Now that sandbox is using cyclic for video, it trips the 1us time
limit. Updating the sandbox display often takes 20ms or more.
Increase the limit to 100ms to avoid a warning.
Signed-off-by: Simon Glass <sjg@chromium.org>
At present U-Boot flushes the cache after every character written to
the display. This makes the command-line slower, to the point that
pasting in long strings can fail.
Add a cyclic function to sync the display every 10ms. Enable this by
default.
Allow much longer times for sandbox, since the SDL display is quite
slow.
Avoid size growth if the feature is disabled by making the new init and
destroy functions dependent on CYCLIC being enabled.
Signed-off-by: Simon Glass <sjg@chromium.org>
Rather than using a static variable, use the video device's private
data to remember when the last video sync was completed. This allows
each display to have its own sync and avoids using static data in SPL.
Signed-off-by: Simon Glass <sjg@chromium.org>
The cyclic subsystem is currently enabled either in all build phases
or none. For tools this should not be enabled, but since lib/shc256.c
and other files include watchdog.h in the host build, we must make
sure that it is not enabled there.
Add an SPL symbol so that there is more control of this.
Add an include into cyclic.h so that tools can include this file.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Reviewed-by: Stefan Roese <sr@denx.de>
The linux kernel has the list_count_nodes() API functions which is
used for counting nodes of a list. This has now been imported in
U-Boot as part of an earlier commit. Use this function and drop the
list_count_items().
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Use the list_for_each_entry() API to get the efi_mem_list node
directly, instead of making an additional call to list_entry().
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Populate the previous memory descriptor node pointer only after it's
parent struct has been initialised. The compiler fixes this logic to
do the right thing, but it is better to have correct code in place.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Use the API function list_count_nodes() to count the number of EFI
memory map entries.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Add a function to count the nodes of a list.
Taken from linux 6.11-rc1 tag commit 8400291e289e.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
After assigning to *dp we must check this value and not dp.
Addresses-Coverity-ID: 501792 Control flow issues (DEADCODE)
Fixes: 58bef195f94e ("cmd: eficonfig: add support for setting fdt")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add initial documentation for the Android bootmeth.
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
U-Boot claims to create SMBIOS 3.7 tables. The type 0 table has
a field Extended BIOS ROM Size since version 3.1.
BIOS ROM sizes of 16 MiB or above must be written to this field.
Add and fill the missing field.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Add an additional search path /dtbs, this is where dtbs are installed on
postmarketOS and potentially other distros.
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
A system has to support booting via the boot manager to be EBBR compliant.
See the reference to variables Boot#### in the specification.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
EFI_IGNORE_OSINDICATIONS is used to ignore OsIndications if setvariable
at runtime is not supported and allow the platform to perform capsule
updates on disk. With the recent changes boards can conditionally enable
setvariable at runtime using EFI_RT_VOLATILE_STORE.
Let's make that visible in our Kconfigs and enable EFI_IGNORE_OSINDICATIONS
when set variable at runtime is disabled.
Since EFI_RT_VOLATILE_STORE needs help from the OS to persist the
variables, allow users to ignore OsIndications even if setvariable at
runtime is enabled.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu> says:
v2 changes:
* Drop sw_blink_state structure, move its necessary fields to
led_uc_plat structure.
* Add cyclic_info pointer to led_uc_plat structure. This
simplify code a lot.
* Remove cyclic function search logic. Not needed anymore.
* Fix blinking period. It was twice large.
* Other cleanups.
v3 changes:
* Adapt code to recent cyclic function changes
* Move software blinking functions to separate file
* Other small changes
v4 changes:
* Refactoring of led_set_period() function
v5 changes
* Fix compilation if CONFIG_LED_BLINK is not defined
v6 changes:
* Enable LEDST_BLINK state unconditionally.
* Function led_set_period() becomes available when CONFIG_LED_BLINK
is disabled. This makes led code simpler.
* Software blinking requires about 100 bytes of data for a led. It's
not a good idea to allocate so much memory for each supported led.
Change the code to allocate blinking data only for required leds.
The standard property
linux,default-trigger = "pattern";
used to get an effect. No blinking parameters can be set yet.
Signed-off-by: Michael Polyntsov <michael.polyntsov@iopsys.eu>
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Simon Glass <sjg@chromium.org>
If hardware (or driver) doesn't support leds blinking, it's
now possible to use software implementation of blinking instead.
This relies on cyclic functions.
Signed-off-by: Michael Polyntsov <michael.polyntsov@iopsys.eu>
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Simon Glass <sjg@chromium.org>
Changes:
* enable LEDST_BLINK state unconditionally
* function led_set_period() becomes available when CONFIG_LED_BLINK
is disabled. This makes led code simpler.
* fix cmd/led.c to work properly when LEDST_BLINK present, but
CONFIG_LED_BLINK is disabled
Signed-off-by: Mikhail Kshevetskiy <mikhail.kshevetskiy@iopsys.eu>
Reviewed-by: Simon Glass <sjg@chromium.org>
binman support for alternate entries
-----BEGIN PGP SIGNATURE-----
iQFFBAABCgAvFiEEslwAIq+Gp8wWVbYnfxc6PpAIreYFAmantZwRHHNqZ0BjaHJv
bWl1bS5vcmcACgkQfxc6PpAIrebZ9wgA2j4eIodu6BvBJvw9WgiXLoX4yt4blKdS
ayvg6YoAYFX/0ZtDx8soeMUJha3o4Qo/hB+ujjpOGM2bdyIQ8zghYsZGm5Sl7uD+
7IAdCDPYpIB4aac+pvD7IBOsQYTW8Oj7XAXJvsLJ69pBzMXf049jY4AcHjD9Vz+H
jZPAGXalgjnrb2Z8V+g/5ju00wBqbwlELZYt5LvYTf8CG/+/scB6HXhTzmdCt76G
EPtQsBuPM5FNgMM52y2QzKButZrFNN+jvhg8gwT0MNVTln2ivF7nnTMt/iiz/AM8
/4ShlkEV9HgNAXeHM7Ggk/8X2LX0ec6oTNpoyKEqAkWfI2hVsETdog==
=LkrJ
-----END PGP SIGNATURE-----
Merge tag 'dm-pull-29jul24' of https://gitlab.denx.de/u-boot/custodians/u-boot-dm
qconfig minor improvement
binman support for alternate entries
Pass CONFIG_OF_SPL_REMOVE_PROPS to binman so that it can remove
properties correctly when producing FITs for SPL phases.
Signed-off-by: Simon Glass <sjg@chromium.org>
When using FIT to load firmware builds for multiple models, the FIT must
include a common binary along with a number of devicetree blobs, one for
each model. This is the same mechanism as is used for loading an OS.
However, SPL builds do not normally use the full devicetree, but instead
a cut-down version which various nodes and properties removed.
Add a new fit,fdt-phase property to allow binman to produce these
devicetree blobs.
Signed-off-by: Simon Glass <sjg@chromium.org>
FIT allows the FDT's root-node compatible string to be placed in a
configuration node to simplify and speed up finding the best match for
booting.
Add a new property to support this.
Signed-off-by: Simon Glass <sjg@chromium.org>
In some cases the list of available FDT files is not available in an
entryarg. Provide an option to point to a directory containing them
instead.
Signed-off-by: Simon Glass <sjg@chromium.org>
FIT provides a way to select between different devicetree blobs
depending on the model. This works fine for U-Boot proper and allows SPL
to select the correct blob for the current board at runtime. The boot
sequence (SPL->U-Boot proper) is therefore covered by the existing
feature set.
The first boot phase (typically TPL) cannot use FIT since SoC boot ROMs
don't currently support it. Therefore the TPL image must be specific to
each model it boots on.
To support booting on mulitple models, binman must therefore produce a
separate TPL image for each model, even if the images for the rest of
the phases are identical.
TPL needs to be packaged as an executable binary along with a reduced
devicetree. When multiple models are supported, a reduced devicetree
must be provided for each model.
U-Boot's build system is designed to build a single devicetree for SPL
builds, so does not support this requirement.
Add a new 'alternatives' feature to Binman, allowing it to automatically
subset a devicetree to produce the reduced devicetree for a particular
phase for each supported model. With this it is possible to produce a
separate TPL image for each of the models. The correct one can then be
loaded onto a board, along with the common FIT image(s).
Signed-off-by: Simon Glass <sjg@chromium.org>
At present the contents of an FDT (for each phase) are fixed,
determined by the build and provided to Binman as input files.
Provide a means for entry types to provide their own FDT, so that it can
be processed, if needed.
Signed-off-by: Simon Glass <sjg@chromium.org>
Binman needs the ability to run fdtgrep to prepare devicetree subsets
for use by SPL and TPL. Add a new bintool in preparation for this.
Signed-off-by: Simon Glass <sjg@chromium.org>
This function has strange indentation. Fix it.
Fixes: 8c1fbd1f607 ("binman: ftest: Add test for u_boot_spl_pubkey_dtb")
Signed-off-by: Simon Glass <sjg@chromium.org>
Add a comment about this entry type being expanded, to match the comment
for SPL and TPL. Drop an unwanted line in the SPL and TPL docs while
here.
Signed-off-by: Simon Glass <sjg@chromium.org>
