The example in kernel_fdt.rst is inconsistently indented, making it
difficult to read.
Indent the example with the same standard as the other examples:
Four spaces for the ReST code block and for every nesting level.
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
The number of bytes may only be specified if a device number id provided.
Correct the formatting.
Acked-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
First, try and be slightly clearer about what "buildx" is with respect
to the docker build process.
Second, now that we build the container for both amd64 and arm64, we
should document how to make a docker "builder" that has multiple nodes.
With this one node should be amd64 and one node arm64, and with
reasonably fast arm64 hardware this will be much quicker than using
QEMU.
Signed-off-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Add document for Banana Pi F3 board which based on SpacemiT's K1 SoC.
Signed-off-by: Kongyang Liu <seashell11234455@gmail.com>
Signed-off-by: Huan Zhou <pericycle.cc@gmail.com>
Tested-by: Marcel Ziswiler <marcel@ziswiler.com>
Reviewed-by: Yixun Lan <dlan@gentoo.org>
Provide a page describing the usage of U-Boot on the LicheeRV Nano and a
description of the board.
Signed-off-by: Thomas Bonnefille <thomas.bonnefille@bootlin.com>
Reviewed-by: Leo Yu-Chi Liang <ycliang@andestech.com>
The srktool option -c does not allow spaces between certificate
filenames. Only commas (',') should separate the filenames. If spaces
are incorrectly included, srktool will not display an error or warning
message but will only process the first certificate in the list.
So adapt documentation accordingly.
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com>
Remove one of the double colon so ..code-block is used for formatting.
Signed-off-by: Leonard Anderweit <l.anderweit@phytec.de>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Board introductions have a feature list which isn't formatted properly
according to rST and is thus rendered incorrectly.
Fix this by adding the missing newlines in the appropriate places.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Add a blank line after title "Specification:" to
make it render correctly html.
And also remove the useless > in bash code block.
Signed-off-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Most Rockchip device tree related bindings are converted to YAML
and available in the U-boot /dts/upstream/Bindings/ directory.
Remove all redundant U-boot entries.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Although it has historically been different, the current standard
spelling of the neutral singular possessive pronoun is "its".
Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Garrett Giordano <ggiordano@phytec.com> says:
This patch set adds the phyCORE AM62Ax board support and documenation to
u-boot.
The phyCORE-AM62Ax is a SoM (System on Module) featuring TI's AM62Ax SoC. It can
be used in combination with different carrier boards. This module can come
with different sizes and models for DDR, eMMC, SPI NOR Flash and various SoCs
from the AM62x family.
A development Kit, called phyBOARD-Lyra is used as a carrier board reference
design around the AM62x SoM.
This series depends on the following two patches:
- [PATCH v2] arm: mach-k3: am62a7: Provide a way to obtain boot device for non SPL
https://lists.denx.de/pipermail/u-boot/2024-October/570156.html
- [PATCH] board: phytec: common: Introduce CONFIG_PHYTEC_K3_DDR_PATCH
https://lists.denx.de/pipermail/u-boot/2024-November/571543.html
Link: https://lore.kernel.org/r/20241118231606.3161665-1-ggiordano@phytec.com
[trini: Fix warning in board/phytec/common/k3/board.c when
CONFIG_EFI_HAVE_CAPSULE_SUPPORT is not enabled]
Signed-off-by: Tom Rini <trini@konsulko.com>
Switch the callback static list from the board configuration variable
CFG_ENV_CALLBACK_LIST_STATIC to Kconfig CONFIG_ENV_CALLBACK_LIST_STATIC.
Signed-off-by: Christoph Niedermaier <cniedermaier@dh-electronics.com>
Reviewed-by: Marek Vasut <marex@denx.de>
binman:
- Separate binman description from main DT
zynqmp:
- Enable binman for ZynqMP platforms
- DT sync with Linux v6.12
- Update usb5744 hub for SOMs
common:
- Drop SPL_FIT_GENERATOR support
versal2
- Enable OPTEE layers
ospi:
- Refactor the flash reset functionality
pytest:
- Fix tcminit mode handling
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCZ0m53AAKCRDKSWXLKUoM
Ie4PAJ4r7EHkSngpW3QdBEb15aLxN1pC4ACcC9DDGGn04kCTChpv0CEi/kRLUBU=
=Veyg
-----END PGP SIGNATURE-----
Merge tag 'xilinx-for-v2025.04-rc1' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze into next
AMD/Xilinx changes for v2025.04-rc1
binman:
- Separate binman description from main DT
zynqmp:
- Enable binman for ZynqMP platforms
- DT sync with Linux v6.12
- Update usb5744 hub for SOMs
common:
- Drop SPL_FIT_GENERATOR support
versal2
- Enable OPTEE layers
ospi:
- Refactor the flash reset functionality
pytest:
- Fix tcminit mode handling
Add instructions on how to build the file for multiple architectures.
Add a message indicating what is happening.
Update the documentation as well.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
The SPL_FIT_GENERATOR is long superseded by binman, drop SPL_FIT_GENERATOR
support as there are no more users.
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Michal Simek <michal.simek@amd.com>
Link: https://lore.kernel.org/r/22109373594b6a5d1110be9420ccd8fbb93a61d3.1730452668.git.michal.simek@amd.com
The phyCORE-i.MX 93 is available in various variants (e.g. different ram
sizes, eMMC HS400 yes/no). Enable hardware introspection for the
imx93-phyboard-segin_defconfig, so that during startup the SOM module
variant can be detected, and the hardware can be configured accordingly.
The resulting SPL and u-boot binary shall able to boot each
phyCORE-i.MX 93 module variant on each carrier board. Finally rename
imx93-phyboard-segin_defconfig to imx93-phycore_defconfig, to highlight
its SOM scope.
Signed-off-by: Christoph Stoidner <c.stoidner@phytec.de>
Reviewed-by: Wadim Egorov <w.egorov@phytec.de>
Reviewed-by: Yannic Moog <y.moog@phytec.de>
The lwIP version of wget supports a different syntax with a URL,
in addition to the legacy syntax. Document that.
While we're at it, fix a couple of minor issues in the legacy
syntax:
- hostIPaddr can be a DNS name if CONFIG_CMD_DNS is enabled
- path is mandatory
Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org>
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
* format according to Sphinx style
* add link to Linux Kconfig documentation
* sort table alphabetically in 'Conversion from boards.cfg to Kconfig'
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
This is extremely similar to the MMC backend, but there are some notable
differences.
Works with a DFU string like
scsi 4=u-boot-bin part 11
Where "4" is the SCSI dev number (sequential LUN across all SCSI devices)
and "11" is the partition number.
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Acked-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Caleb Connolly <caleb.connolly@linaro.org>
We now can use a combination og lwIP & mbedTLS and download from
https://. Describe the config options needed to enable it as well
as some limitations
Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Jerome Forissier <jerome.forissier@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The FriendlyElec NanoPi R2S Plus is a single-board computer based on
Rockchip RK3328 SoC. It features e.g. 1 GB DDR4 RAM, 32 GB eMMC,
SD-card, 2x GbE LAN, optional M.2 SDIO Wi-Fi and 2x USB 2.0 host.
Features tested on a NanoPi R2S Plus 2309:
- SD-card boot
- eMMC boot
- Ethernet
- USB gadget
- USB host
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Add support for Cool Pi GenBook, it works as a carrier board
connect with CM5 SOM.
Specification:
- Rockchip RK3588
- LPDDR5X 8/32 GB
- eMMC 64 GB
- HDMI Type A out x 1
- USB 3.0 Host x 1
- USB-C 3.0 with DisplayPort AltMode
- PCIE M.2 E Key for RTL8852BE Wireless connection
- PCIE M.2 M Key for NVME connection
- eDP panel with 1920x1080
Tested by Armbian boot on USB disk.
Change-Id: I4d9b8572dc7c400077dde666633f3fea1b47dd03
Signed-off-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The Qnap TS433 is a 4-bay NAS based around the RK3568.
Two SATA bays are connected to the RK3568's own SATA controllers while
the other two are connected to a JMicron SATA controller living on the
PCIe bus.
It provides one 2.5Gb and one 1Gb ethernet port as well as 3 usb ports.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Adjust the PDF output options for rst2pdf:
* Set start document to 'index'.
* Set title to 'Das U-Boot'.
* Set author to 'The U-Boot development community'.
Correct documentation link.
Remove obsolete FIXME.
Link: https://rst2pdf.org/static/manual.html
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
This is mostly hidden in the background, but it is sometimes useful to
look at it. Add a function to allow this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Coreboot provides the CMOS layout in the tables it passes to U-Boot.
Use that to build an editor for the CMOS settings.
Signed-off-by: Simon Glass <sjg@chromium.org>
Coreboot tables provide information about the CMOS-RAM checksum. Add a
command which can check and update this.
With this it is possible to adjust CMOS-RAM settings and tidy up the
checksum afterwards.
Signed-off-by: Simon Glass <sjg@chromium.org>
