random-mirrors/smaeul-u-boot
1
0
Fork 0
mirror of https://github.com/smaeul/u-boot.git synced 2025-11-04 05:50:17 +00:00
Code Issues Packages Projects Releases Wiki Activity

board: rockchip: Add Xunlong Orange Pi 5 Plus

Browse Source 
Xunlong Orange Pi 5 Plus is a single-board computer based on the
Rockchip RK3588 SoC. The board provides abundant interfaces, including
two HDMI output ports, one HDMI input port, two 2.5G Ethernet ports,
M.2 M-Key slot, M.2 E-Key slot, two USB 3.0, two USB 2.0, and two Type-C.

Features tested on a Orange Pi 5 Plus 4GB v1.2:
- SD-card boot
- eMMC boot
- SPI Flash boot
- PCIe/NVMe
- USB 2.0 host
- Ethernet

Device tree is imported from linux v6.7-rockchip-dts64-1 tag.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
This commit is contained in:
Jonas Karlman 2023-10-17 21:40:22 +00:00 committed by Kever Yang
parent 28c5f941ed
commit b51cf8bb09
6 changed files with 989 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
arch/arm/dts/Makefile
View File

@ -193,6 +193,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3588) += \
rk3588-evb1-v10.dtb \
rk3588-nanopc-t6.dtb \
rk3588s-orangepi-5.dtb \
rk3588-orangepi-5-plus.dtb \
rk3588s-rock-5a.dtb \
rk3588-rock-5b.dtb

27
arch/arm/dts/rk3588-orangepi-5-plus-u-boot.dtsi Normal file
View File

@ -0,0 +1,27 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
#include "rk3588-u-boot.dtsi"
/ {
chosen {
u-boot,spl-boot-order = "same-as-spl", &sdmmc, &sdhci;
};
};
&fspim1_pins {
bootph-all;
};
&sdhci {
cap-mmc-highspeed;
mmc-hs200-1_8v;
};
&sfc {
bootph-pre-ram;
u-boot,spl-sfc-no-dma;
flash@0 {
bootph-pre-ram;
};
};

848
arch/arm/dts/rk3588-orangepi-5-plus.dts Normal file
View File

@ -0,0 +1,848 @@
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
/*
* Copyright (c) 2023 Ondřej Jirman <megi@xff.cz>
*/
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/leds/common.h>
#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/usb/pd.h>
#include "rk3588.dtsi"
/ {
model = "Xunlong Orange Pi 5 Plus";
compatible = "xunlong,orangepi-5-plus", "rockchip,rk3588";
aliases {
mmc0 = &sdhci;
mmc1 = &sdmmc;
serial2 = &uart2;
};
chosen {
stdout-path = "serial2:1500000n8";
};
adc-keys-0 {
compatible = "adc-keys";
io-channels = <&saradc 0>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1800000>;
poll-interval = <100>;
button-maskrom {
label = "Mask Rom";
linux,code = <KEY_SETUP>;
press-threshold-microvolt = <2000>;
};
};
adc-keys-1 {
compatible = "adc-keys";
io-channels = <&saradc 1>;
io-channel-names = "buttons";
keyup-threshold-microvolt = <1800000>;
poll-interval = <100>;
button-recovery {
label = "Recovery";
linux,code = <KEY_VENDOR>;
press-threshold-microvolt = <2000>;
};
};
speaker_amp: speaker-audio-amplifier {
compatible = "simple-audio-amplifier";
enable-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
sound-name-prefix = "Speaker Amp";
};
headphone_amp: headphones-audio-amplifier {
compatible = "simple-audio-amplifier";
enable-gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
sound-name-prefix = "Headphones Amp";
};
ir-receiver {
compatible = "gpio-ir-receiver";
gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&ir_receiver_pin>;
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-names = "default";
pinctrl-0 = <&blue_led_pin>;
led {
color = <LED_COLOR_ID_BLUE>;
function = LED_FUNCTION_INDICATOR;
function-enumerator = <1>;
gpios = <&gpio3 RK_PA6 GPIO_ACTIVE_HIGH>;
};
};
fan: pwm-fan {
compatible = "pwm-fan";
cooling-levels = <0 70 75 80 100>;
fan-supply = <&vcc5v0_sys>;
pwms = <&pwm3 0 50000 0>;
#cooling-cells = <2>;
};
pwm-leds {
compatible = "pwm-leds";
led {
color = <LED_COLOR_ID_GREEN>;
function = LED_FUNCTION_INDICATOR;
function-enumerator = <2>;
max-brightness = <255>;
pwms = <&pwm2 0 25000 0>;
};
};
sound {
compatible = "simple-audio-card";
pinctrl-names = "default";
pinctrl-0 = <&hp_detect>;
simple-audio-card,name = "Analog";
simple-audio-card,aux-devs = <&speaker_amp>, <&headphone_amp>;
simple-audio-card,format = "i2s";
simple-audio-card,mclk-fs = <256>;
simple-audio-card,hp-det-gpio = <&gpio1 RK_PD3 GPIO_ACTIVE_LOW>;
simple-audio-card,bitclock-master = <&daicpu>;
simple-audio-card,frame-master = <&daicpu>;
/*TODO: SARADC_IN3 is used as MIC detection / key input */
simple-audio-card,widgets =
"Microphone", "Onboard Microphone",
"Microphone", "Microphone Jack",
"Speaker", "Speaker",
"Headphone", "Headphones";
simple-audio-card,routing =
"Headphones", "LOUT1",
"Headphones", "ROUT1",
"Speaker", "LOUT2",
"Speaker", "ROUT2",
"Headphones", "Headphones Amp OUTL",
"Headphones", "Headphones Amp OUTR",
"Headphones Amp INL", "LOUT1",
"Headphones Amp INR", "ROUT1",
"Speaker", "Speaker Amp OUTL",
"Speaker", "Speaker Amp OUTR",
"Speaker Amp INL", "LOUT2",
"Speaker Amp INR", "ROUT2",
/* single ended signal to LINPUT1 */
"LINPUT1", "Microphone Jack",
"RINPUT1", "Microphone Jack",
/* differential signal */
"LINPUT2", "Onboard Microphone",
"RINPUT2", "Onboard Microphone";
daicpu: simple-audio-card,cpu {
sound-dai = <&i2s0_8ch>;
system-clock-frequency = <12288000>;
};
daicodec: simple-audio-card,codec {
sound-dai = <&es8388>;
system-clock-frequency = <12288000>;
};
};
vcc3v3_pcie30: vcc3v3-pcie30-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>;
regulator-name = "vcc3v3_pcie30";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <5000>;
vin-supply = <&vcc5v0_sys>;
};
vcc3v3_pcie_eth: vcc3v3-pcie-eth-regulator {
compatible = "regulator-fixed";
gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
regulator-name = "vcc3v3_pcie_eth";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <50000>;
vin-supply = <&vcc5v0_sys>;
};
vcc3v3_wf: vcc3v3-wf-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpios = <&gpio2 RK_PC5 GPIO_ACTIVE_HIGH>;
regulator-name = "vcc3v3_wf";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
startup-delay-us = <50000>;
vin-supply = <&vcc5v0_sys>;
};
vcc5v0_sys: vcc5v0-sys-regulator {
compatible = "regulator-fixed";
regulator-name = "vcc5v0_sys";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
vcc5v0_usb20: vcc5v0-usb20-regulator {
compatible = "regulator-fixed";
enable-active-high;
gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&vcc5v0_usb20_en>;
regulator-name = "vcc5v0_usb20";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
vin-supply = <&vcc5v0_sys>;
};
};
&combphy0_ps {
status = "okay";
};
&combphy1_ps {
status = "okay";
};
&combphy2_psu {
status = "okay";
};
&cpu_b0 {
cpu-supply = <&vdd_cpu_big0_s0>;
};
&cpu_b1 {
cpu-supply = <&vdd_cpu_big0_s0>;
};
&cpu_b2 {
cpu-supply = <&vdd_cpu_big1_s0>;
};
&cpu_b3 {
cpu-supply = <&vdd_cpu_big1_s0>;
};
&cpu_l0 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l1 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l2 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&cpu_l3 {
cpu-supply = <&vdd_cpu_lit_s0>;
};
&i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0m2_xfer>;
status = "okay";
vdd_cpu_big0_s0: regulator@42 {
compatible = "rockchip,rk8602";
reg = <0x42>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_cpu_big0_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <2300>;
vin-supply = <&vcc5v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_big1_s0: regulator@43 {
compatible = "rockchip,rk8603", "rockchip,rk8602";
reg = <0x43>;
fcs,suspend-voltage-selector = <1>;
regulator-name = "vdd_cpu_big1_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <1050000>;
regulator-ramp-delay = <2300>;
vin-supply = <&vcc5v0_sys>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
&i2c6 {
clock-frequency = <400000>;
status = "okay";
hym8563: rtc@51 {
compatible = "haoyu,hym8563";
reg = <0x51>;
interrupt-parent = <&gpio0>;
interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
#clock-cells = <0>;
clock-output-names = "hym8563";
pinctrl-names = "default";
pinctrl-0 = <&hym8563_int>;
wakeup-source;
};
};
&i2c7 {
status = "okay";
/* PLDO2 vcca 1.8V, BUCK8 gated by PLDO2 being enabled */
es8388: audio-codec@11 {
compatible = "everest,es8388";
reg = <0x11>;
clocks = <&cru I2S0_8CH_MCLKOUT>;
clock-names = "mclk";
AVDD-supply = <&vcc_1v8_s0>;
DVDD-supply = <&vcc_1v8_s0>;
HPVDD-supply = <&vcc_3v3_s0>;
PVDD-supply = <&vcc_3v3_s0>;
assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
assigned-clock-rates = <12288000>;
#sound-dai-cells = <0>;
};
};
&i2s0_8ch {
pinctrl-names = "default";
pinctrl-0 = <&i2s0_lrck
&i2s0_mclk
&i2s0_sclk
&i2s0_sdi0
&i2s0_sdo0>;
status = "okay";
};
&i2s2_2ch {
pinctrl-names = "default";
pinctrl-0 = <&i2s2m0_lrck
&i2s2m0_sclk
&i2s2m0_sdi
&i2s2m0_sdo>;
status = "okay";
};
/* phy1 - M.KEY socket */
&pcie2x1l0 {
reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_wf>;
status = "okay";
};
/* phy2 - right ethernet port */
&pcie2x1l1 {
reset-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie_eth>;
status = "okay";
};
/* phy0 - left ethernet port */
&pcie2x1l2 {
reset-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie_eth>;
status = "okay";
};
&pcie30phy {
status = "okay";
};
&pcie3x4 {
reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
vpcie3v3-supply = <&vcc3v3_pcie30>;
status = "okay";
};
&pinctrl {
hym8563 {
hym8563_int: hym8563-int {
rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
leds {
blue_led_pin: blue-led {
rockchip,pins = <3 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
};
};
ir-receiver {
ir_receiver_pin: ir-receiver-pin {
rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
sound {
hp_detect: hp-detect {
rockchip,pins = <1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
usb {
vcc5v0_usb20_en: vcc5v0-usb20-en {
rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
};
};
};
&pwm2 {
pinctrl-0 = <&pwm2m1_pins>;
pinctrl-names = "default";
status = "okay";
};
&pwm3 {
pinctrl-0 = <&pwm3m1_pins>;
status = "okay";
};
&saradc {
vref-supply = <&vcc_1v8_s0>;
status = "okay";
};
&sdhci {
bus-width = <8>;
no-sdio;
no-sd;
non-removable;
max-frequency = <200000000>;
mmc-hs400-1_8v;
mmc-hs400-enhanced-strobe;
status = "okay";
};
&sdmmc {
bus-width = <4>;
cap-sd-highspeed;
cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
disable-wp;
max-frequency = <150000000>;
no-sdio;
no-mmc;
sd-uhs-sdr104;
vmmc-supply = <&vcc_3v3_s3>;
vqmmc-supply = <&vccio_sd_s0>;
status = "okay";
};
&sfc {
pinctrl-names = "default";
pinctrl-0 = <&fspim1_pins>;
status = "okay";
spi_flash: flash@0 {
compatible = "jedec,spi-nor";
reg = <0x0>;
spi-max-frequency = <100000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <1>;
};
};
&spi2 {
assigned-clocks = <&cru CLK_SPI2>;
assigned-clock-rates = <200000000>;
num-cs = <1>;
pinctrl-names = "default";
pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
status = "okay";
pmic@0 {
compatible = "rockchip,rk806";
reg = <0x0>;
interrupt-parent = <&gpio0>;
interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
<&rk806_dvs2_null>, <&rk806_dvs3_null>;
spi-max-frequency = <1000000>;
vcc1-supply = <&vcc5v0_sys>;
vcc2-supply = <&vcc5v0_sys>;
vcc3-supply = <&vcc5v0_sys>;
vcc4-supply = <&vcc5v0_sys>;
vcc5-supply = <&vcc5v0_sys>;
vcc6-supply = <&vcc5v0_sys>;
vcc7-supply = <&vcc5v0_sys>;
vcc8-supply = <&vcc5v0_sys>;
vcc9-supply = <&vcc5v0_sys>;
vcc10-supply = <&vcc5v0_sys>;
vcc11-supply = <&vcc_2v0_pldo_s3>;
vcc12-supply = <&vcc5v0_sys>;
vcc13-supply = <&vdd2_ddr_s3>;
vcc14-supply = <&vdd2_ddr_s3>;
vcca-supply = <&vcc5v0_sys>;
gpio-controller;
#gpio-cells = <2>;
rk806_dvs1_null: dvs1-null-pins {
pins = "gpio_pwrctrl2";
function = "pin_fun0";
};
rk806_dvs2_null: dvs2-null-pins {
pins = "gpio_pwrctrl2";
function = "pin_fun0";
};
rk806_dvs3_null: dvs3-null-pins {
pins = "gpio_pwrctrl3";
function = "pin_fun0";
};
regulators {
vdd_gpu_s0: dcdc-reg1 {
regulator-name = "vdd_gpu_s0";
regulator-boot-on;
regulator-enable-ramp-delay = <400>;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_cpu_lit_s0: dcdc-reg2 {
regulator-name = "vdd_cpu_lit_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <950000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_log_s0: dcdc-reg3 {
regulator-name = "vdd_log_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <825000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <750000>;
};
};
vdd_vdenc_s0: dcdc-reg4 {
regulator-name = "vdd_vdenc_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <550000>;
regulator-max-microvolt = <825000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_ddr_s0: dcdc-reg5 {
regulator-name = "vdd_ddr_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <675000>;
regulator-max-microvolt = <900000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <850000>;
};
};
vdd2_ddr_s3: dcdc-reg6 {
regulator-name = "vdd2_ddr_s3";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-on-in-suspend;
};
};
vcc_2v0_pldo_s3: dcdc-reg7 {
regulator-name = "vdd_2v0_pldo_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <2000000>;
};
};
vcc_3v3_s3: dcdc-reg8 {
regulator-name = "vcc_3v3_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <3300000>;
};
};
vddq_ddr_s0: dcdc-reg9 {
regulator-name = "vddq_ddr_s0";
regulator-always-on;
regulator-boot-on;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_1v8_s3: dcdc-reg10 {
regulator-name = "vcc_1v8_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
avcc_1v8_s0: pldo-reg1 {
regulator-name = "avcc_1v8_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
/* shorted to avcc_1v8_s0 on the board */
vcc_1v8_s0: pldo-reg2 {
regulator-name = "vcc_1v8_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
avdd_1v2_s0: pldo-reg3 {
regulator-name = "avdd_1v2_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vcc_3v3_s0: pldo-reg4 {
regulator-name = "vcc_3v3_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vccio_sd_s0: pldo-reg5 {
regulator-name = "vccio_sd_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
regulator-ramp-delay = <12500>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
pldo6_s3: pldo-reg6 {
regulator-name = "pldo6_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <1800000>;
};
};
vdd_0v75_s3: nldo-reg1 {
regulator-name = "vdd_0v75_s3";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-state-mem {
regulator-on-in-suspend;
regulator-suspend-microvolt = <750000>;
};
};
vdd_ddr_pll_s0: nldo-reg2 {
regulator-name = "vdd_ddr_pll_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-state-mem {
regulator-off-in-suspend;
regulator-suspend-microvolt = <850000>;
};
};
avdd_0v75_s0: nldo-reg3 {
regulator-name = "avdd_0v75_s0";
regulator-always-on;
regulator-boot-on;
/*
* The schematic mentions that actual setting
* should be 0.8375V. RK3588 datasheet specifies
* maximum as 0.825V. So we set datasheet max
* here.
*/
regulator-min-microvolt = <825000>;
regulator-max-microvolt = <825000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_0v85_s0: nldo-reg4 {
regulator-name = "vdd_0v85_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <850000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
vdd_0v75_s0: nldo-reg5 {
regulator-name = "vdd_0v75_s0";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
regulator-max-microvolt = <750000>;
regulator-state-mem {
regulator-off-in-suspend;
};
};
};
};
};
&tsadc {
status = "okay";
};
&u2phy2 {
status = "okay";
};
&u2phy3 {
status = "okay";
};
&u2phy2_host {
phy-supply = <&vcc5v0_usb20>;
status = "okay";
};
&u2phy3_host {
phy-supply = <&vcc5v0_usb20>;
status = "okay";
};
&uart2 {
pinctrl-0 = <&uart2m0_xfer>;
status = "okay";
};
&uart9 {
pinctrl-0 = <&uart9m0_xfer>;
status = "okay";
};
&usb_host0_ehci {
status = "okay";
};
&usb_host0_ohci {
status = "okay";
};
&usb_host1_ehci {
status = "okay";
};
&usb_host1_ohci {
status = "okay";
};

7
board/rockchip/evb_rk3588/MAINTAINERS
View File

@ -13,3 +13,10 @@ S: Maintained
F: configs/orangepi-5-rk3588s_defconfig
F: arch/arm/dts/rk3588s-orangepi-5.dts
F: arch/arm/dts/rk3588s-orangepi-5-u-boot.dtsi
ORANGEPI-5-PLUS-RK3588
M: Jonas Karlman <jonas@kwiboo.se>
S: Maintained
F: configs/orangepi-5-plus-rk3588_defconfig
F: arch/arm/dts/rk3588-orangepi-5-plus.dts
F: arch/arm/dts/rk3588-orangepi-5-plus-u-boot.dtsi

105
configs/orangepi-5-plus-rk3588_defconfig Normal file
View File

@ -0,0 +1,105 @@
CONFIG_ARM=y
CONFIG_SKIP_LOWLEVEL_INIT=y
CONFIG_SYS_HAS_NONCACHED_MEMORY=y
CONFIG_COUNTER_FREQUENCY=24000000
CONFIG_ARCH_ROCKCHIP=y
CONFIG_TEXT_BASE=0x00a00000
CONFIG_SPL_LIBCOMMON_SUPPORT=y
CONFIG_SPL_LIBGENERIC_SUPPORT=y
CONFIG_NR_DRAM_BANKS=2
CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0xc00000
CONFIG_SF_DEFAULT_SPEED=24000000
CONFIG_SF_DEFAULT_MODE=0x2000
CONFIG_DEFAULT_DEVICE_TREE="rk3588-orangepi-5-plus"
CONFIG_ROCKCHIP_RK3588=y
CONFIG_SPL_ROCKCHIP_COMMON_BOARD=y
CONFIG_SPL_SERIAL=y
CONFIG_SPL_STACK_R_ADDR=0x600000
CONFIG_TARGET_EVB_RK3588=y
CONFIG_SPL_STACK=0x400000
CONFIG_DEBUG_UART_BASE=0xFEB50000
CONFIG_DEBUG_UART_CLOCK=24000000
CONFIG_SPL_SPI_FLASH_SUPPORT=y
CONFIG_SPL_SPI=y
CONFIG_SYS_LOAD_ADDR=0xc00800
CONFIG_PCI=y
CONFIG_DEBUG_UART=y
CONFIG_AHCI=y
CONFIG_FIT=y
CONFIG_FIT_VERBOSE=y
CONFIG_SPL_FIT_SIGNATURE=y
CONFIG_SPL_LOAD_FIT=y
CONFIG_LEGACY_IMAGE_FORMAT=y
CONFIG_OF_BOARD_SETUP=y
CONFIG_DEFAULT_FDT_FILE="rockchip/rk3588-orangepi-5-plus.dtb"
# CONFIG_DISPLAY_CPUINFO is not set
CONFIG_DISPLAY_BOARDINFO_LATE=y
CONFIG_SPL_MAX_SIZE=0x40000
CONFIG_SPL_PAD_TO=0x7f8000
CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
CONFIG_SPL_BSS_START_ADDR=0x4000000
CONFIG_SPL_BSS_MAX_SIZE=0x4000
# CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
# CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
CONFIG_SPL_STACK_R=y
CONFIG_SPL_SPI_LOAD=y
CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
CONFIG_SPL_ATF=y
CONFIG_CMD_GPIO=y
CONFIG_CMD_GPT=y
CONFIG_CMD_I2C=y
CONFIG_CMD_MMC=y
CONFIG_CMD_PCI=y
CONFIG_CMD_USB=y
# CONFIG_CMD_SETEXPR is not set
CONFIG_CMD_REGULATOR=y
# CONFIG_SPL_DOS_PARTITION is not set
CONFIG_SPL_OF_CONTROL=y
CONFIG_OF_LIVE=y
CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
CONFIG_SPL_DM_SEQ_ALIAS=y
CONFIG_SPL_REGMAP=y
CONFIG_SPL_SYSCON=y
CONFIG_AHCI_PCI=y
CONFIG_DWC_AHCI=y
CONFIG_SPL_CLK=y
CONFIG_ROCKCHIP_GPIO=y
CONFIG_SYS_I2C_ROCKCHIP=y
CONFIG_MISC=y
CONFIG_SUPPORT_EMMC_RPMB=y
CONFIG_MMC_DW=y
CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_SDMA=y
CONFIG_MMC_SDHCI_ROCKCHIP=y
CONFIG_SF_DEFAULT_BUS=5
CONFIG_SPI_FLASH_SFDP_SUPPORT=y
CONFIG_SPI_FLASH_XMC=y
CONFIG_PHYLIB=y
CONFIG_RTL8169=y
CONFIG_NVME_PCI=y
CONFIG_PCIE_DW_ROCKCHIP=y
CONFIG_PHY_ROCKCHIP_INNO_USB2=y
CONFIG_PHY_ROCKCHIP_NANENG_COMBOPHY=y
CONFIG_PHY_ROCKCHIP_USBDP=y
CONFIG_SPL_PINCTRL=y
CONFIG_PWM_ROCKCHIP=y
CONFIG_SPL_RAM=y
CONFIG_SCSI=y
CONFIG_DM_SCSI=y
CONFIG_BAUDRATE=1500000
CONFIG_DEBUG_UART_SHIFT=2
CONFIG_SYS_NS16550_MEM32=y
CONFIG_ROCKCHIP_SFC=y
CONFIG_SYSRESET=y
CONFIG_USB=y
CONFIG_DM_USB_GADGET=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_GENERIC=y
CONFIG_USB_OHCI_HCD=y
CONFIG_USB_OHCI_GENERIC=y
CONFIG_USB_DWC3=y
CONFIG_USB_DWC3_GENERIC=y
CONFIG_ERRNO_STR=y

1
doc/board/rockchip/rockchip.rst
View File

@ -119,6 +119,7 @@ List of mainline supported Rockchip boards:
- Radxa ROCK 5A (rock5a-rk3588s)
- Radxa ROCK 5B (rock5b-rk3588)
- Xunlong Orange Pi 5 (orangepi-5-rk3588s)
- Xunlong Orange Pi 5 Plus (orangepi-5-plus-rk3588)
* rv1108
- Rockchip Evb-rv1108 (evb-rv1108)