Add symlinks for both tiboot3.bin and tispl.bin because a user has to
anyway rename these files to get the platform to boot up.
This just makes it more intuitive and convenient.
Reviewed-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
The Kernel Image and DTB files are supposed to be picked from the rootfs
of the SD Card, this fails in legacy boot flow because bootpart is set
to 1:1. Fix it.
Fixes: a200f428b5b21 ("board: ti: am62x: Add am62x_beagleplay_* defconfigs and env file")
Reviewed-by: Nishanth Menon <nm@ti.com>
Acked-by: Chirag Shilwant <c-shilwant@ti.com>
Signed-off-by: Dhruva Gole <d-gole@ti.com>
MCU_CLKOUT0 output can be driven by two different clock inputs:
one at 25 MHz and another at 50 MHz. Currently, the 25 MHz input
clock is not selectable due to a duplication of the 50 MHz clock input
in the mux configuration. This commit corrects the parent clock mux
configuration, making the 25 MHz input clock selectable.
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Tom Rini <trini@konsulko.com> says:
This fixes a number of small issues with the structure of the Azure jobs
and then ensures that we will build all of the possible boards that we
know about, in this CI run.
Now that we have each stage of the world build using variables to define
what it will attempt to build, and that we have added in missing
machines, add a job to make sure that we would always be building
everything.
Signed-off-by: Tom Rini <trini@konsulko.com>
As part of commit 9aeac898da66 ("Azure: Rework build the world jobs") I
made a few mistakes. An errant '_' meant that we built neither at91 nor
kirkwood platforms. Further, the non-freescale (NXP) "LS1xxx" platforms
were also not being built. Adjust some jobs to have these be built
again.
Fixes: 9aeac898da66 ("Azure: Rework build the world jobs")
Signed-off-by: Tom Rini <trini@konsulko.com>
In order to get the list of boards that will be done in a "dry run"
build we need to have something listed and not just an exclude list.
Populate the job with all architecture directories except arm and
powerpc.
Signed-off-by: Tom Rini <trini@konsulko.com>
Instead of defining BUILDMAN to the value we'll build in each part of
the matrix job, define a variable with that name and have it list what
to build. This will allow us to reference these multiple times
consistently later on.
Signed-off-by: Tom Rini <trini@konsulko.com>
At this point noting that we have a split in our job similar to TravisCI
(which we have not used in years) isn't helpful, and is also not true
anymore either. Instead, explain that we split the world up in to 10
jobs as that's the maximum we can have going in parallel on the free
tier of Azure.
Signed-off-by: Tom Rini <trini@konsulko.com>
Caleb Connolly <caleb.connolly@linaro.org> says:
MMU issues are some of the most frustrating to debug. To make this
slightly less unbearable, introduce a software pagetable walker for
ARMv8. This can be called to dump a pagetable with the default
formatter, or a custom callback can be provided to implement more
complicated parsing.
This can also be useful to dump the pagetable used by a previous
bootloader stage (by reading out the ttbr register).
Here is an example of the output when walking U-Boot's own memory map
on a Qualcomm RB3 board:
Walking pagetable at 000000017df90000, va_bits: 36. Using 3 levels
[0x17df91000] | Table | |
[0x17df92000] | Table | |
[0x000001000 - 0x000200000] | Pages | Device-nGnRnE | Non-shareable
[0x000200000 - 0x040000000] | Block | Device-nGnRnE | Non-shareable
[0x040000000 - 0x080000000] | Block | Device-nGnRnE | Non-shareable
[0x080000000 - 0x140000000] | Block | Normal | Inner-shareable
[0x17df93000] | Table | |
[0x140000000 - 0x17de00000] | Block | Normal | Inner-shareable
[0x17df94000] | Table | |
[0x17de00000 - 0x17dfa0000] | Pages | Normal | Inner-shareable
This should use the driver macros so that the driver appears in the
linker list. Fix this.
Fixes: 8587839f19d ("pinctrl: meson: add axg support")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20240623203033.1566505-8-sjg@chromium.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add some brief documentation on using dump_pagetables() to print out
U-Boot's pagetables during boot.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Add a basic software implementation of the ARM64 pagetable walker. This
can be used for debugging U-Boot's pagetable, as well as dumping the
pagetable from the previous bootloader stage if it used one (by reading
out the ttbr address).
One can either call dump_pagetable() to print the pagetable to the
console with the default formatter, or implement their own pagetable
handler using walke_pagetable() with a custom pte_walker_cb_t callback.
All of the added code is discarded when unused, hence there is no need
to add an additional Kconfig option for this.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
The APTable attribute is two bits wide according to the ARMv8-A
architecture reference manual. Fix the macro accordingly.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Implement set_mode callback by calling the current public
function, use a temporary function name that will be removed
when the public phy_meson_gxl_usb2_set_mode is finally removed
in a following change.
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://lore.kernel.org/r/20240620-u-boot-usb-gxl-phy-set-mode-v2-1-b81c027bc02c@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Unfortunately when enabling FDT fixups for the AM62x family of SoCs and
moving TF-A to the bottom of RAM we missed the BeaglePlay. This is
causing Linux's memory allocator to clobber TF-A and break its boot.
Enable OF_SYSTEM_SETUP to fixup the kernel's FDT to inform it of the
actual location of the firmware
CC: Andrew Davis <afd@ti.com>
CC: Nishanth Menon <nm@ti.com>
CC: Robert Nelson <robertcnelson@gmail.com>
Reported-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Bryan Brattlof <bb@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
Tested-by: Robert Nelson <robertcnelson@gmail.com>
Reviewed-by: Nishanth Menon <nm@ti.com>
Acked-by: Chirag Shilwant <c-shilwant@ti.com>
Tested-by: Dhruva Gole <d-gole@ti.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/21310
- Enable SPL DTO application support for i.MX8MP DHCOM PDK2.
- Migrate imx8mn_bsh_smm_s2 and imx6ulz_bsh_smm_m2 to OF_UPSTREAM.
- Drop redundant imports with dts/upstream.
- Miscellaneous improvements for Gateworks i.MX8M boards.
Enable Quality of Service (QoS) blocks for Display SubSystem (DSS), by
servicing the DSS - DDR traffic from the Real-Time (RT) queue. This is
done by setting the DSS DMA orderID to greater than 9.
Before setting up the QoS, the ORDERID needs to be mapped to VBUSM sources
using setup_navss_nb() function call that sets the threadmap for NBSS
registers. (Section 10.2.9.2.10 "Quality of Service" in TRM[0])
Section 3.2.1 "Quality of Service (QoS)" in the TRM[0] provide more
details.
[0]: https://www.ti.com/lit/zip/spruj52
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Enable Quality of Service (QoS) blocks for Display SubSystem (DSS), by
servicing the DSS - DDR traffic from the Real-Time (RT) queue. This is
done by setting the DSS DMA orderID to greater than 9.
Before setting up the QoS, the ORDERID needs to be mapped to VBUSM sources
using setup_navss_nb() function call that sets the threadmap for NBSS
registers. (Section 10.2.9.2.10 "Quality of Service" in TRM[0])
Section 3.2.1 "Quality of Service (QoS)" in the TRM[0] provide more
details.
[0]: https://www.ti.com/lit/zip/spruj28
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Enable Quality of Service (QoS) blocks for Display SubSystem (DSS), by
servicing the DSS - DDR traffic from the Real-Time (RT) queue. This is
done by setting the DSS DMA orderID to greater than 7.
Before setting up the QoS, the ORDERID needs to be mapped to VBUSM sources
using setup_navss_nb() function call that sets the threadmap for NBSS
registers. (Section 10.2.10.1.2 "NB Parameters" in TRM[0])
Section 3.3.2 "Quality of Service (QoS)" in the TRM[0] provide more
details.
[0]: https://www.ti.com/lit/zip/spruil1
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Andrew Davis <afd@ti.com>
For the QOS registers, instead of using the raw values for calculation
for each reg field, use a defined macro which takes in argument for all
the reg fields to get the desired value.
Do the similar simplification for QOS register and group registers and
make the corresponding changes for am62a_qos_uboot file.
Suggested-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
Acked-by: Andrew Davis <afd@ti.com>
QoS bit mapping are common across all K3 SoCs so move those defines
to common header file (k3_qos.h).
This ensures that we do not define these for each SoC.
Signed-off-by: Jayesh Choudhary <j-choudhary@ti.com>
general use some prototypes changed from returning efi_status_t to int,
which is more appropriate for the non-EFI APIs. However, some of the
EFI callsites never changed and we ended up assigning the int value to
efi_status_t.
This is unlikely to cause any problems, apart from returning invalid
values on failures and violating the EFI spec.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEgWII69YpahbL5iK5gS8AYozs+qIFAmZ5KfMACgkQgS8AYozs
+qKF3g/9H9NzjgCJ/b+/Xqe2UCyUsJxBUS88SrkPXg6OjZ2eybhs9Hzaym6qKMzg
Hr1kWgVXrvB1Bt15FBDWfO9yhc21u7JLH5B6jzk0bnxqgVUUEuEv+q9GpnQIvVLm
znKKFUtMnNqUo8XD/iBnRPu+3tFYjuND3Fmw//DSOAWqoaRnvLyc8JT8c0VcQbN2
zgI815hLqOY430s28GBz4vXNkLaOqiE9PGoJwJgpUNIrLrYtKrtk6PciI5/8CQR2
5kJwcIWjduS7bTTmcYIY1bmL88aDIf1p1Vl8mdX7Sbs0PxFIs0jp7ZgTsA6xPcdC
ZQLDjQYJgdZZWHbYAn5tlpTCDkywmVc5+YHmP3CqY7P9hjVQNpvQKBWYvkX3X0e5
exboli12/NZCuZQOLhMibkM9N59cIma7duJDKRMioRPii9hVp47am7IJWMgGxD2u
5IPGz24QU2sIVI9ppbKd0bhRk3qC85b0zfHJbXs/27aHLlQ+xQxo39tDct4flwwJ
hT+c89bybLzjazcQfF4Kd/O05T5VQNJDC39uX8BGGIZ0Hkbwor3TjGlEgNkoRru8
JIUldwgkOmxgr/+KUy8F5GBR3AQ5vMahsBhvQFgZnWK+tfSGJd17b+yiuFXYlPCm
7D9tOsateJ5aFvVUN8GZHi/q5ohON9PDU5gS7m97yjosfOcA7ME=
=8dOE
-----END PGP SIGNATURE-----
Merge tag 'tpm-master-24062024' of https://source.denx.de/u-boot/custodians/u-boot-tpm
When the EFI TCG measurement code moved from EFI to the TPM subsystem for
general use some prototypes changed from returning efi_status_t to int,
which is more appropriate for the non-EFI APIs. However, some of the
EFI callsites never changed and we ended up assigning the int value to
efi_status_t.
This is unlikely to cause any problems, apart from returning invalid
values on failures and violating the EFI spec.
Enable SPL DTO support to apply matching SoM specific DTOs to cater
for the SoM differences in DH i.MX8MP DHCOM PDK2 configuration. This
is already enabled in DH i.MX8MP DHCOM PDK3 configuration so align
the two configurations.
Fixes: ad1158c50e0e ("arm64: dts: imx8mp: Switch to DT overlays for i.MX8MP DHCOM SoM")
Signed-off-by: Marek Vasut <marex@denx.de>
With DM enabled, there is no need for board code to initialize
the Ethernet interfaces.
Specifically board_interface_eth_init will handle the configuration of
GPR1.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
The assigned-clock no longer have to be dropped, the clock are now
defined in clk-imx8mp.c and used by DWMAC driver to configure the
DWMAC clock. Drop the workarounds from U-Boot specific DT extras.
Having the clocks dropped causes the EQoS to be non-functional.
See commit c7ea9612df0f ("arm64: dts: imx8mp: Drop EQoS clock
workaround").
Fixes: 48c6f9777cee ("board: gateworks: venice: add imx8mp-gw7905-2x support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
The GW74xx USB1 controller connects to a dual-role connector using a GPIO
for role detection via the usb-connector Linux driver (usb-conn-gpio.c).
This drive does not exist yet in U-Boot so for now we will just default
USB1 to host mode.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Due to supply chain issues Venice boards use either a DP83867 or a
GPY111 RGMII PHY. We already print an identifier for the DP83867 so add
one for the GPY111 to better identify what PHY is on a board:
Example:
Net: GPY111 eth0: ethernet@30be0000 [PRIME]
Net: DP83867 eth0: ethernet@30be0000 [PRIME]
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Extensive testing has shown that at higher temperatures operating
without a GSC backup battery, the GSC needs a small delay after
releasing the I2C SDA/SCL pins before it is ready to handle I2C
requests.
Add a delay to avoid errors such as:
wait_for_sr_state: Arbitration lost sr=93 cr=80 state=2020
i2c_init_transfer: failed for chip 0x20 retry=0
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
The Gateworks System Controller (GSC) has a voltage supervisor which is
disabled by default. On older boards we want to maintian this but on
newer boards we wish to enable the voltage supervisor.
The Gateworks System Controller (GSC) can disable the board primary
power supply by driving a pin to a FET high. On older board models
the leakage of the GSC may exceed the leakage of the FET causing this
signal slowly rise when the GSC battery is low and the board is in a
powered down state resulting in the board being kept in a disabled
state.
Newer boards have a hardware fix to avoid this leakage and thus should
enable the voltage supervisor.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Drop redundant header imports with dts/upstream already providing
updated headers which have been checked to be backwards compatibility.
The imx headers which aren't present in dts/upstream are as follows:
- include/dt-bindings/clock/imxrt1020-clock.h
- include/dt-bindings/clock/imx8qm-clock.h
- include/dt-bindings/clock/imxrt1170-clock.h
- include/dt-bindings/clock/imx8qxp-clock.h
- include/dt-bindings/memory/imxrt-sdram.h
- include/dt-bindings/pinctrl/pads-imx8qxp.h
- include/dt-bindings/pinctrl/pads-imx8qm.h
- include/dt-bindings/soc/imx8_pd.h
- include/dt-bindings/soc/imx_rsrc.h
hence these aren't dropped yet but there was an unused header:
- include/dt-bindings/pinctrl/pins-imx8mq.h
which has been dropped as well. There shouldn't be any funtional impact
with this change but it rather allows iMX platforms to use upstream
dt-bindings headers in a backwards compatible manner.
Signed-off-by: Sumit Garg <sumit.garg@linaro.org>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Migrate imx8mn_bsh_smm_s2 and imx8mn_bsh_smm_s2pro boards to OF_UPSTREAM.
Signed-off-by: Patrick Barsanti <patrick.barsanti@amarulasolutions.com>
Tested-by: Michael Trimarchi <michael@amarulasolutions.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
A while back we moved the core functions of the EFI TCG protocol to the
TPM APIs in order for them to be used with bootm, booti etc.
Some prototypes changed from returning efi_status_t to int, which is more
appropriate for the non-EFI APIs. However, some of the EFI callsites never
changed and we ended up assigning the int value to efi_status_t.
This is unlikely to cause any problems, apart from returning invalid
values on failures and violating the EFI spec. Let's fix them
by looking at the new return code and map it to the proper EFI return
code on failures.
Fixes: commit 97707f12fdab ("tpm: Support boot measurements")
Fixes: commit d6b55a420cfc ("efi_loader: startup the tpm device when installing the protocol")
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
We currently return 'No space left on device' if the eventlong buffer
we allocated is not enough. On a similar check later on that function
during the call to tcg2_log_init() we return 'No buffer space
available'. So switch both error codes to -ENOBUFS since we are always
checking a buffer and not a device.
Fixes: commit 97707f12fdab ("tpm: Support boot measurements")
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Documentation:
* Fix broken references to pytest suite and test writing
* Fix links to FIT documentation
* Add capsule documentation for TI K3 devices
-----BEGIN PGP SIGNATURE-----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=/t/C
-----END PGP SIGNATURE-----
Merge tag 'doc-2024-07-rc5-2' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request doc-2024-07-rc5-2
Documentation:
* Fix broken references to pytest suite and test writing
* Fix links to FIT documentation
* Add capsule documentation for TI K3 devices
Added introductory documentation about capsule support for TI devices,
including links to more detailed information.
Also added a note in the build secction that points to the host package
dependency docs.
This patch is followup from a request in the series introducing capsule
update for TI boards.
https://lore.kernel.org/r/20240618145058.552eapp5iiz772ej@hardcore
Signed-off-by: Jonathan Humphreys <j-humphreys@ti.com>
Add missing colon in :doc: link.
Fixes: fc3283314539 ("doc: Explain briefly how to write new tests")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This should have been adapted directly with or after
v2021.01-693-gca6583d4e08 ("doc: move test/README to HTML
documentation") or v2021.01-694-g0157619d5c8 ("doc: move
test/py/README.md to HTML documentation") already.
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
