Add Android bootflow support for AM62X SK EVM board with
new android boot method.
To build for AM62x for Android, we use the
am62x_a53_android.config fragment when building A53 bootloaders:
$ make am62x_evm_a53_defconfig
$ make am62x_a53_android.config
$ make
Co-developed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
findfdt is used by bootcmd_ti_mmc by default which used to help populate
the fdtfile. The users of findfdt from bootcmd_ti_mmc have migrated to
ti_set_fdt_env for populating fdtfile; Hence, findfdt can be removed from
bootcmd_ti_mmc having no-impact for any platform.
Remove findfdt to not print out the warning that gets set after calling
ti_set_fdt_env. viz.
"echo WARN: fdtfile already set. Stop using findfdt in script"
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
name_fdt is kept for backward compatibility but it depends on EEPROM
detection logic and some of the TI K3 platforms don't have that anymore
which causes boot failure in legacy boot flow using bootcmd_ti_mmc.
K2g platforms which uses the same file have their own override causing
this change to be no-impact for them.
Replacing name_fdt usage to fdtfile as fdtfile is populated based on
CONFIG_DEFAULT_DEVICE_TREE after using ti_set_fdt_env.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
According to [0], raw access to mmc should not have mmcpart in the
entry. This was fixed in k3_dfu_combined.env but k3_dfu.env had been
overlooked.
[0] doc/usage/dfu.rst
Fixes: 53b406369e9d ("DFU: Check the number of arguments and argument string strictly")
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Secure firmwares must be loaded if SOC is secure,
currently rproc framework chooses non-secure firmware always.
So adding support to load secure firmware, when SOC is secure
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
We shouldn't need finfdt anymore. Drop the env script.
Reviewed-by: Jonathan Humphreys <j-humphreys@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Nishanth Menon <nm@ti.com>
By default this variable is unset and this causes the test condition to
fail on devices that don't have this defined. Set a default value for
this.
=> boot
## Error: "main_cpsw0_qsgmii_phyinit" not defined
[...]
Fixes: 0d72b0f2f83b ("include: env: ti: ti_common: Run main_cpsw0_qsgmii_phyinit conditionally")
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
The main_cpsw0_qsgmii_phyinit command is defined only for certain TI
SoCs which have the do_main_cpsw0_qsgmii_phyinit variable set.
Add a check to ensure that the main_cpsw0_qsgmii_phyinit command is run
only for such SoCs.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
After the refactor with conf- nodes in fitImage, overlaystring wasn't
didn't handle the new conf- nodes in FIT Booting. Fix get_overlaystring
to handle conf- nodes.
Fixes: 837833a724b7 ("environment: ti: Add get_fit_config command to get FIT config string")
Reported-by: Aniket Limaye <a-limaye@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
ti_mmc bootmethod uses a findfdt routine that is expected to be
implemented by all platforms.
Define a default findfdt based on configured DEFAULT_DEVICE_TREE option
for u-boot. This saves duplication across multiple boards and handles
architecture folder location changes centrally.
TI ARMV7 platforms will need to override default_device_tree_subarch
in the env file to point to the appropriate platform. Note: default
"omap" is used to cater to "most common" default.
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
ti_armv7_common does not make any more sense as it is used by armv7
and armv8 TI based platforms.
Reported-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
'script' bootmethod that should be used with CONFIG_BOOTSTD.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
If mmc dev reports that the device is not present, there is no point in
proceeding further to attempt to load the files.
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
The 'environment' word is too long. We mostly use 'env' in U-Boot, so use
that as the name of the include directory too.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
