ArmSoM Sige7 is a Rockchip RK3588 based SBC (Single Board Computer) by
ArmSoM.
There are two variants depending on the DRAM size : 8G and 16G.
Specification:
Rockchip Rk3588 SoC
4x ARM Cortex-A76, 4x ARM Cortex-A55
8/16GB memory LPDDR4x
Mali G610MC4 GPU
2x MIPI CSI 2 multiple lanes connector
64GB/128GB on board eMMC
uSD slot
1x USB 2.0 Type-A, 1x USB 3.0 Type-A, 1x USB 3.0 Type-C
1x HDMI 2.1 output
2x 2.5 Gbps Ethernet port
40-pin IO header including UART, SPI and I2C
USB PD over USB Type-C
Size: 92mm x 62mm
Kernel commit:
81c828a67c78 (arm64: dts: rockchip: Add ArmSom Sige7 board)
Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The issue described in https://github.com/psf/requests/pull/6655 has
been assigned as a security issue. While unlikely to be exploited in our
usage, update to the current release to fix it. Furthermore, upstream
has now moved on to v2.23.2 as the release to use which has all of the
issues resolved.
Reported-by: GitHub dependabot
Signed-off-by: Tom Rini <trini@konsulko.com>
Fix a trivial typo in the bootmeth documentation.
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Document the logic of when we do a full resync of the device trees used
by OF_UPSTREAM as well as that cherry-picking is allowed as needed.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
These sections which talk about the different phases of the development
process should be using the subsubheading identifier.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Stderr was missing from the initial description and example.
As I understand the env command documentation the subcommand style is
preferred, though the old format is still fully supported.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Reviewed-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
This adds details that I would have liked to have readily available,
in particular how to activate the network interface before enabling
netconsole, and how to integrate netconsole so you can use the U-Boot
prompt.
Signed-off-by: Fiona Klute <fiona.klute@gmx.de>
Reviewed-by: Tony Dinh <mibodhi@gmail.com>
Use upstream device tree files and bindings. To do so:
- imply (enable) OF_UPSTREAM option for E850-96 target
- point DEFAULT_DEVICE_TREE in E850-96 config to upstream dts
- remove now not needed local dts files, binding docs and headers
- update MAINTAINERS and board/samsung/e850-96/MAINTAINERS
correspondingly
Upstream device tree files for Exynos850 SoC and E850-96 board are
pretty much the same as local (removed) ones, so the conversion is
rather straightforward and painless in this case. The appended dts file
(arch/arm/dts/exynos850-e850-96-u-boot.dtsi) stays unchanged.
The only remaining local dt-bindings doc for E850-96 board is
exynos-pmu.yaml. It wasn't removed as it's quite different from Linux
kernel version. Particularly U-Boot local version of exynos-pmu.yaml
describes "samsung,uart-debug-1" property, which is not present in Linux
kernel binding. Later it might be upstreamed to Linux kernel, and once
it's done the U-Boot exynos-pmu.yaml binding can be removed.
No functional change.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
The Indiedroid Nova is a Rockchip RK3588S based SBC from Indiedroid.
Specifications:
Rockchip RK3588S SoC
4x ARM Cortex-A76, 4x ARM Cortex-A55
4/8/16GB memory LPDDR4x
Mali G610MC4 GPU
Optional eMMC
2x USB 2.0, 2x USB 3.0, 1x USB 3.0 C port with DP Alt
1x MIPI-CSI Port (4-lane or 2x 2-lane)
1x MIPI-DSI 4-lane connector
1x Micro HDMI 2.1 output, 1x DP 1.4 output
Gigabit Ethernet
Realtek RTL8821CS WiFi
4 pin debug UART connector
40 pin GPIO header
Size: 85mm x 56mm (Raspberry Pi Form Factor)
Kernel commit:
3900160e164b ("arm64: dts: rockchip: Add Indiedroid Nova board")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The Powkiddy X55 is a Rockchip RK3566 based handheld gaming device.
UART, ADC, eMMC, and SDMMC are tested to work in U-Boot and this
successfully boots mainline Linux.
Kernel commit:
e99adc97e21a ("arm64: dts: rockchip: Add Powkiddy X55")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Sughosh Ganu <sughosh.ganu@linaro.org> says:
The following patch series adds support for version 2 of the FWU
metadata. The version 2 metadata structure is defined in the latest
revision of the FWU specification [1].
The earlier versions of these patches were migrating to a version 2
only support in U-Boot, similar to TF-A. However, based on feedback
from ST [2], this series has been updated to support both versions. A
platform would still be needed to enable one of the two versions of
metadata through a config symbol.
TF-A has code which reads the FWU metadata and boots the platform from
the active partition. TF-A has decided to migrate the FWU code to a
version 2 only support. These changes have been merged in upstream
TF-A.
These changes have been tested on the ST DK2 board, which uses the GPT
based partitioning scheme. Both V1 and V2 metadata versions have been
tested on the DK2 board.
These changes need to be tested on platforms with MTD partitioned
storage devices.
The FWU Update Agent in U-Boot supports both versions of the FWU
metadata. Make changes in the documentation to reflect this.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
The version 2 of the FWU metadata allows for appending opaque vendor
specific data to the metadata structure. Add support for appending
this data to the metadata. The vendor specific data needs to be
provided through a file, passed through a command-line parameter. Make
corresponding changes to the tool's manpage.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Add support for generating the FWU metadata version 2. The tool now
requires the version to be provided as a command-line option. Make
corresponding changes to the tool's manpage.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
For CST to find the certificates and keys for signing, some keys and
certs need to be copied into the u-boot build directory.
Signed-off-by: Claudius Heine <ch@denx.de>
Update documentation and use nxp_imx8mcst binman etype for signing
of flash.bin instead of previous horrible shell scripting.
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Marek Vasut <marex@denx.de>
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
Martyn Welch <martyn.welch@collabora.com> says:
This series adds DFU support for TI AM62 SK and beagleplay boards.
I have picked this series up from Sjoerd due to time constraints.
Since the last revision:
* Removed dwc3 mode setting in favour of reinstating forced peripheral
mode for usb0
* Use of config fragments for both r5 and a53 DFU configuration to
reduce duplication
* Typographical improvements to documentation
We plan to also submit the dts changes to linux so that those can be
dropped again in the near future (hopefully)
Both AM62 SK and beagleplay support DFU boot in a similar way now;
Document how to actually run DFU boot for both boards
Signed-off-by: Sjoerd Simons <sjoerd@collabora.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # on beagle play
Signed-off-by: Martyn Welch <martyn.welch@collabora.com>
Provide a man-page describing the usage of U-Boot on
the Milk-V Mars CM and Milk-V Mars CM Lite boards.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: E Shattow <lucent@gmail.com>
Roger Quadros <rogerq@kernel.org> says:
Sync AM62 device tree files with Linux v6.9 and
add in the missing bits in -u-boot.dtsi to get CPSW
Ethernet working.
CI testing: https://github.com/u-boot/u-boot/pull/534
While we unlikely to have an issue with CVE-2024-22195, it is simple
enough to bump our version of Jinja2 to receive the fix, do so.
Reported-by: GitHub dependabot
Tested-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Remove redundant device tree files now that RK3399 boards have been
migrated to use OF_UPSTREAM.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
If 'env print -e' is invoked without variable name, all UEFI variables are
listed.
Describe that 'env print -e' requires CONFIG_HEXDUMP=y to print content of
UEFI variables.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Add the CoolPi 4 Model B and CoolPi CM5 EVB board to the documentation.
Fixes: 3e15dee38d45 ("board: rockchip: Add support for rk3588 based Cool Pi CM5 EVB")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The driver currently requires the bit clock divider be hardcoded in
devicetree (or use the hardcoded default from apq8016).
The bit clock divider is used to derive the baud rate from the core
clock:
baudrate = clk_rate / csr_div
clk_rate is the actual programmed core clock rate which is returned by
clk_set_rate(), and this UART driver only supports a baudrate of 115200.
We can therefore determine the appropriate value for UARTDM_CSR by
iterating over the possible values and finding the one where the
equation above holds true for a baudrate of 115200.
Implement this logic and drop the non-standard DT bindings for this
driver.
Tested on dragonboard410c.
Tested-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
While I have said this in various release emails, it should be
documented here as well that the next branch opens with the second
release candidate.
Signed-off-by: Tom Rini <trini@konsulko.com>
As reported by Jonas Karlman this series breaks booting on some AArch64
platforms with common use cases. For now the best path forward is to
revert the series.
This reverts commit 777c28460947371ada40868dc994dfe8537d7115, reversing
changes made to ab3453e7b12daef47b9e91da2a2a3d48615dc6fc.
Link: https://lore.kernel.org/u-boot/50dfa3d6-a1ca-4492-a3fc-8d8c56b40b43@kwiboo.se/
Signed-off-by: Tom Rini <trini@konsulko.com>
Currently, fastboot protocol in U-Boot has no opportunity
to execute vendor custom code with verifed boot. This patch
introduce new fastboot subcommand fastboot oem board:<cmd>,
which allow to run custom oem_board function.
Default implementation is __weak. Vendor must redefine it in
board/ folder with his own logic.
For example, some vendors have their custom nand/emmc partition
flashing or erasing. Here some typical command for such use cases:
- flashing:
$ fastboot stage bootloader.img
$ fastboot oem board:write_bootloader
- erasing:
$ fastboot oem board:erase_env
Signed-off-by: Alexey Romanov <avromanov@salutedevices.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240418100129.1691822-2-avromanov@salutedevices.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
While we unlikely to have an issue with CVE-2024-3651, it is simple
enough to bump our version of idna to receive the fix, do so.
Reported-by: GitHub dependabot
Signed-off-by: Tom Rini <trini@konsulko.com>
Tested-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The README.trace has been moved and converted to rst in commit dce26c7d56ed
("doc: move README.trace to HTML documentation"); fix all the remaining
references to this file.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Tom Rini <trini@konsulko.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The 2 subsections of this page ("Compatible IDEs" and "Usage") are using
the same header level as the title (with "===").
Because of this, they always appear in the HTML rendered ToC.
Drop the subsections one level lower by replacing "=" by "-".
This fixes the HTML rendering.
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
