In contrast to some other Allwinner SoCs, there is no difference between
the DTs for the Allwinner A10s/A13 SoCs (sun5i) between the U-Boot and the
Linux kernel repository.
Remove the old copies of the A10s/A13 related .dts and .dtsi files, and
switch most of sun5i boards over to use OF_UPSTREAM.
There are two boards for which we don't have DTs in the kernel tree.
Keep those two .dts files in the legacy U-Boot DT directory, and let
their defconfig opt out of OF_UPSTREAM.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
In contrast to some other Allwinner SoCs, there is no difference between
the DTs for the Allwinner A10 SoCs (sun4i) between the U-Boot and the
Linux kernel repository.
Remove the old copies of the A10 related .dts and .dtsi files, and switch
most of sun4i boards over to use OF_UPSTREAM.
There are two boards for which we don't have DTs in the kernel tree.
Keep those two .dts files in the legacy U-Boot DT directory, and let
their defconfig opt out of OF_UPSTREAM.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Sumit Garg <sumit.garg@linaro.org>
In contrast to some other Allwinner SoCs, there is no difference between
the DTs for the Allwinner F1C100/F1C200 SoCs (sunvi) between the U-Boot
and the Linux kernel repository.
Remove the old copies of the F1Cx00 related .dts and .dtsi files, and
switch the whole suniv SoC over to use OF_UPSTREAM.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
The H616 DRAM controller requires some board specific parameters, which
we declare in Kconfig, let each board specify in their defconfig, and
then use in the DRAM init code.
Other DRAM controllers now require a very similar, if not identical
parameter set, with so far the same parameter names used.
To help keep the Kconfig file at bay, rename the existing parameter
names to drop the H616_ part in there, to make them more naturally
reusable for other SoCs.
No functional change, just a rename.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
This switches all boards with the Allwinner H616/H618/H313/H700 SoCs over to
use OF_UPSTREAM. We are doing it for this SoC family only since the DTs
between the U-Boot and the kernel repo are exactly identical, whereas other
families have one compatibility fix in U-Boot to allow booting older kernels.
Other will follow if this plays out well.
The biggest chunk otherwise is adding support for an Anbernic game console,
using the H700 SoC. For that we need to enhance the DRAM support code, and
pick two DT commits from the mainline kernel/DT rebasing repo, followed
by the defconfig patch.
On top of that two small fixes for the old Allwinner A80.
Gitlab CI passed, and I booted that briefly on some boards, including an
H616 and an H618 one (with LPDDR4).
CSI1 channel (22) is missing and IOMMU (25) has priority flag set in
vendor bootloader. Fix that.
While at it, replace bandwidth flag with priority since original flag has
always value "true".
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
It's safer to start scanning for columns first and then rows. Columns
reside on LSB address pins, which means that second configuration will
already have all needed row pins active.
This is also preparation for introducing DDR4 support, which need scan
for banks and bank groups too.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
When comparing configuration procedure to vendor driver, I noticed that
one command was out of order and that some delays were missing.
Fix that.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
It seems that different dies need different PHY pin mapping. Select
alternatives at compile time.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
[adapted to switch from runtime to compile time config]
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Adjust H616 LPDDR4 DRAM settings to be in line with vendor driver.
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Chris Morgan <macromorgan@hotmail.com>
With the recent "old-style sunxi" sync and the penultimate OF_UPSTREAM DT
update, both directories were based on the same v6.10 kernel tree.
And while there is one subtle difference in many Allwinner SoC's DT
files, the H616 ones turn out to be identical.
Remove the old copies of the H616 related .dts and .dtsi files, and
switch the whole H616 SoC over to use OF_UPSTREAM. This immediately
benefits from the recent upstream DT update, to kernel v6.11.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tim Harvey <tharvey@gateworks.com> says:
Modern eMMC v4+ devices have multiple hardware partitions per the JEDEC
specification described as:
Boot Area Partition 1
Boot Area Partition 2
RPMB Partition
General Purpose Partition 1
General Purpose Partition 2
General Purpose Partition 3
General Purpose Partition 4
User Data Area
These are referenced by fields in the PARTITION_CONFIG register
(Extended CSD Register 179) which is defined as:
bit 7: reserved
bit 6: BOOT_ACK
0x0: No boot acknowledge sent (default
0x1: Boot acknowledge sent during boot operation Bit
bit 5:3: BOOT_PARTITION_ENABLE
0x0: Device not boot enabled (default)
0x1: Boot Area partition 1 enabled for boot
0x2: Boot Area partition 2 enabled for boot
0x3-0x6: Reserved
0x7: User area enabled for boot
bit 2:0 PARTITION_ACCESS
0x0: No access to boot partition (default)
0x1: Boot Area partition 1
0x2: Boot Area partition 2
0x3: Replay Protected Memory Block (RPMB)
0x4: Access to General Purpose partition 1
0x5: Access to General Purpose partition 2
0x6: Access to General Purpose partition 3
0x7: Access to General Purpose partition 4
Note that setting PARTITION_ACCESS to 0x0 results in selecting the User
Data Area partition.
You can see above that the two fields BOOT_PARTITION_ENABLE and
PARTITION_ACCESS do not use the same enumerated values.
U-Boot uses a set of macros to access fields of the PARTITION_CONFIG
register:
EXT_CSD_BOOT_ACK_ENABLE (1 << 6)
EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3)
EXT_CSD_PARTITION_ACCESS_ENABLE (1 << 0)
EXT_CSD_PARTITION_ACCESS_DISABLE (0 << 0)
EXT_CSD_BOOT_ACK(x) (x << 6)
EXT_CSD_BOOT_PART_NUM(x) (x << 3)
EXT_CSD_PARTITION_ACCESS(x) (x << 0)
EXT_CSD_EXTRACT_BOOT_ACK(x) (((x) >> 6) & 0x1)
EXT_CSD_EXTRACT_BOOT_PART(x) (((x) >> 3) & 0x7)
EXT_CSD_EXTRACT_PARTITION_ACCESS(x) ((x) & 0x7)
There are various places in U-Boot where the BOOT_PARTITION_ENABLE field
is accessed via EXT_CSD_EXTRACT_PARTITION_ACCESS and converted to a
hardware partition consistent with the definition of the
PARTITION_ACCESS field used by the various mmc_switch incarnations.
To add some sanity to the distinction between BOOT_PARTITION_ENABLE
(used to specify the active device on power-cycle) and PARTITION_ACCESS
(used to switch between hardware partitions) create two enumerated types
and use them wherever struct mmc * part_config is used or the above
macros are used.
Additionally provide arrays of the field names and allow those to be
used in the 'mmc partconf' command and in board support files.
The first patch adds enumerated types and makes use of them which
represents no compiled code change.
The 2nd patch adds the array of names and uses them in the 'mmc
partconf' command.
The 3rd patch uses the array of hardware partition names in a board
support file to show what emmc hardware partition U-Boot is being loaded
from.
Modern eMMC v4+ devices have multiple hardware partitions per the JEDEC
specification described as:
Boot Area Partition 1
Boot Area Partition 2
RPMB Partition
General Purpose Partition 1
General Purpose Partition 2
General Purpose Partition 3
General Purpose Partition 4
User Data Area
These are referenced by fields in the PARTITION_CONFIG register
(Extended CSD Register 179) which is defined as:
bit 7: reserved
bit 6: BOOT_ACK
0x0: No boot acknowledge sent (default
0x1: Boot acknowledge sent during boot operation Bit
bit 5:3: BOOT_PARTITION_ENABLE
0x0: Device not boot enabled (default)
0x1: Boot Area partition 1 enabled for boot
0x2: Boot Area partition 2 enabled for boot
0x3-0x6: Reserved
0x7: User area enabled for boot
bit 2:0 PARTITION_ACCESS
0x0: No access to boot partition (default)
0x1: Boot Area partition 1
0x2: Boot Area partition 2
0x3: Replay Protected Memory Block (RPMB)
0x4: Access to General Purpose partition 1
0x5: Access to General Purpose partition 2
0x6: Access to General Purpose partition 3
0x7: Access to General Purpose partition 4
Note that setting PARTITION_ACCESS to 0x0 results in selecting the User
Data Area partition.
You can see above that the two fields BOOT_PARTITION_ENABLE and
PARTITION_ACCESS do not use the same enumerated values.
U-Boot uses a set of macros to access fields of the PARTITION_CONFIG
register:
There are various places in U-Boot where the BOOT_PARTITION_ENABLE field
is accessed via EXT_CSD_EXTRACT_PARTITION_ACCESS and converted to a
hardware partition consistent with the definition of the
PARTITION_ACCESS field which is also the value used to specify the
hardware partition of the various mmc_switch incarnations.
To add some sanity to the distinction between BOOT_PARTITION_ENABLE
(used to specify the active device on power-cycle) and PARTITION_ACCESS
(used to switch between hardware partitions) create two enumerated types
and use them wherever struct mmc * part_config is used or the above
macros are used.
This represents no code changes.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Rather than having every caller set this up individually, create a
common init function. This allows new fields to be added without the
risk of them being left uninited.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Nothing really major here, some rework of the SPL PMIC drivers, adding
support for the AXP717 on the way, which is showing up on newer boards
now, most prominently some Anbernic handheld gaming devices. The rest
is enabling Ethernet and SPI boot on the Allwinner V3s SoC, plus two
fixes. This also updates the "traditional U-Boot" DTs to that of kernel
v6.9. I will look into upgrading some SoCs to dts/upstream in the
coming cycle, though this will not cover all SoCs for now, as we carry
some non-mainline fix to improve compatibility with older kernels. Will
see how it goes, but for now we stick with the "old way".
The branch survived the gitlab CI run, and Linux boot testing on some
selected boards.
The BootROM in the Allwinner H616 tries to load the initial boot code
from sector 16 (8KB) of an SD card or eMMC device, but also looks at
sector 512 (256KB). This helps with GPT formatted cards.
A "high" boot offset is also used on previous SoCs, but it's sector 256
(128KB) there instead.
Extend the existing offset calculation code to consider the different
sector offset when running on an H616 SoC. This allows to load U-Boot
on any H616 device when the SPL is not located at 8KB.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Ryan Walklin <ryan@testtoast.com>
The V3s is identical regarding register layout, clocks and resets to
the sun6i variants. Therefore, we can just add the MACH_SUN8I_V3S to
the sun6i compatible ones.
SPI boot was tested on a custom board with a Gigadevice GD25Q64 8MiB
SPI flash.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
On boards using the AXP717 PMIC, the DRAM rail is often not setup
correctly at reset time, so we have to program the PMIC very early in
the SPL, before running the DRAM initialisation.
Using the new generic AXP SPL driver, add the Kconfig options and
platform bits needed to support an AXP717 PMIC chip in I2C mode.
This allows to set up the correct voltage for the DRAM chips and the
CPU cores.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Ryan Walklin <ryan@testtoast.com>
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove <common.h> from all mach-sunxi and board/sunxi files and when
needed add missing include files directly.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
In clock_sun9i.c, responsible for (mostly early) clock setup on the
Allwinner A80 SoC, many functions are only needed by the SPL, and are
thus already guarded by CONFIG_SPL_BUILD.
Over the years drivers like for the UART or I2C were converted to DM, and
they care about clock setup themselves now, by using a proper DM clock
driver.
This means those devices need the clock setup functions here for the SPL
only. Move some functions around, to group all SPL-only function within
one #ifdef guard. Some functions were exported, but never used outside
of this file, so remove their prototypes from the header file and mark
them as static.
This avoids unnecessary code in U-Boot proper and helps further
refactoring. Add some comments on the way to help understanding of the
file.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
In clock_sun8i_a83t.c, responsible for (mostly early) clock setup on the
Allwinner A83T SoC, many functions are only needed by the SPL, and are
thus already guarded by CONFIG_SPL_BUILD.
Over the years drivers like for the UART or I2C were converted to DM,
so they care about clock setup themselves now, by using a proper DM clock
driver.
This means those devices need the clock setup functions here for the SPL
only. Include those functions into the existing CONFIG_SPL_BUILD guards,
so they are compiled for the SPL only.
This avoids unnecessary code in U-Boot proper and helps further
refactoring. Add some comments on the way to help understanding of the
file.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
In clock_sun50i_h6.c, responsible for (mostly early) clock setup on
newer generation Allwinner SoCs, many functions are only needed by the
SPL, and are thus already guarded by CONFIG_SPL_BUILD.
Over the years drivers like for the UART or I2C were converted to DM,
so they care about clock setup themselves now, by using a proper DM clock
driver.
This means those devices need the clock setup functions here for the SPL
only. Include those functions into the existing CONFIG_SPL_BUILD guards,
so they are compiled for the SPL only. By moving the clock_get_pll6()
function to the end of the file, all SPL-only clocks can be contained
within one #ifdef guard.
This avoids unnecessary code in U-Boot proper and helps further
refactoring. Add some comments on the way to help understanding of the
file.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
In clock_sun6i.c, responsible for (mostly early) clock setup on older
generation Allwinner SoCs, many functions are only needed by the SPL,
and are thus already guarded by CONFIG_SPL_BUILD.
Over the years drivers like for the UART or I2C were converted to DM,
so they care about clock setup themselves now, by using a proper DM clock
driver.
This means those devices need the clock setup functions here for the SPL
only. Include those functions into the existing CONFIG_SPL_BUILD guards,
so they are compiled for the SPL only.
This avoids unnecessary code in U-Boot proper and helps further
refactoring. Add some comments on the way to help understanding of the
file.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
In clock_sun4i.c, responsible for (mostly early) clock setup on early
generation Allwinner SoCs, many functions are only needed by the SPL,
and are thus already guarded by CONFIG_SPL_BUILD.
Over the years drivers like for the UART or I2C were converted to DM,
so they care about clock setup themselves now, by using a proper DM clock
driver.
This means those devices need the clock setup functions here for the SPL
only. Include those functions into the existing CONFIG_SPL_BUILD guards,
so they are compiled for the SPL only.
This avoids unnecessary code in U-Boot proper and helps further
refactoring. Add some comments on the way to help understanding of the
file.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
With the clock_twi_onoff() function now being called only from the SPL,
the whole clock.c file in arch/arm/mach-sunxi is needed by SPL code
only.
Remove the redundant #ifdef from the clock_init() function, actually
this function was already only called from the SPL.
Then adjust the Makefile to compile clock.c only with CONFIG_SPL_BUILD
defined.
This avoids unnecessary code in U-Boot proper and allows further
refactoring and code-split between the SPL and U-Boot proper.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Some later 32-bit SoCs require some setup of the Secure Peripherals
Controller, which is handled in tzpc_init().
At the moment this is guarded in board.c by some #ifdefs selecting the
SoCs that need it.
Move those #ifdef guards into the header file, providing an empty stub
function for all other SoCs, so that the #ifdefs can be removed from the
.c file, to improve readability.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
R528/T113 SoCs uses the same SPI IP as the H6, also have the same clocks
and reset bits layout, but the CCU base is different. Another difference
is that the new SoCs do not have a clock divider inside. Instead of this
we should configure sample mode depending on input clock rate.
The pin assignment is also different: the H6 uses PC0, the R528/T113 PC4
instead. This makes for a change in spi0_pinmux_setup() routine.
This patch extends the H6/H616 #ifdef guards to also cover the R528/T113,
using the shared CONFIG_SUNXI_GEN_NCAT2 and CONFIG_MACH_SUN8I_R528
symbols. Also use CONFIG_SUNXI_GEN_NCAT2 symbol for the Kconfig
dependency.
Signed-off-by: Maksim Kiselev <bigunclemax@gmail.com>
Tested-by: Sam Edwards <CFSworks@gmail.com>
Current sunxi DRAM initialisation code does several test accesses to the
DRAM array to detect aliasing effects and so determine the correct
row/column configuration. This changes the DRAM content, which breaks
use cases like soft reset and Linux's ramoops mechanism.
Fix this problem by saving and restoring the content of the DRAM cells
that is used for the test writes.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
mctl_mem_matches and mctl_mem_matches_base identical functions. To
avoid code duplication move them to dram_helpers and make
mctl_mem_matches use generic mctl_mem_matches_base.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
This delay is required after switching the clock source.
See “A20 Reference manual v1.4” Page 50 / section
“1.5.4.16. CPU/AHB/APB0 CLOCK RATIO”: “If the clock
source is changed, at most to wait for 8 present running
clock cycles.”
This is already implemented in clock_set_pll1(), but was
still missing in clock_init_safe().
Signed-off-by: Ludwig Kormann <ludwig.kormann@ict42.de>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
This is easier to read than the #ifdef staircase, provides better
visibility into the memory map (alongside the other Kconfig
definitions), and allows these addresses to be reused from code.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
At the moment every Allwinner board builds and requires an SPL, even
though we select this individually in each _defconfig file.
For experiments and for early bringup of new SoCs it would be beneficial
to only build U-Boot proper, for instance to postpone a tedious SPL port
(including DRAM support) in the initial phase.
Protect some SPL related symbols that we unconditionally select at the
moment with "if SPL", to avoid Kconfig conflicts when CONFIG_SPL is
disabled.
This alone does not cleanly build U-Boot proper only yet, but gets it
far enough so that the binary can be harvested.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
The usage of the common.h include file is deprecated, and has already
been removed from several files.
Get rid of all inclusions in the arch/arm/mach-sunxi directory. Most
files actually don't need the header at all, for the few others just
include the headers that we actually require.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
In general terms, we -include include/linux/kconfig.h and so normal
U-Boot code does not need to also #include it. However, for code which
is shared with userspace we may need to add it so that either our full
config is available or so that macros such as CONFIG_IS_ENABLED() can be
evaluated. In this case make sure that we guard these includes with a
test for USE_HOSTCC so that it clear as to why we're doing this.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Aligning addresses and sizes causes overhead which is unnecessary when we
are not loading from block devices. Remove bl_len when it is not needed.
For example, on iot2050 we save 144 bytes with this patch (once the rest of
this series is applied):
add/remove: 0/0 grow/shrink: 0/3 up/down: 0/-144 (-144)
Function old new delta
spl_load_simple_fit 920 904 -16
load_simple_fit 496 444 -52
spl_spi_load_image 384 308 -76
Total: Before=87431, After=87287, chg -0.16%
We use panic() instead of BUILD_BUG_ON in spl_set_bl_len because we still
need to be able to compile it for things like mmc_load_image_raw_sector,
even if that function will not be used.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
For filesystems, filename serves the same purpose as priv. However,
spl_load_fit_image also uses it to determine whether to use a DMA-aligned
buffer. This is beneficial for FAT, which uses a bounce-buffer if the
destination is not DMA-aligned. However, this is unnecessary now that
filesystems set bl_len to ARCH_DMA_MINALIGN instead. With this done, we can
remove filename entirely.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Remove NULL assignments to fields in spl_load_info when .load doesn't
reference these fields. This can result in more efficient code. filename
must stay even if it is unused, since load_simple_fit uses it.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The H616 SoC family has support for several types of DRAM: DDR3,
LPDDR3, DDR4 and LPDDR4.
At the moment, the driver only supports DDR3 and LPDDR3 memory.
Let's extend the driver to support the LPDDR4 memory. This type
of memory widely used in device with T507(-H) SoC and new orangepi
zero3 with H618.
The compatibility with T507 is not yet complete, because there
is difference in the phy_init array.
The LPDDR4-2133 timings correspond to DRAM Rayson RS1G32LO4D2BDS-53BT
found on the NOR SPI from the Orangepi Zero 3 4GB.
Signed-off-by: Mikhail Kalashnikov <iuncuim@gmail.com>
Tested-by: Piotr Oniszczuk <piotr.oniszczuk@gmail.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Acked-by: Andre Przywara <andre.przywara@arm.com>
The original H616 DDR3 ODT configuration code wrote board specific values
into a sequence of paired registers.
For LPDDR3 support we needed to special-case one group of registers,
because for that DRAM type we need to write 0 into the lower register of
each pair. That already made the code less readable.
LPDDR4 support will make things even messier, so let's refactor that
code now: We allow to write different values into the lower and upper
half of each pair. The masking is moved into a macro, and use in each
write statement.
The effect is not as obvious yet, as we don't need the full flexibility at
the moment, but the motivation will become clearer with LPDDR4 support.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Mikhail Kalashnikov <iuncuim@gmail.com>
On boards using the AXP313 PMIC, the DRAM rail is often not setup
correctly at reset time, so we have to program the PMIC very early in
the SPL, before running the DRAM initialisation.
Add a simple AXP313 PMIC driver that knows about DCDC2(CPU) and
DCDC3(DRAM), so that we can bump up the voltage before the DRAM init.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Similar change was done by commit b4c2c151b14b ("Kconfig: Remove all
default n/no options") and again sync is required.
default n/no doesn't need to be specified. It is default option anyway.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com> # tegra
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Angelo Dureghello <angelo@kernel-space.org>
This patch adds the necessary code to make nonsec booting and PSCI
secondary core management functional on the R528/T113.
Signed-off-by: Sam Edwards <CFSworks@gmail.com>
Tested-by: Maksim Kiselev <bigunclemax@gmail.com>
Tested-by: Kevin Amadiva <kevin.amadiva@mec.at>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
At the moment we have each SoC's memory map defined in its own cpu.h,
which is included in include/configs/sunxi_common.h. This will be a
problem with the introduction of Allwinner RISC-V support.
Remove the inclusion of that header file from the common config header,
instead move the required serial base addresses (for the SPL) into a
separate header file. Then include the original cpu.h file only where
we really need it, which is only under arch/arm now.
This disentangles the architecture specific header files from the
generic code.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
