If .match_ep() callback returns non-NULL endpoint, immediately check
its usability and if the returned endpoint is usable, stop search and
return the endpoint. Otherwise, continue with best effort search for
usable endpoint.
Currently the code would attempt the best effort search in any case,
which may find another unexpected endpoint. It is likely that the
intention of the original code was to stop the search early.
Fixes: 77dcbdf3c1ce ("usb: gadget: Add match_ep() op to usb_gadget_ops")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # on vim3
Link: https://lore.kernel.org/r/20240609213449.194762-5-marek.vasut+renesas@mailbox.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
The only actually used gadget_is_*() functions are the one for DWC3
used in epautoconf.c usb_ep_autoconfig() and one for MUSB in ether.c.
The DWC3 one should be fixed in some separate patch.
Inline the gadget_is_dwc3() and stop using ifdefs in favor of
IS_ENABLED() macro.
The rest of gadget_is_*() calls in usb_ep_autoconfig() can never
be anything but 0, since those gadgets are not supported in U-Boot,
so remove all that unused code. Remove gadget_chips.h as well.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # on vim3
Link: https://lore.kernel.org/r/20240609213449.194762-4-marek.vasut+renesas@mailbox.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
The bcdDevice field is defined as
|Device release number in binary-coded decimal
in the USB 2.0 specification. We use this field to distinguish the UDCs
from each other. In theory this could be used on the host side to apply
certain quirks if the "special" UDC in combination with this gadget is
used. This hasn't been done as far as I am aware. In practice it would
be better to fix the UDC driver before shipping since a later release
might not need this quirk anymore.
This patch removes the newly unused function. Linux stopped using this
functionality in 2012, remove it from U-Boot as well.
Matching Linux kernel commit:
ed9cbda63d45 ("usb: gadget: remove usb_gadget_controller_number()")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # on vim3
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Link: https://lore.kernel.org/r/20240609213449.194762-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
The bcdDevice field is defined as
|Device release number in binary-coded decimal
in the USB 2.0 specification. We use this field to distinguish the UDCs
from each other. In theory this could be used on the host side to apply
certain quirks if the "special" UDC in combination with this gadget is
used. This hasn't been done as far as I am aware. In practice it would
be better to fix the UDC driver before shipping since a later release
might not need this quirk anymore.
This patch converts this gadget to use the U-Boot version instead of a
random 2 or 3 plus the UDC number. Linux stopped using this functionality
in 2012, remove it from U-Boot as well.
Matching Linux kernel commit:
ed9cbda63d45 ("usb: gadget: remove usb_gadget_controller_number()")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # on vim3
Link: https://lore.kernel.org/r/20240609213449.194762-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
The bcdDevice field is defined as
|Device release number in binary-coded decimal
in the USB 2.0 specification. We use this field to distinguish the UDCs
from each other. In theory this could be used on the host side to apply
certain quirks if the "special" UDC in combination with this gadget is
used. This hasn't been done as far as I am aware. In practice it would
be better to fix the UDC driver before shipping since a later release
might not need this quirk anymore.
This patch converts this gadget to use the U-Boot version instead of a
random 2 or 3 plus the UDC number. Linux stopped using this functionality
in 2012, remove it from U-Boot as well.
Matching Linux kernel commit:
ed9cbda63d45 ("usb: gadget: remove usb_gadget_controller_number()")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Tested-by: Mattijs Korpershoek <mkorpershoek@baylibre.com> # vim3
Link: https://lore.kernel.org/r/20240609213449.194762-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Commit ee1d8aa5ecf7 ("spmi: msm: support controller version 7") broke
support for channels > 128 on v5 controllers, resulting in some
peripherals (like the power button / pon) working but others (like
gpios) reading bogus data.
Correct max_channels for v5 controllers.
Fixes: ee1d8aa5ecf7 ("spmi: msm: support controller version 7")
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Make use of CONFIG_DEFAULT_ENV_FILE and move the default qcom
environment to a file under board/qualcomm.
This is much cleaner and means we don't need to recompile on changing
the environment.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Most devices have buttons exposed via the PMIC, the button polling
therefore triggers a log spam if debug logging is enabled.
Demote these to debug() so that they aren't printed unless LOG_DEBUG is
defined explicitly for this file.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Add the special pins configuration data to allow setup the bias
of the UFS and SDCard pins on the SM8650 SoC.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Add the special pins configuration data to allow setup the bias
of the UFS and SDCard pins on the SM8550 SoC.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Use the previously introduced msm_special_pin_data to setup the special
pins configuration if the SoC driver have them specified.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
In order to help setup pin configuration for special pins (UFS, SDCard),
introduce the msm_special_pin_data struct largely inspired from the
Linux conterpart but with only U-Boot required fields.
This struct is added to the pins_data to allow specifying the special
pins data for each SoC.
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
I2C clocks are not initialized by the SBL, so lets add support for clocks
required by both of the QUP I2C controllers.
BLSP1 AHB clock is already initialized by SBL, but QUP I2C driver is
requesting it so we have to add it to the enable list.
Based off QCS404 clock driver.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Pinctrl drivers were moved to a dedicated directory but the entry was never
updated, so add the pinctrl-ipq4019 driver entry.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
The reset handling was added to the clock drivers but the entry was never
updated, so add the clock-ipq4019 driver instead.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
The separate clock and reset dt-bindings for IPQ40XX were merged into one
recently, but the entry was not updated so do it now.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
We want to use OF_UPSTREAM on IPQ40XX as its well supported upstream, so
lets drop our downstream DTSI.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Now that drivers are compatible enough with the upstream DTS, there is no
reason to not use the upstream DTS, so imply OF_UPSTREAM by default.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Provide basic DRAM info population from DT, cache setting and the
board_init stub.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Acked-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Number of Qualcomm ARMv7 SoC-s did not use PSCI but rather used PSHOLD
(Qualcomm Power Supply Hold Reset) bit to trigger reset or poweroff.
Qualcomm IPQ40XX is one of them, so provide a simple sysreset driver based
on the upstream Linux one, it is DT compatible as well.
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
This seems to be necessary on my samsung-a5. Without this patch, the
first access of EHCI registers causes a bus stall and subsequent reset.
I am unsure why this wasn't already necessary for db410c, perhaps those
clocks are already enabled on boot.
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Sam Day <me@samcday.com>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
The newer "register map for simple gate clocks" support added for qcom
clocks is used. As a result gcc_apq8016 now has a mixture of the old and
new styles. I didn't (and still don't!) feel comfortable enough in this
area to update the existing code.
Signed-off-by: Sam Day <me@samcday.com>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Enable the clock/pinctrl drivers for these two SoCs. Previously left out
due to only being used on the db410c and db820c respectively which both
have their own board code. We can still boot these with most features
working without that board code.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Sam Day <me@samcday.com>
The Lenovo IdeaPad Yoga 11 is a hybrid laptop/tablet Windows RT-based
computer released in late 2012. The device uses a 1.3 GHz quad-core
Nvidia Tegra 3 chipset with 2 GB of RAM, features a 11.6 inch 1366x768
screen and 32/64 GB of internal memory that can be supplemented with
a microSDXC card slot, full size SD card slot and 2 full size USB 2.0
ports.
Tested-by: Jethro Bull <jethrob@hotmail.com>
Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Surface RT is a hybrid tablet computer developed and manufactured
by Microsoft and shipped with Windows RT. The tablet uses a 1.3 GHz
quad-core Nvidia Tegra 3 chipset with 2 GB of RAM, features 10.8
inch 1366x768 screen and 32/64 GB of internal memory that can be
supplemented with a microSDXC card giving up to 200 GB of
additional storage.
Tested-by: Jethro Bull <jethrob@hotmail.com>
Signed-off-by: Jonas Schwöbel <jonasschwoebel@yahoo.de>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
WEXLER Tab 7t is a mini tablet computer developed by WEXLER that
runs the Android operating system. The device features a 7.0-inch
(180 mm) HD display, an Nvidia Tegra 3 quad-core chip, 1 GB of RAM,
8, 16 or 32 GB of storage that can be supplemented with a microSDXC
card giving up to 64 GB of additional storage and a full size USB
port.
Tested-by: Maksim Kurnosenko <asusx2@mail.ru>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
The Asus Eee Pad Transformer family are 2-in-1 detachable/slider
tablets developed by Asus that run the Android operating system.
The Eee Pad Transformers feature a 10.1-inch (260 mm) display,
an Nvidia Tegra 2 dual-core chip, 1 GB of RAM, and 16/32 GB of storage.
Transformers board derives from Nvidia Ventana development board.
This patch brings support for all 3 known T20 Transformers:
- Asus Eee Pad Transformer TF101
- Asus Eee Pad Transformer TF101G
- Asus Eee Pad Slider SL101
Tested-by: Robert Eckelmann <longnoserob@gmail.com> # ASUS TF101
Tested-by: Antoni Aloy Torrens <aaloytorrens@gmail.com> # ASUS TF101
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
This ensures that the device can boot from a USB device prior to MMC. Useful
cases are when installing a new OS from USB while MMC still has a working OS
configuration or if the OS configuration is broken in late boot stages
(kernel boots but the system does not start).
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Use existing nvidia,head device tree property to get DC controller id.
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Jiaxun Yang <jiaxun.yang@flygoat.com> says:
Hi all,
This series enabled qemu-xtensa board.
For dc232b CPU it needs to be built with toolchain[1].
This is a side product of me investigating architectures
physical address != virtual address in U-Boot. Now we can
get it covered under CI and regular tests.
VirtIO devices are not working as expected, due to U-Boot's
assumption on VA == PA everywhere, I'm going to get this fixed
later.
My Xtensa knowledge is pretty limited, Xtensa people please
feel free to point out if I got anything wrong.
Thanks
[1]: https://github.com/foss-xtensa/toolchain/releases/download/2020.07/x86_64-2020.07-xtensa-dc232b-elf.tar.gz
Introduce the board and provide instructions on how to get
it work.
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
It is required to get it xtensa OF_UPSTREAM work.
Reviewed-by: Sumit Garg <sumit.garg@linaro.org>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Implement various CPU related functions.
I'm actually just using it to get cpu clock frequency.
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Add xtensa semihosting driver.
It can't use regular semihosting driver as Xtensa's has it's own
semihosting ABI.
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
They are all directly imported from Linux kernel.
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
For PTP_MMU our physical address is not directly mapped
into virtual address space, we need to access physical
memory from those fixed map segments.
Implement phys_to_virt and virt_to_phys hook to reflect
this setting.
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
So U-Boot is using _end symbol to detect location of devicetree
appended at the end of the ROM.
It needs to be calculated based on end of .data load address,
as in our lds .current address is address in RAM.
Tested-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Both GitLab and Azure (and other CI systems) have native support for
displaying JUnitXML test report results. The pytest framework that we
use can generate these reports. Change our CI tests so that they will
generate these reports and then have the respective CI platform pick
them up. We write to different locations because of where each CI is
(and isn't) able to easily pass things along.
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
On tests which require "tftpboot" we need to depend not on cmd_net but
rather cmd_tftpboot. And on tests which require cmd_pxe we do not need
to also depend on cmd_net as this should be handled already via Kconfig
logic.
Signed-off-by: Tom Rini <trini@konsulko.com>
Simon Glass <sjg@chromium.org> says:
This series includes a number of mostly unrelated changes which are in
service of running U-Boot on a lab using Labgrid.
