Instead of writing DRDMCR with 0 first and then overwriting DRDMCR again
in case any dummy bytes have to be sent out, write DRDMCR in every case
with the amount of dummy bytes that have to be sent out. In case no dummy
bytes have to be sent out, the value written into DRDMCR is zero, so no
dummy bytes are sent out. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Instead of writing DREAR with 0 first and then overwriting DREAR again
in case of 4 byte addressing mode, write DREAR in every case once with
the correct content right away. No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Add device tree compatible string "renesas,rcar-gen4-rpc-if" to
the driver to match on upstream RPC DT node in R-Car Gen4 DTs.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
This soc doesn't have the generic compatible.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
We don't actually need any clocks to get UFS up and running, resets are
useful though.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Add the PM8550 & related regulators found on the SM8550 and SM8650 platforms.
The tables are imported from the Linux driver.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
The TCS writes has no effect after the removal of the __tcs_set_trigger()
call, obviously it seems the RSC version 3 requires it to complete the transactions.
Fixes: 80c5be164ad ("soc: qcom: rpmh-rsc: drop unused multi-threading and non-active TCS support")
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Tested-by: Caleb Connolly <caleb.connolly@linaro.org> # sm8250 rb5
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
On at least SM8650 this region might not be included in the memory map.
Use the new mmu_map_region() helper to map it during bind().
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
memcmp() can cause aborts on some platforms and generally seems to be
the wrong approach here. Use strncmp() instead which is more correct.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
For regulator-fixed-clock, the device's private data is never set so in
fixed_clock_regulator_set_enable() is null and the function cannot
complete successfully.
Rename the _plat structure to _priv to better represent its role and set
this as the private data. As shown by the set_enable() function and by
using the same .of_to_plat hook as regulator-fixed, the platform data is
regulator_common_plat so also set .plat_auto correctly.
Finally, set up the private data by adding a .probe function to look up
the clock and set the member variable.
Fixes: f3b5100aff3 ("regulator: fixed: add possibility to enable by clock")
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
The JH7110 SoC uses a GPIO for card detect.
* In the of_to_plat function check if a cd-gpios definition exists and
request the GPIO.
* In the getcd function return the GPIO value in this case.
Reported-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
After resetting the host controller, program in the POR val for this
register just like the Linux driver does.
This seems to help with initialization when running U-Boot as the primary
bootloader on some boards.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Per JESD84-B51 P47, host need to change frequency to <=52MHz
after setting HS_TIMING to 0x1, and host need to set the
8-bit DDR buswidth. Currently setting the frequency to 26MHz
and trying to switch 8-bit DDR buswidth resulting timeouts.
mmc dev 1 0
Select HS400 failed -110
switch to partitions #0, OK
mmc1(part 0) is current device
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Cadence SDMMC v6 controller has a lot of changes on initialize
compared to v4 controller. PHY is needed by v6 controller.
Signed-off-by: Kuan Lim Lee <kuanlim.lee@starfivetech.com>
Co-developed-by: Alex Soo <yuklin.soo@starfivetech.com>
Signed-off-by: Wei Liang Lim <weiliang.lim@starfivetech.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Tim Harvey <tharvey@gateworks.com> says:
Modern eMMC v4+ devices have multiple hardware partitions per the JEDEC
specification described as:
Boot Area Partition 1
Boot Area Partition 2
RPMB Partition
General Purpose Partition 1
General Purpose Partition 2
General Purpose Partition 3
General Purpose Partition 4
User Data Area
These are referenced by fields in the PARTITION_CONFIG register
(Extended CSD Register 179) which is defined as:
bit 7: reserved
bit 6: BOOT_ACK
0x0: No boot acknowledge sent (default
0x1: Boot acknowledge sent during boot operation Bit
bit 5:3: BOOT_PARTITION_ENABLE
0x0: Device not boot enabled (default)
0x1: Boot Area partition 1 enabled for boot
0x2: Boot Area partition 2 enabled for boot
0x3-0x6: Reserved
0x7: User area enabled for boot
bit 2:0 PARTITION_ACCESS
0x0: No access to boot partition (default)
0x1: Boot Area partition 1
0x2: Boot Area partition 2
0x3: Replay Protected Memory Block (RPMB)
0x4: Access to General Purpose partition 1
0x5: Access to General Purpose partition 2
0x6: Access to General Purpose partition 3
0x7: Access to General Purpose partition 4
Note that setting PARTITION_ACCESS to 0x0 results in selecting the User
Data Area partition.
You can see above that the two fields BOOT_PARTITION_ENABLE and
PARTITION_ACCESS do not use the same enumerated values.
U-Boot uses a set of macros to access fields of the PARTITION_CONFIG
register:
EXT_CSD_BOOT_ACK_ENABLE (1 << 6)
EXT_CSD_BOOT_PARTITION_ENABLE (1 << 3)
EXT_CSD_PARTITION_ACCESS_ENABLE (1 << 0)
EXT_CSD_PARTITION_ACCESS_DISABLE (0 << 0)
EXT_CSD_BOOT_ACK(x) (x << 6)
EXT_CSD_BOOT_PART_NUM(x) (x << 3)
EXT_CSD_PARTITION_ACCESS(x) (x << 0)
EXT_CSD_EXTRACT_BOOT_ACK(x) (((x) >> 6) & 0x1)
EXT_CSD_EXTRACT_BOOT_PART(x) (((x) >> 3) & 0x7)
EXT_CSD_EXTRACT_PARTITION_ACCESS(x) ((x) & 0x7)
There are various places in U-Boot where the BOOT_PARTITION_ENABLE field
is accessed via EXT_CSD_EXTRACT_PARTITION_ACCESS and converted to a
hardware partition consistent with the definition of the
PARTITION_ACCESS field used by the various mmc_switch incarnations.
To add some sanity to the distinction between BOOT_PARTITION_ENABLE
(used to specify the active device on power-cycle) and PARTITION_ACCESS
(used to switch between hardware partitions) create two enumerated types
and use them wherever struct mmc * part_config is used or the above
macros are used.
Additionally provide arrays of the field names and allow those to be
used in the 'mmc partconf' command and in board support files.
The first patch adds enumerated types and makes use of them which
represents no compiled code change.
The 2nd patch adds the array of names and uses them in the 'mmc
partconf' command.
The 3rd patch uses the array of hardware partition names in a board
support file to show what emmc hardware partition U-Boot is being loaded
from.
eMMC v4+ devices have hardware partitions that are accessed via the
PARTITION_CONFIG (Extended CSD Register 179) PARTITION_ACCESS
and BOOT_PARTITION_ENABLE fields defined as:
bit 5:3: BOOT_PARTITION_ENABLE
0x0: Device not boot enabled (default)
0x1: Boot Area partition 1 enabled for boot
0x2: Boot Area partition 2 enabled for boot
0x3-0x6: Reserved
0x7: User area enabled for boot
bit 2:0 PARTITION_ACCESS
0x0: No access to boot partition (default)
0x1: Boot Area partition 1
0x2: Boot Area partition 2
0x3: Replay Protected Memory Block (RPMB)
0x4: Access to General Purpose partition 1
0x5: Access to General Purpose partition 2
0x6: Access to General Purpose partition 3
0x7: Access to General Purpose partition 4
Add char arrays to provide names for these values.
Use these names which displaying or setting the PARTITION_CONFIG
register via the 'mmc partconf' command.
Before:
u-boot=> mmc partconf 2 1 1 0 && mmc partconf 2
EXT_CSD[179], PARTITION_CONFIG:
BOOT_ACK: 0x1
BOOT_PARTITION_ENABLE: 0x2
PARTITION_ACCESS: 0x0
After:
u-boot=> mmc partconf 2 1 1 0 && mmc partconf 2
EXT_CSD[179], PARTITION_CONFIG:
BOOT_ACK: 0x1
BOOT_PARTITION_ENABLE: 0x1 (boot0)
PARTITION_ACCESS: 0x0 (user)
u-boot=> mmc partconf 2 1 boot1 0 && mmc partconf 2
EXT_CSD[179], PARTITION_CONFIG:
BOOT_ACK: 0x1
BOOT_PARTITION_ENABLE: 0x2 (boot1)
PARTITION_ACCESS: 0x0 (user)
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Sughosh Ganu <sughosh.ganu@linaro.org> says:
This is a follow-up from an earlier RFC series [1] for making the LMB
and EFI memory allocations work together. This is a non-rfc version
with only the LMB part of the patches, for making the LMB memory map
global and persistent.
This is part one of a set of patches which aim to have the LMB and EFI
memory allocations work together. This requires making the LMB memory
map global and persistent, instead of having local, caller specific
maps. This is being done keeping in mind the usage of LMB memory by
platforms where the same memory region can be used to load multiple
different images. What is not allowed is to overwrite memory that has
been allocated by the other module, currently the EFI memory
module. This is being achieved by introducing a new flag,
LMB_NOOVERWRITE, which represents memory which cannot be re-requested
once allocated.
The data structures (alloced lists) required for maintaining the LMB
map are initialised during board init. The LMB module is enabled by
default for the main U-Boot image, while it needs to be enabled for
SPL. This version also uses a stack implementation, as suggested by
Simon Glass to temporarily store the lmb structure instance which is
used during normal operation when running lmb tests. This does away
with the need to run the lmb tests separately.
The tests have been tweaked where needed because of these changes.
The second part of the patches, to be sent subsequently, would work on
having the EFI allocations work with the LMB API's.
[1] - https://lore.kernel.org/u-boot/20240704073544.670249-1-sughosh.ganu@linaro.org/T/#t
Notes:
1) These patches are on next, as the alist patches have been
applied to that branch.
2) I have tested the boot on the ST DK2 board, but it would be good to
get a T-b/R-b from the ST maintainers.
3) It will be good to test these changes on a PowerPC platform
(ideally an 85xx, as I do not have one).
The sandbox iommu driver uses the LMB module to allocate a particular
range of memory for the device virtual address(DVA). This used to work
earlier since the LMB memory map was caller specific and not
global. But with the change to make the LMB allocations global and
persistent, adding this memory range has other side effects. On the
other hand, the sandbox iommu test expects to see this particular
value of the DVA. Use the DVA address directly, instead of mapping it
in the LMB memory map, and then have it allocated.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
The current LMB API's for allocating and reserving memory use a
per-caller based memory view. Memory allocated by a caller can then be
overwritten by another caller. Make these allocations and reservations
persistent using the alloced list data structure.
Two alloced lists are declared -- one for the available(free) memory,
and one for the used memory. Once full, the list can then be extended
at runtime.
[sjg: Use a stack to store pointer of lmb struct when running lmb tests]
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Signed-off-by: Simon Glass <sjg@chromium.org>
[sjg: Optimise the logic to add a region in lmb_add_region_flags()]
Philip Oberfichtner <pro@denx.de> says:
This patch series implements the dwc_eth_qos glue driver for Intel SOCs.
Before doing that, a few general adaptions to the dwc_eth_qos.c main
driver are required. Most notably, the preparation for PCI based driver
instances, which do not necessarily use a device tree.
PCI devices do not necessarily use a device tree. Implement a bind()
function to assign unique device names in that case.
Signed-off-by: Philip Oberfichtner <pro@denx.de>
PCI devices do not necessarily use a device tree. In that case, the
driver currently fails to find eqos->config and eqos->regs.
This commit factors out the respective functionality. Device tree usage
remains default, but board specific implementations will be possible as
well.
Signed-off-by: Philip Oberfichtner <pro@denx.de>
Before this commit, usage of this header relied on a specific include
order. Fix it by including all dependencies.
Signed-off-by: Philip Oberfichtner <pro@denx.de>
Reviewed-by: Marek Vasut <marex@denx.de>
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/22211
- Enable SPI NOR flash support and MTD partitions for phycore_imx8mp.
- Convert mx6slevk to OF_UPSTREAM and watchdog DM.
- Cleanup some mx5/mx6 USB options.
- Make PLL settings configurable at board level.
- Set CONFIG_SPL_LOAD_FIT_ADDRESS for verdin-imx8m/p.
- Make the mxc-gpio reading state of GPIO pins in output mode to be
consistent with the Linux kernel.
- Add HUK derivation support for ELE AHAB.
-----BEGIN PGP SIGNATURE-----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=EJ2u
-----END PGP SIGNATURE-----
Merge tag 'u-boot-amlogic-next-20240902' of https://source.denx.de/u-boot/custodians/u-boot-amlogic into next
- meson_nand: R/W support for pages used by boot ROM
Just like drivers/usb/host/ehci-mx6.c, add a default for
drivers/usb/host/ehci-mx5.c.
The motivation for doing this is to remove CFG_MXC_USB_PORTSC
from board config files.
All the mx5 boards, with the exeption of mx51evk, define
CFG_MXC_USB_PORTSC as:
#define CFG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
So move this definition as a default into ehci-mx5.c.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Marek Vasut <marex@denx.de>
The PSR register works correctly for GPIO pins in input mode,
but always returns 0 for GPIO pins in output mode unless the SION
bit is set.
The DR register should be used for GPIO pins in output mode
to allow correct getting of previously set output value.
Please note that the Linux gpio-mxc driver and the NXP U-Boot mxc_gpio
driver already use the DR register for all GPIO pins in output mode:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=442b2494b17d1a4f0a14721580271eb23ebffd424afc3f9094
Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz>
Reviewed-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Chintan Vankar <c-vankar@ti.com> says:
This series enables Ethernet Boot on SK-AM62 device.
This series is based on commit 'f4f845b85926' of origin/next branch of
U-Boot.
Logs for Ethernet Boot for AM625-SK:
https://gist.github.com/chintanv133/464782796a9a60b9f5a49e674c5fc31a
In absence of Device Manager (DM) services such as at R5 SPL stage,
driver will have to natively setup TCHAN/RCHAN/RFLOW cfg registers.
Existing UDMA driver performed the above mentioned configuration
for UDMA. Add similar configuration for PKTDMA here.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Function "k3_ringacc_ring_reconfig_qmode_raw()" should reset qmode to
requested value and should not update other fields in ring configuration
register.
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Expectation of k3_ringacc_ring_reset_raw() is to reset the ring to
requested size and not to 0. Fix this.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Initialize base address of ring config registers required to natively
setup ring cfg registers in the absence of Device Manager (DM) services
at R5 SPL stage. Since register property is defined as "ring" for PKTDMA
and "cfg" for UDMA, configure base address of ring configuration register
accordingly.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
RX_FL_CFG message should not be forwarded to TIFS and should be
handled within R5 SPL (when DM services are not available). Add
a no-op function to not handle RX_FL_CFG messages.
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Chintan Vankar <c-vankar@ti.com>
Use the API function list_count_nodes() to count the number of list
entries.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add a new ahab_derive command that derives the hardware unique key (HUK)
into a 16 or 32 bytes key and stores it at the given address.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
Reviewed-by: Ye Li <ye.li@nxp.com>
Boot ROM on Meson needs some pages to be read/written in a special mode:
384 byte ECC mode (so called "short" by Amlogic) and with scrambling
enabled. Such pages are located on the chip in the following way (for
example):
[ p0 ][ p1 ][ p2 ][ p3 ][ p4 ][ p5 ][ p6 ][ p7 ] ... [ pN ]
^ ^ ^ ^
pX is page number "X". "^" means "special" page used by boot ROM - e.g.
every 2nd page in the range of [0, 7]. Step (2 here) and last page in
range is read from the device tree.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Link: https://lore.kernel.org/r/20240826131710.29746-4-avkrasnov@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Based on Linux kernel:
commit f922bd798bb9 ("mtd: rawnand: add an option to specify NAND chip as a boot device")
Allow to define a NAND chip as a boot device. This can be helpful
for the selection of the ECC algorithm and strength in case the boot
ROM supports only a subset of controller provided options.
Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Link: https://lore.kernel.org/r/20240826131710.29746-2-avkrasnov@salutedevices.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
In the 7th generation of the SoC from Aspeed, the control logic of the
GPIO controller has been updated to support per-pin control. Each pin now
has its own 32-bit register, allowing for individual control of the pin’s
value, direction, interrupt type, and other settings.
Signed-off-by: Billy Tsai <billy_tsai@aspeedtech.com>
Enabling CONFIG_DM_SEQ_ALIAS enables code which relies on
`trailing_strtol()` - which is only linked in SPL when CONFIG_SPL_STRTO
is enabled.
CONFIG_SPL_STRTO is not enabled by default - to ensure this function is
available in SPL, CONFIG_SPL_DM_SEQ_ALIAS should select
CONFIG_SPL_STRTO.
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Jonas Karlman <jonas@kwiboo.se> says:
Use of fdt_parent_offset() is very expensive as detailed by the function
documentation:
NOTE: This function is expensive, as it must scan the device tree
structure from the start to nodeoffset, *twice*.
This series remove multiple calls to fdt_parent_offset() or
ofnode_get_parent() when instead a single call can be made and the
returned value can be reused.
This series help reduce boot time by around:
- ~137ms on a Radxa ROCK Pi 4 (RK3399)
- ~33ms on a Radxa ZERO 3W (RK3566)
The counter value read from TDR register may not be correct.
Read SECCNT and CNTR25M instead to get the correct timestamp.
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
Until a live tree is used in U-Boot proper after relocation, use of
ofnode_get_parent() will trigger a call to the very expensive
fdt_parent_offset(), as detailed by the function documentation:
NOTE: This function is expensive, as it must scan the device tree
structure from the start to nodeoffset, *twice*.
Re-use the returned value from a single call instead of having to make
multiple calls for same node.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
Until a live tree is used in U-Boot proper after relocation, use of
ofnode_get_parent() will trigger a call to the very expensive
fdt_parent_offset() as detailed by the function documentation:
NOTE: This function is expensive, as it must scan the device tree
structure from the start to nodeoffset, *twice*.
Re-use the returned value from a single call instead of having to make
multiple calls for same node.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
Use of fdt_parent_offset() is very expensive as detailed by the function
documentation:
NOTE: This function is expensive, as it must scan the device tree
structure from the start to nodeoffset, *twice*.
Re-use the returned value from a single call instead of having to make
multiple calls for same nodeoffset.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add Nuvoton BMC NPCM7xx/NPCM8xx sgpio driver.
BMC can use this driver to increase 64 GPI pins and 64 GPO pins to use.
Signed-off-by: Jim Liu <JJLIU0@nuvoton.com>
Currently uclass index is shown in DM tree dump which ignores alias
sequence numbering. The result could be confusing since these 2 numbers
could be different. Show device sequence number instead as it's more
meaningful.
Also update documentation to use sequence number.
Signed-off-by: Zixun LI <admin@hifiphile.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
