Add a function to show the stats, so we can decide when to print it.
This slightly adjusts the output, so that any 'test not found' message
appears on its own line after all other output.
The 'failures' message now appears in lower case so update pytest
accordingly.
Signed-off-by: Simon Glass <sjg@chromium.org>
This is useful information and is not always the same as the 'count' arg
to ut_run_list() so add it as a separate stat.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use a struct to hold the stats, since we also want to have the same
stats for all runs as we have for each suite.
Signed-off-by: Simon Glass <sjg@chromium.org>
Update this function to access a unit-test state, so that the caller can
collect results from running multiple suites.
Signed-off-by: Simon Glass <sjg@chromium.org>
This is not needed anymore. If a test suite is not built, then it will
have no linker-list entries. So we can just check for that and know that
the suite is not present.
This allows removal of the #ifdefs and the need to keep them in sync
with the associated Makefile rules, which has actually failed, since the
help does not match what commands are actually present.
Signed-off-by: Simon Glass <sjg@chromium.org>
The 'info' test is not a real test. With the new suite array we can drop
this and the associated special-case code.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use the new suite-runner to run these tests instead.
It is not clear that these actually work, since they are not enabled on
sandbox for some reason.
Signed-off-by: Simon Glass <sjg@chromium.org>
Use the new suite-runner to run these tests instead.
It is not clear that these actually work, since they are not enabled on
sandbox for some reason.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
The current cmd_ut_sub[] array was fine when there were only a few test
suites. But is quite unwieldy now:
- it requires a separate do_ut_xxx for each suite, even though the code
for most is almost identical
- running more than one suite requires running multiple commands, and
there is no record of which suites passed or failed
- 'ut all' runs all suites but reports their results individually
- we need lots of #ifdefs in the array, mirroring those in the makefile
but maintained in a separate place
In fact the tests are all in the same linker list. The suites are
grouped, so it is possible to access the information without a command.
Introduce a 'suite' array, which holds the cmd_ut_...() function to
call, but can also support running a suite without that function. This
means that the array of struct cmd_tbl is transformed into an array of
'struct suite'.
This will allow removal of many of the functions, particularly those
without test-specific init.
Signed-off-by: Simon Glass <sjg@chromium.org>
Most test suites have a _test suffix. This is not necessary as there is
also a ut_ prefix.
Drop the suffix so that (with future work) the suite name can be used as
the linker-list name.
Remove the suffix from the pytest regex as well, moving it to the top of
the file, as it is a constant.
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a Python test which runs 'ut all' and then checks that the expected
suites are present and all tests in each suite are run.
This can help to check that nothing is missing.
Update 'ut info' to ignore the 'all' suite when counting the number of
suites, since that is really just a combination of all the other suites.
Adjust the message for skipped tests so that appears even if no
particular test was selected. This helps the new 'test_suite' test see
what is going on.
Signed-off-by: Simon Glass <sjg@chromium.org>
It is helpful to see a list of available suites. At present this is
handled by the longhelp for the 'ut' command, but this is not in a
format which can be easily parsed by python tests.
Add a -s option to show this. At present it is not possible to show the
number of tests in each suite, but future work will address this. For
now, show a ?
Signed-off-by: Simon Glass <sjg@chromium.org>
Some suites have a different name from that used in the linker list.
That makes it hard to programmatically match the name printed when the
suite runs to the linker-list name it has.
Update the names so they are the same.
Signed-off-by: Simon Glass <sjg@chromium.org>
A few messages lack a newline so the test output shows the next
test-name on the same line. For example:
Beware: this test sets local variable dollar_bar and dollar_quux
and they cannot be unset!Test: hush_test_env_dollar: dollar.c
This is confusing, so fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
A limitation of most linker_list macros is that they cannot easily be
used in data structures. This is because they include code inside their
expressions.
Provide a way to support this, with new ll_start_decl() and
ll_end_decl() macros.
Signed-off-by: Simon Glass <sjg@chromium.org>
Move these operations into separate functions so that it is clearer what
is needed. These functions can also be called from somewhere other than
ut_run_list().
Signed-off-by: Simon Glass <sjg@chromium.org>
The string conversion functions are implemented in lib/strto.c which is
only compiled if CONFIG_STRTO=y.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
This config is causing conflicts with how fdtfile variable is
initialized.
For K3 devices, CONFIG_DEFAULT_DEVICE_TREE= "ti/k3-<board>.dtb".
With CONFIG_TI_FDT_FOLDER_PATH also prefixing "ti", fdtfile is then
"ti/ti/k3-<board>.dtb". This variable is updated when fitImage is
booted and fails to boot due to the parsing error "ti/ti/".
Given that there are no other users of this config other than K3 for
now, it is being removed.
Since am64x, j721e and j721s2 also define a DEFAULT_FDT_FILE, update
them to conform to the DEFAULT_DEVICE_TREE standard.
Signed-off-by: Aashvij Shenai <a-shenai@ti.com>
Replace Maximumm with Maximum in Kconfig symbol description, fix a typo.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Michal Simek <michal.simek@amd.com>
CI: https://source.denx.de/u-boot/custodians/u-boot-dfu/-/pipelines/24323
Android:
- Fix kcmdline null pointer dereference (reported by coverity and
multiple users)
- Move Igor to reviewers instead of maintainers for avb/ab
- Fix booting Android with AVB built-in, but disabled via
fastboot flash --disable-verity vbmeta vbmeta.img
1. Bug fixed for doorbell in secure device manager mailbox driver
2. Enhancement on SoCFPGA dwc_eth_xgmac driver
3. Enhancement on DW MAC driver
4. Improved the error message and status for SoC64 device FPGA
configuration driver
5. Updated existing watchdog in system manager to support new SM device
Currently the FPGA reconfig status only return a single error status
which make the debugging of FPGA reconfiguration hard.
This patch is to expose the error status, major error code and
minor error code, for the FPGA reconfig to upper layer app.
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
This patch adds support for configuring the ethernet MAC mode independently
from the PHY mode on our SoC FPGA board. Specifically, this is necessary
for a scenario where the ethernet controller MAC is connected to the
FPGA HVIO with a different GMII interface, and the FPGA output is routed
to the PHY using a RGMII interface.
To support this configuration, a mechanism is introduced to handle
separate MAC mode settings, ensuring that the MAC controller and PHY
can operate correctly with their respective interface modes.
If mac-mode is not defined, the MAC mode will default to the PHY mode,
ensuring compatibility and proper operation between the MAC and PHY.
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
Agilex5 having several ethernet instance, adding the device
name at the error message to differentiate between which
instance is having issue.
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
An issue was identified where selecting the phy-mode as
rgmii-id in the device tree source (DTS) would cause the
`dwc_eth_xgmac_socfpga` driver to raise an unsupported phy mode error.
From the MAC controller's perspective, the rgmii and rgmii-id
phy modes are effectively identical. To address this, both
modes will now be configured to rgmii in the MAC controller.
This change ensures that the rgmii-id phy mode is properly
supported without error.
Signed-off-by: Boon Khai Ng <boon.khai.ng@intel.com>
Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
This patch adds support for the "rgmii-id", "rgmii-rxid", and
"rgmii-txid" modes for the dwmac_socfpga driver.
Signed-off-by: Rufus Segar <rhs@riseup.net>
