Billy Tsai
be298254be
ARM: dts: ast2500: Add SGPIO to device tree
...
Add SGPIO DTS node and enable it for AST2500 EVB.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
2024-10-29 12:12:04 -06:00
Simon Glass
8c103c33fb
dm: dts: Convert driver model tags to use new schema
...
Now that Linux has accepted these tags, move the device tree files in
U-Boot over to use them.
Signed-off-by: Simon Glass <sjg@chromium.org>
2023-02-14 09:43:26 -07:00
Chin-Ting Kuo
d37b4f37ea
arm: dts: aspeed: Update SPI flash node settings
...
For both AST2500 and AST2600, there are three
SPI controllers, FMC(Firmware Memory Controller),
SPI1 and SPI2. The clock source is HCLK. Following
is the basic information for ASPEED SPI controller.
AST2500:
- FMC:
CS number: 3
controller reg: 0x1e620000 - 0x1e62ffff
decoded address: 0x20000000 - 0x2fffffff
- SPI1:
CS number: 2
controller reg: 0x1e630000 - 0x1e630fff
decoded address: 0x30000000 - 0x37ffffff
- SPI2:
CS number: 2
controller reg: 0x1e631000 - 0x1e631fff
decoded address: 0x38000000 - 0x3fffffff
AST2600:
- FMC:
CS number: 3
controller reg: 0x1e620000 - 0x1e62ffff
decoded address: 0x20000000 - 0x2fffffff
- SPI1:
CS number: 2
controller reg: 0x1e630000 - 0x1e630fff
decoded address: 0x30000000 - 0x3fffffff
- SPI2:
CS number: 3
controller reg: 0x1e631000 - 0x1e631fff
decoded address: 0x50000000 - 0x5fffffff
Signed-off-by: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
2022-09-13 12:08:40 -04:00
Joel Stanley
0b2a749bc6
ARM: dts: ast2500: Update SDHCI nodes
...
Match the description used by the Linux kernel, except use scu instead
of syscon as the phandle.
Signed-off-by: Joel Stanley <joel@jms.id.au>
2022-07-06 14:31:29 -04:00
Joel Stanley
5ff466fade
ARM: dts: ast2500-evb: Add I2C devices
...
The EVB has an EEPROM on bus 3 and a LM75 temp sensor on bus 7. Enable
those busses we can test the I2C driver.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
2022-07-06 14:30:51 -04:00
Eddie James
30231e0ddb
ARM: dts: ast2500: Add SDHCI nodes
...
Add nodes for the Aspeed SD controllers with their necessary properties.
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Eddie James <eajames@linux.ibm.com>
2019-09-05 15:27:31 +08:00
Cédric Le Goater
f55f565d71
aspeed: Activate ethernet devices on the ast2500 Eval Board
...
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
2018-11-05 10:41:58 -06:00
maxims@google.com
c93adc08f3
aspeed: Device Tree configuration for Reset Driver
...
Add Reset Driver configuration to ast2500 SoC Device Tree and bindings
for various reset signals
Signed-off-by: Maxim Sloyko <maxims@google.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-05-08 11:57:32 -04:00
maxims@google.com
d9b88d2547
aspeed: Support for ast2500 Eval Board
...
ast2500 Eval Board device tree and board specific configuration.
Reviewed-by: Simon Glass <sjg@chromium.org>
2017-01-28 14:04:33 -05:00
