rockchip: rk3308-evb: Update defconfig

Update defconfig for rk3308-evb with new defaults.

Add OF_LIBFDT_OVERLAY=y to support device tree overlays.

Remove the SPL_DRIVERS_MISC=y option, no misc driver is used in SPL.

Use DEBUG_UART_BASE=0xFF0E0000 and disable DEBUG_UART_BOARD_INIT to
make debug uart use uart4, same as stdout-path prop.

Remove BOOTDELAY=0, SYS_CONSOLE_INFO_QUIET=y and enable more CMD to
allow use of U-Boot cmdline.

Add DM_ETH_PHY=y and PHY_REALTEK=y to support onboard ethernet PHY.

Add PHY_ROCKCHIP_INNO_USB2=y, DM_USB_GADGET=y and remove USB_DWC2=y to
allow full use of USB 2.0 host and otg ports.

Enable EFI_LOADER to allow EFI boot.

Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>

configs/evb-rk3308_defconfig

@@ -3,41 +3,32 @@ CONFIG_SKIP_LOWLEVEL_INIT=y
 CONFIG_COUNTER_FREQUENCY=24000000
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_DEFAULT_DEVICE_TREE="rk3308-evb"
+CONFIG_OF_LIBFDT_OVERLAY=y
 CONFIG_DM_RESET=y
 CONFIG_ROCKCHIP_RK3308=y
-CONFIG_SPL_DRIVERS_MISC=y
 CONFIG_TARGET_EVB_RK3308=y
-CONFIG_DEBUG_UART_BASE=0xFF0C0000
+CONFIG_DEBUG_UART_BASE=0xFF0E0000
 CONFIG_DEBUG_UART_CLOCK=24000000
+# CONFIG_DEBUG_UART_BOARD_INIT is not set
 CONFIG_SYS_LOAD_ADDR=0xc00800
 CONFIG_DEBUG_UART=y
 CONFIG_ANDROID_BOOT_IMAGE=y
 CONFIG_FIT=y
 CONFIG_FIT_VERBOSE=y
-CONFIG_BOOTDELAY=0
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3308-evb.dtb"
-CONFIG_SYS_CONSOLE_INFO_QUIET=y
 # CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_SPL_MAX_SIZE=0x20000
+CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x7f8000
 # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
-# CONFIG_CMD_BDI is not set
+CONFIG_CMD_GPIO=y
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_ELF is not set
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_XIMG is not set
 CONFIG_CMD_GPT=y
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
+CONFIG_CMD_ROCKUSB=y
 CONFIG_CMD_USB_MASS_STORAGE=y
-# CONFIG_CMD_ITEST is not set
+CONFIG_CMD_RNG=y
-# CONFIG_CMD_SETEXPR is not set
+CONFIG_CMD_KASLRSEED=y
-# CONFIG_CMD_SLEEP is not set
+CONFIG_CMD_REGULATOR=y
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_ISO_PARTITION is not set
-CONFIG_EFI_PARTITION_ENTRIES_NUMBERS=64
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_OF_LIVE=y
 CONFIG_OF_SPL_REMOVE_PROPS="clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents"
@@ -51,9 +42,11 @@ CONFIG_SYS_I2C_ROCKCHIP=y
 CONFIG_SUPPORT_EMMC_RPMB=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_ROCKCHIP=y
+CONFIG_PHY_REALTEK=y
+CONFIG_DM_ETH_PHY=y
 CONFIG_ETH_DESIGNWARE=y
 CONFIG_GMAC_ROCKCHIP=y
-CONFIG_PHY=y
+CONFIG_PHY_ROCKCHIP_INNO_USB2=y
 CONFIG_PINCTRL=y
 CONFIG_REGULATOR_PWM=y
 CONFIG_DM_REGULATOR_FIXED=y
@@ -62,15 +55,15 @@ CONFIG_RAM=y
 CONFIG_BAUDRATE=1500000
 CONFIG_DEBUG_UART_SHIFT=2
 CONFIG_SYS_NS16550_MEM32=y
+CONFIG_SYSINFO=y
 CONFIG_SYSRESET=y
 CONFIG_USB=y
+CONFIG_DM_USB_GADGET=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_GENERIC=y
-CONFIG_USB_DWC2=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DWC2_OTG=y
 CONFIG_USB_GADGET_DOWNLOAD=y
-CONFIG_SPL_TINY_MEMSET=y
+CONFIG_USB_FUNCTION_ROCKUSB=y
 CONFIG_LZO=y
 CONFIG_ERRNO_STR=y
-# CONFIG_EFI_LOADER is not set