The offset variable is set, but never used afterward.
Fix indent. Fix predecrement without justification.
Remove use of parenthesis where unnecessary.
Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Remove undocumented SST special case. This was added in commit
5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
without any explanation in the commit message. Remove it.
Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Remove undocumented write_disable() call. This was added in commit
5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
without any explanation in the commit message. Remove it.
Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Remove undocumented set_4byte() call. This was added in commit
5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
without any explanation in the commit message. Remove it.
Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Remove undocumented spi_nor_wait_till_ready() call. This was added in commit
5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
without any explanation in the commit message. Remove it.
Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Remove undocumented nor->addr_width == 3 test. This was added in commit
5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
without any explanation in the commit message. Remove it.
This also has a bad side-effect which breaks READ operation of every SPI NOR
which does not use addr_width == 3, e.g. s25fs512s does not work at all. This
is because if addr_width != 3, rem_bank_len is always 0, and if rem_bank_len
is 0, then read_len is 0 and if read_len is 0, then the spi_nor_read() returns
-EIO.
Basic reproducer is as follows:
"
=> sf probe ; sf read 0x50000000 0 0x10000
SF: Detected s25fs512s with page size 256 Bytes, erase size 256 KiB, total 64 MiB
device 0 offset 0x0, size 0x10000
SF: 65536 bytes @ 0x0 Read: ERROR -5
"
Fixes: 5d40b3d384dc ("mtd: spi-nor: Add parallel and stacked memories support")
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Documentation:
* include semihosting and K3 boards only once in table of contents
* include file-system API into HTML docs
* describe struct ext2_inode
* update Python requirements
UEFI:
* mark local functions static
* simplify efi_free_pages()
* pass correct end address value to efi_dp_from_mem()
* fix typos in HII test and eficonfig command
-----BEGIN PGP SIGNATURE-----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=1sEL
-----END PGP SIGNATURE-----
Merge tag 'efi-2025-01-rc2' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2025-01-rc2
Documentation:
* include semihosting and K3 boards only once in table of contents
* include file-system API into HTML docs
* describe struct ext2_inode
* update Python requirements
UEFI:
* mark local functions static
* simplify efi_free_pages()
* pass correct end address value to efi_dp_from_mem()
* fix typos in HII test and eficonfig command
The function expects an end address but is being called with
an size instead.
Fixes: 6422820ac3 ("efi_loader: split unrelated code from efi_bootmgr.c")
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Moritz Fischer <moritzf@google.com>
Reviewed-by: Patrick Wildt <pwildt@google.com>
This function is only used locally, so make it static and quiesce
the W=1 warning
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
That variable is defined and assigned a value in two functions
but it's never used.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Mark functions that are only used locally as static and
quiesce W=1 warnings
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
A few functions are only used locally but miss the 'static' keyword.
Add it and quiesce W=1 build wanrings
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
This is only used locally so make it static
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To conform with other messages capitalize the first letter:
%s/enter description/Enter description/g
Adjust the unit tests accordingly.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Provide Sphinx style documentation for struct ext2_inode.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
We currently call efi_free_pages() with a notify flag and explicitly
update the efi memory map. That's not needed as lmb_free_flags() will do
that for us if the LMB_NONOTIFY flag is removed
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Update Sphinx, sphinx-rtd-theme, and their dependencies.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Sphinx writes a warning if a page is included twice in the table of
contents. Use references instead.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Acked-by: Neha Malcom Francis <n-francis@ti.com>
Sphinx warns if a page is added to the table of contents twice.
Add a reference instead.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Swig has changed language specific AppendOutput functions. The helper
macro SWIG_AppendOutput remains unchanged. Use that instead
of SWIG_Python_AppendOutput, which would require an extra parameter
since swig 4.3.0.
/home/flk/poky/build-test/tmp/work/qemux86_64-poky-linux/u-boot/2024.10/git/arch/x86/cpu/u-boot-64.lds
| scripts/dtc/pylibfdt/libfdt_wrap.c: In function ‘_wrap_fdt_next_node’:
| scripts/dtc/pylibfdt/libfdt_wrap.c:5581:17: error: too few arguments to function ‘SWIG_Python_AppendOutput’
| 5581 | resultobj = SWIG_Python_AppendOutput(resultobj, val);
| | ^~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Markus Volk <f_l_k@t-online.de>
Reported-by: Rudi Heitbaum <rudi@heitbaum.com>
Link: https://github.com/dgibson/dtc/pull/154
We never unmap the memory used to update the EFI memory map after
notifications
Fixes: commit 2f6191526a13 ("lmb: notify of any changes to the LMB memory map")
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Create an SoC R5 dtsi file that could be used at board level R5 files. This
would help in keeping the SoC level changes in sync across board files.
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
I'd like to get Cc'ed to u-boot's SPI NOR patches to help review them.
The ultimate goal is to have an aligned approach in u-boot and linux.
Signed-off-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Marek Vasut <marex@denx.de>
Reviewed-by: Tom Rini <trini@konsulko.com>
CONFIG_CMD_DNS and CONFIG_CMD_WGET depend on CONFIG_CMD_NET.
CONFIG_CMD_NET depends on CONFIG_NET or CONFIG_NET_LWIP.
We shall only enable CONFIG_EFI_HTTP if there is network support.
We have to select CONFIG_CMD_NET.
Fixes: d7d07a8b508b ("efi_loader: support boot from URI device path")
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Variables that are only used locally in a module should not be exported.
* Make the HII test data variables static.
* Remove unused GUIDs.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Bastien Curutchet <bastien.curutchet@bootlin.com> says:
Hi all,
This patch series aims to add DM support for the AEMIF controller that
can be found in the DaVinci SoCs.
This controller has already a driver used by the Keystone SoCs so I
add my work to it.
As we can now easily import Linux device-trees, I try to stick the
most I can to the Linux bindings of the AEMIF controller. To do so I add
an 'intermediate' driver called 'ti-aemif-cs'. It's in charge of
configuring timings for a given chip select of the AEMIF controller.
Link: https://lore.kernel.org/r/20241021151330.1860929-1-bastien.curutchet@bootlin.com
The Linux bindings of the AEMIF offer properties that specify the
transaction timings for each chips select.
Add parsing of these properties to calculate the chip select's
configuration from them and the rate of the AEMIF's reference clock.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
The AEMIF's bindings in the Linux tree have a node for the AEMIF
controller and then a node for each AEMIF's chip select. This CS node
doesn't have a compatible property but describes the timing parameters
used by a given chip select.
The U-Boot DM framework expects every node to have a 'compatible'
property. If no 'compatible' is present in a node, its children won't be
parsed by u-boot.
Add DM support to the ti-aemif driver.
Add a new ti-aemif-cs driver to comply with the Linux bindings and the
U-Boot's DM philosophy. This driver handles the timing parameters
of an AEMIF's chip select so move aemif_cs_configure() from ti-aemif.c
to ti-aemif-cs.c.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Wrap the CS configuration into a aemif_configure_cs() to ease its
migration to another driver when adding DM support.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
TI_AEMIF configuration doesn't depend on ARCH_DAVINCI while the AEMIF
controller is present in the DaVinci SoCs.
Add ARCH_DAVINCI to the potential users of the TI_AEMIF driver
Add <asm/io.h> to driver's includes to fix build issue on ARCH_DAVINCI
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
AEMIF controller is present on other SoCs than the Keystone ones.
Remove Keystone specificities from the driver to be able to use it from
other architectures.
Adapt the ks2_evm/board.c to fit the new driver.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Fix following CHECK pointed out by checkpatch:
CHECK: Macro argument 'cs' may be better as '(cs)' to avoid precedence issues
#62: FILE: drivers/memory/ti-aemif.c:15:
+#define AEMIF_CONFIG(cs) (0x10 + (cs * 4))
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
The "dollar" tests require CONFIG_CONSOLE_RECORD to be enabled so guard
with that.
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
Currently, the "dm" suite in unit tests (ut) is only available on
sandbox. Make sure that all cmd tests that are part of this suite are
only available on sandbox and not attempted to be run on hardware (where
it will fail to be able to be started).
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Tom Rini <trini@konsulko.com>
These were missed when removing the rest of the tricorder platform.
Fixes: d137604c20a4 ("arm: Remove tricorder board")
Signed-off-by: Tom Rini <trini@konsulko.com>
Mark all the functions that are only defined locally as static and
quiesce W=1 warnings
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
[trini: Add __maybe_unused as it's now seen as unused in some cases]
Signed-off-by: Tom Rini <trini@konsulko.com>
lmb_alloc_flags() & lmb_alloc_base_flags() are just a wrappers for
_lmb_alloc_base(). Since the only difference is the max address of the
allowed allocation which _lmb_alloc_base() already supports with the
LMB_ALLOC_ANYWHERE flag, remove one of them.
Keep the lmb_alloc_base_flags() which also prints an error on failures
and adjust efi_allocate_pages() to only use one of them.
While at it clean up the duplicate function description from the header
file.
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
We never call lmb_map_update_notify() without checking the result of
lmb_should_notify(). Instead of running that function everytime fold it
in there and add the additional flags parameter
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The function description says this should return 0 or -1 on failures.
When regions coalesce though this returns the number of coalescedregions
which is confusing and requires special handling of the return code.
On top of that no one is using the number of coalesced regions.
So let's just return 0 on success and adjust our selftests accordingly
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
efi_loader.h is included twice. Remove one and move the other in
alphabetical order
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Due to the removal of weak functions in 7d6cee2cd0 ("cmd: cache: Remove
weak function"), U-Boot fails to compile after updating to v2024.10 for
mediatek target in OpenWrt with GCC-14 with error:
cmd/cache.c: In function 'do_dcache':
cmd/cache.c:57:25: error: implicit declaration of function
'noncached_set_region' [-Wimplicit-function-declaration]
Thus, provide a prototype in include/cpu_func.h to fix a build
error in cmd/cache.c, since related prototypes are also located there.
The issue occurred after the update of uboot-mediatek in OpenWrt to
v2024.10, in combination with GCC-14 toolchain. It was reported and
discussed in https://github.com/openwrt/openwrt/issues/16697, and
temporarily fixed with
92ca322dd1.
Signed-off-by: Jonas Jelonek <jelonek.jonas@gmail.com>
Link: https://github.com/openwrt/openwrt/issues/16697
Link: 92ca322dd1
Fixes: 7d6cee2cd0 ("cmd: cache: Remove weak function")
Signed-off-by: Tom Rini <trini@konsulko.com>
Currently, a number of generic cache related functions have their common
prototype declared in include/cpu_func.h. Move the current set of
noncached functions there as well to match.
Signed-off-by: Tom Rini <trini@konsulko.com>
They were added with commit 0e9d23945ce0 ("net: eqos: implement callbaks
to get interface and set txclk rate") but were not removed with
commit 5fc783b5d9c9 ("net: dwc_eth_qos: move i.MX code out") when i.MX
specific code was moved to a separate file.
Signed-off-by: Erik Schumacher <erik.schumacher@iris-sensing.com>
