If env__pxe_boot_test_skip is not present, it defaults to True not
False. Therefore fix the comment.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The fec_mxc_init() function currently always returns 0. This does not
allow the callers to detect when for instance the PHY initialization
failed due to the port being unconnected. Fix that by returning the
status of fec_open().
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
wget followed by bootefi currently fails as follows:
U-Boot> wget 200000 192.168.0.30:helloworld.efi
Waiting for Ethernet connection... done.
HTTP/1.0 200 OK
Packets received 13, Transfer Successful
Bytes transferred = 12720 (31b0 hex)
U-Boot> bootefi 200000
No UEFI binary known at 200000
U-Boot>
Fix the problem by adding the missing efi_set_bootdev() call.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
FTGMAC100 enables drivers/net/ftgmac100.c which uses
PHY_INTERFACE_MODE_NCSI, which is defined only when PHY_NCSI is enabled.
Therefore FTGMAC100 depends on PHY_NCSI. However adding such a
dependency causes a "recursive dependency detected!" message, so
add a dependency on NET instead (PHY_NCSI depends on NET).
All in all, either the stack is NET and FTGMAC100 can be enabled,
or it is NET_LWIP (or NO_NET) and it cannot.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
PHY_NCSI enables drivers/net/phy/ncsi.c which calls net_loop() and
net_set_timeout_handler(). That's the legacy NET stack (as opposed to
NET_LWIP). Therefore add the dependency to Kconfig.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
wget_success() is used nowhere so remove it.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
dtsec_init_phy() is defined only with MII so add the proper conditional
in the caller code.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
emac.c implements cpu_eth_init() so it needs to pull the corresponding
header file.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The AT91-based platforms have a mem_init() function declared in
arch/arm/mach-at91/include/mach/at91_common.h and implemented in various
places. In preparation of the introduction of the lwIP networking library
which also has a global mem_init() function, rename the AT91 one to
at91_mem_init().
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heiko Schocher <hs@denx.de>
Reviewed-by: Hari Prasath Gujulan Elango <hari.prasathge@microchip.com>
Prefix the flash status codes (ERR_*) with FL_ in order to avoid clashes
with third-party libraries. Case in point: including the lwIP library
header file <lwip/err.h> which defines err_enum_t as an enum with values
being ERR_*.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
When building for sandbox, self.cross is empty.
In MakeEnvironment(), CROSS_COMPILE is defined to be self.cross (with
or without a full path), optionally prefixed by the toolchain wrapper
defined in ~/.buildman. This is fine when self.cross is not empty, but
it doesn't make sense when it is:
- Either there is no wrapper and we end up with an empty CROSS_COMPILE
which is the same as not defining it (the host compiler will be used),
- Or there is a wrapper and CROSS_COMPILE will contain only the wrapper
which obviously is not a valid compiler, hence an error.
Test case:
$ sudo apt install ccache
$ grep -q toolchain-wrapper ~/.buildman || \
printf "[toolchain-wrapper]\nwrapper = ccache\n" >>~/.buildman
$ make mrproper
$ ./tools/buildman/buildman sandbox_noinst
$ ./tools/buildman/buildman sandbox_noinst
Building current source for 1 boards (1 thread, 24 jobs per thread)
sandbox: + sandbox_noinst
+arch/sandbox/lib/reloc_sandbox_efi.c:10:15: error: operator '==' has no left operand
+ 10 | #if HOST_ARCH == HOST_ARCH_X86_64
+ | ^~
[...]
The GetEnvArgs function is modified too, since the VAR_CROSS_COMPILE
case has the same issue.
In tools/buildman/test.py, testGetEnvArgs is extended and
testMakeEnvironment is added. They check the 'arm' and 'sandbox'
toolchains, with and without a wrapper.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
When running the bootstage tests currently we get a warning like:
tests/test_bootstage.py::test_bootstage_stash
...PytestReturnNotNoneWarning: Expected None, but tests/test_bootstage.py::test_bootstage_stash returned (37748736, 4096), which will be an error in a future version of pytest. Did you mean to use `assert` in stead of `return`?
This is because the unstash test will run the stash test and fetch the
addr / size from that. Rework the test to be stash and unstash and then
run the unstash command at the end of the current stash test.
Acked-by: Michal Simek <michal.simek@amd.com>
Reviewed-by: Love Kumar <love.kumar@amd.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Make SPL_RAM_SUPPORT a hidden Kconfig symbol, automatically selected
by SPL_RAM_DEVICE or SPL_DFU. Avoids the situation where SPL_RAM_SUPPORT
may be enabled without the other two being enabled, which results in the
following build warning:
common/spl/spl_ram.c:19:14: warning: ‘spl_ram_load_read’ defined but not used [-Wunused-function]
19 | static ulong spl_ram_load_read(struct spl_load_info *load, ulong sector,
| ^~~~~~~~~~~~~~~~~
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
In lpddr4_start function error returned by lpddr4_enablepiinitiator
may go undetected due to overwrite of return code.
Add support to handle error in above case.
Reported-by: Andreas Dannenberg <dannenberg@ti.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
In case the cyclic framework is enabled, poll the card detect of already
initialized cards and deinitialize them in case they are removed. Since
the card initialization is a longer process and card initialization is
done on first access to an uninitialized card anyway, avoid initializing
newly detected uninitialized cards in the cyclic callback.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Documentation:
* Correct function descriptions that are not Sphinx conformant.
* Correct incorrect dependency CONFIG_USB_USB_GADGET in the ums command
description.
-----BEGIN PGP SIGNATURE-----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=aqv6
-----END PGP SIGNATURE-----
Merge tag 'doc-2024-10-rc6' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request doc-2024-10-rc6
Documentation:
* Correct function descriptions that are not Sphinx conformant.
* Correct incorrect dependency CONFIG_USB_USB_GADGET in the ums command
description.
Replace CONFIG_USB_USB_GADGET by CONFIG_USB_GADGET_DOWNLOAD.
Signed-off-by: Thomas Perrot <thomas.perrot@bootlin.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The function name in the description must match the function.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Correct the description of the select.id member to fix a kernel-doc
warning.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
* Add missing function names.
* Align names used in descriptions with function names.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The name used in the function description must match the function.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The Sphinx documentation build process cannot handle the interspersed
'private:' and 'public:' comments. Remove them.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
The function name must match the name used in the description.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
* The function name must be provided in the description.
* The function name must match the name used in the description.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
beagleboneai64 boot was broken after OF_UPSTREAM support for
J721E SOC.
So add bootph in chipid node similar to other boards of
this SOC.
Fixes: 46bb1405b461 ("arm: dts: k3-j721e: Move to OF_UPSTREAM")
Reported-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Added LMB API to prevent SF command from overwriting reserved
memory areas. The current SPI code does not use LMB APIs for
loading data into memory addresses. To resolve this, LMB APIs
were added to check the load address of an SF command and ensure it
does not overwrite reserved memory addresses. Similar checks are
used in TFTP, serial load, and boot code to prevent overwriting
reserved memory.
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
Suggested-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Use the lmb_read_check() function to verify if it is safe to use a
region of memory to load data from the wget command. The current logic
checks the amount of free memory available, starting from the 'load
address'. This call fails if the same region of memory has been used
earlier. This used to work earlier as the LMB memory map had a local
scope and was not persistent. Fix this issue by using the
lmb_read_check() call instead which only returns an error in case the
memory region has been marked for not allowing re-use.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Vaishnav Achath <vaishnav.a@ti.com>
Use the lmb_read_check() function to verify if it is safe to use a
region of memory to load data from a tftp command. The current logic
checks the amount of free memory available, starting from the 'load
address'. This call fails if the same region of memory has been used
earlier. This used to work earlier as the LMB memory map had a local
scope and was not persistent. Fix this issue by using the
lmb_read_check() call instead which only returns an error in case the
memory region has been marked for not allowing re-use.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Vaishnav Achath <vaishnav.a@ti.com>
Roger Quadros <rogerq@kernel.org> says:
TI upstream has moved from "mmio-mux" to "reg-mux" that doesn't
require the Mux device node's parent to be a syscon type.
Add support for "reg-mux" compatible.
use dev_dbg() instead of dev_info() for debug related
prints.
Get's rid of below print from console.
"cdns,sierra serdes@5030000: sierra probed"
Signed-off-by: Roger Quadros <rogerq@kernel.org>
With "reg-mux" compatible the driver no longer expects the parent
device to be a syscon type. It uses it's own regmux.
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Popup the bootmenu for 5 sec with default boot options to CC on AMD CCs and
default to SOM on others.
Users can anytime disable the bootmenu by setting the variable
enable_bootmenu=0 in zynqmp_kria.env or setup it up at run time and save
variables to NV memory.
The patch is also fixing issue created by commit 4c7363068651 ("cmd:
setexpr: fix no matching string in gsub return empty value") which has
changed return value from setexpr command (Before this commit when
matching string wasn't found command return 1 that's why was possible to
use with if).
Signed-off-by: John Vicky Vykuntapu <johnvicky.vykuntapu@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/6193d95a9c0f3ae319a900b46d6212f7ab16aba4.1726041851.git.michal.simek@amd.com
fixed-clock can't be described on the bus because it is missing reg
property. Also remove additional compatible string for flash. Mini qspi
configuration is used with multiple different flashes that's why describing
only one is not correct but also not required based on DT schema.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/0e4721eda8d0f23a9d9f0c15cf887f0bba639cd4.1726219714.git.michal.simek@amd.com
amba is not approved node name for simple-bus that's why use axi instead to
be aligned with other xilinx boards. Node reference is not changed that's
why there is no impact but also mini configuration will never gets to OS
that's why nothing should be affected from OS perspective (paths in /proc/
for example).
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/1b18a69ae47bdcb1a0795af7621d13bfecfc9861.1726219714.git.michal.simek@amd.com
U-Boot is not picking boot.scr script address from device tree
rather it's using default address for Microblaze platform,
and it's picking for other platforms. Remove conditional check
for Microblaze platform, so that u-boot pick up boot.scr script
address for all platforms from device tree.
Signed-off-by: Padmarao Begari <padmarao.begari@amd.com>
Link: https://lore.kernel.org/r/20240913093231.2343528-1-padmarao.begari@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
There are lot of device_is_compatible() present in the driver.
Remove them and replace with a variables "SDHCI_COMPATIBLE_SDHCI_89A"
and "SDHCI_COMPATIBLE_VERSAL_NET_EMMC" with match data.
This change saves the space and reduce the execution time.
Signed-off-by: Padmarao Begari <padmarao.begari@amd.com>
Link: https://lore.kernel.org/r/20240913093157.2343476-1-padmarao.begari@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Generic understanding/consideration is that phy-mode as sgmi means that the
internal PCS(Physical Coding Sublayer) should be enabled by default.
Xilinx GEM implementation allows configuration GEM (gmii mode) + PL PCS PMA
(sgmii mode, Physical Medum Attachment) but in this case phy-mode should be
setup as gmii.
The reason for this assumption is that phy-mode should be described based
on GEM configuration not based on mode coming out of PHY.
Also Linux kernel automatically setting up PCSSEL bit when phy mode is
sgmii without a need to specified additional DT propety.
All our DTSes with sgmii phy mode have this flag enabled that's why there
is no need/reason to just duplicate information.
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/2ecdbcc4ce692e2f8b3e7054a2abab35f6c03a69.1726213052.git.michal.simek@amd.com
Remove device tree overlay (DTBO) entries for the ZynqMP target
from the Makefile. Add new device tree binaries (DTBs) for the
zynqmp-sm-k24-revA and zynqmp-smk-k24-revA configurations.
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/20240906070808.1045991-3-prasad.kummari@amd.com
