|
pinctrl-names = "default";
|
||||||
pinctrl-0 = <&pinctrl_rtc_int>;
|
pinctrl-0 = <&pinctrl_rtc_int>;
|
||||||
@ -176,12 +151,6 @@
|
|||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
&pwm3 {
|
|
||||||
pinctrl-names = "default";
|
|
||||||
pinctrl-0 = <&pinctrl_pwm3>;
|
|
||||||
status = "disabled";
|
|
||||||
};
|
|
||||||
|
|
||||||
&sai2 {
|
&sai2 {
|
||||||
pinctrl-names = "default";
|
pinctrl-names = "default";
|
||||||
pinctrl-0 = <&pinctrl_sai2>;
|
pinctrl-0 = <&pinctrl_sai2>;
|
||||||
@ -222,6 +191,7 @@
|
|||||||
no-1-8-v;
|
no-1-8-v;
|
||||||
keep-power-in-suspend;
|
keep-power-in-suspend;
|
||||||
wakeup-source;
|
wakeup-source;
|
||||||
|
disable-wp;
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
@ -267,12 +237,6 @@
|
|||||||
>;
|
>;
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_pwm3: pwm3grp {
|
|
||||||
fsl,pins = <
|
|
||||||
MX6UL_PAD_GPIO1_IO04__PWM3_OUT 0x0b0b0
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
|
|
||||||
pinctrl_rtc_int: rtcintgrp {
|
pinctrl_rtc_int: rtcintgrp {
|
||||||
fsl,pins = <
|
fsl,pins = <
|
||||||
MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059
|
MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059
|
||||||
@ -289,12 +253,6 @@
|
|||||||
>;
|
>;
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_stmpe: stmpegrp {
|
|
||||||
fsl,pins = <
|
|
||||||
MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
|
|
||||||
pinctrl_uart5: uart5grp {
|
pinctrl_uart5: uart5grp {
|
||||||
fsl,pins = <
|
fsl,pins = <
|
||||||
MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1
|
MX6UL_PAD_UART5_TX_DATA__UART5_DCE_TX 0x1b0b1
|
||||||
|
|||||||
@ -43,7 +43,7 @@
|
|||||||
};
|
};
|
||||||
|
|
||||||
&i2c2 {
|
&i2c2 {
|
||||||
clock_frequency = <100000>;
|
clock-frequency = <100000>;
|
||||||
pinctrl-names = "default";
|
pinctrl-names = "default";
|
||||||
pinctrl-0 = <&pinctrl_i2c2>;
|
pinctrl-0 = <&pinctrl_i2c2>;
|
||||||
status = "okay";
|
status = "okay";
|
||||||
|
|||||||
@ -43,7 +43,7 @@
|
|||||||
};
|
};
|
||||||
|
|
||||||
&i2c2 {
|
&i2c2 {
|
||||||
clock_frequency = <100000>;
|
clock-frequency = <100000>;
|
||||||
pinctrl-names = "default";
|
pinctrl-names = "default";
|
||||||
pinctrl-0 = <&pinctrl_i2c2>;
|
pinctrl-0 = <&pinctrl_i2c2>;
|
||||||
status = "okay";
|
status = "okay";
|
||||||
@ -58,7 +58,7 @@
|
|||||||
};
|
};
|
||||||
|
|
||||||
&i2c3 {
|
&i2c3 {
|
||||||
clock_frequency = <100000>;
|
clock-frequency = <100000>;
|
||||||
pinctrl-names = "default";
|
pinctrl-names = "default";
|
||||||
pinctrl-0 = <&pinctrl_i2c3>;
|
pinctrl-0 = <&pinctrl_i2c3>;
|
||||||
status = "okay";
|
status = "okay";
|
||||||
|
|||||||
@ -20,7 +20,7 @@
|
|||||||
stdout-path = &uart6;
|
stdout-path = &uart6;
|
||||||
};
|
};
|
||||||
|
|
||||||
backlight {
|
backlight: backlight {
|
||||||
compatible = "pwm-backlight";
|
compatible = "pwm-backlight";
|
||||||
pwms = <&pwm3 0 5000000>;
|
pwms = <&pwm3 0 5000000>;
|
||||||
brightness-levels = <0 4 8 16 32 64 128 255>;
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
||||||
@ -72,6 +72,17 @@
|
|||||||
regulator-max-microvolt = <3300000>;
|
regulator-max-microvolt = <3300000>;
|
||||||
startup-delay-us = <200000>;
|
startup-delay-us = <200000>;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
panel {
|
||||||
|
compatible = "vxt,vl050-8048nt-c01";
|
||||||
|
backlight = <&backlight>;
|
||||||
|
|
||||||
|
port {
|
||||||
|
panel_in: endpoint {
|
||||||
|
remote-endpoint = <&display_out>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
&can1 {
|
&can1 {
|
||||||
@ -154,36 +165,17 @@
|
|||||||
&lcdif {
|
&lcdif {
|
||||||
pinctrl-names = "default";
|
pinctrl-names = "default";
|
||||||
pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
|
pinctrl-0 = <&pinctrl_lcdif_dat &pinctrl_lcdif_ctrl>;
|
||||||
display = <&display0>;
|
|
||||||
status = "okay";
|
status = "okay";
|
||||||
|
|
||||||
display0: display0 {
|
port {
|
||||||
bits-per-pixel = <32>;
|
display_out: endpoint {
|
||||||
bus-width = <24>;
|
remote-endpoint = <&panel_in>;
|
||||||
|
|
||||||
display-timings {
|
|
||||||
native-mode = <&timing0>;
|
|
||||||
|
|
||||||
timing0: timing0 {
|
|
||||||
clock-frequency = <33200000>;
|
|
||||||
hactive = <800>;
|
|
||||||
vactive = <480>;
|
|
||||||
hfront-porch = <210>;
|
|
||||||
hback-porch = <46>;
|
|
||||||
hsync-len = <1>;
|
|
||||||
vback-porch = <22>;
|
|
||||||
vfront-porch = <23>;
|
|
||||||
vsync-len = <1>;
|
|
||||||
hsync-active = <0>;
|
|
||||||
vsync-active = <0>;
|
|
||||||
de-active = <1>;
|
|
||||||
pixelclk-active = <0>;
|
|
||||||
};
|
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
&pwm3 {
|
&pwm3 {
|
||||||
|
#pwm-cells = <2>;
|
||||||
pinctrl-names = "default";
|
pinctrl-names = "default";
|
||||||
pinctrl-0 = <&pinctrl_pwm3>;
|
pinctrl-0 = <&pinctrl_pwm3>;
|
||||||
status = "okay";
|
status = "okay";
|
||||||
|
|||||||
@ -43,15 +43,14 @@
|
|||||||
sai1 = &sai1;
|
sai1 = &sai1;
|
||||||
sai2 = &sai2;
|
sai2 = &sai2;
|
||||||
sai3 = &sai3;
|
sai3 = &sai3;
|
||||||
spi0 = &qspi;
|
spi0 = &ecspi1;
|
||||||
spi1 = &ecspi1;
|
spi1 = &ecspi2;
|
||||||
spi2 = &ecspi2;
|
spi2 = &ecspi3;
|
||||||
spi3 = &ecspi3;
|
spi3 = &ecspi4;
|
||||||
spi4 = &ecspi4;
|
|
||||||
usbphy0 = &usbphy1;
|
|
||||||
usbphy1 = &usbphy2;
|
|
||||||
usb0 = &usbotg1;
|
usb0 = &usbotg1;
|
||||||
usb1 = &usbotg2;
|
usb1 = &usbotg2;
|
||||||
|
usbphy0 = &usbphy1;
|
||||||
|
usbphy1 = &usbphy2;
|
||||||
};
|
};
|
||||||
|
|
||||||
cpus {
|
cpus {
|
||||||
@ -62,6 +61,7 @@
|
|||||||
compatible = "arm,cortex-a7";
|
compatible = "arm,cortex-a7";
|
||||||
device_type = "cpu";
|
device_type = "cpu";
|
||||||
reg = <0>;
|
reg = <0>;
|
||||||
|
clock-frequency = <696000000>;
|
||||||
clock-latency = <61036>; /* two CLK32 periods */
|
clock-latency = <61036>; /* two CLK32 periods */
|
||||||
#cooling-cells = <2>;
|
#cooling-cells = <2>;
|
||||||
operating-points = <
|
operating-points = <
|
||||||
@ -95,18 +95,6 @@
|
|||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
intc: interrupt-controller@a01000 {
|
|
||||||
compatible = "arm,gic-400", "arm,cortex-a7-gic";
|
|
||||||
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
|
|
||||||
#interrupt-cells = <3>;
|
|
||||||
interrupt-controller;
|
|
||||||
interrupt-parent = <&intc>;
|
|
||||||
reg = <0x00a01000 0x1000>,
|
|
||||||
<0x00a02000 0x2000>,
|
|
||||||
<0x00a04000 0x2000>,
|
|
||||||
<0x00a06000 0x2000>;
|
|
||||||
};
|
|
||||||
|
|
||||||
timer {
|
timer {
|
||||||
compatible = "arm,armv7-timer";
|
compatible = "arm,armv7-timer";
|
||||||
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
|
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
|
||||||
@ -145,16 +133,6 @@
|
|||||||
clock-output-names = "ipp_di1";
|
clock-output-names = "ipp_di1";
|
||||||
};
|
};
|
||||||
|
|
||||||
tempmon: tempmon {
|
|
||||||
compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
|
|
||||||
interrupt-parent = <&gpc>;
|
|
||||||
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
|
|
||||||
fsl,tempmon = <&anatop>;
|
|
||||||
nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
|
|
||||||
nvmem-cell-names = "calib", "temp_grade";
|
|
||||||
clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
|
|
||||||
};
|
|
||||||
|
|
||||||
pmu {
|
pmu {
|
||||||
compatible = "arm,cortex-a7-pmu";
|
compatible = "arm,cortex-a7-pmu";
|
||||||
interrupt-parent = <&gpc>;
|
interrupt-parent = <&gpc>;
|
||||||
@ -173,6 +151,18 @@
|
|||||||
reg = <0x00900000 0x20000>;
|
reg = <0x00900000 0x20000>;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
intc: interrupt-controller@a01000 {
|
||||||
|
compatible = "arm,gic-400", "arm,cortex-a7-gic";
|
||||||
|
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_HIGH)>;
|
||||||
|
#interrupt-cells = <3>;
|
||||||
|
interrupt-controller;
|
||||||
|
interrupt-parent = <&intc>;
|
||||||
|
reg = <0x00a01000 0x1000>,
|
||||||
|
<0x00a02000 0x2000>,
|
||||||
|
<0x00a04000 0x2000>,
|
||||||
|
<0x00a06000 0x2000>;
|
||||||
|
};
|
||||||
|
|
||||||
dma_apbh: dma-apbh@1804000 {
|
dma_apbh: dma-apbh@1804000 {
|
||||||
compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
|
compatible = "fsl,imx6q-dma-apbh", "fsl,imx28-dma-apbh";
|
||||||
reg = <0x01804000 0x2000>;
|
reg = <0x01804000 0x2000>;
|
||||||
@ -186,7 +176,7 @@
|
|||||||
clocks = <&clks IMX6UL_CLK_APBHDMA>;
|
clocks = <&clks IMX6UL_CLK_APBHDMA>;
|
||||||
};
|
};
|
||||||
|
|
||||||
gpmi: gpmi-nand@1806000 {
|
gpmi: nand-controller@1806000 {
|
||||||
compatible = "fsl,imx6q-gpmi-nand";
|
compatible = "fsl,imx6q-gpmi-nand";
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
#size-cells = <1>;
|
#size-cells = <1>;
|
||||||
@ -229,6 +219,8 @@
|
|||||||
clocks = <&clks IMX6UL_CLK_ECSPI1>,
|
clocks = <&clks IMX6UL_CLK_ECSPI1>,
|
||||||
<&clks IMX6UL_CLK_ECSPI1>;
|
<&clks IMX6UL_CLK_ECSPI1>;
|
||||||
clock-names = "ipg", "per";
|
clock-names = "ipg", "per";
|
||||||
|
dmas = <&sdma 3 7 1>, <&sdma 4 7 2>;
|
||||||
|
dma-names = "rx", "tx";
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
@ -241,6 +233,8 @@
|
|||||||
clocks = <&clks IMX6UL_CLK_ECSPI2>,
|
clocks = <&clks IMX6UL_CLK_ECSPI2>,
|
||||||
<&clks IMX6UL_CLK_ECSPI2>;
|
<&clks IMX6UL_CLK_ECSPI2>;
|
||||||
clock-names = "ipg", "per";
|
clock-names = "ipg", "per";
|
||||||
|
dmas = <&sdma 5 7 1>, <&sdma 6 7 2>;
|
||||||
|
dma-names = "rx", "tx";
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
@ -253,6 +247,8 @@
|
|||||||
clocks = <&clks IMX6UL_CLK_ECSPI3>,
|
clocks = <&clks IMX6UL_CLK_ECSPI3>,
|
||||||
<&clks IMX6UL_CLK_ECSPI3>;
|
<&clks IMX6UL_CLK_ECSPI3>;
|
||||||
clock-names = "ipg", "per";
|
clock-names = "ipg", "per";
|
||||||
|
dmas = <&sdma 7 7 1>, <&sdma 8 7 2>;
|
||||||
|
dma-names = "rx", "tx";
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
@ -265,6 +261,8 @@
|
|||||||
clocks = <&clks IMX6UL_CLK_ECSPI4>,
|
clocks = <&clks IMX6UL_CLK_ECSPI4>,
|
||||||
<&clks IMX6UL_CLK_ECSPI4>;
|
<&clks IMX6UL_CLK_ECSPI4>;
|
||||||
clock-names = "ipg", "per";
|
clock-names = "ipg", "per";
|
||||||
|
dmas = <&sdma 9 7 1>, <&sdma 10 7 2>;
|
||||||
|
dma-names = "rx", "tx";
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
@ -345,6 +343,31 @@
|
|||||||
dma-names = "rx", "tx";
|
dma-names = "rx", "tx";
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
asrc: asrc@2034000 {
|
||||||
|
compatible = "fsl,imx6ul-asrc", "fsl,imx53-asrc";
|
||||||
|
reg = <0x2034000 0x4000>;
|
||||||
|
interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
|
clocks = <&clks IMX6UL_CLK_ASRC_IPG>,
|
||||||
|
<&clks IMX6UL_CLK_ASRC_MEM>, <&clks 0>,
|
||||||
|
<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
|
||||||
|
<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
|
||||||
|
<&clks 0>, <&clks 0>, <&clks 0>, <&clks 0>,
|
||||||
|
<&clks IMX6UL_CLK_SPDIF>, <&clks 0>, <&clks 0>,
|
||||||
|
<&clks IMX6UL_CLK_SPBA>;
|
||||||
|
clock-names = "mem", "ipg", "asrck_0",
|
||||||
|
"asrck_1", "asrck_2", "asrck_3", "asrck_4",
|
||||||
|
"asrck_5", "asrck_6", "asrck_7", "asrck_8",
|
||||||
|
"asrck_9", "asrck_a", "asrck_b", "asrck_c",
|
||||||
|
"asrck_d", "asrck_e", "asrck_f", "spba";
|
||||||
|
dmas = <&sdma 17 23 1>, <&sdma 18 23 1>, <&sdma 19 23 1>,
|
||||||
|
<&sdma 20 23 1>, <&sdma 21 23 1>, <&sdma 22 23 1>;
|
||||||
|
dma-names = "rxa", "rxb", "rxc",
|
||||||
|
"txa", "txb", "txc";
|
||||||
|
fsl,asrc-rate = <48000>;
|
||||||
|
fsl,asrc-width = <16>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
tsc: tsc@2040000 {
|
tsc: tsc@2040000 {
|
||||||
@ -365,7 +388,7 @@
|
|||||||
clocks = <&clks IMX6UL_CLK_PWM1>,
|
clocks = <&clks IMX6UL_CLK_PWM1>,
|
||||||
<&clks IMX6UL_CLK_PWM1>;
|
<&clks IMX6UL_CLK_PWM1>;
|
||||||
clock-names = "ipg", "per";
|
clock-names = "ipg", "per";
|
||||||
#pwm-cells = <2>;
|
#pwm-cells = <3>;
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
@ -376,7 +399,7 @@
|
|||||||
clocks = <&clks IMX6UL_CLK_PWM2>,
|
clocks = <&clks IMX6UL_CLK_PWM2>,
|
||||||
<&clks IMX6UL_CLK_PWM2>;
|
<&clks IMX6UL_CLK_PWM2>;
|
||||||
clock-names = "ipg", "per";
|
clock-names = "ipg", "per";
|
||||||
#pwm-cells = <2>;
|
#pwm-cells = <3>;
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
@ -387,7 +410,7 @@
|
|||||||
clocks = <&clks IMX6UL_CLK_PWM3>,
|
clocks = <&clks IMX6UL_CLK_PWM3>,
|
||||||
<&clks IMX6UL_CLK_PWM3>;
|
<&clks IMX6UL_CLK_PWM3>;
|
||||||
clock-names = "ipg", "per";
|
clock-names = "ipg", "per";
|
||||||
#pwm-cells = <2>;
|
#pwm-cells = <3>;
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
@ -398,33 +421,33 @@
|
|||||||
clocks = <&clks IMX6UL_CLK_PWM4>,
|
clocks = <&clks IMX6UL_CLK_PWM4>,
|
||||||
<&clks IMX6UL_CLK_PWM4>;
|
<&clks IMX6UL_CLK_PWM4>;
|
||||||
clock-names = "ipg", "per";
|
clock-names = "ipg", "per";
|
||||||
#pwm-cells = <2>;
|
#pwm-cells = <3>;
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
can1: flexcan@2090000 {
|
can1: can@2090000 {
|
||||||
compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
|
compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
|
||||||
reg = <0x02090000 0x4000>;
|
reg = <0x02090000 0x4000>;
|
||||||
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
|
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
|
clocks = <&clks IMX6UL_CLK_CAN1_IPG>,
|
||||||
<&clks IMX6UL_CLK_CAN1_SERIAL>;
|
<&clks IMX6UL_CLK_CAN1_SERIAL>;
|
||||||
clock-names = "ipg", "per";
|
clock-names = "ipg", "per";
|
||||||
fsl,stop-mode = <&gpr 0x10 1 0x10 17>;
|
fsl,stop-mode = <&gpr 0x10 1>;
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
can2: flexcan@2094000 {
|
can2: can@2094000 {
|
||||||
compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
|
compatible = "fsl,imx6ul-flexcan", "fsl,imx6q-flexcan";
|
||||||
reg = <0x02094000 0x4000>;
|
reg = <0x02094000 0x4000>;
|
||||||
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
|
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
clocks = <&clks IMX6UL_CLK_CAN2_IPG>,
|
clocks = <&clks IMX6UL_CLK_CAN2_IPG>,
|
||||||
<&clks IMX6UL_CLK_CAN2_SERIAL>;
|
<&clks IMX6UL_CLK_CAN2_SERIAL>;
|
||||||
clock-names = "ipg", "per";
|
clock-names = "ipg", "per";
|
||||||
fsl,stop-mode = <&gpr 0x10 2 0x10 18>;
|
fsl,stop-mode = <&gpr 0x10 2>;
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
gpt1: gpt@2098000 {
|
gpt1: timer@2098000 {
|
||||||
compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
|
compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
|
||||||
reg = <0x02098000 0x4000>;
|
reg = <0x02098000 0x4000>;
|
||||||
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
|
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
@ -512,12 +535,14 @@
|
|||||||
<&clks IMX6UL_CLK_ENET2_REF_125M>;
|
<&clks IMX6UL_CLK_ENET2_REF_125M>;
|
||||||
clock-names = "ipg", "ahb", "ptp",
|
clock-names = "ipg", "ahb", "ptp",
|
||||||
"enet_clk_ref", "enet_out";
|
"enet_clk_ref", "enet_out";
|
||||||
fsl,num-tx-queues=<1>;
|
fsl,num-tx-queues = <1>;
|
||||||
fsl,num-rx-queues=<1>;
|
fsl,num-rx-queues = <1>;
|
||||||
|
fsl,stop-mode = <&gpr 0x10 4>;
|
||||||
|
fsl,magic-packet;
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
kpp: kpp@20b8000 {
|
kpp: keypad@20b8000 {
|
||||||
compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp";
|
compatible = "fsl,imx6ul-kpp", "fsl,imx6q-kpp", "fsl,imx21-kpp";
|
||||||
reg = <0x020b8000 0x4000>;
|
reg = <0x020b8000 0x4000>;
|
||||||
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
|
interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
@ -525,14 +550,14 @@
|
|||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
wdog1: wdog@20bc000 {
|
wdog1: watchdog@20bc000 {
|
||||||
compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
|
compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
|
||||||
reg = <0x020bc000 0x4000>;
|
reg = <0x020bc000 0x4000>;
|
||||||
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
|
interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
clocks = <&clks IMX6UL_CLK_WDOG1>;
|
clocks = <&clks IMX6UL_CLK_WDOG1>;
|
||||||
};
|
};
|
||||||
|
|
||||||
wdog2: wdog@20c0000 {
|
wdog2: watchdog@20c0000 {
|
||||||
compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
|
compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
|
||||||
reg = <0x020c0000 0x4000>;
|
reg = <0x020c0000 0x4000>;
|
||||||
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
|
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
@ -540,7 +565,7 @@
|
|||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
clks: ccm@20c4000 {
|
clks: clock-controller@20c4000 {
|
||||||
compatible = "fsl,imx6ul-ccm";
|
compatible = "fsl,imx6ul-ccm";
|
||||||
reg = <0x020c4000 0x4000>;
|
reg = <0x020c4000 0x4000>;
|
||||||
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
|
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>,
|
||||||
@ -552,7 +577,7 @@
|
|||||||
|
|
||||||
anatop: anatop@20c8000 {
|
anatop: anatop@20c8000 {
|
||||||
compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
|
compatible = "fsl,imx6ul-anatop", "fsl,imx6q-anatop",
|
||||||
"syscon", "simple-bus";
|
"syscon", "simple-mfd";
|
||||||
reg = <0x020c8000 0x1000>;
|
reg = <0x020c8000 0x1000>;
|
||||||
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
|
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
|
||||||
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
|
<GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
|
||||||
@ -605,6 +630,16 @@
|
|||||||
anatop-min-voltage = <725000>;
|
anatop-min-voltage = <725000>;
|
||||||
anatop-max-voltage = <1450000>;
|
anatop-max-voltage = <1450000>;
|
||||||
};
|
};
|
||||||
|
|
||||||
|
tempmon: tempmon {
|
||||||
|
compatible = "fsl,imx6ul-tempmon", "fsl,imx6sx-tempmon";
|
||||||
|
interrupt-parent = <&gpc>;
|
||||||
|
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
|
fsl,tempmon = <&anatop>;
|
||||||
|
nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
|
||||||
|
nvmem-cell-names = "calib", "temp_grade";
|
||||||
|
clocks = <&clks IMX6UL_CLK_PLL3_USB_OTG>;
|
||||||
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
usbphy1: usbphy@20c9000 {
|
usbphy1: usbphy@20c9000 {
|
||||||
@ -652,6 +687,7 @@
|
|||||||
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
linux,keycode = <KEY_POWER>;
|
linux,keycode = <KEY_POWER>;
|
||||||
wakeup-source;
|
wakeup-source;
|
||||||
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
snvs_lpgpr: snvs-lpgpr {
|
snvs_lpgpr: snvs-lpgpr {
|
||||||
@ -669,7 +705,7 @@
|
|||||||
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
|
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
};
|
};
|
||||||
|
|
||||||
src: src@20d8000 {
|
src: reset-controller@20d8000 {
|
||||||
compatible = "fsl,imx6ul-src", "fsl,imx51-src";
|
compatible = "fsl,imx6ul-src", "fsl,imx51-src";
|
||||||
reg = <0x020d8000 0x4000>;
|
reg = <0x020d8000 0x4000>;
|
||||||
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
|
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
|
||||||
@ -686,7 +722,7 @@
|
|||||||
interrupt-parent = <&intc>;
|
interrupt-parent = <&intc>;
|
||||||
};
|
};
|
||||||
|
|
||||||
iomuxc: iomuxc@20e0000 {
|
iomuxc: pinctrl@20e0000 {
|
||||||
compatible = "fsl,imx6ul-iomuxc";
|
compatible = "fsl,imx6ul-iomuxc";
|
||||||
reg = <0x020e0000 0x4000>;
|
reg = <0x020e0000 0x4000>;
|
||||||
};
|
};
|
||||||
@ -697,13 +733,14 @@
|
|||||||
reg = <0x020e4000 0x4000>;
|
reg = <0x020e4000 0x4000>;
|
||||||
};
|
};
|
||||||
|
|
||||||
gpt2: gpt@20e8000 {
|
gpt2: timer@20e8000 {
|
||||||
compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
|
compatible = "fsl,imx6ul-gpt", "fsl,imx6sx-gpt";
|
||||||
reg = <0x020e8000 0x4000>;
|
reg = <0x020e8000 0x4000>;
|
||||||
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
|
interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
clocks = <&clks IMX6UL_CLK_GPT2_BUS>,
|
clocks = <&clks IMX6UL_CLK_GPT2_BUS>,
|
||||||
<&clks IMX6UL_CLK_GPT2_SERIAL>;
|
<&clks IMX6UL_CLK_GPT2_SERIAL>;
|
||||||
clock-names = "ipg", "per";
|
clock-names = "ipg", "per";
|
||||||
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
sdma: sdma@20ec000 {
|
sdma: sdma@20ec000 {
|
||||||
@ -725,7 +762,7 @@
|
|||||||
clocks = <&clks IMX6UL_CLK_PWM5>,
|
clocks = <&clks IMX6UL_CLK_PWM5>,
|
||||||
<&clks IMX6UL_CLK_PWM5>;
|
<&clks IMX6UL_CLK_PWM5>;
|
||||||
clock-names = "ipg", "per";
|
clock-names = "ipg", "per";
|
||||||
#pwm-cells = <2>;
|
#pwm-cells = <3>;
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
@ -736,7 +773,7 @@
|
|||||||
clocks = <&clks IMX6UL_CLK_PWM6>,
|
clocks = <&clks IMX6UL_CLK_PWM6>,
|
||||||
<&clks IMX6UL_CLK_PWM6>;
|
<&clks IMX6UL_CLK_PWM6>;
|
||||||
clock-names = "ipg", "per";
|
clock-names = "ipg", "per";
|
||||||
#pwm-cells = <2>;
|
#pwm-cells = <3>;
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
@ -747,7 +784,7 @@
|
|||||||
clocks = <&clks IMX6UL_CLK_PWM7>,
|
clocks = <&clks IMX6UL_CLK_PWM7>,
|
||||||
<&clks IMX6UL_CLK_PWM7>;
|
<&clks IMX6UL_CLK_PWM7>;
|
||||||
clock-names = "ipg", "per";
|
clock-names = "ipg", "per";
|
||||||
#pwm-cells = <2>;
|
#pwm-cells = <3>;
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
@ -758,7 +795,7 @@
|
|||||||
clocks = <&clks IMX6UL_CLK_PWM8>,
|
clocks = <&clks IMX6UL_CLK_PWM8>,
|
||||||
<&clks IMX6UL_CLK_PWM8>;
|
<&clks IMX6UL_CLK_PWM8>;
|
||||||
clock-names = "ipg", "per";
|
clock-names = "ipg", "per";
|
||||||
#pwm-cells = <2>;
|
#pwm-cells = <3>;
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
};
|
};
|
||||||
@ -770,7 +807,7 @@
|
|||||||
reg = <0x02100000 0x100000>;
|
reg = <0x02100000 0x100000>;
|
||||||
ranges;
|
ranges;
|
||||||
|
|
||||||
crypto: caam@2140000 {
|
crypto: crypto@2140000 {
|
||||||
compatible = "fsl,imx6ul-caam", "fsl,sec-v4.0";
|
compatible = "fsl,imx6ul-caam", "fsl,sec-v4.0";
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
#size-cells = <1>;
|
#size-cells = <1>;
|
||||||
@ -781,19 +818,19 @@
|
|||||||
<&clks IMX6UL_CLK_CAAM_MEM>;
|
<&clks IMX6UL_CLK_CAAM_MEM>;
|
||||||
clock-names = "ipg", "aclk", "mem";
|
clock-names = "ipg", "aclk", "mem";
|
||||||
|
|
||||||
sec_jr0: jr0@1000 {
|
sec_jr0: jr@1000 {
|
||||||
compatible = "fsl,sec-v4.0-job-ring";
|
compatible = "fsl,sec-v4.0-job-ring";
|
||||||
reg = <0x1000 0x1000>;
|
reg = <0x1000 0x1000>;
|
||||||
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
|
interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
};
|
};
|
||||||
|
|
||||||
sec_jr1: jr1@2000 {
|
sec_jr1: jr@2000 {
|
||||||
compatible = "fsl,sec-v4.0-job-ring";
|
compatible = "fsl,sec-v4.0-job-ring";
|
||||||
reg = <0x2000 0x1000>;
|
reg = <0x2000 0x1000>;
|
||||||
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
|
interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
};
|
};
|
||||||
|
|
||||||
sec_jr2: jr2@3000 {
|
sec_jr2: jr@3000 {
|
||||||
compatible = "fsl,sec-v4.0-job-ring";
|
compatible = "fsl,sec-v4.0-job-ring";
|
||||||
reg = <0x3000 0x1000>;
|
reg = <0x3000 0x1000>;
|
||||||
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
|
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
@ -846,12 +883,14 @@
|
|||||||
<&clks IMX6UL_CLK_ENET_REF>;
|
<&clks IMX6UL_CLK_ENET_REF>;
|
||||||
clock-names = "ipg", "ahb", "ptp",
|
clock-names = "ipg", "ahb", "ptp",
|
||||||
"enet_clk_ref", "enet_out";
|
"enet_clk_ref", "enet_out";
|
||||||
fsl,num-tx-queues=<1>;
|
fsl,num-tx-queues = <1>;
|
||||||
fsl,num-rx-queues=<1>;
|
fsl,num-rx-queues = <1>;
|
||||||
|
fsl,stop-mode = <&gpr 0x10 3>;
|
||||||
|
fsl,magic-packet;
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
usdhc1: usdhc@2190000 {
|
usdhc1: mmc@2190000 {
|
||||||
compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
|
compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
|
||||||
reg = <0x02190000 0x4000>;
|
reg = <0x02190000 0x4000>;
|
||||||
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
|
interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
@ -859,11 +898,13 @@
|
|||||||
<&clks IMX6UL_CLK_USDHC1>,
|
<&clks IMX6UL_CLK_USDHC1>,
|
||||||
<&clks IMX6UL_CLK_USDHC1>;
|
<&clks IMX6UL_CLK_USDHC1>;
|
||||||
clock-names = "ipg", "ahb", "per";
|
clock-names = "ipg", "ahb", "per";
|
||||||
|
fsl,tuning-step = <2>;
|
||||||
|
fsl,tuning-start-tap = <20>;
|
||||||
bus-width = <4>;
|
bus-width = <4>;
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
usdhc2: usdhc@2194000 {
|
usdhc2: mmc@2194000 {
|
||||||
compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
|
compatible = "fsl,imx6ul-usdhc", "fsl,imx6sx-usdhc";
|
||||||
reg = <0x02194000 0x4000>;
|
reg = <0x02194000 0x4000>;
|
||||||
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
|
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
@ -872,6 +913,8 @@
|
|||||||
<&clks IMX6UL_CLK_USDHC2>;
|
<&clks IMX6UL_CLK_USDHC2>;
|
||||||
clock-names = "ipg", "ahb", "per";
|
clock-names = "ipg", "ahb", "per";
|
||||||
bus-width = <4>;
|
bus-width = <4>;
|
||||||
|
fsl,tuning-step = <2>;
|
||||||
|
fsl,tuning-start-tap = <20>;
|
||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
@ -934,7 +977,7 @@
|
|||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
ocotp: ocotp-ctrl@21bc000 {
|
ocotp: efuse@21bc000 {
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
#size-cells = <1>;
|
#size-cells = <1>;
|
||||||
compatible = "fsl,imx6ul-ocotp", "syscon";
|
compatible = "fsl,imx6ul-ocotp", "syscon";
|
||||||
@ -954,6 +997,15 @@
|
|||||||
};
|
};
|
||||||
};
|
};
|
||||||
|
|
||||||
|
csi: csi@21c4000 {
|
||||||
|
compatible = "fsl,imx6ul-csi", "fsl,imx7-csi";
|
||||||
|
reg = <0x021c4000 0x4000>;
|
||||||
|
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
|
clocks = <&clks IMX6UL_CLK_CSI>;
|
||||||
|
clock-names = "mclk";
|
||||||
|
status = "disabled";
|
||||||
|
};
|
||||||
|
|
||||||
lcdif: lcdif@21c8000 {
|
lcdif: lcdif@21c8000 {
|
||||||
compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
|
compatible = "fsl,imx6ul-lcdif", "fsl,imx28-lcdif";
|
||||||
reg = <0x021c8000 0x4000>;
|
reg = <0x021c8000 0x4000>;
|
||||||
@ -965,6 +1017,14 @@
|
|||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
pxp: pxp@21cc000 {
|
||||||
|
compatible = "fsl,imx6ul-pxp";
|
||||||
|
reg = <0x021cc000 0x4000>;
|
||||||
|
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
|
clocks = <&clks IMX6UL_CLK_PXP>;
|
||||||
|
clock-names = "axi";
|
||||||
|
};
|
||||||
|
|
||||||
qspi: spi@21e0000 {
|
qspi: spi@21e0000 {
|
||||||
#address-cells = <1>;
|
#address-cells = <1>;
|
||||||
#size-cells = <0>;
|
#size-cells = <0>;
|
||||||
@ -978,7 +1038,7 @@
|
|||||||
status = "disabled";
|
status = "disabled";
|
||||||
};
|
};
|
||||||
|
|
||||||
wdog3: wdog@21e4000 {
|
wdog3: watchdog@21e4000 {
|
||||||
compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
|
compatible = "fsl,imx6ul-wdt", "fsl,imx21-wdt";
|
||||||
reg = <0x021e4000 0x4000>;
|
reg = <0x021e4000 0x4000>;
|
||||||
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
|
|||||||
@ -7,7 +7,6 @@
|
|||||||
/dts-v1/;
|
/dts-v1/;
|
||||||
#include "imx6ull.dtsi"
|
#include "imx6ull.dtsi"
|
||||||
#include "imx6ull-myir-mys-6ulx.dtsi"
|
#include "imx6ull-myir-mys-6ulx.dtsi"
|
||||||
#include "imx6ull-mys-6ulx-u-boot.dtsi"
|
|
||||||
|
|
||||||
/ {
|
/ {
|
||||||
model = "MYiR i.MX6ULL MYS-6ULX Single Board Computer with NAND";
|
model = "MYiR i.MX6ULL MYS-6ULX Single Board Computer with NAND";
|
||||||
@ -15,5 +14,6 @@
|
|||||||
};
|
};
|
||||||
|
|
||||||
&gpmi {
|
&gpmi {
|
||||||
|
fsl,use-minimum-ecc;
|
||||||
status = "okay";
|
status = "okay";
|
||||||
};
|
};
|
||||||
|
|||||||
@ -9,6 +9,7 @@
|
|||||||
#include "imx6ull-phytec-phycore-som.dtsi"
|
#include "imx6ull-phytec-phycore-som.dtsi"
|
||||||
#include "imx6ull-phytec-segin.dtsi"
|
#include "imx6ull-phytec-segin.dtsi"
|
||||||
#include "imx6ull-phytec-segin-peb-eval-01.dtsi"
|
#include "imx6ull-phytec-segin-peb-eval-01.dtsi"
|
||||||
|
#include "imx6ull-phytec-segin-peb-av-02.dtsi"
|
||||||
|
|
||||||
/ {
|
/ {
|
||||||
model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with eMMC";
|
model = "PHYTEC phyBOARD-Segin i.MX6 ULL Full Featured with eMMC";
|
||||||
|
|||||||
26
arch/arm/dts/imx6ull-phytec-segin-peb-av-02.dtsi
Normal file
26
arch/arm/dts/imx6ull-phytec-segin-peb-av-02.dtsi
Normal file
@ -0,0 +1,26 @@
|
|||||||
|
// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
|
||||||
|
/*
|
||||||
|
* Copyright (C) 2018 PHYTEC Messtechnik GmbH
|
||||||
|
* Author: Stefan Riedmueller <s.riedmueller@phytec.de>
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "imx6ul-phytec-segin-peb-av-02.dtsi"
|
||||||
|
|
||||||
|
&iomuxc {
|
||||||
|
/delete-node/ edtft5406grp;
|
||||||
|
/delete-node/ stmpegrp;
|
||||||
|
};
|
||||||
|
|
||||||
|
&iomuxc_snvs {
|
||||||
|
pinctrl_edt_ft5406: edtft5406grp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6ULL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x1b0b0
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
|
||||||
|
pinctrl_stmpe: stmpegrp {
|
||||||
|
fsl,pins = <
|
||||||
|
MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059
|
||||||
|
>;
|
||||||
|
};
|
||||||
|
};
|
||||||
@ -14,7 +14,6 @@
|
|||||||
&iomuxc {
|
&iomuxc {
|
||||||
/delete-node/ flexcan1engrp;
|
/delete-node/ flexcan1engrp;
|
||||||
/delete-node/ rtcintgrp;
|
/delete-node/ rtcintgrp;
|
||||||
/delete-node/ stmpegrp;
|
|
||||||
};
|
};
|
||||||
|
|
||||||
&iomuxc_snvs {
|
&iomuxc_snvs {
|
||||||
@ -29,10 +28,4 @@
|
|||||||
MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059
|
MX6ULL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x17059
|
||||||
>;
|
>;
|
||||||
};
|
};
|
||||||
|
|
||||||
pinctrl_stmpe: stmpegrp {
|
|
||||||
fsl,pins = <
|
|
||||||
MX6ULL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x17059
|
|
||||||
>;
|
|
||||||
};
|
|
||||||
};
|
};
|
||||||
|
|||||||
@ -12,6 +12,7 @@
|
|||||||
/delete-node/ &crypto;
|
/delete-node/ &crypto;
|
||||||
|
|
||||||
&cpu0 {
|
&cpu0 {
|
||||||
|
clock-frequency = <900000000>;
|
||||||
operating-points = <
|
operating-points = <
|
||||||
/* kHz uV */
|
/* kHz uV */
|
||||||
900000 1275000
|
900000 1275000
|
||||||
@ -34,6 +35,12 @@
|
|||||||
compatible = "fsl,imx6ull-ocotp", "syscon";
|
compatible = "fsl,imx6ull-ocotp", "syscon";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
&pxp {
|
||||||
|
compatible = "fsl,imx6ull-pxp";
|
||||||
|
interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
|
||||||
|
<GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
|
};
|
||||||
|
|
||||||
&usdhc1 {
|
&usdhc1 {
|
||||||
compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc";
|
compatible = "fsl,imx6ull-usdhc", "fsl,imx6sx-usdhc";
|
||||||
};
|
};
|
||||||
@ -61,6 +68,13 @@
|
|||||||
clock-names = "dcp";
|
clock-names = "dcp";
|
||||||
};
|
};
|
||||||
|
|
||||||
|
rngb: rng@2284000 {
|
||||||
|
compatible = "fsl,imx6ull-rngb", "fsl,imx25-rngb";
|
||||||
|
reg = <0x02284000 0x4000>;
|
||||||
|
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
|
||||||
|
clocks = <&clks IMX6UL_CLK_DUMMY>;
|
||||||
|
};
|
||||||
|
|
||||||
iomuxc_snvs: iomuxc-snvs@2290000 {
|
iomuxc_snvs: iomuxc-snvs@2290000 {
|
||||||
compatible = "fsl,imx6ull-iomuxc-snvs";
|
compatible = "fsl,imx6ull-iomuxc-snvs";
|
||||||
reg = <0x02290000 0x4000>;
|
reg = <0x02290000 0x4000>;
|
||||||
|
|||||||
Loading…
x
Reference in New Issue
Block a user