Enable this so that the tests run.
Fix a few warnings in the code so that CI passes.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Yasuharu Shibata <yasuharu.shibata@gmail.com>
CONFIG_LED_BLINK and CONFIG_LED_SW_BLINK can be defined independently.
Led blinking works if any (or both) of them is enabled. Unfortunately
the led command help does not display blinking option if only
CONFIG_LED_SW_BLINK is enabled. This is definitely wrong.
This patch fix an issue.
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Alexander Dahl <ada@thorsis.com>
Now that this is always 0, remove it and the associated dead code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Drop two generations of old code in this command. All boards should use
driver model for I2C from 2021.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
This option is very old and the migration deadline was years ago. Drop
it so that the I2C system can be simplified.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Add a 'upl' command to work with Universal Payload features. For now it
only supports reading and writing a handoff structure.
Signed-off-by: Simon Glass <sjg@chromium.org>
Introduce ubi_volume_offset_write() helper, which
allow to write to ubi volume with specified offset.
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Now user can pass an additional parameter 'offset'
to ubi_volume_read() function.
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Acked-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Add a new subcommand 'release' to bring up a core to run baremetal
and RTOS applications.
For example on i.MX8M Plus EVK, release the LAST core to run a RTOS
application, passing the sequence number of the CPU core to release,
here it is 3:
u-boot=> cpu list
0: cpu@0 NXP i.MX8MP Rev1.1 A53 at 1200 MHz at 31C
1: cpu@1 NXP i.MX8MP Rev1.1 A53 at 1200 MHz at 30C
2: cpu@2 NXP i.MX8MP Rev1.1 A53 at 1200 MHz at 31C
3: cpu@3 NXP i.MX8MP Rev1.1 A53 at 1200 MHz at 31C
u-boot=> load mmc 1:2 c0000000 /hello_world.bin
66008 bytes read in 5 ms (12.6 MiB/s)
u-boot=> dcache flush; icache flush
u-boot=> cpu release 3 c0000000
Released CPU core (mpidr: 0x3) to address 0xc0000000
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> says:
v2 changes:
* Drop sw_blink_state structure, move its necessary fields to
led_uc_plat structure.
* Add cyclic_info pointer to led_uc_plat structure. This
simplify code a lot.
* Remove cyclic function search logic. Not needed anymore.
* Fix blinking period. It was twice large.
* Other cleanups.
v3 changes:
* Adapt code to recent cyclic function changes
* Move software blinking functions to separate file
* Other small changes
v4 changes:
* Refactoring of led_set_period() function
v5 changes
* Fix compilation if CONFIG_LED_BLINK is not defined
v6 changes:
* Enable LEDST_BLINK state unconditionally.
* Function led_set_period() becomes available when CONFIG_LED_BLINK
is disabled. This makes led code simpler.
* Software blinking requires about 100 bytes of data for a led. It's
not a good idea to allocate so much memory for each supported led.
Change the code to allocate blinking data only for required leds.
Changes:
* enable LEDST_BLINK state unconditionally
* function led_set_period() becomes available when CONFIG_LED_BLINK
is disabled. This makes led code simpler.
* fix cmd/led.c to work properly when LEDST_BLINK present, but
CONFIG_LED_BLINK is disabled
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Simon Glass <sjg@chromium.org>
All Kconfig options that depend on CONFIG_CMD_DHCP6 should immediately
follow it.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Enable BOOTM_ELF by default for all configs with LIB_ELF selected.
Use OF_LIBFDT as dependency for CMD_ELF_FDT_SETUP.
Signed-off-by: Maxim Moskalets <maximmosk4@gmail.com>
A valid memory location to stash bootstage information at will be
architecture dependent. Move the existing defaults to the main Kconfig
file for this option and set 0x0 as the default only for sandbox.
Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
The only way to configure the load addresses for both bootimg and
vendor_bootimg is by using the "abootimg" command.
If we want to use the C API, there is no equivalent.
Add set_abootimg_addr() and set_avendor_bootimg_addr() so that we can
specify the load address from C.
This can be useful for implementing an Android bootmethod.
Reviewed-by: Igor Opaniuk <igor.opaniuk@gmail.com>
Reviewed-by: Julien Masson <jmasson@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Guillaume La Roque <glaroque@baylibre.com>
Tested-by: Guillaume La Roque <glaroque@baylibre.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
In some FDTs, there is not enough free memory to add nodes, so this
operation fails.
Signed-off-by: Maxim Moskalets <maximmosk4@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This allows spliting partition list to several lines in environment file
ex:
--------------------
gpt_partition_list=
name=boot1,size=5MiB,start=0x100000;
name=boot2,size=5MiB;
name=rootfs1,size=70MiB;
name=rootfs2,size=70MiB;
name=overlay1,size=20MiB;
name=overlay2,size=20MiB;
name=art,size=4MiB;
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
Some operating systems (e.g. seL4) and embedded applications are ELF
images. It is convenient to use FIT-images to implement trusted boot.
Added "elf" image type for booting using bootm command.
Signed-off-by: Maxim Moskalets <maximmosk4@gmail.com>
Tom Rini <trini@konsulko.com> says:
Prior to this series we had some de-facto required cache functions that
were either unimplemented on some architectures or differently named.
This would lead in some cases to having multiple "weak" functions
available as well. Rework things so that an architecture must provide
these functions and it is up to that architecture if a "weak" default
function makes sense, or not.
It should be up to an architecture to decide how to implement cache
functions, and if they need to use weak functions or not. Allowing the
cache command to be built without cache functionality implemented is
unhelpful. Further, guard the call to noncached_set_region with
CONFIG_SYS_NONCACHED_MEMORY as that's when it's implemented and again is
an architecture specific detail.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
This does not work with sandbox at present. Fix it up to use map_sysmem()
to convert an address to a pointer.
Signed-off-by: Jonathan Liu <net147@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Fix conflict and reformat to 80cols:
Signed-off-by: Simon Glass <sjg@chromium.org>
If 0 is passed to the 'bytes' parameter in the ubi_start_update(),
there is no need to call the ubi_more_update_data(). Otherwise,
there will be a double-free of 'vol->upd_buf'.
Also check that the ubi_start_update() was called before calling
the ubi_more_update_data().
Signed-off-by: Martin Kurbanov <mmkurbanov@salutedevices.com>
Documentation:
Update requirements.txt to use current Python module versions
Add a page describing debugging U-Boot with GDB
FIT: describe data-size as a conditionally mandatory property
Correct link to FIT specification in SPL code.
Correct kaslrseed command long text description
UEFI:
Add unit test checking that don't have kaslr-seed when measuring boot
Deduplicate code for measured boot.
Other:
Print size information in fwu command
-----BEGIN PGP SIGNATURE-----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=7g5n
-----END PGP SIGNATURE-----
Merge tag 'efi-2024-10-rc1' of https://source.denx.de/u-boot/custodians/u-boot-efi into next
Pull request efi-2024-10-rc1
Documentation:
Update requirements.txt to use current Python module versions
Add a page describing debugging U-Boot with GDB
FIT: describe data-size as a conditionally mandatory property
Correct link to FIT specification in SPL code.
Correct kaslrseed command long text description
UEFI:
Add unit test checking that don't have kaslr-seed when measuring boot
Deduplicate code for measured boot.
Other:
Print size information in fwu command
The number of random bytes generated is hard coded as 8.
The command takes no argument.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
It is useful when structure is also used for saving vendor data covered
by CRC32.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tim Harvey <tharvey@gateworks.com> says:
This series will automatically add /chosen/kaslr-seed to the dt if
DM_RNG is enabled
during the boot process.
If RANDOMIZE_BASE is enabled in the Linux kernel instructing it to
randomize the virtual address at which the kernel image is loaded, it
expects entropy to be provided by the bootloader by populating
/chosen/kaslr-seed with a 64-bit value from source of entropy at boot.
If we have DM_RNG enabled populate this value automatically when
fdt_chosen is called. We skip this if ARMV8_SEC_FIRMWARE_SUPPORT
is enabled as its implementation uses a different source of entropy
that is not yet implemented as DM_RNG. We also skip this if
MEASURED_BOOT is enabled as in that case any modifications to the
dt will cause measured boot to fail (although there are many other
places the dt is altered).
As this fdt node is added elsewhere create a library function and
use it to deduplicate code. We will provide a parameter to overwrite
the node if present.
For our automatic injection, we will use the first rng device and
not overwrite if already present with a non-zero value (which may
have been populated by an earlier boot stage). This way if a board
specific ft_board_setup() function wants to customize this behavior
it can call fdt_kaslrseed with a rng device index of its choosing and
set overwrite true.
Note that the kalsrseed command (CMD_KASLRSEED) is likely pointless now
but left in place in case boot scripts exist that rely on this command
existing and returning success. An informational message is printed to
alert users of this command that it is likely no longer needed.
Note that the Kernel's EFI STUB only relies on EFI_RNG_PROTOCOL for
randomization and completely ignores the kaslr-seed for its own
randomness needs (i.e the randomization of the physical placement of
the kernel). It gets weeded out from the DTB that gets handed over via
efi_install_fdt() as it would also mess up the measured boot DTB TPM
measurements as well.
Use the fdt_kaslrseed function to deduplicate code doing the same thing.
Note that the kalsrseed command (CMD_KASLRSEED) is likely pointless now
but left in place in case boot scripts exist that rely on this command
existing and returning success. An informational message is printed to
alert users of this command that it is likely no longer needed.
Note that the Kernel's EFI STUB only relies on EFI_RNG_PROTOCOL for
randomization and completely ignores the kaslr-seed for its own
randomness needs (i.e the randomization of the physical placement of
the kernel). It gets weeded out from the DTB that gets handed over via
efi_install_fdt() as it would also mess up the measured boot DTB TPM
measurements as well.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Cc: Michal Simek <michal.simek@amd.com>
Cc: Andy Yan <andy.yan@rock-chips.com>
Cc: Akash Gajjar <gajjar04akash@gmail.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Simon Glass <sjg@chromium.org>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Devarsh Thakkar <devarsht@ti.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Chris Morgan <macromorgan@hotmail.com>
Acked-by: Michal Simek <michal.simek@amd.com>
There is confusion in this function between the flag and state_mask
parameters, which prevents the boot from actually happening. Correct
this by using state_mask instead of flag for deciding which states to go
through.
This fixes booting of some 32-bit Debian kernels.
Note: Some sort of CI for this is in the works.
Fixes: 228c6722d44 ("x86: zboot: Avoid iteration in do_zboot_states()")
Signed-off-by: Simon Glass <sjg@chromium.org>
In case when either gpt_verify_headers() or gpt_verify_partitions()
fails, the memory allocated for gpt_pte will be freed in those functions
internally, but gpt_pte will still contain non-NULL dangling pointer.
The attempt to free it in those cases in gpt_verify() leads to "use
after free" error, which leads to a "Synchronous abort" exception.
This issue was found by running the next command on the device with
incorrect partition table:
=> gpt verify mmc 0 $partitions
which results to:
No partition list provided - only basic check
"Synchronous Abort" handler, esr 0x96000021, far 0xba247bff
....
Fix the issue by only freeing gpt_pte if none of those functions failed.
Fixes: bbb9ffac6066 ("gpt: command: Extend gpt command to support GPT table verification")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
After adding the U_BOOT_LONGHELP macro some new commands came in still
that were not making use if it. Switch these cases over and in a few
places add missing newlines as well.
Signed-off-by: Tom Rini <trini@konsulko.com>
There are of course not a whole lot of examples in-tree yet, but
before they appear, let's make this API change: Instead of separately
allocating a 'struct cyclic_info', make the users embed such an
instance in their own structure, and make the convention that the
callback simply receives the 'struct cyclic_info *', from which the
clients can get their own data using the container_of() macro.
This has a number of advantages.
First, it means cyclic_register() simply cannot fail, simplifying the
code. The necessary storage will simply be allocated automatically
when the client's own structure is allocated (often via
uclass_priv_auto or similar).
Second, code for which CONFIG_CYCLIC is just an option can more easily
be written without #ifdefs, if we just provide an empty struct
cyclic_info {}. For example, the nested CONFIG_IS_ENABLED()s in
https://lore.kernel.org/u-boot/20240316201416.211480-1-marek.vasut+renesas@mailbox.org/
are mostly due to the existence of the 'struct cyclic_info *' member
being guarded by #ifdef CONFIG_CYCLIC.
And we do probably want to avoid the extra memory overhead of that
member when !CONFIG_CYCLIC. But that is automatic if, instead of a
'struct cyclic_info *', one simply embeds a 'struct cyclic_info',
which will have size 0 when !CONFIG_CYCLIC. Also, the no-op
cyclic_register() function can just unconditionally be called, and the
compiler will see that (1) the callback is referenced, so not emit a
warning for a maybe-unused function and (2) see that it can actually
never be reached, so not emit any code for it.
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Loading and running the ELF image is the responsibility of the
library and should not be associated with the command line interface.
It is also required to run ELF images from FIT with the bootm command
so as not to depend on the command line interface.
Signed-off-by: Maxim Moskalets <maximmosk4@gmail.com>
Allow extraction of zstd-compressed images from FIT using imxtract
command. This is especially useful when one has to load an image via
some interface (e.g. SPI) rather that just to the memory.
Signed-off-by: Dmitry Gerasimov <di.gerasimov@gmail.com>
There's never been a -q or -s argument handled in the command, so let's
remove it. This was highlighted during review[1] but somehow still got
through.
While at it, slightly "reword" in the help text how the len + freq
arguments are defined. Indeed, len and freq work in pair, it is possible
to define none of either, n of both, or n - 1 of freq if there are n
len, in which case the freq that goes with the last len would be the n -
1 (and not the default of 400Hz if neither len nor freq is passed). I
assume this isn't what's expected but leaving it for another patch if
need be to fix what happens in that very odd scenario.
[1] https://lore.kernel.org/u-boot/CAPnjgZ0QWNqVFZfEWHxRcFOA3E3gRAZCYs77nGUXKL0pLp+JLQ@mail.gmail.com/
Fixes: ea58b9a404d4 ("cmd: allow sound command to play multiple sounds")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
UEFI:
* Allow specifying a device-tree in an EFI load option
using the efidebug or eficonfig command.
* Let the EFI boot manager fall back to an OS provided device-tree
if no device-tree is specified.
-----BEGIN PGP SIGNATURE-----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=D5PO
-----END PGP SIGNATURE-----
Merge tag 'efi-next-20240611' of https://source.denx.de/u-boot/custodians/u-boot-efi into next
Pull request efi-next-20240611
UEFI:
* Allow specifying a device-tree in an EFI load option
using the efidebug or eficonfig command.
* Let the EFI boot manager fall back to an OS provided device-tree
if no device-tree is specified.
As we now also store device-tree device-paths in load options rename
struct efi_initrd_dp to efi_lo_dp_prefix.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
We already support creating a load option where the device-path
field contains the concatenation of the binary device-path and
optionally the device path of the initrd which we expose via the
EFI_LOAD_FILE2_PROTOCOL.
Allow to append another device-path pointing to the device-tree
identified by the device-tree GUID.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
We already support creating a load option where the device-path
field contains the concatenation of the binary device-path and
optionally the device path of the initrd which we expose via the
EFI_LOAD_FILE2_PROTOCOL.
Allow to append another device-path pointing to the device-tree
identified by the device-tree GUID.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Allow appending a device-path to a device-path that contains an end node
as separator. We need this feature for creating boot options specifying
kernel, initrd, and dtb.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
