The struct contains an iomem pointer that we later remap and update.
Remove const from the struct definition.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
When adding the symlink for the conf file so qemu_arm64_lwip uses
qemu_arm64 configuration information, the symlink for the boardenv file
was missed in Gitlab (but not Azure). Add that in now.
Fixes: fd10d156db3f ("CI: add qemu_arm64_lwip to the test matrix")
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
The Acer Iconia A500 is a tablet computer designed, developed and
marketed by Acer Inc. It is powered by 1 GHz Nvidia Tegra 2 processor
and 1GB DDR2 RAM. The A500 is sold with 64 GB, although both 16 GB
and 32 GB models are available.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Add empty weak assembler function armv8_switch_to_el2_prep() which is
jumped to just before U-Boot determines which EL it is running in and
decides which path to take to boot the Linux kernel. Add
IH_TYPE_TFA_BL31 into supported images type, to allow implementation of
board specific U_BOOT_FIT_LOADABLE_HANDLER(IH_TYPE_TFA_BL31, ...) TFA
BL31 loadable handler for fitImages.
This PR contains common hooks which are noop, R-Car Gen4 board specific
implementation using these hooks is coming in next PR.
Add support for starting TFA from U-Boot running in EL3 as part of
fitImage boot, so the user can start U-Boot in the highest privilege
level on the platform, bundle TFA, Linux, DT into a single fitImage
and boot such a bundle as a whole.
There are two main benefits of this approach. First is the ability
to run U-Boot in EL3, where it has unrestricted access to the entire
system and can act as a useful debug tool, as it was always intended
to be used. Second is the ability to easily and safely update of any
component in the fitImage, be it TFA, Linux or DT.
The boot process is similar to regular Linux with DT fitImage boot
process, except the TFA has to be bundled into the fitImage. For the
bundling instructions, see below. The TFA is started as a 'loadables'
with custom U_BOOT_FIT_LOADABLE_HANDLER and armv8_switch_to_el2_prep()
handling implemented in board code, and performing the handoff and
boot in case the TFA was loaded.
The loadables handler is optional and meant to set up any sort of
handoff structures used by the TFA BL31 or perform any other setup
that is needed by the blob. The custom armv8_switch_to_el2_prep()
has to implement the jump to TFA BL31 with return to U-Boot just
before booting the Linux kernel.
Example fitImage image and configuration section:
/dts-v1/;
/ {
description = "Linux kernel with FDT blob and TFA BL31";
images {
kernel-1 { ... };
fdt-1 { ... };
atf-1 { /* This is the TFA BL31 image */
description = "TFA BL31";
data = /incbin/("../build/plat/release/bl31.bin");
type = "tfa-bl31";
arch = "arm64";
os = "arm-trusted-firmware";
compression = "none";
load = <0x46400000>;
entry = <0x46400000>;
};
};
configurations {
default = "conf-1";
conf-1 {
description = "Boot Linux";
kernel = "kernel-1";
fdt = "fdt-1";
loadables = "atf-1"; /* This is the TFA BL31 loadable */
};
};
};
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Add empty weak assembler function armv8_switch_to_el2_prep() which is
jumped to just before U-Boot determines which EL it is running in and
decides which path to take to boot the Linux kernel.
This weak function is meant to be used by architecture specific code
to implement jump to a firmware blob, which then returns right past
this weak function and continues execution of U-Boot code which then
boots the Linux kernel. One example of such use case is when U-Boot
jump tp TFA BL31, which switches from EL3 to EL2 and then returns to
U-Boot code newly running in EL2 and starts the Linux kernel.
The weak function is called with caches already disabled and DM shut
down. Any preparatory work or even loading of more data must be done
in board_prep_linux(), this hook is meant only for the final jump to
the firmware and return to U-Boot before booting Linux.
Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
When we squash imported mbedtls, the git submodule "framework" was
preserved in the commit. However, U-Boot itself does not use git
submodule, and provides no .gitmodules file to specify the submodule
repository.
This is normally not an issue when cloning U-Boot repository. However,
when U-Boot is imported as a submodule, this will break git option
`--recurse-submodules` as it fails to resolve "framework".
As we do not use the submodule, remove it to unbreak existing workflows.
Fixes: 12f1212e95fe ("Merge commit '0344c602eadc0802776b65ff90f0a02c856cf53c' as 'lib/mbedtls/external/mbedtls'")
Signed-off-by: ZHANG Yuntian <yt@radxa.com>
PCBID1 seems to be high not only on TF600T, but on TF700T as well,
that caused boot failure for TF700T. Switching PCBID1 to PCBID7
should fix this issue.
Co-developed-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Ion Agorria <ion@agorria.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
net/lwip/wget.c/mbedtls_hardware_poll() is calling dm_rng_read() but
dependency is not recorded anywhere that's why depend on DM_RNG
when WGET_HTTPS is used.
Suggested-by: Michal Simek <michal.simek@amd.com>
Co-developed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Add unit tests for the library functions.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
[jf: drop unwanted change to lib/string.c]
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Implement library function strnstr().
Implement strstr() using strnstr().
Sort the includes.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
[jf: replace <stdint.h> by <limits.h>, folded from next patch]
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Find_option() is used to retrieve the block size value in an option
acknowledgment in response to a request containing a block size option
according to RFC2348.
The format of an OACK response is described in RFC2347 as
+-------+---~~---+---+---~~---+---+---~~---+---+---~~---+---+
| opc | opt1 | 0 | value1 | 0 | optN | 0 | valueN | 0 |
+-------+---~~---+---+---~~---+---+---~~---+---+---~~---+---+
The current implementation of find_option() only works if
* blksize is the first option
* lwip_strnstr() ignores the length parameter,
i.e. is implemented via strstr()
The OACK messages starts with 0x00 0x06. If 'blksize' is the first option,
strstr() reports a match when the first parameter points to 0x06. Adding
the string length of 'blksize' plus 2 to the location of the 0x06 byte
points to the value.
Find_option() would report a match for option 'blksize' if the response
contained an option called 'foo_blksize_bar'. In this case find_option()
would return 'bar' as the value string.
If 'blksize' were the second option, find_option() would return a pointer
to the second character of the value string.
Furthermore find_option() does not detect if the value string is NUL
terminated. This may lead to a buffer overrun.
Provide an implementation that correctly steps from option to option.
Fixes: 27d7ccda94fa ("net: lwip: tftp: add support of blksize option to client")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Tested-by: Jerome Forissier <jerome.forissier@linaro.org> (qemu_arm64_lwip)
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Move the initialization of the ethernet devices out of the new_netif()
function. Indeed, new_netif() accepts a struct device argument, which
is expected to be valid and active. The activation and selection of
this device are achieved by eth_init() (on first time the network
stack is used) and eth_set_current(). This is what takes care of the
ethrotate and ethact environment variables. Therefore, move these calls
to a new function: net_lwip_set_current(), and use it whenever a
net-lwip command is run.
This patch hopefully fixes the incorrect net-lwip behavior observed on
boards with multiple ethernet interfaces [1].
Tested on an i.MX8MPlus EVK equipped wih two ethernet ports. The dhcp
command succeeds whether the cable is plugged into the first or second
port.
[1] https://lists.denx.de/pipermail/u-boot/2025-January/576326.html
Reported-by: E Shattow <e@freeshell.de>
Tested-by: E Shattow <e@freeshell.de>
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
PLLD2 is a simple clock (controlled by 2 registers) and appears starting
from T30. Primary use of PLLD2 is as main HDMI clock parent.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
PLLD2 is a simple clock (controlled by 2 registers) and appears starting
from T30. Primary use of PLLD2 is as main HDMI clock parent.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Pin detection on t20 depends on node name. With recent changes
in node naming, let's remove '_' to be safe about both '_' or
'-' use.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Bind SYSRESET child to parent node since it does not have
its own node in the device tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Bind GPIO and SYSRESET children to parent node since they
do not have their own nodes in the device tree.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Requesting of PMIC's GPIO child should be done by binding
GPIO driver to PMIC's node is GPIO driver does not have
its own node.
This reverts commit c03cd98d1a163666b4addcdd9a34fc0c77dfd0a5.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
u-boot-dfu-20250211:
CI:
- https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/24556
Android:
- Handle boot images with missing DTB
Usb gadget:
- Fix nullptr in g_dnl when serial# is unset
- Add missing schedule() in f_mass_storage gadget
- Add support for STih407 in dwc3-generic
- Fix usb clocks on STih407
- Migrate STih407 to DM_USB_GADGET
Since DM_USB_GADGET is enable for this board, board_usb_init()
and board_usb_cleanup() can be removed.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250130163547.512990-9-patrice.chotard@foss.st.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Add STi glue logic to manage the DWC3 HC on STiH407
SoC family. It configures the internal glue logic and
syscfg registers.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20250130163547.512990-6-patrice.chotard@foss.st.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
STi will migrate to dwc3-generic driver, dwc3-sti-glue driver
can be removed.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20250130163547.512990-4-patrice.chotard@foss.st.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Since commit 6aa8bde8786d ("usb: host: ehci-generic: Remove DM_REGULATOR
flag") device_get_supply_regulator() returns -ENOSYS which is not handle
by ehci_enable_vbus_supply() and thus, ehci_usb_probe() return an error.
By enabling DM_REGULATOR flag, device_get_supply_regulator() return -ENOENT
which is handle and ehci_usb_probe() return 0.
This fixed the following issue:
stih410-b2260 =>usb start
starting USB...
Bus dwc3@9900000: Register 2000240 NbrPorts 2
Starting the controller
USB XHCI 1.00
Bus usb@9a03c00: USB OHCI 1.0
Bus usb@9a03e00: probe failed, error -38
Bus usb@9a83c00: USB OHCI 1.0
Bus usb@9a83e00: probe failed, error -38
scanning bus dwc3@9900000 for devices... 1 USB Device(s) found
scanning bus usb@9a03c00 for devices... data abort
pc : [<7df929b4>] lr : [<7df92918>]
reloc pc : [<7d6409b4>] lr : [<7d640918>]
sp : 7c73b848 ip : 9cf13c5c fp : 7c879d08
r10: 7c85d040 r9 : 7c74ded0 r8 : 09a03c00
r7 : 00000002 r6 : 7c85d080 r5 : 7c86a040 r4 : 00000000
r3 : 00000000 r2 : 00000000 r1 : 7c85d080 r0 : 7c85d040
Flags: nzCv IRQs off FIQs off Mode SVC_32
Code: 05853ae4 0affffe2 e59a2010 e59a300c (e5832010)
Resetting CPU ...
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250130163547.512990-3-patrice.chotard@foss.st.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
On STi platforms, all clocks are enabled by BOOTROM, so CONFIG_CLK is
not set as no clock driver for STI exists.
As ehci-generic and ohci-generic drivers are used on platforms where
CONFIG_CLK is set, clk_get_bulk() returns-ENOSYS in case of
stih410-b2260.
To avoid this error, add fixed clocks for ehci and ohci nodes for
stih410-b2260 to fix the following errors:
Bus usb@9a03c00: ohci_generic usb@9a03c00: Failed to get clocks (ret=-19)
Port not available.
Bus usb@9a03e00: ehci_generic usb@9a03e00: Failed to get clocks (ret=-19)
Port not available.
Bus usb@9a83c00: ohci_generic usb@9a83c00: Failed to get clocks (ret=-19)
Port not available.
Bus usb@9a83e00: ehci_generic usb@9a83e00: Failed to get clocks (ret=-19)
Port not available.
scanning bus dwc3@9900000 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Link: https://lore.kernel.org/r/20250130163547.512990-2-patrice.chotard@foss.st.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
In case "ums" command is used on platforms which don't implement
g_dnl_board_usb_cable_connected() and USB cable is not connected,
we stay inside sleep_thread() forever and watchdog is triggered.
Add schedule() call to avoid this issue.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20241202074644.5380-1-patrice.chotard@foss.st.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
The rules part of the template makes sure that this doesn't run until
specifically requested. Drop the check in the script itself, so it is
possible to trigger a run manually without re-pushing the tree.
Signed-off-by: Simon Glass <sjg@chromium.org>
Judith Mendez <jm@ti.com> says:
This patch series enables ESM reset configuration in board_init_f
for am62x and am62px devices.
This is necessary in order for error events to reset the system.
This patches are tested using watchdog to reset the system via ESM.
Link: https://lore.kernel.org/r/20250129234403.574766-1-jm@ti.com
Enable CONFIG_SPL_DRIVERS_MISC, CONFIG_SPL_MISC, CONFIG_ESM_K3
to probe the Main ESM and MCU ESM nodes.
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
On AM62A and AM62P devices, it is possible to route Main ESM error
events to MCU ESM. MCU ESM high error output can trigger the reset
logic to reset the device. So, for these devices we have Main ESM and
MCU ESM nodes in the device tree. Add functions to probe these nodes
if CONFIG_ESM_K3 is enabled.
Signed-off-by: Santhosh Kumar K <s-k6@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Add the optargs variable so that we can set optional arguments while
booting.
Signed-off-by: Nathan Morrisson <nmorrisson@phytec.com>
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
The env_fat_get_dev_part() function mostly returns a fixed string, set
via some Kconfig variable. However when the first character is a colon,
that means that the boot device number is determined at runtime, and
patched in. This requires altering the string.
So far this was done via some ugly and actually illegal direct write to
the .rodata string storage. We got away with this because U-Boot maps
everything as read/write/execute so far.
A proposed patch set actually enforces read-only (and no-execute)
permissions in the page tables, so this routine now causes an exception:
=======================
Loading Environment from FAT... "Synchronous Abort" handler, esr 0x9600004f, far 0xfffb7d4c
elr: 000000004a054228 lr : 000000004a05421c (reloc)
elr: 00000000fff7c228 lr : 00000000fff7c21c
.....
=======================
Rewrite the routine to do away with the dodgy string manipulation,
instead allocate the string in the r/w .data section, where we can
safely manipulate it.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Siddharth Vadapalli <s-vadapalli@ti.com> says:
Hello,
This series re-enables MUX_MMIO at U-Boot proper on J721E and J7200
SoCs. The commits which introduced support for Hyperflash boot on both
of these SoCs disabled MUX_MMIO functionality at U-Boot proper, thereby
introducing a regression.
Series is based on commit
2b1c8d3b2d cmd: Fix Kconfig coding style
of the master branch of U-Boot.
Link: https://lore.kernel.org/r/20250201091809.1894892-1-s-vadapalli@ti.com
Commit under Fixes introduced support for Hyperflash boot but also disabled
MUX_MMIO support at U-Boot proper. MUX_MMIO is required at U-Boot proper
to setup the SERDES Lane Mapping as described by the device-tree. On J7200
SoC, PCIe functionality is broken since commit under fixes.
Fix this regression by re-enabling MUX_MMIO.
Fixes: 038f6faea9f0 ("configs: j7200_evm_*_defconfig: Add configs for Hyperflash boot")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Reviewed-by: Anurag Dutta <a-dutta@ti.com>
Commit under Fixes introduced support for Hyperflash boot but also disabled
MUX_MMIO support at U-Boot proper. MUX_MMIO is required at U-Boot proper
to setup the SERDES Lane Mapping as described by the device-tree.
Fix this regression by re-enabling MUX_MMIO.
Fixes: fd7fcd4098d5 ("configs: j721e_evm_*_defconfig: Add configs for Hyperflash boot")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
emul_rtc_probe() is not called from anywhere else that's why make it
static. Issue is reported by build with W=1.
Signed-off-by: Michal Simek <michal.simek@amd.com>
