Upstream kernel linux clock include use TOP_DA_SEL instead of
TOP_DA_SELM_XTAL_SEL.
Rename this clock to the upstream kernel in preparation for support of
OF_UPSTREAM.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Upstream kernel linux clock include use TOP_XTAL instead of CB_CKSQ_40M.
Rename this clock to the upstream kernel in preparation for support of
OF_UPSTREAM.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi <ansuelsmth@gmail.com> says:
These are all the required patches to migrate clk and correctly support
OF_UPSTREAM. This will align the clk index to upstream to support the same
clk implementation with downstream and upstream DTS.
Replace infracfg clk ID with upstream linux version.
Add some missing clk for PWM3 and for PCIe. The same format is used here
with the factor first, then mux and then gates.
To correctly reference the gates in clk_gate function, define the
gates_offs value in clk_tree now that they are at an offset from mux and
factor.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Now that we can have advanced parent handling for mux, we can drop
spurious infracfg 1/1 factor. This is in preparation to make the clk
ID match the ID in upstream include for mt7981.
Drop the factor entry from mt7981-clk.h and reference to them in
mt7981.dtsi. Muxes and gates are updated to reference the topckgen clk
following how it's done in upstream kernel linux. Add relevant clk type
flag in clk_tree for infracfg and topckgen.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add missing clock for infra_ipcie_pipe to make PCIe correctly work. This
clock is a parent of the fixed clock from topckgen cb_cksq_40m.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Define id_offs_map and use clk ID form upstream linux kernel to have a
1:1 match for the TOPCKGEN clock and permit usage of OF_UPSTREAM with
upstream dtsi.
For all the gate clock, the clk ID starts from 1 instead of zero. Define
an additional clock tree for them and set the .gates_offs to 1 to
account for this.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Most Rockchip aarch64 targets have now migrated to use OF_UPSTREAM,
however a few of the old dtsi and dt-bindings files still remain.
Remove remaining common dtsi and header files that can be included
directly from dts/upstream to prevent possible issues when future tags
from devicetree-binding is merged. No changes is expected with this.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
The commit f087f7fd277d ("rockchip: px30/rk3326: migrate to
OF_UPSTREAM") migrated px30/rk3326 boards to use OF_UPSTREAM, however
the soc dtsi and dt-bindings files remained.
Remove the remaining px30/rk3326 soc dtsi and dt-bindings to ensure the
files from dts/upstream is used.
The gpio-ranges props is moved to u-boot.dtsi files and a ethernet0
alias is added to px30-firefly, they are missing in the dts/upstream
files. No changes are expected with this.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
IPQ4019 clock dt-bindings are available in Linux upstream, and we can just
use those instead of carrying a downstream file that matches the upstream one
anyway.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Remove the leftover Amlogic GX/G12 bindings headers that
maked the v6.10 upstream DT fail to build.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The clock definitions in <dt-bindings/clock/r8a779?-clock.h> were
superseded by those in <dt-bindings/clock/r8a779?-cpg-mssr.h> a long
time ago.
In fact U-Boot never used <dt-bindings/clock/r8a779?-clock.h>.
The unused headers, their replacements, and the corresponding
r8a779?.dtsi files were introduced together in U-Boot v2018.03.
Fixes: 16b6e4aa3732cee1 ("ARM: dts: rmobile: Import R8A7790 DTS from Linux 4.15-rc8")
Fixes: edd15fcffba31452 ("ARM: dts: rmobile: Import R8A7791 DTS from Linux 4.15-rc8")
Fixes: a3fb9ff3b33fae05 ("ARM: dts: rmobile: Import R8A7792 DTS from Linux 4.15-rc8")
Fixes: 92aa09959271d08f ("ARM: dts: rmobile: Import R8A7793 DTS from Linux 4.15-rc8")
Fixes: 9a26fc5a73fe2369 ("ARM: dts: rmobile: Import R8A7794 DTS from Linux 4.15-rc8")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Drop redundant header imports with dts/upstream already providing
updated headers which have been checked to be backwards compatibility.
The imx headers which aren't present in dts/upstream are as follows:
- include/dt-bindings/clock/imxrt1020-clock.h
- include/dt-bindings/clock/imx8qm-clock.h
- include/dt-bindings/clock/imxrt1170-clock.h
- include/dt-bindings/clock/imx8qxp-clock.h
- include/dt-bindings/memory/imxrt-sdram.h
- include/dt-bindings/pinctrl/pads-imx8qxp.h
- include/dt-bindings/pinctrl/pads-imx8qm.h
- include/dt-bindings/soc/imx8_pd.h
- include/dt-bindings/soc/imx_rsrc.h
hence these aren't dropped yet but there was an unused header:
- include/dt-bindings/pinctrl/pins-imx8mq.h
which has been dropped as well. There shouldn't be any funtional impact
with this change but it rather allows iMX platforms to use upstream
dt-bindings headers in a backwards compatible manner.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Use upstream device tree files and bindings. To do so:
- imply (enable) OF_UPSTREAM option for E850-96 target
- point DEFAULT_DEVICE_TREE in E850-96 config to upstream dts
- remove now not needed local dts files, binding docs and headers
- update MAINTAINERS and board/samsung/e850-96/MAINTAINERS
correspondingly
Upstream device tree files for Exynos850 SoC and E850-96 board are
pretty much the same as local (removed) ones, so the conversion is
rather straightforward and painless in this case. The appended dts file
(arch/arm/dts/exynos850-e850-96-u-boot.dtsi) stays unchanged.
The only remaining local dt-bindings doc for E850-96 board is
exynos-pmu.yaml. It wasn't removed as it's quite different from Linux
kernel version. Particularly U-Boot local version of exynos-pmu.yaml
describes "samsung,uart-debug-1" property, which is not present in Linux
kernel binding. Later it might be upstreamed to Linux kernel, and once
it's done the U-Boot exynos-pmu.yaml binding can be removed.
No functional change.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Migrate RV1126 boards that exists in Linux v6.8 to use OF_UPSTREAM.
Following targets is migrated to use OF_UPSTREAM:
- rv1126-edgeble-neu2 : Board is an industrial form factor
IO board.
- sonoff-ihost-rv1126 : Gateway device designed to provide a
Smart Home Hub.
Cc: Tim Lunn <tim@feathertop.org>
Cc: Jagan Teki <jagan@edgeble.ai>
Reviewed-By: Tim Lunn <tim@feathertop.org>
Tested-By: Tim Lunn <tim@feathertop.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Anand Moon <anand@edgeble.ai>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
After the conversion of RV1108 to OF_UPSTREAM,
include/dt-bindings/clock/rv1108-cru.h is no longer needed because
there is dts/upstream/include/dt-bindings/clock/rv1108-cru.h from
upstream Linux.
Remove the unneeded rv1108-cru.h file.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.
This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.
Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>
Roger Quadros <rogerq@kernel.org> says:
Sync AM62 device tree files with Linux v6.9 and
add in the missing bits in -u-boot.dtsi to get CPSW
Ethernet working.
CI testing: https://github.com/u-boot/u-boot/pull/534
Greg Malysa <greg.malysa@timesys.com> says:
This series adds support for the ADI SC5xx machine type and includes two
core drivers that are required for being able to boot any board--a UART
driver, the gptimer driver which is used as a clock reference (CNTVCNT
is not supported on the armv7 sc5xx SoCs) and the clock tree driver. Our
corresponding Linux support relies on u-boot configuring the clocks
correctly before booting, so it is not possible to boot any board
without the CGU/CDU configuration happening here. There are also no
board files, device trees, or defconfigs included here, but some common
definitions that will be used to build board files currently are. The
sc5xx SoCs themselves include many armv7 families (sc57x, sc58x, and
sc594) all using an ARM Cortex-A5, and one armv8 family (sc598) indended
to be a drop-in replacement for the SC594 in terms of peripherals, with
a Cortex-A55 instead.
Some of the configuration code in dmcinit and clkinit is quite scary and
causes a lot of checkpatch violations. It is modified from code
initially provided by ADI, but it has not been fully rewritten. There's
a question of how important it is to clean up this code--it has some
quality violations, but it has been in use (including in production) for
over two years and is known to work for performing the low level SoC
initialization, while a rewrite might introduce timing or sequence bugs
that could take a significant amount of time to detect in the future.
This adds support for the SC5XX clock trees which are required for reading
clock speeds on the SoCs. This is largely a port of the same support for
Linux, which has not yet been submitted upstream.
Co-developed-by: Greg Malysa <greg.malysa@timesys.com>
Signed-off-by: Greg Malysa <greg.malysa@timesys.com>
Co-developed-by: Ian Roberts <ian.roberts@timesys.com>
Signed-off-by: Ian Roberts <ian.roberts@timesys.com>
Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas@analog.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
Signed-off-by: Arturs Artamonovs <arturs.artamonovs@analog.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Remove redundant device tree files now that RK3588 boards have been
migrated to use OF_UPSTREAM.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Remove redundant device tree files now that RK356x boards have been
migrated to use OF_UPSTREAM.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Remove redundant device tree files now that RK3399 boards have been
migrated to use OF_UPSTREAM.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Remove redundant device tree files now that RK3328 boards have been
migrated to use OF_UPSTREAM.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Remove redundant device tree files now that RK3308 boards have been
migrated to use OF_UPSTREAM.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Sync rk3399-cru.h with one from Linux kernel v6.2+ and fix use of the
SCLK_DDRCLK name that was only used by U-Boot.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
- A new driver in the misc to register setting from device tree. This
also provides user a clean interface and all register settings are
centralized in one place, device tree.
- Enable Agilex5 platform for Intel product. Changes, modification and
new files are created for board, dts, configs and makefile to create
the base for Agilex5.
Build-tested on SoC64 boards, boot tested on some of them.
This patch is to enable Agilex5 platform for Intel
product. Changes, modification and new files are
created for board, dts, configs and makefile to
create the base for Agilex5.
Signed-off-by: Jit Loon Lim <jit.loon.lim@intel.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
Import the headers needed for QCS404-evb.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Import dt-binding headers for MSM8996/APQ8096 from Linux.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Import the dt-bindings headers in preparation for switching to upstream
DTS for MSM8916.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Import the DT bindings headers that are used by SDM845 from Linux.
Taken from kernel tag v6.7
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Use the root compatible strings from upstream Linux, add missing
'#clock-cells' property to the gcc node.
Adjust some of the msm8916/apq8016 drivers to use the correct upstream
compatible properties and DT bindings.
This prepares us to switch to upstream DT in a future patch.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Sumit Garg <sumit.garg@linaro.org> #qcs404
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Add bindings documentation and the header file for Exynos850 clock
controller. It was taken from Linux kernel [1,2].
[1] Documentation/devicetree/bindings/clock/samsung,exynos850-clock.yaml
[2] include/dt-bindings/clock/exynos850.h
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Qualcomm's clock controller blocks actually do much more than it
says on the tin.. They provide clocks, resets and power domains.
Currently, U-Boot requires one to spawn 2 separate devices for
controlling clocks and resets, both spanning the same register space.
Refactor the code to make it work with just a single DT node, making
it compatible with upstream Linux bindings and dropping the dedicated
reset driver in favour of including it in the clock driver.
Heavily inspired by Renesas code for a similar hw block.
[caleb: moved drivers to clk/qcom, added reset driver and adjusted bind
logic. Imported qcom,gcc-ipq4019.h from Linux]
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Julien Masson <jmasson@baylibre.com> says:
This patch series add the support for the MediaTek MT8365 EVK Board [1].
Most of the code have been copied/adapted from Linux tag v6.7-rc2.
For now we only enable/test these features:
Boot, UART, Watchdog and MMC.
[trini: This includes two clocks not listed in the Linux binding, which
needs resyncing later]
This adds the clock bindings for Mediatek MT8365 SoC based on the
dt-bindings in Linux tag v6.7-rc2.
(commit c61978175ac1337f028ac1f956666f16db84f4e5)
Signed-off-by: Julien Masson <jmasson@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
