With CONFIG_DM_USB, there is no longer the need for any USB board code
anymore.
Remove the unneeded USB board code.
While at it, also remove the uneeeded CONFIG_USB_MAX_CONTROLLER_COUNT
option.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Update simple-framebuffer device-tree node by enumerating framebuffer
related information in existing simple-framebuffer node in Linux
device-tree file and enabling it.
In case there is no simple-framebuffer stub detected in Linux kernel
device-tree and video is still active, then update the device-tree to
reserve the framebuffer region for the active splash screen.
This helps preserve the splash screen till the display server takes over
after OS is booted.
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/22796
- Switch to using upstream DT on DH i.MX8MP DHCOM PDK2/PDK3.
- Add ability to build fallback DTBOs from arch/$(ARCH)/dts.
- Remove fdt_high and initrd_high env variables from imx6-dhcom.
- Add dummy clk for imx8.
- Fix DT corruption in imx8_cpu.
- Improve DDR stability on pico-imx7d.
Increase ODT resistor value from 60 to 120 ohm to improve DRAM stability.
Based on the following commit from TechNexion U-Boot:
8a00e57b69
Signed-off-by: Ray Chang <ray.chang@technexion.com>
Signed-off-by: Benjamin Szőke <egyszeregy@freemail.hu>
- stm32mp: Add script to install U-Boot from SD/eMMC to SPI NOR on DH STM32MP15xx
- stm32mp: Switch to using upstream DT on DH STM32 DHSOM
- stm32mp: Generate u-boot.itb using binman on DH STM32 DHSOM
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEE56Yx6b9SnloYCWtD4rK92eCqk3UFAmcQ1JUACgkQ4rK92eCq
k3W+xQf+K0oBb8yTpVKSXW8quotu6r8XwrzvcWOpZVIIGpPpFoRa61feNcI5+Zrl
lvD3rBrD31PvvHC1wWPRsN3c+oJlnq7GQDPChix54rclgGJNd04zCnJ9QaST309F
yqr7w6Cx/AL6Fbcvxbv8FvQxyjgGrbchbJ4sHeD9AYABhV3Z0DuBaUttZorG6ZIO
23pxvK9X/dUJGmbmvKkMID3Ifxzum3HEaPf7n3HkFg1/bzICXSSjRUEAFBLWlQp5
7oiWLvHZDIefpC8zupewXYvRscsG9HOjSWhRUc8+zu4rK1bele/v4nig46nfrRSN
3RpimkKVvnJ2svV1cCLS2Mhq2V6SlQ==
=XS+7
-----END PGP SIGNATURE-----
Merge tag 'u-boot-stm32-20241017' of https://source.denx.de/u-boot/custodians/u-boot-stm
CI: https://source.denx.de/u-boot/custodians/u-boot-stm/-/pipelines/22732
- stm32mp: fix boot issue with OP-TEE
- stm32mp: Add script to install U-Boot from SD/eMMC to SPI NOR on DH STM32MP15xx
- stm32mp: Switch to using upstream DT on DH STM32 DHSOM
- stm32mp: Generate u-boot.itb using binman on DH STM32 DHSOM
Since older U-Boot releases do not negotiate USB PD, the kernel
DT may not enable the USB-C controller by default to avoid a
regression. The plan is to upstream it with 'status = "fail";'
instead. U-Boot should then mark it as 'status = "okay";' if
it negotiated USB PD. Currently existing upstream kernel DTs do
not yet have the USB-C controller at all, so we ignore any
failures.
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tested-by: Soeren Moch <smoch@web.de>
Tested-by: Anand Moon <linux.amoon@gmail.com>
Reviewed-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Describe the u-boot.its generation in stm32mp15xx-dhsom-u-boot.dtsi
binman {} DT node as a replacement for current CONFIG_SPL_FIT_SOURCE
use, dispose of both u-boot-dhcom.its and u-boot-dhcor.its.
Use fdt-SEQ/config-SEQ to generate a list of fdt-N fitImage images {} and
matching configuration {} node entries. The configuration node entry names
no longer encode _somrevN_boardrevN suffix, which was never really used, so
drop this functionality by default. Rework board_fit_config_name_match() to
match on the new configuration node entry names.
Users who do need the match on _somrevN_boardrevN can either replace the
fdt-SEQ/config-SEQ with fixed fdt-N/config-N nodes which each encode the
matching 'description = "NAME_somrevN_boardrevN"' to restore the old
behavior verbatim, or better use SPL DT overlays for U-Boot control DT
the same way e.g. i.MX8MP DHCOM does to support multiple SoM and board
variants.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Enable OF_UPSTREAM to use upstream DT and add st/ prefix to the
DEFAULT_DEVICE_TREE. And thereby directly build DTB from dts/upstream/src/
including *-u-boot.dtsi from arch/$(ARCH)/dts/ directory.
The previous setup used generic SoC prefix like stm32mp15xx-dhco* for
generic DTs which could be used on any STM32MP15xx DHSOM variant. The
new setup uses specific SoC prefix stm32mp157c-dhco* to match Linux DT
names. Since the hardware present on STM32MP153 and STM32MP157 is not
enabled in the board configuration and not supported by U-Boot except
for the DSI host, using the existing Linux DTs poses no issue even on
plain STM32MP151A based SoMs.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Update the MAINTAINERS file glob to cover all of STM32MP DHSOM related files.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Add what it takes to enable NETDEVICES with NET_LWIP and enable DHCP as
well as the dhcp command. CMD_TFTPBOOT is selected by BOOTMETH_EFI due
to this code having an implicit dependency on do_tftpb().
Note that PXE is likely non-fonctional with NET_LWIP (or at least not
100% functional) because DHCP option 209 is not supported by the lwIP
library. Therefore, BOOTP_PXE_DHCP_OPTION cannot be enabled.
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Raymond Mao <raymond.mao@linaro.org> says:
Integrate MbedTLS v3.6 LTS (currently v3.6.0) with U-Boot.
Motivations:
------------
1. MbedTLS is well maintained with LTS versions.
2. LWIP is integrated with MbedTLS and easily to enable HTTPS.
3. MbedTLS recently switched license back to GPLv2.
Prerequisite:
-------------
This patch series requires mbedtls git repo to be added as a
subtree to the main U-Boot repo via:
$ git subtree add --prefix lib/mbedtls/external/mbedtls \
https://github.com/Mbed-TLS/mbedtls.git \
v3.6.0 --squash
Moreover, due to the Windows-style files from mbedtls git repo,
we need to convert the CRLF endings to LF and do a commit manually:
$ git add --renormalize .
$ git commit
New Kconfig options:
--------------------
`MBEDTLS_LIB` is for MbedTLS general switch.
`MBEDTLS_LIB_CRYPTO` is for replacing original digest and crypto libs with
MbedTLS.
`MBEDTLS_LIB_CRYPTO_ALT` is for using original U-Boot crypto libs as
MbedTLS crypto alternatives.
`MBEDTLS_LIB_X509` is for replacing original X509, PKCS7, MSCode, ASN1,
and Pubkey parser with MbedTLS.
By default `MBEDTLS_LIB_CRYPTO_ALT` and `MBEDTLS_LIB_X509` are selected
when `MBEDTLS_LIB` is enabled.
`LEGACY_CRYPTO` is introduced as a main switch for legacy crypto library.
`LEGACY_CRYPTO_BASIC` is for the basic crypto functionalities and
`LEGACY_CRYPTO_CERT` is for the certificate related functionalities.
For each of the algorithm, a pair of `<alg>_LEGACY` and `<alg>_MBEDTLS`
Kconfig options are introduced. Meanwhile, `SPL_` Kconfig options are
introduced.
In this patch set, MBEDTLS_LIB, MBEDTLS_LIB_CRYPTO and MBEDTLS_LIB_X509
are by default enabled in qemu_arm64_defconfig and sandbox_defconfig
for testing purpose.
Patches for external MbedTLS project:
-------------------------------------
Since U-Boot uses Microsoft Authentication Code to verify PE/COFFs
executables which is not supported by MbedTLS at the moment,
addtional patches for MbedTLS are created to adapt with the EFI loader:
1. Decoding of Microsoft Authentication Code.
2. Decoding of PKCS#9 Authenticate Attributes.
3. Extending MbedTLS PKCS#7 lib to support multiple signer's certificates.
4. MbedTLS native test suites for PKCS#7 signer's info.
All above 4 patches (tagged with `mbedtls/external`) are submitted to
MbedTLS project and being reviewed, eventually they should be part of
MbedTLS LTS release.
But before that, please merge them into U-Boot, otherwise the building
will be broken when MBEDTLS_LIB_X509 is enabled.
See below PR link for the reference:
https://github.com/Mbed-TLS/mbedtls/pull/9001
Miscellaneous:
--------------
Optimized MbedTLS library size by tailoring the config file
and disabling all unnecessary features for EFI loader.
From v2, original libs (rsa, asn1_decoder, rsa_helper, md5, sha1, sha256,
sha512) are completely replaced when MbedTLS is enabled.
From v3, the size-growth is slightly reduced by refactoring Hash functions.
From v6, smaller implementations for SHA256 and SHA512 are enabled and
target size reduce significantly.
Target(QEMU arm64) size-growth when enabling MbedTLS:
v1: 6.03%
v2: 4.66%
v3 - v5: 4.55%
v6: 2.90%
Tests done:
-----------
EFI Secure Boot test (EFI variables loading and verifying, EFI signed image
verifying and booting) via U-Boot console.
EFI Secure Boot and Capsule sandbox test passed.
Known issues:
-------------
None.
Link: https://lore.kernel.org/u-boot/20241003215112.3103601-1-raymond.mao@linaro.org/
We don't need an API specially for non-watchdog since sha1_csum_wd
supports it by disabling CONFIG_HW_WATCHDOG and CONFIG_WATCHDOG.
Set 0x10000 as default chunk size for SHA1.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
We don't need an API specially for non-watchdog since md5_wd supports
it by disabling CONFIG_HW_WATCHDOG and CONFIG_WATCHDOG.
Set 0x10000 as default chunk size for MD5.
Signed-off-by: Raymond Mao <raymond.mao@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Michal Simek <michal.simek@amd.com>
- Add new Boards:
- Libre Computer aml-s905d3-cc
- Libre Computer aml-a311d-cc
- Add capsule update to libretech-ac and the new boards since they have an onboard SPI nor flash
- Fix HDMI support after sync to v6.11 and regulator enable from Marek
- Fix khadas-vim3 android config for android-mainline kernel
- Disable meson64 boot targets when configs are not eavailable
-----BEGIN PGP SIGNATURE-----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=oq4w
-----END PGP SIGNATURE-----
Merge tag 'u-boot-amlogic-next-20241014' of https://source.denx.de/u-boot/custodians/u-boot-amlogic
- Add Libre Computer boards into proper libre-computer board directory
- Add new Boards:
- Libre Computer aml-s905d3-cc
- Libre Computer aml-a311d-cc
- Add capsule update to libretech-ac and the new boards since they have an onboard SPI nor flash
- Fix HDMI support after sync to v6.11 and regulator enable from Marek
- Fix khadas-vim3 android config for android-mainline kernel
- Disable meson64 boot targets when configs are not eavailable
Add support for the Libre Computer aml-s905d3-cc "Solitude" board:
https://libre.computer/products/aml-s905d3-cc/
The Solitude board has a Credit Card form factor, similar to the
the previous "Le Potato" card, but with the Amlogic A311D SoC,
MIPI DSI and CSI connectors. PoE header and a single USB2 Type-C
connector replacing the microUSB one for power and USB 2.0.
The board has an embedded SPI NOR flash, and EFI Capsule support
is added.
The GUID is dynamically generated for the board, to get it:
=> efidebug capsule esrt
========================================
ESRT: fw_resource_count=1
ESRT: fw_resource_count_max=1
ESRT: fw_resource_version=1
[entry 0]==============================
ESRT: fw_class=4302C3CB-2502-5EFE-87E0-894A8A322893
ESRT: fw_type=unknown
ESRT: fw_version=0
ESRT: lowest_supported_fw_version=0
ESRT: capsule_flags=0
ESRT: last_attempt_version=0
ESRT: last_attempt_status=success
========================================
On the host (with the aml_encrypt_g12a result binary):
$ eficapsule --guid 4302C3CB-2502-5EFE-87E0-894A8A322893 -i 1 u-boot.bin u-boot.cap
On the board (from USB disk containing u-boot.cap at root):
=> load usb 0:1 $kernel_addr_r u-boot.cap
=> efidebug capsule update $kernel_addr_r
The binary will then be flashed on the SPI.
Link: https://lore.kernel.org/r/20240920-u-boot-topic-libre-computer-solitude-alta-v1-2-8915b108840b@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Add support for the Libre Computer aml-a311d-cc "Alta" board:
https://libre.computer/products/aml-a311d-cc/
The Alta board has a Credit Card form factor, similar to the
the prvevious "Le Potato" card, but with the Amlogic A311D SoC,
MIPI DSI and CSI connectors. PoE header and a single USB2 Type-C
connector replacing the microUSB one for power and USB 2.0.
The board has an embedded SPI NOR flash, and EFI Capsule support
is added.
The GUID is dynamically generated for the board, to get it:
=> efidebug capsule esrt
========================================
ESRT: fw_resource_count=1
ESRT: fw_resource_count_max=1
ESRT: fw_resource_version=1
[entry 0]==============================
ESRT: fw_class=17E07D9D-4D91-53F4-8780-1D91F279C1A5
ESRT: fw_type=unknown
ESRT: fw_version=0
ESRT: lowest_supported_fw_version=0
ESRT: capsule_flags=0
ESRT: last_attempt_version=0
ESRT: last_attempt_status=success
========================================
On the host (with the aml_encrypt_g12a result binary):
$ eficapsule --guid 17E07D9D-4D91-53F4-8780-1D91F279C1A5 -i 1 u-boot.bin u-boot.cap
On the board (from USB disk containing u-boot.cap at root):
=> load usb 0:1 $kernel_addr_r u-boot.cap
=> efidebug capsule update $kernel_addr_r
The binary will then be flashed on the SPI.
Link: https://lore.kernel.org/r/20240920-u-boot-topic-libre-computer-solitude-alta-v1-1-8915b108840b@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Since the aml-s805-cc works well using EFI, and now the capsule updates
backend has been merged, let's enable the missing configs and add
the required structures to support it.
The GUID is dynamically generated for the board, to get it:
=> efidebug capsule esrt
========================================
ESRT: fw_resource_count=1
ESRT: fw_resource_count_max=1
ESRT: fw_resource_version=1
[entry 0]==============================
ESRT: fw_class=B8079027-9B2C-57D4-86AA-CC782ADA598C
ESRT: fw_type=unknown
ESRT: fw_version=0
ESRT: lowest_supported_fw_version=0
ESRT: capsule_flags=0
ESRT: last_attempt_version=0
ESRT: last_attempt_status=success
========================================
On the host (with the aml_encrypt_gxl result binary):
$ eficapsule --guid B8079027-9B2C-57D4-86AA-CC782ADA598C -i 1 u-boot.bin u-boot.cap
On the board (from USB disk containing u-boot.cap at root):
=> load usb 0:1 $kernel_addr_r u-boot.cap
=> efidebug capsule update $kernel_addr_r
The binary will then be flashed on the SPI.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Link: https://lore.kernel.org/r/20240917-u-boot-topic-dynamic-uuid-v2-2-416e39c6e271@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
The libretech-ac aka aml-s805x-ac supports mainline U-boot
from a dedicated SPI flash, move the board support into
a dedicated vendor/board subdirectory in order to support
vendor specific customization.
It also aligns with the vendor downstream changes.
Link: https://lore.kernel.org/r/20240917-u-boot-topic-dynamic-uuid-v2-1-416e39c6e271@linaro.org
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
This switches all boards with the Allwinner H616/H618/H313/H700 SoCs over to
use OF_UPSTREAM. We are doing it for this SoC family only since the DTs
between the U-Boot and the kernel repo are exactly identical, whereas other
families have one compatibility fix in U-Boot to allow booting older kernels.
Other will follow if this plays out well.
The biggest chunk otherwise is adding support for an Anbernic game console,
using the H700 SoC. For that we need to enhance the DRAM support code, and
pick two DT commits from the mainline kernel/DT rebasing repo, followed
by the defconfig patch.
On top of that two small fixes for the old Allwinner A80.
Gitlab CI passed, and I booted that briefly on some boards, including an
H616 and an H618 one (with LPDDR4).
Assorted Tegra enhancements. Merged with the recent XPL_BUILD changes,
resolve some whitespace issues and fix the name of the new apalis-tk1
env file by Tom.
Signed-off-by: Tom Rini <trini@konsulko.com>
Convert boards to use text based env. This is the first stage of
conversion, common inclusions should be converted next.
Acked-by: Francesco Dolcini <francesco.dolcini@toradex.com> # Toradex Apalis TK1
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Simon Glass <sjg@chromium.org> says:
When the SPL build-phase was first created it was designed to solve a
particular problem (the need to init SDRAM so that U-Boot proper could
be loaded). It has since expanded to become an important part of U-Boot,
with three phases now present: TPL, VPL and SPL
Due to this history, the term 'SPL' is used to mean both a particular
phase (the one before U-Boot proper) and all the non-proper phases.
This has become confusing.
For a similar reason CONFIG_SPL_BUILD is set to 'y' for all 'SPL'
phases, not just SPL. So code which can only be compiled for actual SPL,
for example, must use something like this:
#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_TPL_BUILD)
In Makefiles we have similar issues. SPL_ has been used as a variable
which expands to either SPL_ or nothing, to chose between options like
CONFIG_BLK and CONFIG_SPL_BLK. When TPL appeared, a new SPL_TPL variable
was created which expanded to 'SPL_', 'TPL_' or nothing. Later it was
updated to support 'VPL_' as well.
This series starts a change in terminology and usage to resolve the
above issues:
- The word 'xPL' is used instead of 'SPL' to mean a non-proper build
- A new CONFIG_XPL_BUILD define indicates that the current build is an
'xPL' build
- The existing CONFIG_SPL_BUILD is changed to mean SPL; it is not now
defined for TPL and VPL phases
- The existing SPL_ Makefile variable is renamed to SPL_
- The existing SPL_TPL Makefile variable is renamed to PHASE_
It should be noted that xpl_phase() can generally be used instead of
the above CONFIGs without a code-space or run-time penalty.
This series does not attempt to convert all of U-Boot to use this new
terminology but it makes a start. In particular, renaming spl.h and
common/spl seems like a bridge too far at this point.
The series is fully bisectable. It has also been checked to ensure there
are no code-size changes on any commit.
Use PHASE_ as the symbol to select a particular XPL build. This means
that SPL_TPL_ is no-longer set.
Update the comment in bootstage to refer to this symbol, instead of
SPL_
Signed-off-by: Simon Glass <sjg@chromium.org>
The Anbernic RG35XX series of devices are based around an Allwinner
H700 SoC with 1GB of RAM, 2 SD cards, and multiple input buttons.
This bootloader has been tested on the Anbernic RG35XX-2024 and
RG35XX-H, but should be suitable for the entire lineup of H700 based
devices.
A future series of updates will add board selection logic to identify
and load the correct device tree automatically.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
The TF-A URL was updated, as a result the name of the
directory changed as part of the new git URL and not
all the referenced directories were updated.
Fixes: 0ec0207fe07 ("Update the ARM trusted firmware git URL")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Oliver Gaskell <Oliver.Gaskell@analog.com> says:
ADSP-SC5xx is a series of ARM-based DSPs.
This comprises the armv7 based SC57x, SC58x and SC594 series, and the
armv8 based SC598.
This patch series includes configurations, init code, and minimal DTs
to enable Analog Devices' evaluation boards for these SoCs to boot
through SPL and into U-Boot Proper, as well as devicetree schemas for
the added DTs.
This patch series depends on ("arm: Add Analog Devices SC5xx Machine
Type") (https://lists.denx.de/pipermail/u-boot/2024-April/552043.html)
Adds support for Analog Devices' SC589-MINI board. Includes:
- Board specific configs in mach-sc5xx/Kconfig
- Board-specific Kconfig and environment in board/adi/
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Adds support for Analog Devices' SC589-EZKIT board. Includes:
- Board specific configs in mach-sc5xx/Kconfig
- Board-specific Kconfig and environment in board/adi/
- Memory configuration
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Adds support for Analog Devices' SC594-SOM-EZLITE board. Includes:
- Board specific configs in mach-sc5xx/Kconfig
- Board-specific Kconfig and environment in board/adi/
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Adds support for Analog Devices' SC598-SOM-EZLITE board. Includes:
- Board specific configs in mach-sc5xx/Kconfig
- Board-specific Kconfig and environment in board/adi/
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
The primary upstream URL for tf-a has moved, in some cases
things like tags are not always pushed to the old URL so
update the URLs to the primary upstream project URL.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Update J722S Resource Management configs to the latest output
generated by K3 Resource Partitioning tool. Main change includes
allocating more BCDMA channels to A53 for CSI2RX to support
4 x CSIRX capture instance simultaneously.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jayesh Choudhary <j-choudhary@ti.com>
When CONFIG_BOOTMETH_ANDROID is set, enable Android boot flow support.
To build for AM62Px for Android, we can re-use
the am62x_a53_android.config fragment when building A53 bootloaders:
$ make am62px_evm_a53_defconfig
$ make am62x_a53_android.config
$ make
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Beagle Play has a different boot flow than the AM62x SK EVM.
AM62x SK EVM:
1. Boot rom reads UDA (User Data Area), looking for tiboot3
2. Boot rom finds tiboot3 and loads it
Beagle Play:
1. Boot rom looks for tiboot3 in mmc0boot0
2. Boot rom finds tiboot3 and loads it
Because of this difference, we need to have a different
partitioning table than the generic TI one.
Include generic TI android support and override the partitioning table
to boot Android.
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
