Enable OF_UPSTREAM for AM625-beagleplay board. Remove DT files that
are now available in dts/upstream. Update the appended files based on
version of latest OF_UPSTREAM sync point (v6.10-rc1).
Signed-off-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
At this point in the DM migration, all platforms enable DM. BLK requires
DM. Make BLK "def_bool y" in the cases it had been "default y" to make
this clearer. Now remove the symbol requirement from other places as it
is redundant here.
Signed-off-by: Tom Rini <trini@konsulko.com>
As this is an SPL related driver, and in SPL enabling SPL_BLK is
optional, make this depend on the correct symbol.
Signed-off-by: Tom Rini <trini@konsulko.com>
The BLK symbol is used both for "we have a block device subsystem
enabled" and "we need to utilize the block device library functions". In
the case of efi_loader, it is the case of "we need to utilize the block
device library", so select rather than depends on it. In turn, also
disable EFI_LOADER on platforms which did not have it on previously due
to a lack of block devices. They can enable it themselves if desired.
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Disable support for unused OSes as Linux is the primary target.
Disable support for bootz as zImage isn't a format compatible with
Aarch64 machines so it should never be attempted to be booted.
Enable a bunch of commands:
- erofs
- gpio
- squashfs
that could be useful and are also found in Jaguar and Tiger defconfigs.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
RK3588 Jaguar and Tiger, and RK3399 Puma use standard boot with the full
feature set, so let's do that as well for PX30 Ringneck.
Disable support for unused OSes as Linux is the primary target.
Enable a bunch of commands:
- boot/bootd
- erofs
- gpio
- iminfo
- imxtract
- itest
- pmic
- regulator
- sleep
- squashfs
that could be useful and are also found in Jaguar and Tiger defconfigs.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The RK3588-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230
connector) system-on-module from Theobroma Systems, featuring the
Rockchip RK3588.
It provides the following feature set:
* up to 16GB LPDDR4x
* on-module eMMC
* SD card (on a baseboard) via edge connector
* Gigabit Ethernet with on-module GbE PHY
* HDMI/eDP
* MIPI-DSI
* 4x MIPI-CSI (3x on FPC connectors, 1x over Q7)
* HDMI input over FPC connector
* CAN
* USB
- 1x USB 3.0 dual-role (direct connection)
- 2x USB 3.0 host + 1x USB 2.0 host
* PCIe
- 1x PCIe 2.1 Gen3, 4 lanes
- 2xSATA / 2x PCIe 2.1 Gen1, 2 lanes
* on-module ATtiny816 companion controller, implementing:
- low-power RTC functionality (ISL1208 emulation)
- fan controller (AMC6821 emulation)
* on-module Secure Element with Global Platform 2.2.1 compliant
JavaCard environment
The support is added for Tiger on Haikou devkit, similarly to RK3399
Puma and PX30 Ringneck.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Apart from the host-only usb3 controller (host2) the rk3588 also provides
two dual-role controllers. On the Tiger-Haikou combination these are
connected to the lower usb3-host port in host-only mode and the micro-usb3
port for dual-role operation.
Add the necessary controllers, phys to the Tiger-Haikou board and enable
the usb-id extcon.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240422163951.2604273-4-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: d7b83921d098bd76623381f75f5cd2296f1315cc ]
(cherry picked from commit 193d3b2a0a98f2dcd8c43bcbf8a766098a9fa75d)
The Q7 standard specifies a usb-id pin on the connector to distiuish
between host and device mode. Model this via the usb-id extcon binding.
While the pin is part of the Q7 standard, so part of the module, the
extcon stays disabled in the som dtsi and will only be enabled in a
baseboard using it.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240422163951.2604273-3-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: eabb53f5dacfd643b5255f35bad30b8f914decdc ]
(cherry picked from commit 4843cec4092318ef7feb0999b0d34ef817465b33)
The comment for the host2_xhci points to the wrong port on the board.
The upper usb3 port is the correct one, so fix the comment to prevent
confusion.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240422163951.2604273-2-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: 3482efee1144262dc839792103e6a9e29defecbc ]
(cherry picked from commit 56f3031edf22d163f10bc4b631d37a9aaa82d4d4)
gpio_pwrctrl2 gets duplicated by both rk806_dvs1_null and rk806_dvs2_null
gpio_pwrctrl1 is unset. This typo appears in multiple files. Let's fix them.
Note: I haven't had the chance to test them all because I don't own all
of these boards (obviously). Please test if it's needed.
Signed-off-by: Jing Luo <jing@jing.rocks>
Link: https://lore.kernel.org/r/20240420130355.639406-1-jing@jing.rocks
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: d7f2039e5321636069baa77ef2f1e5d22cb69a88 ]
(cherry picked from commit cb2b6d1d19ed10fcaec5f5859c08a3355d1c66e0)
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The association of uart2 to the q7-uart pins is part of the module
itself and not the baseboard used. Therefore move the pinctrl over
to the tiger dtsi.
Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de>
Reviewed-by: Quentin Schulz <quentin.schulz@theobroma-systems.com>
Link: https://lore.kernel.org/r/20240422143356.2596414-1-heiko@sntech.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: 5adbad5c464a708a87cf5ade1bfe2ca947bb2f82 ]
(cherry picked from commit f8314a4fbc00a3d651a7e9b4d9462d10c6c02a12)
Ringneck was mistakenly set to allow up to 128KiB for the TPL code size
while PX30 SoC only has 16KiB of SRAM.
Therefore, let's use the default value of TPL_MAX_SIZE from the SoC
(which is 10KiB) so that the max code size is actually checked and
useful.
Fixes: c925be73a0a8 ("rockchip: add support for PX30 Ringneck SoM on Haikou Devkit")
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
The ID of the PMIC is stored in the 2 16b registers but the only part
that matters right now is the 3 MSB, which make the 3 digits (in hex) of
the part number.
Right now, only RK808 was properly displayed, with this all currently
supported PMICs should display the proper part number.
Additionally, when the PMIC variant is not found, print that value
instead of the masked unshifted value as all PMICs we support for now
have their LSB ignored to represent the actual part number.
Tested on RK806 (RK3588 Jaguar), RK808 (RK3399 Puma) and RK809 (PX30
Ringneck).
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
On px30-ringneck the FIT payload is located at sector 0x200 compared to
the more Rockchip common sector 0x4000 offset:
SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR=0x200
Because FIT payload is located at sector 0x200 and the TPL+SPL is
located at sector 64, the combined size of TPL+SPL cannot take up more
than 224KiB:
(0x200 - 64) x 512 = 0x38000 (224 KiB)
Adjust SPL_PAD_TO to match the used 0x200 sector offset.
While at it, update the px30-ringneck-u-boot.dtsi to remove the now
unnecessary override of simple-bin:fit:offset since SPL_PAD_TO matches
with the current formula.
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Since commit 6007b69d544e ("rockchip: rk3399-puma: Update SPL_PAD_TO
Kconfig option"), SPL_PAD_TO matches
(CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR - 64) * 512 and the default
value for simple-bin:fit:offset in rockchip-u-boot.dtsi is
SPL_PAD_TO, so let's remove this override.
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
CONFIG_ENV_OFFSET already defaults to 0x3F8000, however it is stored in
lowercase hexdigits instead of uppercase like in the defconfig.
No change in behavior intended.
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
The default env size is 0x8000 when building for Rockchip SoCs with
support for environment stored in MMC.
Jaguar hasn't entered mass production just yet, so it's a breaking
change we can afford in the name of consistency.
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
ArmSoM Sige7 is a Rockchip RK3588 based SBC (Single Board Computer) by
ArmSoM.
There are two variants depending on the DRAM size : 8G and 16G.
Specification:
Rockchip Rk3588 SoC
4x ARM Cortex-A76, 4x ARM Cortex-A55
8/16GB memory LPDDR4x
Mali G610MC4 GPU
2x MIPI CSI 2 multiple lanes connector
64GB/128GB on board eMMC
uSD slot
1x USB 2.0 Type-A, 1x USB 3.0 Type-A, 1x USB 3.0 Type-C
1x HDMI 2.1 output
2x 2.5 Gbps Ethernet port
40-pin IO header including UART, SPI and I2C
USB PD over USB Type-C
Size: 92mm x 62mm
Kernel commit:
81c828a67c78 (arm64: dts: rockchip: Add ArmSom Sige7 board)
Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
After we sync USB3 DRD nodes from v6.10-rc1, these obsolete nodes
can be removed.
Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The mmu600_pcie is connected with the five PCIe controllers.
The mmu600_php is connected with the USB3 controller, the GMAC
controllers, and the SATA controllers.
See 8.2 Block Diagram, in rk3588 TRM (Technical Reference Manual).
The IOMMUs are disabled by default, as further patches are needed to
program the SID/SSIDs in to the IOMMUs.
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: strict mode
arm-smmu-v3 fc900000.iommu: ias 48-bit, oas 48-bit (features 0x001c1eaf)
arm-smmu-v3 fc900000.iommu: allocated 65536 entries for cmdq
arm-smmu-v3 fc900000.iommu: allocated 32768 entries for evtq
arm-smmu-v3 fc900000.iommu: msi_domain absent - falling back to wired irqs
Additionally, the IOMMU correctly triggers an IOMMU fault when
a PCIe device performs a write (since the device hasn't been
assigned a SID/SSID):
arm-smmu-v3 fc900000.iommu: event 0x02 received:
arm-smmu-v3 fc900000.iommu: 0x0000010000000002
arm-smmu-v3 fc900000.iommu: 0x0000000000000000
arm-smmu-v3 fc900000.iommu: 0x0000000000000000
arm-smmu-v3 fc900000.iommu: 0x0000000000000000
While this doesn't provide much value as is, having the devices as
disabled in the device tree will allow developers to see that the rk3588
actually has IOMMUs on the SoC.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Link: https://lore.kernel.org/r/20240502140231.477049-2-cassel@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: cd81d3a0695cc54ad6ac0ef4bbb67a7c8f55d592 ]
(cherry picked from commit ea9a34aa0d786cbf4b87f1ba528e69b07219738f)
Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
usb2-phy should be named usb2phy according to the DT binding,
so let's fix it up accordingly.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20240408225109.128953-5-sebastian.reichel@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: 4e07a95f7402de092cd71b2cb96c69f85c98f251 ]
(cherry picked from commit 5a3e4638492497ae81b9bd4a8627f4727e312ccc)
Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Fix the ordering of the main nodes by sorting them alphabetically and
then the ones with a memory address sequentially by that address.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20240406172821.34173-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
[ upstream commit: cbb97fe18e299ece1c0074924c630de6a19b320f ]
(cherry picked from commit bbf7c16f2f1208b96349f6f6648b69cfaa1a482b)
Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Migrate PX30/RK3326 boards that exists in Linux v6.8 to use OF_UPSTREAM.
firefly-px30 is not migrated to OF_UPSTREAM because there's no Device
Tree in the Linux kernel.
Differences between U-Boot's Odroid-Go2 and Linux's are now moved to the
-u-boot.dtsi, though I have a gut feeling that the existing cru
overrides aren't necessary (anymore?).
The U-Boot GPIO led-0 is on GPIO0_C1 but such is the pin of PWM3 which
is used for Linux's PWM led-2 so keep Linux's.
I also doubt vcc_cam is actually used, though the Odroid-Go2 Black
Edition uses this dcdc regulator for WiFi, so let's just move it to the
-u-boot.dtsi to play it safe.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
In the Device Tree, UART5 is the system UART, but in the defconfig it
currently is UART2. Let's sync the two by making the defconfig use UART5
as well.
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
In order to be able to properly mux UART on PX30 EVB, the pinmux needs
to be done at runtime, so let's not remove the pinctrl nodes from the
SPL DTB.
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
This adds the default pinmux for UART2 and UART5 to the TPL/SPL DTB (if
not removed through the CONFIG_OF_SPL_REMOVE_PROPS symbol) as those two
controllers are always made available to all boards.
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
U-Boot proper pre-reloc is currently running out of memory on PX30
Ringneck and it is thus impossible to boot into U-Boot CLI. It is
assumed the same problem can be seen on other PX30 boards though I
cannot guarantee it since I don't have access to them.
Fix this by migrating to the common bss and stack addresses for PX30,
which drastically increases the size of the pre-reloc allocation pool (8
times bigger now). The memory layout in SPL and U-Boot proper now
match the other SoCs' using ROCKCHIP_COMMON_STACK_ADDR.
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
U-Boot proper pre-reloc is currently running out of memory on PX30
Ringneck and it is thus impossible to boot into U-Boot CLI. It is
assumed the same problem can be seen on other PX30 boards though I
cannot guarantee it since I don't have access to them.
Fix this by migrating to the common bss and stack addresses for PX30,
which drastically increases the size of the pre-reloc allocation pool (8
times bigger now). The memory layout in SPL and U-Boot proper now
match the other SoCs' using ROCKCHIP_COMMON_STACK_ADDR.
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
U-Boot proper pre-reloc is currently running out of memory on PX30
Ringneck and it is thus impossible to boot into U-Boot CLI. It is
assumed the same problem can be seen on other PX30 boards though I
cannot guarantee it since I don't have access to them.
Fix this by migrating to the common bss and stack addresses for PX30,
which drastically increases the size of the pre-reloc allocation pool (8
times bigger now). The memory layout in SPL and U-Boot proper now
match the other SoCs' using ROCKCHIP_COMMON_STACK_ADDR.
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
U-Boot proper pre-reloc is currently running out of memory on PX30
Ringneck and it is thus impossible to boot into U-Boot CLI. It is
assumed the same problem can be seen on other PX30 boards though I
cannot guarantee it since I don't have access to them.
Fix this by migrating to the common bss and stack addresses for PX30,
which drastically increases the size of the pre-reloc allocation pool (8
times bigger now). The memory layout in SPL and U-Boot proper now
match the other SoCs' using ROCKCHIP_COMMON_STACK_ADDR.
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Add tests for booting image using tftpboot/pxe boot commands, tftpboot
boot case loads the FIT image into DDR and boots using bootm command
whereas pxe boot cases downloads the pxe configuration file from the
TFTP server and interprets it to boot the images mentioned in the pxe
configurations file.
This test relies on boardenv_* containing configuration values including
the parameter 'pattern'. tftpboot/pxe boot cases boots the Linux till the
boot log pattern value is matched. For example, if the parameter
'pattern' is defined as 'login:', it will boot till login prompt.
Signed-off-by: Love Kumar <love.kumar@amd.com>
Tested-by: Tom Rini <trini@konsulko.com>
Executing a u-boot command may raise an error or extra bad pattern,
beyond the default bad patterns. Providing a way to enable the console
output error check in test.
For example, description for OS boot test:
import re
check_type = 'kernel_boot_error'
check_pattern = re.compile('ERROR -2: can't get kernel image!')
with u_boot_console.enable_check(check_type, check_pattern):
u_boot_console.run_command('<boot command>')
Signed-off-by: Love Kumar <love.kumar@amd.com>
commit dfeb4f0d7935 ("cmd: bcb: extend BCB C API to allow read/write the fields")
introduced the bcb_get() function.
When CONFIG_CMD_BCB=n, that function is stubbed.
The stubbed function has a wrong prototype: value_size arg is missing.
Add the missing argument to fix build when CONFIG_CMD_BCB=n.
Fixes: dfeb4f0d7935 ("cmd: bcb: extend BCB C API to allow read/write the fields")
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Dmitrii Merkurev <dimorinny@google.com>
Reviewed-by: Julien Masson <jmasson@baylibre.com>
Allow extraction of zstd-compressed images from FIT using imxtract
command. This is especially useful when one has to load an image via
some interface (e.g. SPI) rather that just to the memory.
Signed-off-by: Dmitry Gerasimov <di.gerasimov@gmail.com>
When bcmgenet complete to write Rx buffer with the DMA,
some U-Boot commands write data to the buffer directly.
Those write data will become dirty in CPU cache.
After this driver calls free_pkt to the buffer,
the buffer is assigned as the future Rx buffer.
At some point, if bcmgenet writes to a buffer with DMA
and CPU cache flushes dirty data to the buffer,
the buffer is corrupted.
This patch calls flush_dcache_range in free_pkt
to immediately flush the data written by U-Boot command
and prevent data corruption.
This issue can be reproduced using wget on Raspberry Pi4.
If wget receives data larger than
RX_BUF_LENGTH * RX_DESCS = 2048 * 256 bytes,
it will timeout due to data corruption.
In addition, if LOG_DEBUG is enabled in net/tcp.c,
the following error log is output.
TCP RX TCP xSum Error
Signed-off-by: Yasuharu Shibata <yasuharu.shibata@gmail.com>
All ARCH_K3 platforms need about of 2MB of malloc space post
reallocation. Since, this space is allocated from SDRAM, provide a
generous 2MB space by default.
Platforms requiring more than 2MB can override in defconfig as needed.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
The default DM firmware path is non-optional as of now. Make it
optional so that users that choose to provide DM via TI_DM argument
instead of BINMAN_INDIRS can do so without build errors.
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Reviewed-by: Kamlesh Gurudasani <kamlesh@ti.com>
According to [0], raw access to mmc should not have mmcpart in the
entry. This was fixed in k3_dfu_combined.env but k3_dfu.env had been
overlooked.
[0] doc/usage/dfu.rst
Fixes: 53b406369e9d ("DFU: Check the number of arguments and argument string strictly")
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
MAIN_PLL0 has a flag set in DM (Device Manager) that removes its
capability to re-initialise clock frequencies. A72 CPU clock (GTC) and
RGMII has MAIN_PLL3 as their parent which does not have this flag. While
RGMII needs re-initialization to default frequency to be able to get
250MHz with its divider, GTC can not get its required 200MHz with its
dividers. Thus move GTC clock parent on J721S2 from MAIN_PLL3_HSDIV1 to
MAIN_PLL0_HSDIV6. This was already done on CPTS node in kernel which was
similarly affected (linked).
Link: https://lore.kernel.org/all/20230605110443.84568-1-n-francis@ti.com/
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Switch PHY_ANEG_TIMEOUT to CONFIG_PHY_ANEG_TIMEOUT Kconfig symbol.
This removes one more configuration headers option finalizes its
Kconfig symbol conversion. No functional change expected.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Let users configure default auto-negotiation timeout via Kconfig
instead of specifying it in board configuration headers. This is
the first step toward converting this to Kconfig fully, so far the
legacy PHY_ANEG_TIMEOUT in configuration headers takes precedence.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
