Tools should have an option to obtain the version, so add this to the
mkeficapsule tool.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The correct operating mode for the fan is inversed (1). The
previous pwm driver implementation had a bug and the polarity
information was propagated incorrectly to the kernel. The normal (0)
polarity specified in the device tree was incorrectly clearing the
polarity bit in the counter control register. After the bug fix,
setting the polarity to inversed (1) in the device tree will clear
the polarity bit.
Signed-off-by: Vishal Patel <vishal.patel@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/4658ae8576882f5d28ad57ca74a7b798a546ec37.1722241096.git.michal.simek@amd.com
Add "rs485-rts-delay" property to uartps node with delay_rts_before_send
and delay_rts_after_send values as 10ms for rs485 mode on KD240.
10ms rts delay values have been chosen based on testing with rs485
temperature sensor (which is part of the kit) as safe minimum value
for reliable operation at a baud rate of 9600.
Signed-off-by: Manikanta Guntupalli <manikanta.guntupalli@amd.com>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/0e0c4c067236e11f661c1d067017e1ca975c9ddb.1721297721.git.michal.simek@amd.com
Enabled the default utilization of the NFS command on Versal Gen 2
platform to facilitate booting images through the network using
the NFS protocol
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
Link: https://lore.kernel.org/r/20240711165734.1561933-1-prasad.kummari@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Enabled the default utilization of the NFS command on ZynqMP Kria
platforms to facilitate booting images through the network using
the NFS protocol.
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
Link: https://lore.kernel.org/r/20240709042232.860395-1-prasad.kummari@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Versal NET boards has QSPI and OSPI and default bus set to 0
is not working when system is booting out of OSPI which is
controller 1, as fixed aliases are set for all the boards
i.e., QSPI to 0 and OSPI to 1. Add controller autodetection
via spi_get_env_dev().
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240614124811.22945-3-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
This enables boards to choose where to/from the environment
should be saved/loaded. They can then for example support using
the same device (dynamically) from which the bootloader was
launched to load and save env data and do not have to
define CONFIG_ENV_SPI_BUS statically.
In my use case, the environment needs to be on the same device I
booted from. It can be the QSPI or OSPI device.
I therefore would override spi_get_env_dev in the board code,
read the bootmode registers to determine where we booted from
and return the corresponding device index.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240614124811.22945-2-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com> # Move spi_get_env_dev to sf.c
Add support for ISSI 128MB flash IS25LP01GG. This part
supports 4byte opcodes. It also supports dual and quad
read.
Signed-off-by: Prasad Kummari <prasad.kummari@amd.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Link: https://lore.kernel.org/r/20240617041841.1336632-1-prasad.kummari@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Enable setting speed mode using mmc dev commands.
The speed mode is provided as the last argument in these commands
(ex: mmc dev 0 0 10) and is indicated using the index from enum
bus_mode in include/mmc.h. A speed mode can be set if it is enabled
from device tree or from capabilities register
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240708091755.5021-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
If "assigned-clock-rates" property is included in the
device tree, display driver probe is getting failed, as dp_video_ref
till dp_stc_ref clocks are missing from set rate function, adding
them to fix the probe failure.
Signed-off-by: Venkatesh Yadav Abbarapu <venkatesh.abbarapu@amd.com>
Link: https://lore.kernel.org/r/20240711082939.29260-1-venkatesh.abbarapu@amd.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
This change adds support for PCIe connected nvme disk - phyBOARD-Polis
base board.
One needs to call following commands in u-boot:
> pci enum
> nvme scan
> nvme info
And then ones to access proper file system (like fat[ls|load|write],
ext4[ls|load|write]).
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Enable the 'cpu' command to display the CPU info and release CPU core to
run baremetal or RTOS applications.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Enable the 'cpu' command and the depended imx CPU driver to
display the CPU info and release CPU core to run baremetal
or RTOS applications.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Add documentation for the 'cpu' command, taking NXP i.MX 8M Plus
as a example.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add a new subcommand 'release' to bring up a core to run baremetal
and RTOS applications.
For example on i.MX8M Plus EVK, release the LAST core to run a RTOS
application, passing the sequence number of the CPU core to release,
here it is 3:
u-boot=> cpu list
0: cpu@0 NXP i.MX8MP Rev1.1 A53 at 1200 MHz at 31C
1: cpu@1 NXP i.MX8MP Rev1.1 A53 at 1200 MHz at 30C
2: cpu@2 NXP i.MX8MP Rev1.1 A53 at 1200 MHz at 31C
3: cpu@3 NXP i.MX8MP Rev1.1 A53 at 1200 MHz at 31C
u-boot=> load mmc 1:2 c0000000 /hello_world.bin
66008 bytes read in 5 ms (12.6 MiB/s)
u-boot=> dcache flush; icache flush
u-boot=> cpu release 3 c0000000
Released CPU core (mpidr: 0x3) to address 0xc0000000
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Increase one more bit to cover all CPU types. Otherwise it shows
wrong CPU info on some platforms, such as i.MX8M Plus:
U-Boot 2024.04+g674440bc73e+p0 (Jun 06 2024 - 10:05:34 +0000)
CPU: NXP i.MX8MM Rev1.1 A53 at 4154504685 MHz at 30C
Model: NXP i.MX8MPlus LPDDR4 EVK board
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
The cpu_freq stores the current CPU frequency in Hz.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>
Add a new callback release_core to the cpu_ops, which is used to
release a CPU core to run baremetal or RTOS application on a SoC
with multiple CPU cores.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Register ARM A53 core clock for i.MX 8M Mini, Nano and Plus, preparing
for enabling the 'cpu' command, which depends on this to print CPU core
frequency.
Signed-off-by: Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
Instead of using the local imx7s-warp devicetree copies from U-Boot,
convert the imx7s-warp board to OF_UPSTREAM so that the upstream
kernel devicetree can be used instead.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Print clk name in clk_enable and clk_disable. Make sense to know
what clock get disabled/enabled before a system crash or system
hang.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
The function returns the rate of the parent clock, the previous text
made no sense at all.
Fixes: 4aa78300a025 ("dm: clk: Define clk_get_parent_rate() for clk operations")
Signed-off-by: Alexander Dahl <ada@thorsis.com>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Fix a logical inversion of the printed text.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Sean Anderson <seanga2@gmail.com>
Christian Marangi <ansuelsmth@gmail.com> says:
This series doesn't currently change anything and it does add all the
additional OPs to make support of OF_UPSTREAM.
While converting the mt7681/7686/7688/7623/7622 it was notice lots of
discrepancy between the downstream dtsi and the upstream one and the
clock ID between downstream clock ID and upstream clock ID.
Upstream reference clock by names and clock are handled by the
CCF (Common Clock Framework). The same can't be used here as we would
quickly reach the max space allocated before relocation.
The current mediatek clock driver reference all the parents and clocks
with offset from the clk ID related to the different tables.
Discrepancy between clock ID and the order in the clocks table cause
one clock referenced for another or even crash for trying to access
a clock at an offset that doesn't exist.
To handle this and permit use of OF_UPSTREAM, various measure and
changes are done to the mediatek clock driver to support it.
This series have all the generic clock changes. Once this is merged,
series for each SoC will came that will just change files in their
dedicated clock driver. This is to prevent massive patch and to
permit to split series, one for each SoC.
As said at the start, these changes doesn't cause regression and are
just expansion to the current API. Current behaviour is saved in every
possible way (aside from the first 2 patch that fixes latent bugs)
Add support for APMIXED parent in infra MUX. This is the case for mt7622
that reference APMIXED parents for the MUX1_SEL clock.
We assume the second level parent is always APMIXED.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Add support for GATEs for APMIXED OPs. It's possible that some APMIXED
have also gates on top of PLL. This is the case for mt7622. Add support
for this.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Some simple MUX might require flags to specify the parent source.
Implement MUX_FLAGS as a variant of the MUX macro that takes custom
flags as last arg.
Also implement MUX_MIXED_FLAGS for PARENT_MIXED implementation and
MUX_MIXED with no additional flags.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
