Beagle Play has a different boot flow than the AM62x SK EVM.
AM62x SK EVM:
1. Boot rom reads UDA (User Data Area), looking for tiboot3
2. Boot rom finds tiboot3 and loads it
Beagle Play:
1. Boot rom looks for tiboot3 in mmc0boot0
2. Boot rom finds tiboot3 and loads it
Because of this difference, we need to have a different
partitioning table than the generic TI one.
Include generic TI android support and override the partitioning table
to boot Android.
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
The Kernel Image and DTB files are supposed to be picked from the rootfs
of the SD Card, this fails in legacy boot flow because bootpart is set
to 1:1. Fix it.
Fixes: a200f428b5b21 ("board: ti: am62x: Add am62x_beagleplay_* defconfigs and env file")
Reviewed-by: Nishanth Menon <nm@ti.com>
Acked-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
DFU mode on a beagleplay can be used via the Type-C connector by holding
the USR switch while powering on.
Configuration is already provided as fragments for both the A53 and R5
u-boot parts. Include the am62x_a53_usbdfu.config config. The
am62x_r5_usbdfu.config fragment needs to be added should DFU boot be
required as this will disable booting from persistent storage due to
binary size constraints.
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Nishanth Menon <nm@ti.com> says:
Hi,
Rev 2 of the series.
This is a follow up from [1] - Without the 32k crystal configuration,
wlan doesn't work. Debounce is needed for HDMI Hot plug detect(hpd)
gpio interrupt not storming.
At least the 32k configuration has been done for toradex and phytec
boards, follow similar model of programming.
Series is now based off master branch.
Bootlog: https://gist.github.com/nmenon/75df38bee907785d1d78d1ec4abd7304
Changes from V2:
- Removed depedency on [2] - depending on which way
the merge sequence goes, one of the series will need a rebase.
- Added a patch for a bug that Jan noticed
- Fixup for the fat finger missing 0x in 0x4080 :(
[1] https://lore.kernel.org/u-boot/20230725185253.2123433-4-nm@ti.com/
[2] https://lore.kernel.org/u-boot/20240212194726.1093771-1-nm@ti.com/
We had enabled USB and network pxe boot with the hope to get it all
merged on time. However, it has not panned out. Drop usb and pxe boot
else bootflow scan -l throws in:
a) Unknown uclass 'usb' in label
b) Crashes when attempting pxe - cpsw/mdio driver apparently has missing
error handling of what ever form. This is the one that Jan noticed in
his log.
We can enable these on a later date once things are working.
Cc: Roger Quadros <rogerq@kernel.org>
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Closes: https://lore.kernel.org/all/782ea2c0-eef5-478d-a122-cc6e2d066762@siemens.com/
Signed-off-by: Nishanth Menon <nm@ti.com>
Stop using the findfdt script and switch to setting the fdtfile from C
code.
Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
Move beagleplay support away from ti/am62x to it's own beagle vendor
folder.
This forms the starting point for new beagle platforms added under it's
own board vendor folder.
As part of this create all the associated files with a bare minimum
beagleplay.c file.
Suggested-by: Andrew Davis <afd@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
[trini: Update k3-binman.dtsi to use full path to scheme.yaml now]
Signed-off-by: Tom Rini <trini@konsulko.com>
