UEFI:
* Use generated UUIDs in UEFI capsules:
- efi: define struct efi_guid
- lib: uuid: add UUID v5 support
- efi: add a helper to generate dynamic UUIDs
- doc: uefi: document dynamic UUID generation
- sandbox: switch to dynamic UUIDs
- lib: uuid: supporting building as part of host tools
- include: export uuid.h
- tools: mkeficapsule: use u-boot UUID library
- tools: mkeficapsule: support generating dynamic GUIDs
- test: lib/uuid: add unit tests for dynamic UUIDs
- test: lib/uuid: add tests for UUID version/variant bits
* Minor code clean-up
- shorten efi_bootmgr_release_uridp_resource()
- rename efi_bootmgr_image_return_notify
- return the correct error in efi_bootmgr_release_uridp()
- Kconfig: clean up the efi configuration status
- Use puts() in cout so that console recording works
- Put back copyright message in helloworld.c
-----BEGIN PGP SIGNATURE-----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=mncs
-----END PGP SIGNATURE-----
Merge tag 'efi-next-20241024' of https://source.denx.de/u-boot/custodians/u-boot-efi into next
Pull request efi-next-20241024
UEFI:
* Use generated UUIDs in UEFI capsules:
- efi: define struct efi_guid
- lib: uuid: add UUID v5 support
- efi: add a helper to generate dynamic UUIDs
- doc: uefi: document dynamic UUID generation
- sandbox: switch to dynamic UUIDs
- lib: uuid: supporting building as part of host tools
- include: export uuid.h
- tools: mkeficapsule: use u-boot UUID library
- tools: mkeficapsule: support generating dynamic GUIDs
- test: lib/uuid: add unit tests for dynamic UUIDs
- test: lib/uuid: add tests for UUID version/variant bits
* Minor code clean-up
- shorten efi_bootmgr_release_uridp_resource()
- rename efi_bootmgr_image_return_notify
- return the correct error in efi_bootmgr_release_uridp()
- Kconfig: clean up the efi configuration status
- Use puts() in cout so that console recording works
- Put back copyright message in helloworld.c
Move this header to include/u-boot/ so that it can be used by external
tools.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Adjust the UUID library code so that it can be compiled as part of a
host tool.
This removes the one redundant log_debug() call, as well as the
incorrectly defined LOG_CATEGORY.
In general this is a fairly trivial change, just adjusting includes and
disabling list_guid.
This will be used by a new genguid tool to generate v5 GUIDs that match
those generated by U-Boot at runtime.
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Migrate sandbox over to generating it's capsule update image GUIDs
dynamically from the namespace and board/image info. Update the
reference and tests to use the new GUIDs.
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Add support for generating version 5 UUIDs, these are determistic and work
by hashing a "namespace" UUID together with some unique data. One intended
usecase is to allow for dynamically generate payload UUIDs for UEFI
capsule updates, so that supported boards can have their own UUIDs
without needing to hardcode them.
In addition, move the common bit twiddling code from gen_ran_uuid into a
separate function and rewrite it not to use clrsetbits (which is not
available when building as part of host tools).
Tests for this are added in an upcoming patch.
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
This let's us forward declare efi_guid_t in the UUID code without
pulling in efi.h
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
AST2700 SoCs integrates a Ibex 32-bits RISC-V core as the boot MCU
for the first stage bootloader execution, namely SPL.
This patch implements the preliminary base to successfully run SPL
on this RV32-based MCU to the console banner message.
Signed-off-by: Chia-Wei Wang <chiawei_wang@aspeedtech.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
Daniel Schultz <d.schultz@phytec.de> says:
This patch stack extends the phyCORE-AM62x/AM64x U-Boot by following boot
sources:
- Load U-Boot with USB DFU
- Load a Linux and initramfs from OSPI/QSPI NOR flash
- Load a Linux and rootfs from Network
Moreover, it adds required changes to the environment to boot an A/B
system with RAUC and includes some minor fixes.
This boot logic allows to boot a Kernel image, Device-Tree blob
and a initramfs from an external OSPI/QSPI NOR flash.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
This boot logic allows to boot a Kernel image, Device-Tree blob
and overlays via tftp/dhcp (configurable with 'net_fetch_cmd').
Additionally, it loads a rootfs via NFS.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Add a mmc prefix to 'loadimage' and 'loadfdt' because we need
similar variables for other boot sources. This will prevent
name clashes and allows to implement similar boot logic.
Also switch from loadaddr to kernel_addr_r.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
read could be a negative error value but size in spl_image is unsigned
so when they are compared read is used as if it's a unsigned value
and if it's negative it'll most likely be bigger than size and the
result will be true and _spl_load() will return 0 to the caller.
This results in the caller to _spl_load() not seeing that an error happened
as it should and continuing as if the load was completed when it might
not have been.
Check if read is negative and return it's value if it is before comparing
against size in spl_image.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
As per the maintainers at egnite GmbH, they are no longer interested in
supporting this board. Go and remove the platform here. Furthermore,
this is the only AT91SAM9XE platform in-tree so remove supporting code
for that as well.
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
Extend generic_setup_phy() parameter list with PHY mode and submode and
call generic_phy_set_mode() in generic_setup_phy(), so the generic PHY
setup function can configure the PHY into correct mode before powering
the PHY up.
Update all call sites of generic_setup_phy() as well, all of which are
USB host related, except for DM test which now behaves as a USB host
test.
Note that if the PHY driver does not implement the .set_mode callback,
generic_phy_set_mode() call returns 0 and does not error out, so this
should not break any existing systems.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tim Harvey <tharvey@gateworks.com> says:
Modern eMMC v4+ devices have multiple hardware partitions per the JEDEC
specification described as:
Boot Area Partition 1
Boot Area Partition 2
RPMB Partition
General Purpose Partition 1
General Purpose Partition 2
General Purpose Partition 3
General Purpose Partition 4
User Data Area
These are referenced by fields in the PARTITION_CONFIG register
(Extended CSD Register 179) which is defined as:
bit 7: reserved
bit 6: BOOT_ACK
0x0: No boot acknowledge sent (default
0x1: Boot acknowledge sent during boot operation Bit
bit 5:3: BOOT_PARTITION_ENABLE
0x0: Device not boot enabled (default)
0x1: Boot Area partition 1 enabled for boot
0x2: Boot Area partition 2 enabled for boot
0x3-0x6: Reserved
0x7: User area enabled for boot
bit 2:0 PARTITION_ACCESS
0x0: No access to boot partition (default)
0x1: Boot Area partition 1
0x2: Boot Area partition 2
0x3: Replay Protected Memory Block (RPMB)
0x4: Access to General Purpose partition 1
0x5: Access to General Purpose partition 2
0x6: Access to General Purpose partition 3
0x7: Access to General Purpose partition 4
Note that setting PARTITION_ACCESS to 0x0 results in selecting the User
Data Area partition.
You can see above that the two fields BOOT_PARTITION_ENABLE and
PARTITION_ACCESS do not use the same enumerated values.
U-Boot uses a set of macros to access fields of the PARTITION_CONFIG
register:
EXT_CSD_BOOT_ACK_ENABLE (1 << 6)
EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3)
EXT_CSD_PARTITION_ACCESS_ENABLE (1 << 0)
EXT_CSD_PARTITION_ACCESS_DISABLE (0 << 0)
EXT_CSD_BOOT_ACK(x) (x << 6)
EXT_CSD_BOOT_PART_NUM(x) (x << 3)
EXT_CSD_PARTITION_ACCESS(x) (x << 0)
EXT_CSD_EXTRACT_BOOT_ACK(x) (((x) >> 6) & 0x1)
EXT_CSD_EXTRACT_BOOT_PART(x) (((x) >> 3) & 0x7)
EXT_CSD_EXTRACT_PARTITION_ACCESS(x) ((x) & 0x7)
There are various places in U-Boot where the BOOT_PARTITION_ENABLE field
is accessed via EXT_CSD_EXTRACT_PARTITION_ACCESS and converted to a
hardware partition consistent with the definition of the
PARTITION_ACCESS field used by the various mmc_switch incarnations.
To add some sanity to the distinction between BOOT_PARTITION_ENABLE
(used to specify the active device on power-cycle) and PARTITION_ACCESS
(used to switch between hardware partitions) create two enumerated types
and use them wherever struct mmc * part_config is used or the above
macros are used.
Additionally provide arrays of the field names and allow those to be
used in the 'mmc partconf' command and in board support files.
The first patch adds enumerated types and makes use of them which
represents no compiled code change.
The 2nd patch adds the array of names and uses them in the 'mmc
partconf' command.
The 3rd patch uses the array of hardware partition names in a board
support file to show what emmc hardware partition U-Boot is being loaded
from.
eMMC v4+ devices have hardware partitions that are accessed via the
PARTITION_CONFIG (Extended CSD Register 179) PARTITION_ACCESS
and BOOT_PARTITION_ENABLE fields defined as:
bit 5:3: BOOT_PARTITION_ENABLE
0x0: Device not boot enabled (default)
0x1: Boot Area partition 1 enabled for boot
0x2: Boot Area partition 2 enabled for boot
0x3-0x6: Reserved
0x7: User area enabled for boot
bit 2:0 PARTITION_ACCESS
0x0: No access to boot partition (default)
0x1: Boot Area partition 1
0x2: Boot Area partition 2
0x3: Replay Protected Memory Block (RPMB)
0x4: Access to General Purpose partition 1
0x5: Access to General Purpose partition 2
0x6: Access to General Purpose partition 3
0x7: Access to General Purpose partition 4
Add char arrays to provide names for these values.
Use these names which displaying or setting the PARTITION_CONFIG
register via the 'mmc partconf' command.
Before:
u-boot=> mmc partconf 2 1 1 0 && mmc partconf 2
EXT_CSD[179], PARTITION_CONFIG:
BOOT_ACK: 0x1
BOOT_PARTITION_ENABLE: 0x2
PARTITION_ACCESS: 0x0
After:
u-boot=> mmc partconf 2 1 1 0 && mmc partconf 2
EXT_CSD[179], PARTITION_CONFIG:
BOOT_ACK: 0x1
BOOT_PARTITION_ENABLE: 0x1 (boot0)
PARTITION_ACCESS: 0x0 (user)
u-boot=> mmc partconf 2 1 boot1 0 && mmc partconf 2
EXT_CSD[179], PARTITION_CONFIG:
BOOT_ACK: 0x1
BOOT_PARTITION_ENABLE: 0x2 (boot1)
PARTITION_ACCESS: 0x0 (user)
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Modern eMMC v4+ devices have multiple hardware partitions per the JEDEC
specification described as:
Boot Area Partition 1
Boot Area Partition 2
RPMB Partition
General Purpose Partition 1
General Purpose Partition 2
General Purpose Partition 3
General Purpose Partition 4
User Data Area
These are referenced by fields in the PARTITION_CONFIG register
(Extended CSD Register 179) which is defined as:
bit 7: reserved
bit 6: BOOT_ACK
0x0: No boot acknowledge sent (default
0x1: Boot acknowledge sent during boot operation Bit
bit 5:3: BOOT_PARTITION_ENABLE
0x0: Device not boot enabled (default)
0x1: Boot Area partition 1 enabled for boot
0x2: Boot Area partition 2 enabled for boot
0x3-0x6: Reserved
0x7: User area enabled for boot
bit 2:0 PARTITION_ACCESS
0x0: No access to boot partition (default)
0x1: Boot Area partition 1
0x2: Boot Area partition 2
0x3: Replay Protected Memory Block (RPMB)
0x4: Access to General Purpose partition 1
0x5: Access to General Purpose partition 2
0x6: Access to General Purpose partition 3
0x7: Access to General Purpose partition 4
Note that setting PARTITION_ACCESS to 0x0 results in selecting the User
Data Area partition.
You can see above that the two fields BOOT_PARTITION_ENABLE and
PARTITION_ACCESS do not use the same enumerated values.
U-Boot uses a set of macros to access fields of the PARTITION_CONFIG
register:
There are various places in U-Boot where the BOOT_PARTITION_ENABLE field
is accessed via EXT_CSD_EXTRACT_PARTITION_ACCESS and converted to a
hardware partition consistent with the definition of the
PARTITION_ACCESS field which is also the value used to specify the
hardware partition of the various mmc_switch incarnations.
To add some sanity to the distinction between BOOT_PARTITION_ENABLE
(used to specify the active device on power-cycle) and PARTITION_ACCESS
(used to switch between hardware partitions) create two enumerated types
and use them wherever struct mmc * part_config is used or the above
macros are used.
This represents no code changes.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Sughosh Ganu <sughosh.ganu@linaro.org> says:
This is a follow-up from an earlier RFC series [1] for making the LMB
and EFI memory allocations work together. This is a non-rfc version
with only the LMB part of the patches, for making the LMB memory map
global and persistent.
This is part one of a set of patches which aim to have the LMB and EFI
memory allocations work together. This requires making the LMB memory
map global and persistent, instead of having local, caller specific
maps. This is being done keeping in mind the usage of LMB memory by
platforms where the same memory region can be used to load multiple
different images. What is not allowed is to overwrite memory that has
been allocated by the other module, currently the EFI memory
module. This is being achieved by introducing a new flag,
LMB_NOOVERWRITE, which represents memory which cannot be re-requested
once allocated.
The data structures (alloced lists) required for maintaining the LMB
map are initialised during board init. The LMB module is enabled by
default for the main U-Boot image, while it needs to be enabled for
SPL. This version also uses a stack implementation, as suggested by
Simon Glass to temporarily store the lmb structure instance which is
used during normal operation when running lmb tests. This does away
with the need to run the lmb tests separately.
The tests have been tweaked where needed because of these changes.
The second part of the patches, to be sent subsequently, would work on
having the EFI allocations work with the LMB API's.
[1] - https://lore.kernel.org/u-boot/20240704073544.670249-1-sughosh.ganu@linaro.org/T/#t
Notes:
1) These patches are on next, as the alist patches have been
applied to that branch.
2) I have tested the boot on the ST DK2 board, but it would be good to
get a T-b/R-b from the ST maintainers.
3) It will be good to test these changes on a PowerPC platform
(ideally an 85xx, as I do not have one).
The board_lmb_reserve() function is not being used, and currently
there is only an empty weak function defined. Remove this unused
function.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
All of the current definitions of arch_lmb_reserve() are doing the
same thing -- reserve the region of memory occupied by U-Boot,
starting from the current stack address to the ram_top. Introduce a
function lmb_reserve_uboot_region() which does this, and do away with
the arch_lmb_reserve() function.
Instead of using the current value of stack pointer for starting the
reserved region, have a fixed value, considering the stack size config
value.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
With the move to make the LMB allocations persistent and the common
memory regions being reserved during board init, there is no need for
an explicit reservation of a memory range. Remove the
lmb_init_and_reserve_range() function.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
With the changes to make the LMB reservations persistent, the common
memory regions are being added during board init. Remove the
now superfluous lmb_init_and_reserve() function.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Introduce a function lmb_add_memory() to add available memory to the
LMB memory map. Call this function during board init once the LMB data
structures have been initialised.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Allow for resizing of LMB regions if the region attributes match. The
current code returns a failure status on detecting an overlapping
address. This worked up until now since the LMB calls were not
persistent and global -- the LMB memory map was specific and private
to a given caller of the LMB API's.
With the change in the LMB code to make the LMB reservations
persistent, there needs to be a check on whether the memory region can
be resized, and then do it if so. To distinguish between memory that
cannot be resized, add a new flag, LMB_NOOVERWRITE. Reserving a region
of memory with this attribute would indicate that the region cannot be
resized.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
The current LMB API's for allocating and reserving memory use a
per-caller based memory view. Memory allocated by a caller can then be
overwritten by another caller. Make these allocations and reservations
persistent using the alloced list data structure.
Two alloced lists are declared -- one for the available(free) memory,
and one for the used memory. Once full, the list can then be extended
at runtime.
[sjg: Use a stack to store pointer of lmb struct when running lmb tests]
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
[sjg: Optimise the logic to add a region in lmb_add_region_flags()]
Use the BIT macro for assigning values to the LMB flags instead of
assigning random values to them.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The __lmb_alloc_base() function is only called from within the lmb
module. Moreover, the lmb_alloc() and lmb_alloc_base() API's are good
enough for the allocation API calls. Make the __lmb_alloc_base()
function static.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The lmb_is_reserved() API is not used. There is another API,
lmb_is_reserved_flags() which can be used to check if a particular
memory region is reserved. Remove the unused API.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add a helper function to check if the alist is full. This can then be
used to extend the alist.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Philip Oberfichtner <pro@denx.de> says:
This patch series implements the dwc_eth_qos glue driver for Intel SOCs.
Before doing that, a few general adaptions to the dwc_eth_qos.c main
driver are required. Most notably, the preparation for PCI based driver
instances, which do not necessarily use a device tree.
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/22211
- Enable SPI NOR flash support and MTD partitions for phycore_imx8mp.
- Convert mx6slevk to OF_UPSTREAM and watchdog DM.
- Cleanup some mx5/mx6 USB options.
- Make PLL settings configurable at board level.
- Set CONFIG_SPL_LOAD_FIT_ADDRESS for verdin-imx8m/p.
- Make the mxc-gpio reading state of GPIO pins in output mode to be
consistent with the Linux kernel.
- Add HUK derivation support for ELE AHAB.
-----BEGIN PGP SIGNATURE-----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=EJ2u
-----END PGP SIGNATURE-----
Merge tag 'u-boot-amlogic-next-20240902' of https://source.denx.de/u-boot/custodians/u-boot-amlogic into next
- meson_nand: R/W support for pages used by boot ROM
The definition of CFG_MXC_USB_PORTSC as (PORT_PTS_UTMI | PORT_PTS_PTW)
can be removed from mx5/mx6/mx7/mx8m board config files as it is the
default in drivers/usb/host/ehci-mx5.c and drivers/usb/host/ehci-mx6.c.
Suggested-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
CFG_MXC_USB_PORT is not used anywhere, so remove this unused symbol.
Suggested-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
CFG_MXC_USB_FLAGS is only used for drivers/usb/host/ehci-mx5.c, so it
can be removed from all the imx6/imx7/imx8m board config files.
mx51evk.h is the only place CFG_MXC_USB_FLAGS is not set to 0.
Suggested-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
The SD card is registered as mmc device 0.
Fix it accordingly so that the board can boot to Linux
from the SD card.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Based on Linux kernel:
commit f922bd798bb9 ("mtd: rawnand: add an option to specify NAND chip as a boot device")
Allow to define a NAND chip as a boot device. This can be helpful
for the selection of the ECC algorithm and strength in case the boot
ROM supports only a subset of controller provided options.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Link: https://lore.kernel.org/r/20240826131710.29746-2-avkrasnov@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Fix signed vs unsigned compare in read check in _spl_load()
Issue: when info->read() returns a negative value because of an error,
the comparison of 'read' (signed) with 'sizeof(*header)'
(unsigned silently converts the negative value into a very
large unsigned value and the check on the error condition
always return false, i.e. the error is not detected
Symptoms: if spl_load_image_fat() is unable to find the file 'uImage',
the SPL phase of the boot process just hangs after displaying
the following line:
Trying to boot from MMC1
Fix: cast 'sizeof(*header)' to int so the compare is now between
signed types
Reference: https://stackoverflow.com/questions/17293749/sizeof-operator-in-if-statement
Signed-off-by: Franco Venturi <fventuri@comcast.net>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
The sandbox pinmux driver is used in the non-test devicetree as well as
the test one. I didn't realize this when I modified the driver for
tests, and so broke the regular use case (which only resulted in
warnings). First, making the pinmux and the UART group available
pre-relocation to avoid ENODEV errors. Then, convert the pin groups and
functions to the new style, adding onewire group as well.
Fixes: 7f0f1806e3a ("test: pinmux: Add test for pin muxing")
Closes: https://source.denx.de/u-boot/u-boot/-/issues/2
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass <sjg@chromium.org> says:
This series started as a small fix for checking for an empty line,
but in the process several other problems were found and fixed:
- fix tests which use console recording but don't set the flag
- drop unnecessary resetting of the console in tests
- drop unnecessary blank line before MMC output
- update the docs a little
- fix buildman test failure on newer Pythons
- a few other minor things
This series also renames the confusing flag names, so that they are
easier to remember - just a UTF_ (unit-test flags) prefix.
The _REC suffix doesn't add much. Really what we want to know is whether
the test uses the console, so rename this flag.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
The UT_TESTF_ macros read as 'unit test test flags' which is not right.
Rename to UTF ('unit test flags').
This has the benefit of being shorter, which helps keep UNIT_TEST()
declarations on a single line.
Give the enum a name and reference it from the UNIT_TEST() macros while
we are here.
Signed-off-by: Simon Glass <sjg@chromium.org>
The existing implementation of ut_assert_nextline_empty() cannot
distinguish between an empty line and no line at all. It can in fact be
called at the end of the recorded output and will happily return
success.
Adjust the logic so that this condition is detected. Show a failure
message in this case.
Fix the one test which falls foul of this fix.
Signed-off-by: Simon Glass <sjg@chromium.org>
Fixes: 400175b0a7d ("test: Add a way to check each line of console...")
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
If the environment is not enabled we don't need these fields in
global_data. Make them conditional.
Make these fields conditional. Move env_buf up one so it can share
an #ifdef.
Signed-off-by: Simon Glass <sjg@chromium.org>
