Enable USB host as well as USB gadget and DFU support for a53 and r5
configs. Also, enable UUU fastboot support to download files with
the UUU tool from a53.
Additionally, configure usb0 to peripheral mode and add extra
environment for DFU use.
Signed-off-by: Vitor Soares <vitor.soares@toradex.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
- add support for compressed kernel for rk3308
- prepare support for fdtoverlay for rk3328
tested on ROCK Pi S 256MB, ROCK Pi E 2GB, and ROCK Pi 4A 4GB with
linux-next-20240613 defconfig kernel.
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
this is cosmetic change. no functional change is intended.
- remove redundant white spaces
- replace white spaces with tab
- align position of last letter/word
- sort lines in CFG_EXTRA_ENV_SETTINGS
- add comment after #endif
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The NanoPi R6S is a SBC by FriendlyElec based on the Rockchip RK3588s.
It comes with 4GB or 8GB of RAM, a microSD card slot, 32GB eMMC storage,
one RTL8211F 1GbE and two RTL8125 2.5GbE Ethernet ports, one USB 2.0
Type-A and one USB 3.0 Type-A port, a HDMI port, a 12-pin GPIO FPC
connector, a fan connector, IR receiver as well as some buttons and LEDs.
Add initial support for this board using the upstream devicetree sources.
Kernel commit:
f1b11f43b3e9 ("arm64: dts: rockchip: Add support for NanoPi R6S")
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Sebastian Kropatsch <seb-dev@mail.de>
The NanoPi R6C is a SBC by FriendlyElec based on the Rockchip RK3588s.
It comes with 4GB or 8GB of RAM, a microSD card slot, optional 32GB eMMC
storage, one M.2 M-Key connector, one RTL8211F 1GbE and one RTL8125
2.5GbE Ethernet port, one USB 2.0 Type-A and one USB 3.0 Type-A port, a
HDMI port, a 30-pin GPIO header as well as multiple buttons and LEDs.
Add initial support for this board using the upstream devicetree sources.
Tested in U-Boot proper:
- Booting from eMMC works
- 1GbE Ethernet works using the eth_eqos driver (tested by ping)
- 2.5GbE Ethernet works using the eth_rtl8169 driver (tested by ping),
but the status LEDs on this specific port currently aren't working
- NVMe SSD in M.2 socket does get recognized (tested with `nvme scan`
followed by `nvme details`)
Kernel commit:
d5f1d7437451 ("arm64: dts: rockchip: Add support for NanoPi R6C")
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Sebastian Kropatsch <seb-dev@mail.de>
No meaningful changes were made to this SoM since February 2021. Nobody
from Theobroma has booted anything recent on that product since July
2021 at the latest. The product isn't available to buy anymore and
disappeared from our website.
This product is therefore unmaintained and it would be disingenuous to
say the opposite, so drop support for RK3368 Lion.
If you're a user of Lion, feel free to revert this patch or contact our
sales/support department.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Move the guidcmp() and guidcpy() functions to efi.h, near the definition of
the efi_guid_t type those functions deal with.
Signed-off-by: Vincent Stehlé <vincent.stehle@arm.com>
Cc: Heinrich Schuchardt <xypron.glpk@gmx.de>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Manorit Chawdhry <m-chawdhry@ti.com> says:
fdtfile wasn't being populated in these boards in legacy boot using
bootcmd_ti_mmc, migrate these platforms to ti_set_fdt_env.
findfdt is used by bootcmd_ti_mmc by default which used to help populate
the fdtfile. The users of findfdt from bootcmd_ti_mmc have migrated to
ti_set_fdt_env for populating fdtfile; Hence, findfdt can be removed from
bootcmd_ti_mmc having no-impact for any platform.
Remove findfdt to not print out the warning that gets set after calling
ti_set_fdt_env. viz.
"echo WARN: fdtfile already set. Stop using findfdt in script"
Signed-off-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
name_fdt is kept for backward compatibility but it depends on EEPROM
detection logic and some of the TI K3 platforms don't have that anymore
which causes boot failure in legacy boot flow using bootcmd_ti_mmc.
K2g platforms which uses the same file have their own override causing
this change to be no-impact for them.
Replacing name_fdt usage to fdtfile as fdtfile is populated based on
CONFIG_DEFAULT_DEVICE_TREE after using ti_set_fdt_env.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Nothing really major here, some rework of the SPL PMIC drivers, adding
support for the AXP717 on the way, which is showing up on newer boards
now, most prominently some Anbernic handheld gaming devices. The rest
is enabling Ethernet and SPI boot on the Allwinner V3s SoC, plus two
fixes. This also updates the "traditional U-Boot" DTs to that of kernel
v6.9. I will look into upgrading some SoCs to dts/upstream in the
coming cycle, though this will not cover all SoCs for now, as we carry
some non-mainline fix to improve compatibility with older kernels. Will
see how it goes, but for now we stick with the "old way".
The branch survived the gitlab CI run, and Linux boot testing on some
selected boards.
- Switch to standard boot (in include/configs/ds414.h and
configs/ds414_defconfig)
- Implement board_late_init() to ensure successful enumeration
of USB3 devices
- Remove unnecessary checkboard()
- Updated IDENT_STRING to indicate this u-boot supports both Synology
DS414 and DS214+ boards
- Add SYS_THUMB_BUILD to reduce binary size
- Add NET_RANDOM_ETHADDR
- Add CONFIG_LBA48 and CONFIG_SYS_64BIT_LBA to support >2TB HDD/SDD
Signed-off-by: Tony Dinh <mibodhi@gmail.com>
Reviewed-by: Stefan Roese <sr@denx.de>
Acked-by: Phil Sutter <phil@nwl.cc>
The X-Powers AXP717 is a PMIC with four buck converters and a number
of LDOs, one of which is actually fixed (so not modelled here).
Add the compatible string and the respective regulator ranges to allow
drivers to adjust voltages.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Ryan Walklin <ryan@testtoast.com>
The clock definitions in <dt-bindings/clock/r8a779?-clock.h> were
superseded by those in <dt-bindings/clock/r8a779?-cpg-mssr.h> a long
time ago.
In fact U-Boot never used <dt-bindings/clock/r8a779?-clock.h>.
The unused headers, their replacements, and the corresponding
r8a779?.dtsi files were introduced together in U-Boot v2018.03.
Fixes: 16b6e4aa3732cee1 ("ARM: dts: rmobile: Import R8A7790 DTS from Linux 4.15-rc8")
Fixes: edd15fcffba31452 ("ARM: dts: rmobile: Import R8A7791 DTS from Linux 4.15-rc8")
Fixes: a3fb9ff3b33fae05 ("ARM: dts: rmobile: Import R8A7792 DTS from Linux 4.15-rc8")
Fixes: 92aa09959271d08f ("ARM: dts: rmobile: Import R8A7793 DTS from Linux 4.15-rc8")
Fixes: 9a26fc5a73fe2369 ("ARM: dts: rmobile: Import R8A7794 DTS from Linux 4.15-rc8")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Mojík <marek.mojik@nic.cz> says:
Hello all,
this is a continuation of previous work by Pali to add support for the
Turris 1.x board. As the patches were based on u-boot v2022.04, a
nontrivial rebasing was needed.
Some notes:
- Some options that are in SD defconfig are disabled in NOR defconfig
because over the years u-boot grew and the old NOR defconfig will not
fit into NOR memory.
- SD boot with RAM larger than 2GB will only allocate 2GB of RAM (We
were not able to fix this yet)
Add support for CZ.NIC Turris 1.x routers.
CZ.NIC Turris 1.0 (RTRS01) and 1.1 (RTRS02) are open source routers, they
have dual-core PowerPC Freescale P2020 CPU and are based on reference
Freescale P2020RDB-PC-A board design.
Hardware design is fully open source, all firmware and hardware design
files are available at Turris project website:
https://docs.turris.cz/hw/turris-1x/turris-1x/https://project.turris.cz/en/hardware.html
The P2020 BootROM can load U-Boot either from NOR flash or from SD card.
We add the new defconfigs, turris_1x_nor_defconfig, which configures
U-Boot for building the NOR image, and turris_1x_sdcard_defconfig, which
configures U-Boot for building an image suitable for SD card.
The defconfig for NOR image is stripped-down a - many config options
enabled in SD defconfig are disabled for NOR defconfig. This is because
U-Boot grew non-trivially in the last two years and it would not fit
into the space allocated for U-Boot in the NOR memory. In the future we
may try to use LTO to reduce the size of the code and enable more
options.
The design of CZ.NIC Turris 1.x routers is based on Freescale P2020RDB-PC-A
board, so some code from boards/freescale/p1_p2_rdb_pc is used and linked
into Turris 1.x board code.
Turris 1.x code in this patch uses modern distroboot and can boot Linux
kernel from various locations, including NAND, SD card, USB flash disks,
NVMe disks or SATA disks (connected to extra SATA/SCSI PCIe controllers).
Via distroboot is implemented also rescue NOR boot for factory recovery,
triggered by reset button, like on other existing Turris routers.
SD boot with RAM larger than 2GB will only allocate 2GB of RAM (We were
not able to fix this yet)
[ Because various CONFIG_ macros were migrated to Kconfig since the last
time this worked on upstream U-Boot (in 2022), a non-trivial rebasing
was needed and some issues were solved. ]
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Mojík <marek.mojik@nic.cz>
Reviewed-by: Marek Behún <kabel@kernel.org>
u-boot-dfu-20240711
Usb gadget:
- A welcome cleanup: epautoconf workaround is dropped to use
.match_ep() instead
- Introduce handle_interrupts() op for USB_GADGET_GENERIC, which
allows a per-driver interrupt handling
Fastboot:
- Fix mssing include when building with TCP only
Fixes a compile error when building with only the TCP fastboot
implementation.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/20240621015135.1570605-1-caleb.connolly@linaro.org
[mkorpershoek: wrapped commit msg to fix checkpatch]
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
- Add mvebu_espressobin_ultra-88f3720_defconfig (Benjamin)
- Update DTS for Thecus N2350 board (Tony)
- Add "old" Marvell DDR3 training for Armada 38x and Turris Omnia
(Marek)
- Misc turris_omnia changes (Marek)
CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/21504
- Fixes for i.MX8M and i.MX93 clk-composite.
- Set CAN oscillator frequency based on model on verdin-imx8mm.
- Enable CAAM for phycore-imx8mp_defconfig.
- Miscellaneous improvements for Gateworks i.MX8M boards.
- Fix initramfs boot on msc_sm2s_imx8mp.
- Fixe EQoS on imx8mp-beacon-kit.
- Fix error message in fsl_esdhc_imx.
Currently, Armada 8k config header is setting boot devices and including
<config_distro_bootcmd.h> regardless of the CONFIG_DISTRO_DEFAULTS being
enabled or not, thus populating the environment for distro boot even on
devices that have no need for it.
So, lets simply respect the value of CONFIG_DISTRO_DEFAULTS.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Make public the clk_fetch_parent_index and rename it. This allow
us to be reused in driver specialization
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Booting an initramfs with the current initrd_addr address may lead to
initramfs corruption and boot failure.
Fix the initramfs problem by applying the following layout
suggested by Tom Rini:
loadaddr=0x40480000 --> Gets moved to 0x40600000 in run-time:
Uncompressing Kernel Image
Moving Image from 0x40480000 to 0x40600000, end=41e80000
fdt_addr_r= moved loadaddr + 128 MiB = 0x48600000
initrd_addr=fdt_addr_r + 512 KiB = 0x48680000
Signed-off-by: Fabio Estevam <festevam@denx.de>
Tested-by: Stefano Babic <sbabic@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
Now that the release has happened, bring back the update to zlib.
This reverts commit bbacdd3ef7762fbdeab43ceea5205d1fd0f25bbd.
Signed-off-by: Tom Rini <trini@konsulko.com>
This patch fixes the I225 hardware default value
at 0x15FD meaning empty flash image
or the NVM configuration loading failed
Signed-off-by: Marjolaine Amate <marjolaine.amate@odyssee-systemes.fr>
This patch adds support for Intel Foxville I226
devices LM,V,I,K in e1000 driver.
Signed-off-by: Marjolaine Amate <marjolaine.amate@odyssee-systemes.fr>
Some operating systems (e.g. seL4) and embedded applications are ELF
images. It is convenient to use FIT-images to implement trusted boot.
Added "elf" image type for booting using bootm command.
Signed-off-by: Maxim Moskalets <maximmosk4@gmail.com>
Various minor fixes and improvements:
* Fix Qualcomm SPMI v5 support
* Move default environment to a file
* Add support for special pins (e.g ufs/mmc reset/data pins)
* IPQ moves to OF_UPSTREAM and receives some cleanup and MAINTAINERS
changes
* Add a reset driver for devices without PSCI
* msm8916 USB clock improvements for mobile devices
Introduce .ops for USB_GADGET_GENERIC uclass. The first new ops is
.handle_interrupts which must be implemented by DM capable USB gadget
controller drivers and must implement interrupt handling similar to
dm_usb_gadget_handle_interrupts(). This patch currently provides weak
dm_usb_gadget_handle_interrupts() implementation which is overridden by
the drivers, but this will be removed once conversion to handle_interrupts
callback is complete.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # vim3
Link: https://lore.kernel.org/r/20240614005309.34433-2-marek.vasut+renesas@mailbox.org
[mkorpershoek: fixed trivial typo in commit message]
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Make use of CONFIG_DEFAULT_ENV_FILE and move the default qcom
environment to a file under board/qualcomm.
This is much cleaner and means we don't need to recompile on changing
the environment.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
The Lenovo IdeaPad Yoga 11 is a hybrid laptop/tablet Windows RT-based
computer released in late 2012. The device uses a 1.3 GHz quad-core
Nvidia Tegra 3 chipset with 2 GB of RAM, features a 11.6 inch 1366x768
screen and 32/64 GB of internal memory that can be supplemented with
a microSDXC card slot, full size SD card slot and 2 full size USB 2.0
ports.
Tested-by: Jethro Bull <jethrob@hotmail.com>
Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Surface RT is a hybrid tablet computer developed and manufactured
by Microsoft and shipped with Windows RT. The tablet uses a 1.3 GHz
quad-core Nvidia Tegra 3 chipset with 2 GB of RAM, features 10.8
inch 1366x768 screen and 32/64 GB of internal memory that can be
supplemented with a microSDXC card giving up to 200 GB of
additional storage.
Tested-by: Jethro Bull <jethrob@hotmail.com>
Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
WEXLER Tab 7t is a mini tablet computer developed by WEXLER that
runs the Android operating system. The device features a 7.0-inch
(180 mm) HD display, an Nvidia Tegra 3 quad-core chip, 1 GB of RAM,
8, 16 or 32 GB of storage that can be supplemented with a microSDXC
card giving up to 64 GB of additional storage and a full size USB
port.
Tested-by: Maksim Kurnosenko <asusx2@mail.ru>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
The Asus Eee Pad Transformer family are 2-in-1 detachable/slider
tablets developed by Asus that run the Android operating system.
The Eee Pad Transformers feature a 10.1-inch (260 mm) display,
an Nvidia Tegra 2 dual-core chip, 1 GB of RAM, and 16/32 GB of storage.
Transformers board derives from Nvidia Ventana development board.
This patch brings support for all 3 known T20 Transformers:
- Asus Eee Pad Transformer TF101
- Asus Eee Pad Transformer TF101G
- Asus Eee Pad Slider SL101
Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101
Tested-by: Antoni Aloy Torrens <aaloytorrens@gmail.com> # ASUS TF101
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
This ensures that the device can boot from a USB device prior to MMC. Useful
cases are when installing a new OS from USB while MMC still has a working OS
configuration or if the OS configuration is broken in late boot stages
(kernel boots but the system does not start).
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Jiaxun Yang <jiaxun.yang@flygoat.com> says:
Hi all,
This series enabled qemu-xtensa board.
For dc232b CPU it needs to be built with toolchain[1].
This is a side product of me investigating architectures
physical address != virtual address in U-Boot. Now we can
get it covered under CI and regular tests.
VirtIO devices are not working as expected, due to U-Boot's
assumption on VA == PA everywhere, I'm going to get this fixed
later.
My Xtensa knowledge is pretty limited, Xtensa people please
feel free to point out if I got anything wrong.
Thanks
[1]: https://github.com/foss-xtensa/toolchain/releases/download/2020.07/x86_64-2020.07-xtensa-dc232b-elf.tar.gz
The dm_root_f field seems to be entirely write-only and hence
redundant, unless 'git grep' fails to find some access generated via
preprocessor token concatenation or similar.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Simon Glass <sjg@chromium.org>
This series brings our zlib code more up to date. However, it drops an
important performance improvement that is required on some of our
supported platforms in order to boot Linux before the watchdog resets
the system. Furthermore, the "post increment" version of this
performance loop was not tested, so while we can fix it, it would then
require re-testing all platforms. At this point in time, we will revert
updating zlib (which has had a potential security issue since 2016) and
fix this in the v2024.10 release.
This reverts commit 4914263c9a14315390d3ccc4816cf3a94cfd156d, reversing
changes made to ef8ef5f77c9a998f76a48277a883af1645b54117.
Reported-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Tom Rini <trini@konsulko.com>
Documentation:
Update requirements.txt to use current Python module versions
Add a page describing debugging U-Boot with GDB
FIT: describe data-size as a conditionally mandatory property
Correct link to FIT specification in SPL code.
Correct kaslrseed command long text description
UEFI:
Add unit test checking that don't have kaslr-seed when measuring boot
Deduplicate code for measured boot.
Other:
Print size information in fwu command
-----BEGIN PGP SIGNATURE-----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=7g5n
-----END PGP SIGNATURE-----
Merge tag 'efi-2024-10-rc1' of https://source.denx.de/u-boot/custodians/u-boot-efi into next
Pull request efi-2024-10-rc1
Documentation:
Update requirements.txt to use current Python module versions
Add a page describing debugging U-Boot with GDB
FIT: describe data-size as a conditionally mandatory property
Correct link to FIT specification in SPL code.
Correct kaslrseed command long text description
UEFI:
Add unit test checking that don't have kaslr-seed when measuring boot
Deduplicate code for measured boot.
Other:
Print size information in fwu command
Simon reports that after enabling all algorithms on the TPM some boards
fail since they don't have enough storage to accommodate the ~5KB growth.
The choice of hash algorithms is determined by the platform and the TPM
configuration. Failing to cap a PCR in a bank which the platform left
active is a security vulnerability. It might allow unsealing of secrets
if an attacker can replay a good set of measurements into an unused bank.
If MEASURED_BOOT or EFI_TCG2_PROTOCOL is enabled our Kconfig will enable
all supported hashing algorithms. We still want to allow users to add a
TPM and not enable measured boot via EFI or bootm though and at the same
time, control the compiled algorithms for size reasons.
So let's add a function tpm2_allow_extend() which checks the TPM active
PCRs banks against the one U-Boot was compiled with. We only allow
extending PCRs if the algorithms selected during build match the TPM
configuration.
It's worth noting that this is only added for TPM2.0, since TPM1.2 is
lacking a lot of code at the moment to read the available PCR banks.
We unconditionally enable SHA1 when a TPM is selected, which is the only
hashing algorithm v1.2 supports.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org> # chromebook-link
This function was used on measured boot to retrieve the number of active
PCR banks and was designed to work with the TCG protocols.
Since we now have the need to retrieve the active PCRs outside the
measured boot context -- e.g use the in the command line, decouple the
function.
Create one that will only adheres to TCG TSS2.0 [0] specification called
tpm2_get_pcr_info() which can be used by the TPM2.0 APIs and a new one that
is called from the measured boot context called tcg2_get_pcr_info()
[0] https://trustedcomputinggroup.org/wp-content/uploads/TSS_Overview_Common_Structures_Version-0.9_Revision-03_Review_030918.pdf
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The previous patch is moving the TPM TCG headers in their own file for
a cleaner API. Move the functions in their own file as well.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
commit 97707f12fdab ("tpm: Support boot measurements") moved out code
from the EFI subsystem into the TPM one to support measurements when
booting with !EFI.
Those were moved directly into the TPM subsystem and in the tpm-v2.c
library. In hindsight, it would have been better to move it in new
files since the TCG2 is governed by its own spec, it's overeall cleaner
and also easier to enable certain parts of the TPM functionality.
So let's start moving the headers in a new file containing the TCG
specific bits.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
commit 97707f12fdab ("tpm: Support boot measurements") moved some of the
EFI TCG code to the TPM subsystem. Those definitions are now in tpm-v2.h.
Let's remove the stale entries
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
