random-mirrors/smaeul-u-boot
1
0
Fork 0
mirror of https://github.com/smaeul/u-boot.git synced 2025-10-14 04:46:01 +01:00
Code Issues Packages Projects Releases Wiki Activity

arm64: zynqmp: Switch to ethernet-phy-id in kv260

Browse Source 
Use ethernet-phy-id compatible string to properly describe phy reset on
kv260 boards. Previous description wasn't correct because reset was done
for mdio bus to operate and it was in this case used for different purpose
which was eth phy reset. With ethernet-phy-id phy reset happens only for
the phy via phy framework.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/73b64f1a2b873b4e26bd2b365364bdf313794ae2.1645629459.git.michal.simek@xilinx.com
This commit is contained in:
Michal Simek 2022-02-23 16:17:40 +01:00
parent a3efa53c01
commit ff79448294
2 changed files with 8 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
arch/arm/dts/zynqmp-sck-kv-g-revA.dts
View File

@ -168,16 +168,18 @@
mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
reset-delay-us = <2>;
phy0: ethernet-phy@1 {
#phy-cells = <1>;
reg = <1>;
compatible = "ethernet-phy-id2000.a231";
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,dp83867-rxctrl-strap-quirk;
reset-assert-us = <100>;
reset-deassert-us = <280>;
reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
};
};
};

6
arch/arm/dts/zynqmp-sck-kv-g-revB.dts
View File

@ -155,16 +155,18 @@
mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
reset-delay-us = <2>;
phy0: ethernet-phy@1 {
#phy-cells = <1>;
reg = <1>;
compatible = "ethernet-phy-id2000.a231";
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
ti,dp83867-rxctrl-strap-quirk;
reset-assert-us = <100>;
reset-deassert-us = <280>;
reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
};
};
};