Patch keeps the access to dtb_dt_embedded() within fdtdec API,
by means of new API function introduction. This new function is a
common place for updating appropriate global_data fields for
OF_EMBED case.
Also, the consequence of the patch is movement of '___dtb_dt_*begin'
symbols' declaration from header file, because nobody used symbols
outside the lib/fdtdec.c.
Signed-off-by: Evgeny Bachinin <EABachinin@salutedevices.com>
Suggested-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
lmb_alloc_addr_flags() is a wrapper for _lmb_alloc_addr() and it's the
only function using it. Rename _lmb_alloc_addr() to lmb_alloc_addr_flags()
and remove the wrapper.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
lmb_alloc_base() is just calling lmb_alloc_base_flags() with LMB_NONE.
There's not much we gain from this abstraction, so let's remove the
former add the flags argument to lmb_alloc_base() and make the code
a bit easier to follow.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
lmb_alloc_addr() is just calling lmb_alloc_addr_flags() with LMB_NONE
There's not much we gain from this abstraction, so let's remove the
latter, add a flags argument to lmb_alloc_addr() and make the code a
bit easier to follow.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
There's no point defining a function that's called only once just to
avoid passing the flags. Remove the wrapper and just call
lmb_add_region_flags().
Acked-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
free_mem is a misnomer. We never update it with the free memory for
LMB. Instead, it describes all available memory and is checked against
used_mem to decide whether an area is free or not.
So let's rename this field to better match its usage.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
lmb_reserve() is just calling lmb_reserve_flags() with LMB_NONE.
There's not much we gain from this abstraction.
So let's remove the latter, add the flags argument to lmb_reserve()
and make the code a bit easier to follow.
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
LMB flags is not an enum anymore. It's currently used as a bitmask
in various places of our code. So make it a u32 which is more
appropriate when dealing with masks.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
We already have a macro for this. Use it instead of adding yet another
variant for alignment.
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Fix warnings from kernel-doc script. Improve and unify overall style of
kernel-doc comments in lmb source files. Move all kernel-doc comments
for public functions into the header, as recommended in U-Boot
documentation [1]:
Non-trivial functions should have a comment which describes what
they do. If it is an exported function, put the comment in the
header file so the API is in one place. If it is a static function,
put it in the C file.
This also takes care of existing duplication. While at it, do a bit of
cosmetic cleanups as well.
No functional change.
[1] doc/develop/codingstyle.rst
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
flag_str[] is a pointer to const. Make it also a const pointer. Improve
a style a bit while a it, to make this line fit 80 characters limit.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
rgnflags variable in lmb_add_region_flags() has incorrect type: it's
declared as phys_size_t when it should be enum lmb_flags. That
copy-paste mistake was firstly introduced in commit 59c0ea5df33f ("lmb:
Add support of flags for no-map properties"), and then copied further
into commit ed17a33fed29 ("lmb: make LMB memory map persistent and
global"). Fix it by using the correct type to match struct lmb_region
field.
No functional change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Acked-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Simon Glass <sjg@chromium.org> says:
This includes various patches towards implementing the VBE abrec
bootmeth in U-Boot. It mostly focuses on SPL tweaks and adjusting what
fatures are available in VPL.
Link: https://lore.kernel.org/r/20241219182907.2609704-1-sjg@chromium.org
When the initialisation vector is randomly generated, its value shall be
stored in the FIT together with the encrypted data. The changes allow to
store the IV in the FIT also in the case where the key is not stored in
the DTB but retrieved somewhere else at runtime.
Signed-off-by: Paul HENRYS <paul.henrys_ext@softathome.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
This returns a devicetree and updates a parameter with an error code.
Swap it, since this fits better with the way U-Boot normally works. It
also (more easily) allows leaving the existing pointer unchanged.
No yaks were harmed in this change, but there is a very small code-size
reduction.
For sifive, the OF_BOARD option must be set for the function to be
called, so there is no point in checking it again. Also OF_SEPARATE is
defined always.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
[trini: Update total_compute]
Signed-off-by: Tom Rini <trini@konsulko.com>
The condition for receiving a bloblist from TPL is reversed. This was
only noticed are the other fixes landed. Fix it.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Matthias Brugger <mbrugger@suse.com>
include display_options.h to address build warning:
lib/smbios.c: In function ‘smbios_update_version’:
lib/smbios.c:305:9: warning: implicit declaration of function ‘print_buffer’
[-Wimplicit-function-declaration]
print_buffer((ulong)ptr, ptr, 1, old_len + 1, 0);
^~~~~~~~~~~~
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
This reverts commit 1fdf53ace13f745fe8ad4d2d4e79eed98088d555, reversing
changes made to e5aef1bbf11412eebd4c242b46adff5301353c30.
I had missed that this caused too much size growth on rcar3_salvator-x.
Signed-off-by: Tom Rini <trini@konsulko.com>
Simon Glass <sjg@chromium.org> says:
This includes various patches towards implementing the VBE abrec
bootmeth in U-Boot. It mostly focuses on SPL tweaks and adjusting what
fatures are available in VPL.
Link: https://lore.kernel.org/r/20241207172412.1124558-1-sjg@chromium.org
An attempt to add the already added LMB region using
lmb_add_region_flags() ends up in lmb_addrs_overlap() check, which
eventually leads to either returning 0 if 'flags' is LMB_NONE, or -1
otherwise. It makes it impossible for the user of this function to catch
the case when the region is already added and differentiate it from
regular errors. That in turn may lead to incorrect error handling in the
caller code, like reporting misleading errors or interrupting the normal
code path where it could be treated as the normal case. An example is
boot_fdt_reserve_region() function, which might be called twice (e.g.
during board startup in initr_lmb(), and then during 'booti' command
booting the OS), thus trying to reserve exactly the same memory regions
described in the device tree twice, which produces an error message on
second call.
Return -EEXIST error code in case when the added region exists and it's
not LMB_NONE; for LMB_NONE return 0, to conform to unit tests
(specifically test_alloc_addr() in test/lib/lmb.c) and the preferred
behavior described in commit 1d9aa4a283da ("lmb: Fix the allocation of
overlapping memory areas with !LMB_NONE"). The change of
lmb_add_region_flags() return values is described in the table below:
Return case Pre-1d9 1d9 New
-----------------------------------------------------------
Added successfully 0 0 0
Failed to add -1 -1 -1
Already added, flags == LMB_NONE 0 0 0
Already added, flags != LMB_NONE 0 -1 -EEXIST
Rework all affected functions and their documentation. Also fix the
corresponding unit test which checks reserving the same region with the
same flags to account for the changed return value.
No functional change is intended (by this patch itself).
Fixes: 1d9aa4a283da ("lmb: Fix the allocation of overlapping memory areas with !LMB_NONE")
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
In case there are two variables which each implement env callback
that performs env_set() on the other variable, the callbacks will
call each other recursively until the stack runs out. Prevent such
a recursion from happening.
Example which triggers this behavior:
static int on_foo(...) { env_set("bar", 0); ... }
static int on_bar(...) { env_set("foo", 0); ... }
U_BOOT_ENV_CALLBACK(foo, on_foo);
U_BOOT_ENV_CALLBACK(bar, on_bar);
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Suggested-by: Marek Vasut <marex@denx.de>
When MbedTLS TLS features were added MBEDTLS_HAVE_TIME was defined as part
of enabling https:// support. However that pointed to the wrong function
which could crash if it received a NULL pointer.
Looking closer that function is not really needed, as it only seems to
increase the RNG entropy by using 4b of the current time and date.
The reason that was enabled is that lwIP was unconditionally requiring it,
although it's configurable and can be turned off.
Since lwIP doesn't use that field anywhere else, make it conditional and
disable it from our config.
Fixes: commit a564f5094f62 ("mbedtls: Enable TLS 1.2 support")
Reported-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
Building SPL fails with MBEDTLS enabled.
Currently we don't need it there.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Jerome Forissier <jerome.forissier@linaro.org>
There are platforms which set the value of ram_top based on certain
restrictions that the platform might have in accessing memory above
ram_top, even when the memory region is in the same DRAM bank. So,
even though the LMB allocator works as expected, when trying to
allocate memory above ram_top, prohibit this by marking all memory
above ram_top as reserved, even if the said memory region is from the
same bank.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Andreas Schwab <schwab@suse.de>
At the moment the LMB allocator will return 'success' immediately on two
consecutive allocations if the second one is smaller and the flags match
without resizing the reserved area.
This is problematic for two reasons, first of all the new updated
allocation won't update the size and we end up holding more memory than
needed, but most importantly it breaks the EFI SCT tests since EFI
now allocates via LMB.
More specifically when EFI requests a specific address twice with the
EFI_ALLOCATE_ADDRESS flag set, the first allocation will succeed and
update the EFI memory map. Due to the LMB behavior the second allocation
will also succeed but the address ranges are already in the EFI memory
map due the first allocation. EFI will then fail to update the memory map,
returning EFI_OUT_OF_RESOURCES instead of EFI_NOT_FOUND which break EFI
conformance.
So let's remove the fast check with is problematic anyway and leave LMB
resize and calculate address properly. LMB will now
- try to resize the reservations for LMB_NONE
- return -1 if the memory is not LMB_NONE and already reserved
The LMB code needs some cleanup in that part, but since we are close to
2025.01 do the easy fix and plan to refactor it later.
Also update the dm tests with the new behavior.
Fixes: commit 22f2c9ed9f53 ("efi: memory: use the lmb API's for allocating and freeing memory")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The gen_v5_guid() is a void and does no error checking with pointers
being available etc. Instead it expects all things to be in place to
generate GUIDs. If a board capsule definition is buggy and does not
define the firmware names when enabling capsule updates, the board will
crash trying to bring up the EFI subsystem.
Check for a valid firmware name before generating GUIDs.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Given that OF_LIBFDT is library functionality, the feature of EFI_LOADER
needs to select OF_LIBFDT rather than depend on it being already
enabled.
Acked-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
With this pull request support for the EFI_HTTP_PROTOCOL and
EFI_IP4_CONFIG2 protocols are added. This allows EFI applications
to load files via HTTP.
UEFI:
add efi_dp_from_ipv4 function
add efi_net_set_addr, efi_net_get_addr functions
add support for HTTP device path
set EFI bootdevice device path to HTTP when loaded from wget
add support to send http requests and parse http headers
provide EFI_IP4_CONFIG2_PROTOCOL
provide EFI_HTTP_PROTOCOL
support IPv4() in device path to text protocol
provide unit tests for the HTTP and IPv4 Config2 protocols
Network:
zero terminate string with headers in wget_fill_info()
zero terminate string with headers in wget_lwip_fill_info()
pass port and server_name via wget_ctx in lwIP network stack
let wget_with_dns work with dns disabled
Others:
Add HTTP and IPV4 Config II protocols to UUID library functions.
-----BEGIN PGP SIGNATURE-----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=Wa3j
-----END PGP SIGNATURE-----
Merge tag 'efi-next-2024-12-04' of https://source.denx.de/u-boot/custodians/u-boot-efi into next
CI: https://source.denx.de/u-boot/custodians/u-boot-efi/-/pipelines/23707
With this pull request support for the EFI_HTTP_PROTOCOL and
EFI_IP4_CONFIG2 protocols are added. This allows EFI applications
to load files via HTTP.
UEFI:
add efi_dp_from_ipv4 function
add efi_net_set_addr, efi_net_get_addr functions
add support for HTTP device path
set EFI bootdevice device path to HTTP when loaded from wget
add support to send http requests and parse http headers
provide EFI_IP4_CONFIG2_PROTOCOL
provide EFI_HTTP_PROTOCOL
support IPv4() in device path to text protocol
provide unit tests for the HTTP and IPv4 Config2 protocols
Network:
zero terminate string with headers in wget_fill_info()
zero terminate string with headers in wget_lwip_fill_info()
pass port and server_name via wget_ctx in lwIP network stack
let wget_with_dns work with dns disabled
Others:
Add HTTP and IPV4 Config II protocols to UUID library functions.
Add a test for the EFI_IP4_CONFIG2_PROTOCOL. The test sets the ip
policy to static, adds an ip address, and then reads the current
ip address and checks for it to be the same as the one that was set.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Add an EFI HTTP driver. This commit implements the
EFI_HTTP_PROTOCOL and the EFI_HTTP_SERVICE_BINDING_PROTOCOL.
The latter is attached to the handle of th efi network
device. This is the same handle where snp, pxe, and ipconfig
are attached to.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Add an implementation of the EFI_IP4_CONFIG2_PROTOCOL. The protocol
is attached to the handle of the efi network device. This is the same
handle where snp and pxe are attached to.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Add network-stack agnostic way to send an http request and
parse http headers from efi drivers. This uses wget as a
backend and communicates with it via efi_wget_info.
The function efi_net_do_request allocates a buffer on behalf of an
efi application using efi_alloc and passes it to wget to receive
the data. If the method is GET and the buffer is too small, it
re-allocates the buffer based on the last received Content-Length
header and tries again. If the method is HEAD it just issues one
request. So issuing a HEAD request (to update Content-Length) and
then a GET request is preferred but not required.
The function efi_net_parse_headers parses a raw buffer containing
an http header into an array of EFI specific 'http_header' structs.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Set the device path of the efi boot device to an HTTP device path
(as formed by efi_dp_from_http) when the next boot stage is loaded
using wget (i.e., when wget is used with wget_info.set_bootdev=1).
When loaded from HTTP, the device path should account for it so that
the next boot stage is aware (e.g. grub only loads its http stack if
it itself was loaded from http, and it checks this from its device path).
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Add efi_dp_from_http to form a device path from HTTP. The
device path is the concatenation of the device path returned
by efi_dp_from_ipv4 together with an URI node and an END node.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Add the functions efi_net_set_addr and efi_net_get_addr to set
and get the ip address from efi code in a network agnostic way.
This could also go in net_common, or be compiled conditionally
for each network stack.
Signed-off-by: Adriano Cordova <adrianox@gmail.com>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
