Introduce a defconfig for the Ride R3 and other QCS9100 boards with a
dedicated uefi partition. These can replace EDK2 entirely with U-Boot.
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/20250110050817.3819282-7-quic_varada@quicinc.com
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Add initial set of clocks and resets for enabling U-Boot on QCS9100
based Ride platforms.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Link: https://lore.kernel.org/r/20250110050817.3819282-4-quic_varada@quicinc.com
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Add device tree support for the QCS9100 Ride and Ride Rev3 boards. The
QCS9100 is a variant of the SA8775p, and they are fully compatible with
each other. The QCS9100 Ride/Ride Rev3 board is essentially the same as
the SA8775p Ride/Ride Rev3 board, with the QCS9100 SoC mounted instead
of the SA8775p.
Signed-off-by: Tengfei Fan <quic_tengfan@quicinc.com>
Reviewed-by: Konrad Dybcio <konradybcio@kernel.org>
Link: https://lore.kernel.org/r/20240911-add_qcs9100_support-v2-4-e43a71ceb017@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
[ upstream commit: 7dcc1dfaa3d1cd3aafed2beb7086ed34fdb22303 ]
(cherry picked from commit db6231faa8ef46e5ff5d5ece0c930a07c6358562)
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Link: https://lore.kernel.org/r/20250110050817.3819282-2-quic_varada@quicinc.com
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Replace delay_ns by delay_us which is the field name used into
struct cyclic_info.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Stefan Roese <sr@denx.de>
On 32 bits platforms, timer_get_us() returns an unsigned long which
is a 32 bits. timer_get_us() wraps around every 72 minutes
(2 ^ 32 / 1000000 =~ 4295 sec =~ 72 min).
So the test "if time_after_eq64(now, cyclic->next_call)" is no more
true when cyclic->next_call becomes above 32 bits max value (4294967295).
At this point after 72 min, no more cyclic function are
executed included watchdog one.
Instead of using timer_get_us(), use get_timer_us() which returns a
uint64_t, this allows a rollover every 584942 years.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Weijie Gao <weijie.gao@mediatek.com> says:
This patch series migrates MediaTek MT7629 to OF_UPSTREAM
Changes in v2:
* Remove mt7629-rfb.dtb from arch/arm/dts/Makefile
* Add wdt-reboot node to make reset command work
Link: https://lore.kernel.org/r/cover.1736851116.git.weijie.gao@mediatek.com
david regan <dregan@broadcom.com> says:
Updates for Broadcom bcmbca devices,
make use of OF_UPSTREAM which uses Linux dts,
update bcmbca dts to current nand node naming convention,
enable basic nand functionality for bcmbca devices.
Link: https://lore.kernel.org/r/20250114045425.148801-1-dregan@broadcom.com
Add defconfig & devicetree for IBM SBP1 board BMC based on AST2600 SoC.
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Move differences in DT files between upstream Linux DT and U-Boot DT to
mt7629-rfb-u-boot.dtsi.
Remove old copies of mt7629-related clock bindings, .dts, and .dtsi files.
Update defconfig to switch the whole mt7629 SoC to use OF_UPSTREAM.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
The clock definitions in mt7629-clk.h indicate that CLK_PERIBUS_SEL is the
first element in the pericfg clock tree and also serves as a clock mux,
unlike other clocks belonging to the clock gate in pericfg.
This make the clock consumer get a wrong clock gate during request a clock
from <&pericfg>.
Since CLK_PERIBUS_SEL clock is not required in U-Boot, add a clock gate
offset for the pericfg clock tree to resolve this problem.
Signed-off-by: Sam Shih <sam.shih@mediatek.com>
Signed-off-by: Weijie Gao <weijie.gao@mediatek.com>
Enable rudimentary nand read/write capability.
Changes in v2:
- New patch in series added enabling of nand functionality
Signed-off-by: david regan <dregan@broadcom.com>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Anand Gore <anand.gore@broadcom.com>
Update bcmbca dts to current nand node naming convention.
Changes in v2:
- Removed addition of nand-on-flash-bbt parameter
Signed-off-by: david regan <dregan@broadcom.com>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Anand Gore <anand.gore@broadcom.com>
Make use of OF_UPSTREAM which uses Linux dts.
Changes in v2:
- Removed enabling of nand functionality
Signed-off-by: david degan <dregan@broadcom.com>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Reviewed-by: Anand Gore <anand.gore@broadcom.com>
OSPI flash writing was broken on am62x SKs as the OSPI flash device has a
256k sector size but was set to 20k. This breaks OSPI flash writes because
the current implementation of the SF DFU backend requires that the DFU data
buffer size be the same as the sector erase size, and the USB DFU config
fragment (for both A53 and R5) reduced the size of the DFU data buffer,
presumably so that it can fit into SPL's much smaller heap.
Change the SYS_DFU_DATA_BUF_SIZE to the erase sector size, which still fits
within the post-relocation heap size in SPL.
Fixes: dfc2dff5a844 ("configs: am62x_evm_*: Enable USB and DFU support")
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
When using the ACPI tables supplied by QEMU, we don't need to build the
FADT and MADT tables in U-Boot.
This patch avoids a build failure
make qemu-riscv64_smode_defconfig acpi.config
riscv64-linux-gnu-ld.bfd: lib/acpi/acpi_table.o:
in function `acpi_write_fadt':
lib/acpi/acpi_table.c:265:(.text.acpi_write_fadt+0x15c):
undefined reference to `acpi_fill_fadt'
riscv64-linux-gnu-ld.bfd: lib/acpi/acpi_table.o:
in function `acpi_write_madt':
lib/acpi/acpi_table.c:294:(.text.acpi_write_madt+0x52):
undefined reference to `acpi_fill_madt'
Fixes: f5f7962091e4 ("acpi: x86: Write FADT in common code")
Fixes: 4a3fc0f525da ("acpi: x86: Move MADT to common code")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Tom Rini <trini@konsulko.com> says:
One problem we have today is how the BLK symbol is set and used in
Kconfig files. Part of the challenge is that we use it as a gating
symbol for "we have a block device" and also for "enable block device
library code". What this series does is move to always use "select BLK"
by block drivers (a few were and a few others had it the inverse) and
then "depends on BLK" for functionality that needs a block device
present. The end result of this series is that a number of platforms
which had disabled EFI_LOADER now don't ask for it (they have no block
device) and espresso7420 has a regression about MMC support fixed. With
v2 of this I've picked up the review tags from v1 and also reworded the
body of the commit in the first patch.
Link: https://lore.kernel.org/r/20250115012322.215243-1-trini@konsulko.com
Now that block drivers are all selecting the BLK symbol, there's no need
for other options to be select'ing BLK so that other required
functionality can be enabled. Remove these places.
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
In the case of MTD_BLOCK and UBI_BLOCK they should be select'ing BLK as
they provide block device functionality and not depending on some other
block device already being enabled too (as is the typical case).
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
The BLK symbol has a few meanings, one of which is that it controls the
driver model portion of a "block device". Rather than having this hidden
symbol be "default y if ..." it should be select'd by the various block
subsystems. Symbols such as PVBLOCK which already select'd BLK are
unchanged".
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
In reworking the BLK usage in Kconfig, I found there's a few issues with
EFI_LOADER=y and BLK=n. In general, we can easily say that
lib/efi_loader/efi_file.c also should only be built with CONFIG_BLK.
That however leaves the bootmgr code, eficonfig code and then parts of
efi_device_path.c, efi_boottime.c and efi_setup.c which functionally
depend on BLK. While these calls can be if'd out, I'm unsure if the
result is usable. So rather than leave that buildable and imply that it
is, I'm leaving that combination non-buildable and commenting that
EFI_LOADER depends on BLK in the Kconfig currently.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
At this point in time, DM is always enabled. So if MMC is enabled, it
should select DM_MMC. No drivers need to depend on DM_MMC being enabled
now, so remove that from dependency lists. This now means that a number
of platforms which select'd DM_MMC need to select MMC instead. This also
fixes a migration problem with espresso7420 in that MMC is built again
with the platform.
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
At this point in time, we know that with the MMC symbol enabled we will
always also have the BLK symbol enabled, so we do not need to list that
as a dependency for MMC drivers.
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Delete tifs DT node as part of fixup.
TISCI API reported msmc_size, does not include 64KB reserved size for
tifs aka MSMC comms memory, see documentation[0].
As part of fixup, original code uses TISCI API reported msmc_size as
size for SRAM DT node.
tifs node is similar to l3-cache, which should hold address above
msmc_size, and should be deleted before passing control to OS.
[0] https://software-dl.ti.com/tisci/esd/latest/2_tisci_msgs/general/core.html?highlight=msmc#tisci-msg-query-msmc
Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Include k3_rproc.env to access rproc boot commands and specify rproc
firmware names for adding remoteproc support in J722S SoCs.
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
The default value for the mux to select the parent clock,
AUDIO_REFCLK1_CTRL_CLK_SEL is '11111' (31) but the mux input for 31
is marked as 'Reserved' so the ti-sci-clk call for get-parent fails.
Mark it to a valid value, '11100' (28) for MAIN_PLL4_HSDIV2_CLKOUT
to get rid of the linux failures during boot-time like:
"[ 1.573193] ti-sci-clk 44083000.system-controller:clock-controller:
get-parent failed for dev=157, clk=34, ret=-19"
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Upstream development stopped 2012.
Linux eliminated YAFFS2 in 2010.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
When converting to ofnode `ofnode_read_u32` was accedentally used to
replace `fdtdec_get_int` instead of `ofnode_read_u32_default`.
Use `ofnode_read_u32_default` to fix this.
Fixes: 59382d2 ("pinctrl: imx: Convert to use livetree API for fdt access")
Signed-off-by: Jesse Taube <Mr.Bossman075@gmail.com>
Guard binman nodes with CONFIG_OPTEE to fix the following error
when building without optee support:
BINMAN .binman_stamp
Image 'image' has faked external blobs and is non-functional: tee.bin
Image 'image' is missing optional external blobs but is still functional: tee-os
/binman/section/fit/images/tee/tee-os (tee.bin):
See the documentation for your board. You may need to build Open Portable
Trusted Execution Environment (OP-TEE) and build with TEE=/path/to/tee.bin
Some images are invalid
make: *** [Makefile:1135: .binman_stamp] Error 103
While at it, only pass tee to the loadables lines when CONFIG_OPTEE is
defined.
Reported-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Tested-by: Yannic Moog <y.moog@phytec.de>
i.MX95 uses enetc version 4.1 controller. Update the enetc for i.MX95.
Add ARM-specific cache handling and i.MX95 specific register layout
handling.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Marek Vasut <marex@denx.de> # Clean up
Signed-off-by: Ye Li <ye.li@nxp.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
The verdor ID and device ID of i.MX95 EMDIO are different from LS1028A
EMDIO, so add new vendor ID and device ID to pci_device_id table to
support i.MX95 EMDIO.
Signed-off-by: Alice Guo <alice.guo@nxp.com>
Signed-off-by: Marek Vasut <marex@denx.de> # Clean up
Signed-off-by: Ye Li <ye.li@nxp.com>
The netc-blk-ctrl driver is used to configure Integrated Endpoint
Register Block (IERB) and Privileged Register Block (PRB) of NETC.
For i.MX platforms, it is also used to configure the NETCMIX block.
The IERB contains registers that are used for pre-boot initialization,
debug, and non-customer configuration. The PRB controls global reset
and global error handling for NETC. The NETCMIX block is mainly used
to set MII protocol and PCS protocol of the links, it also contains
settings for some other functions.
Note the IERB configuration registers can only be written after being
unlocked by PRB, otherwise, all write operations are inhibited. A warm
reset is performed when the IERB is unlocked, and it results in an FLR
to all NETC devices. Therefore, all NETC device drivers must be probed
or initialized after the warm reset is finished.
Ported from Linux 6.13-rc as of commit
fe5ba6bf91b3 ("net: enetc: add initial netc-blk-ctrl driver support")
Signed-off-by: Marek Vasut <marex@denx.de>
Pass struct udevice * into the register accessors, so the accessors can reach
driver data, which contain device specific register offsets.
Signed-off-by: Marek Vasut <marex@denx.de>
Introduce driver data for each PCI device. The driver data carry
offsets of registers which differ between different SoCs.
Signed-off-by: Marek Vasut <marex@denx.de>
Split register accessors to the port base/station interface/port/mac
registers as those are at different offsets on different SoCs. This
is a preparatory patch which will allow addition of adjusted offsets
for new SoCs easily.
Signed-off-by: Marek Vasut <marex@denx.de>
Move register accessors from header files and turn them into proper
inline functions, so typechecking can be done on them. Drop no longer
enetc_port_regs() and unused enetc_read() and enetc_bdr_read().
Signed-off-by: Marek Vasut <marex@denx.de>
Introduce mapping function enetc_dev_id(), which converts PCIe BDF of
the ENETC into linear incrementing index usable e.g. as interface index.
This replaces the current ad-hoc calculation used in the code with a
dedicated function. No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Rename the current driver structure and matching ops and PCI IDs
and add _ls suffix to indicate this content is LS specific. This
is done in preparation for addition of i.MX95 ENETCv4 which will
require slightly different structure content.
Signed-off-by: Marek Vasut <marex@denx.de>
Pass udevice pointer into enetc_enable_si_port() so tests like
enetc_is_ls1028a() an be used in the function. No functional
change.
Signed-off-by: Marek Vasut <marex@denx.de>
The entire content of the loop can be folded into enetc_set_ierb_primary_mac(),
do it. This changes the behavior slightly such that the DT is only updated in
case of a LS1028A, which is the only SoC with ethernet MAC path in DT matching
"/soc/pcie@1f0000000/ethernet@%x,%x" anyway, so this slight change should have
no impact.
Signed-off-by: Marek Vasut <marex@denx.de>
Use enetc_is_ls1028() instead of ifdef around enetc_set_ierb_primary_mac()
and clean up the function. No functional change intended.
Signed-off-by: Marek Vasut <marex@denx.de>
Introduce accurate test for LS1028A compatibility based both on
IS_ENABLED(CONFIG_ARCH_LS1028A) and PCI vendor ID. This is done
in preparation for adding ENETCv4 support, which has a different
PCI vendor ID.
Signed-off-by: Marek Vasut <marex@denx.de>
Philippe Reynes <philippe.reynes@softathome.com> says:
This serie adds the support of sha256_hmac and sha256_hkdf.
A first version was sent several months ago just before the
integration of mbedtls. This new version is based on mbedtls.
The first patch of this serie add the support of hkdf
using mbedtls.
Link: https://lore.kernel.org/r/20241219130554.49825-1-philippe.reynes@softathome.com
Adds a test for the function sha256_hkdf.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Raymond Mao <raymond.mao@linaro.org>
Adds the support of key derivation using the scheme hkdf.
This scheme is defined in rfc5869.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Reviewed-by: Raymond Mao <raymond.mao@linaro.org>
