Add a new get_max_pwr_mode callback to permit the UFS controller
driver manipulate the max_pwr_mode struct right before setting
the new pwr_mode to the UFS device.
It can be used to limit the HS Gear with errata and hardware
limitations on some UFS controllers.
Tested-by: Julius Lehmann <lehmanju@devpi.de>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> #rb3gen2
Link: https://lore.kernel.org/r/20240910-topic-ufs-qcom-controller-v1-2-54c0d2231b10@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add device_reset op to permit resetting the UFS device if
the UFS controller drivers supports the operation.
Tested-by: Julius Lehmann <lehmanju@devpi.de>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> #rb3gen2
Link: https://lore.kernel.org/r/20240910-topic-ufs-qcom-controller-v1-1-54c0d2231b10@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Sync u-boot UFS driver to add all possible UFS Quirks
as supported by Linux UFS driver as well.
Synced with include/ufs/ufshcd.h from Linux v6.11 release
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Tested-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Tested-by: Julius Lehmann <lehmanju@devpi.de>
Link: https://lore.kernel.org/r/20240930-topic-ufs-enhancements-v3-9-58234f84ab89@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add definition of 'ufshcd_rmwl()' helper function
which would be later used by Qualcomm UFS driver
to read-modify-write registers.
Ported from Linux kernel commits:
e785060ea3a1 ("ufs: definitions for phy interface")
cff91daf52d3 ("scsi: ufs: Fix kernel-doc syntax in ufshcd.h")
Signed-off-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Tested-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Tested-by: Julius Lehmann <lehmanju@devpi.de>
Link: https://lore.kernel.org/r/20240930-topic-ufs-enhancements-v3-7-58234f84ab89@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add UFSHCD_QUIRK_HIBERN_FASTAUTO quirk for host controllers which supports
auto-hibernate the capability but only FASTAUTO mode.
Ported from Linux kernel commit
2f11bbc2c7f3 ("scsi: ufs: core: Add UFSHCD_QUIRK_HIBERN_FASTAUTO")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tested-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Tested-by: Julius Lehmann <lehmanju@devpi.de>
Link: https://lore.kernel.org/r/20240930-topic-ufs-enhancements-v3-6-58234f84ab89@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS for host controllers which do not
support 64-bit addressing.
Ported from Linux kernel commit
6554400d6f66 ("scsi: ufs: core: Add UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS")
with ufs_scsi_buffer_aligned() based on U-Boot generic bounce buffer.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tested-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Tested-by: Julius Lehmann <lehmanju@devpi.de>
Link: https://lore.kernel.org/r/20240930-topic-ufs-enhancements-v3-5-58234f84ab89@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
Extend the version check to handle UFS 3.1 controllers as well.
Tested on QEMU emulated UFS 3.1 controller.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Extend the version check to handle UFS 3.0 controllers as well.
Tested on R-Car S4 UFS 3.0 controller.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Tested-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Add UFSHCD_QUIRK_HIBERN_FASTAUTO quirk for host controllers which supports
auto-hibernate the capability but only FASTAUTO mode.
Ported from Linux kernel commit
2f11bbc2c7f3 ("scsi: ufs: core: Add UFSHCD_QUIRK_HIBERN_FASTAUTO")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Tested-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Add UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS for host controllers which do not
support 64-bit addressing.
Ported from Linux kernel commit
6554400d6f66 ("scsi: ufs: core: Add UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS")
with ufs_scsi_buffer_aligned() based on U-Boot generic bounce buffer.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Tested-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
Use BIT() macro for quirks, no functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Bhupesh Sharma <bhupesh.sharma@linaro.org>
At this point, the remaining places where we have a symbol that is
defined as CONFIG_... are in fairly odd locations. While as much dead
code has been removed as possible, some of these locations are simply
less obvious at first. In other cases, this code is used, but was
defined in such a way as to have been missed by earlier checks. Perform
a rename of all such remaining symbols to be CFG_... rather than
CONFIG_...
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This header file should not be included in other header files. Remove it
and use a forward declaration instead.
Also drop asm/io.h
Signed-off-by: Simon Glass <sjg@chromium.org>
Add Support for UFS Host Controller Interface (UFSHCI) for communicating
with Universal Flash Storage (UFS) devices. The steps to initialize the
host controller interface are the following:
- Initiate the Host Controller Initialization process by writing to the
Host controller enable register.
- Configure the Host Controller base address registers by allocating a
host memory space and related data structures.
- Unipro link startup procedure
- Check for connected device
- Configure UFS host controller to process requests
Also register this host controller as a SCSI host controller.
Taken from Linux Kernel v5.2 (drivers/scsi/ufs/ufshcd.c) and ported to
U-boot.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
