This config is causing conflicts with how fdtfile variable is
initialized.
For K3 devices, CONFIG_DEFAULT_DEVICE_TREE= "ti/k3-<board>.dtb".
With CONFIG_TI_FDT_FOLDER_PATH also prefixing "ti", fdtfile is then
"ti/ti/k3-<board>.dtb". This variable is updated when fitImage is
booted and fails to boot due to the parsing error "ti/ti/".
Given that there are no other users of this config other than K3 for
now, it is being removed.
Since am64x, j721e and j721s2 also define a DEFAULT_FDT_FILE, update
them to conform to the DEFAULT_DEVICE_TREE standard.
Signed-off-by: Aashvij Shenai <a-shenai@ti.com>
As there are few redundant functions in board/ti/*/evm.c files, pull
them to a common location of access to reuse and include the common file
to access the functions.
Call k3-ddrss driver through fixup_ddr_driver_for_ecc() to fixup the
device tree and resize the available amount of DDR, if ECC is enabled.
Otherwise, fixup the device tree using the regular
fdt_fixup_memory_banks().
Also call dram_init_banksize() after every call to
fixup_ddr_driver_for_ecc() is made so that gd->bd is populated
correctly.
Ensure that fixup_ddr_driver_for_ecc() is agnostic to the number of DDR
controllers present.
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Define the firmware components updatable via EFI capsule update, including
defining capsule GUIDs for the various firmware components for the AM64x
SK.
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
We now can provide a map and have the standard fdtfile variable set from
code itself. This allows for bootstd to "just work".
While at this, replace findfdt in environment with a warning as it is no
longer needed.
Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
The TMDS64EVM [1] ships with AM64X SR2.0 HS-FS chip
and a slightly different board name in the board information
EEPROM header. Support this board.
[1] https://www.ti.com/tool/TMDS64EVM
Gets rid of below message at boot
"Unidentified board claims AM64-EVM in eeprom header"
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
AM64-HSEVM is AM64-GPEVM with High Security Device.
Gets rid of "Unidentified board claims AM64-HSEVM in eeprom header".
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Acked-by: Andrew Davis <afd@ti.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Tested-by: Nishanth Menon <nm@ti.com> #SK-AM64B
The AM64x SR2.0 SK board uses "AM64B-SKEVM" as the EEPROM identifier.
This board is similar to the AM64x SKEVM except that it has a new
PMIC that will be enabled in the future and consequently could use a
different device tree file in the future.
For now we treat the board same as an AM64x SK.
Signed-off-by: Judith Mendez <jm@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Call into k3-ddrss driver to fixup device tree and resize the available
amount of DDR if ECC is enabled.
A second fixup is required from A53 SPL to take the fixup as done from
R5 SPL and apply it to DT passed to A53 U-boot, which in turn passes
this to the OS.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Use the appropriate fdtdec_setup_mem_size_base and
fdtdec_setup_bank_size calls in dram_init and dram_bank_init to pull
these values from DT, where they are already available, instead of
hardcoding them.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Call dram_init_banksize() from spl_board_init() otherwise TFTP download
fails due to lmb_get_free_size() not able to find unreserved region due
to lack of DRAM size info. Required to support Ethernet boot on AM64x.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Fix the dr_mode in the U-Boot device tree blob, by reading the mode field
from the USB Boot Configuration fields. The dr_mode will only be fixed when
booting from USB.
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
It is a pain to have to specify the value 16 in each call. Add a new
hextoul() function and update the code to use it.
Add a proper comment to simple_strtoul() while we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
Parse MAC addresses from EEPROM and set them in the env. This is needed
to get MAC address for additional ethernet ports on the EVM.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
I2C EEPROM data contains the board name and its revision.
Add support for:
- Reading EEPROM data and store a copy at end of SRAM
- Updating env variable with relevant board info
- Printing board info during boot.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
