common:
- spl: Introduce SoC specific init function
xilinx:
- Enable FF-A and NVMEM
- Rename spl_board_init() to spl_soc_init()
zynqmp:
- DT alignments
- Enable reset from SPL
- Enable USB3 for KD240
- Align multiboot register on Kria for proper reboot
- Allow multiboot environment write even in saved environment
- Move zynqmp commands from board/ to arch/
- Clean up xilinx_zynqmp.h
versal:
- Do not prioritize boot device if driver is not enabled
versal-net:
- Setup location for redundant variables in SPI
versal2:
- Add support for new SOC
mmc:
- Fix tap delay for SD on Versal NET
spi:
- Add SPI_NOR_OCTAL_READ flag for mx66uw2g345gx0 flash part
gpio:
- Cover MODEPIN firmware dependency
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQbPNTMvXmYlBPRwx7KSWXLKUoMIQUCZnBfewAKCRDKSWXLKUoM
Ib/7AJ0cn3q7lMpxbSbRj33oftI8Vy8+owCeN35Nl8TN9l/DHbfusER4uVfnOVw=
=YMIB
-----END PGP SIGNATURE-----
Merge tag 'xilinx-for-v2024.10-rc1' of https://source.denx.de/u-boot/custodians/u-boot-microblaze into next
AMD/Xilinx changes for v2024.10-rc1
common:
- spl: Introduce SoC specific init function
xilinx:
- Enable FF-A and NVMEM
- Rename spl_board_init() to spl_soc_init()
zynqmp:
- DT alignments
- Enable reset from SPL
- Enable USB3 for KD240
- Align multiboot register on Kria for proper reboot
- Allow multiboot environment write even in saved environment
- Move zynqmp commands from board/ to arch/
- Clean up xilinx_zynqmp.h
versal:
- Do not prioritize boot device if driver is not enabled
versal-net:
- Setup location for redundant variables in SPI
versal2:
- Add support for new SOC
mmc:
- Fix tap delay for SD on Versal NET
spi:
- Add SPI_NOR_OCTAL_READ flag for mx66uw2g345gx0 flash part
gpio:
- Cover MODEPIN firmware dependency
Some architectures use spl_board_init() in their SoC specific
implementation. Board developers should be able to add board specific
implementation via spl_board_init(). Hence, introduce a spl_soc_init()
method which is called right before spl_board_init() for SoC
specific implementation.
Signed-off-by: Lukas Funke <lukas.funke@weidmueller.com>
Reviewed-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20240327121153.2455126-2-lukas.funke-oss@weidmueller.com
Signed-off-by: Michal Simek <michal.simek@amd.com>
Nothing in-tree calls watchdog_reset() anymore (that stopped two years
ago with the removal of the WATCHDOG_RESET macro). So that function is
dead code.
That was the only caller of reset_85xx_watchdog(), so that
can obviously also be removed.
Finally, init_85xx_watchdog() is/was also not called from anywhere, so
that can go away as well, which nicely also removes a bit of
arch-specific code from the generic watchdog.h header.
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Stefan Roese <sr@denx.de>
There are of course not a whole lot of examples in-tree yet, but
before they appear, let's make this API change: Instead of separately
allocating a 'struct cyclic_info', make the users embed such an
instance in their own structure, and make the convention that the
callback simply receives the 'struct cyclic_info *', from which the
clients can get their own data using the container_of() macro.
This has a number of advantages.
First, it means cyclic_register() simply cannot fail, simplifying the
code. The necessary storage will simply be allocated automatically
when the client's own structure is allocated (often via
uclass_priv_auto or similar).
Second, code for which CONFIG_CYCLIC is just an option can more easily
be written without #ifdefs, if we just provide an empty struct
cyclic_info {}. For example, the nested CONFIG_IS_ENABLED()s in
https://lore.kernel.org/u-boot/20240316201416.211480-1-marek.vasut+renesas@mailbox.org/
are mostly due to the existence of the 'struct cyclic_info *' member
being guarded by #ifdef CONFIG_CYCLIC.
And we do probably want to avoid the extra memory overhead of that
member when !CONFIG_CYCLIC. But that is automatic if, instead of a
'struct cyclic_info *', one simply embeds a 'struct cyclic_info',
which will have size 0 when !CONFIG_CYCLIC. Also, the no-op
cyclic_register() function can just unconditionally be called, and the
compiler will see that (1) the callback is referenced, so not emit a
warning for a maybe-unused function and (2) see that it can actually
never be reached, so not emit any code for it.
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
We are not checking the return value of strdup(), nor
freeing the string in cyclic_unregister().
However, all current users either pass a string literal or the
dev->name of the client device. So in all cases the name string will
live at least as long as the cyclic_info is registered, so just make
that a requirement.
Reviewed-by: Stefan Roese <sr@denx.de>
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Loading and running the ELF image is the responsibility of the
library and should not be associated with the command line interface.
It is also required to run ELF images from FIT with the bootm command
so as not to depend on the command line interface.
Signed-off-by: Maxim Moskalets <maximmosk4@gmail.com>
The RK3588-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230
connector) system-on-module from Theobroma Systems, featuring the
Rockchip RK3588.
It provides the following feature set:
* up to 16GB LPDDR4x
* on-module eMMC
* SD card (on a baseboard) via edge connector
* Gigabit Ethernet with on-module GbE PHY
* HDMI/eDP
* MIPI-DSI
* 4x MIPI-CSI (3x on FPC connectors, 1x over Q7)
* HDMI input over FPC connector
* CAN
* USB
- 1x USB 3.0 dual-role (direct connection)
- 2x USB 3.0 host + 1x USB 2.0 host
* PCIe
- 1x PCIe 2.1 Gen3, 4 lanes
- 2xSATA / 2x PCIe 2.1 Gen1, 2 lanes
* on-module ATtiny816 companion controller, implementing:
- low-power RTC functionality (ISL1208 emulation)
- fan controller (AMC6821 emulation)
* on-module Secure Element with Global Platform 2.2.1 compliant
JavaCard environment
The support is added for Tiger on Haikou devkit, similarly to RK3399
Puma and PX30 Ringneck.
Cc: Quentin Schulz <foss+uboot@0leil.net>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
ArmSoM Sige7 is a Rockchip RK3588 based SBC (Single Board Computer) by
ArmSoM.
There are two variants depending on the DRAM size : 8G and 16G.
Specification:
Rockchip Rk3588 SoC
4x ARM Cortex-A76, 4x ARM Cortex-A55
8/16GB memory LPDDR4x
Mali G610MC4 GPU
2x MIPI CSI 2 multiple lanes connector
64GB/128GB on board eMMC
uSD slot
1x USB 2.0 Type-A, 1x USB 3.0 Type-A, 1x USB 3.0 Type-C
1x HDMI 2.1 output
2x 2.5 Gbps Ethernet port
40-pin IO header including UART, SPI and I2C
USB PD over USB Type-C
Size: 92mm x 62mm
Kernel commit:
81c828a67c78 (arm64: dts: rockchip: Add ArmSom Sige7 board)
Signed-off-by: Jianfeng Liu <liujianfeng1994@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
commit dfeb4f0d7935 ("cmd: bcb: extend BCB C API to allow read/write the fields")
introduced the bcb_get() function.
When CONFIG_CMD_BCB=n, that function is stubbed.
The stubbed function has a wrong prototype: value_size arg is missing.
Add the missing argument to fix build when CONFIG_CMD_BCB=n.
Fixes: dfeb4f0d7935 ("cmd: bcb: extend BCB C API to allow read/write the fields")
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Dmitrii Merkurev <dimorinny@google.com>
Reviewed-by: Julien Masson <jmasson@baylibre.com>
According to [0], raw access to mmc should not have mmcpart in the
entry. This was fixed in k3_dfu_combined.env but k3_dfu.env had been
overlooked.
[0] doc/usage/dfu.rst
Fixes: 53b406369e9d ("DFU: Check the number of arguments and argument string strictly")
Signed-off-by: Neha Malcom Francis <n-francis@ti.com>
Switch PHY_ANEG_TIMEOUT to CONFIG_PHY_ANEG_TIMEOUT Kconfig symbol.
This removes one more configuration headers option finalizes its
Kconfig symbol conversion. No functional change expected.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Let users configure default auto-negotiation timeout via Kconfig
instead of specifying it in board configuration headers. This is
the first step toward converting this to Kconfig fully, so far the
legacy PHY_ANEG_TIMEOUT in configuration headers takes precedence.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
UEFI:
* Allow specifying a device-tree in an EFI load option
using the efidebug or eficonfig command.
* Let the EFI boot manager fall back to an OS provided device-tree
if no device-tree is specified.
-----BEGIN PGP SIGNATURE-----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=D5PO
-----END PGP SIGNATURE-----
Merge tag 'efi-next-20240611' of https://source.denx.de/u-boot/custodians/u-boot-efi into next
Pull request efi-next-20240611
UEFI:
* Allow specifying a device-tree in an EFI load option
using the efidebug or eficonfig command.
* Let the EFI boot manager fall back to an OS provided device-tree
if no device-tree is specified.
As we now also store device-tree device-paths in load options rename
struct efi_initrd_dp to efi_lo_dp_prefix.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
If no device-tree is specified, try to load a device-tree from the boot
device use the $fdtfile concatenated to either of the paths '/dtb/', '/',
'/dtb/current/'.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
We can reuse this function to load the device-tree.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Move distro_efi_get_fdt_name() to a separate C module
and rename it to efi_get_distro_fdt_name().
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
We already support creating a load option where the device-path
field contains the concatenation of the binary device-path and
optionally the device path of the initrd which we expose via the
EFI_LOAD_FILE2_PROTOCOL.
Allow to append another device-path pointing to the device-tree
identified by the device-tree GUID.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Allow appending a device-path to a device-path that contains an end node
as separator. We need this feature for creating boot options specifying
kernel, initrd, and dtb.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Quote from [1]:
"For devices launching with Android 13, the generic ramdisk is removed
from the boot image and placed in a separate init_boot image.
This change leaves the boot image with only the GKI kernel."
While at it, update wrong error handling message when vendor_boot
cannot be loaded.
[1]: https://source.android.com/docs/core/architecture/partitions/generic-boot
Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Upstream overlays like the ARM64 TI
k3-am625-beagleplay-csi2-tevi-ov5640.dtso can easily have more then
32 characters. Increase the overlay length to 64 characters to
apply overlays with longer names.
Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Acked-by: Kory Maincent <kory.maincent@bootlin.com>
Secure firmwares must be loaded if SOC is secure,
currently rproc framework chooses non-secure firmware always.
So adding support to load secure firmware, when SOC is secure
Signed-off-by: Manorit Chawdhry <m-chawdhry@ti.com>
Signed-off-by: Udit Kumar <u-kumar1@ti.com>
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> # Intel Edison
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Marek Behún <kabel@kernel.org> says:
This series contains improvements for the 'eeprom' command:
- refactors
- fixes
- improvements
- ability to use driver model EEPROMs (uclass UCLASS_I2C_EEPROM)
- more flexible EEPROM layout support
It should not cause any behavior change for any existing board.
This series is a dependency for some DDR issue fixes for Turris Omnia.
I will be sending that one separately.
github PR link (with CI):
https://github.com/u-boot/u-boot/pull/540
- there is a failure for
test.py for sandbox sandbox_clang
but it seems unrelated to these changes
Split the eeprom layout field finding code from the
eeprom_layout_update_field() function in order to make it usable in
alternative implementations of update method.
Signed-off-by: Marek Behún <kabel@kernel.org>
Add support for different RAM sizes and speed grades on the
phyCORE-i.MX8MP.
Add support for 1GB 1.5GHz, 1GB 2GHz, 4GB 1.5GHz,
4GB 2GHz and 8GB 2GHz RAM.
The RAM size and speed grade is detected by the information
stored in the EEPROM on the SoM.
Co-developed-by: Benjamin Hahn <B.Hahn@phytec.de>
Signed-off-by: Benjamin Hahn <B.Hahn@phytec.de>
Co-developed-by: Yannic Moog <y.moog@phytec.de>
Signed-off-by: Yannic Moog <y.moog@phytec.de>
Co-developed-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Yashwanth Varakala <y.varakala@phytec.de>
Signed-off-by: Teresa Remmet <t.remmet@phytec.de>
Use upstream device tree files and bindings. To do so:
- imply (enable) OF_UPSTREAM option for E850-96 target
- point DEFAULT_DEVICE_TREE in E850-96 config to upstream dts
- remove now not needed local dts files, binding docs and headers
- update MAINTAINERS and board/samsung/e850-96/MAINTAINERS
correspondingly
Upstream device tree files for Exynos850 SoC and E850-96 board are
pretty much the same as local (removed) ones, so the conversion is
rather straightforward and painless in this case. The appended dts file
(arch/arm/dts/exynos850-e850-96-u-boot.dtsi) stays unchanged.
The only remaining local dt-bindings doc for E850-96 board is
exynos-pmu.yaml. It wasn't removed as it's quite different from Linux
kernel version. Particularly U-Boot local version of exynos-pmu.yaml
describes "samsung,uart-debug-1" property, which is not present in Linux
kernel binding. Later it might be upstreamed to Linux kernel, and once
it's done the U-Boot exynos-pmu.yaml binding can be removed.
No functional change.
Acked-by: Sumit Garg <sumit.garg@linaro.org>
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
replace tpm2_supported_algorithms with an array of structures
relating algorithm names, to TCG id's, digest length and mask values.
While at it fix the tpm2_algorithm_to_mask to return the proper value.
Cc: Eddie James <eajames@linux.ibm.com>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Fixes: 97707f12fdab ("tpm: Support boot measurements")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The Indiedroid Nova is a Rockchip RK3588S based SBC from Indiedroid.
Specifications:
Rockchip RK3588S SoC
4x ARM Cortex-A76, 4x ARM Cortex-A55
4/8/16GB memory LPDDR4x
Mali G610MC4 GPU
Optional eMMC
2x USB 2.0, 2x USB 3.0, 1x USB 3.0 C port with DP Alt
1x MIPI-CSI Port (4-lane or 2x 2-lane)
1x MIPI-DSI 4-lane connector
1x Micro HDMI 2.1 output, 1x DP 1.4 output
Gigabit Ethernet
Realtek RTL8821CS WiFi
4 pin debug UART connector
40 pin GPIO header
Size: 85mm x 56mm (Raspberry Pi Form Factor)
Kernel commit:
3900160e164b ("arm64: dts: rockchip: Add Indiedroid Nova board")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
The Powkiddy X55 is a Rockchip RK3566 based handheld gaming device.
UART, ADC, eMMC, and SDMMC are tested to work in U-Boot and this
successfully boots mainline Linux.
Kernel commit:
e99adc97e21a ("arm64: dts: rockchip: Add Powkiddy X55")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Sughosh Ganu <sughosh.ganu@linaro.org> says:
The following patch series adds support for version 2 of the FWU
metadata. The version 2 metadata structure is defined in the latest
revision of the FWU specification [1].
The earlier versions of these patches were migrating to a version 2
only support in U-Boot, similar to TF-A. However, based on feedback
from ST [2], this series has been updated to support both versions. A
platform would still be needed to enable one of the two versions of
metadata through a config symbol.
TF-A has code which reads the FWU metadata and boots the platform from
the active partition. TF-A has decided to migrate the FWU code to a
version 2 only support. These changes have been merged in upstream
TF-A.
These changes have been tested on the ST DK2 board, which uses the GPT
based partitioning scheme. Both V1 and V2 metadata versions have been
tested on the DK2 board.
These changes need to be tested on platforms with MTD partitioned
storage devices.
With addition of support for version 2 of the FWU metadata structure,
the metadata information is collected into a version agnostic
structure. Make changes to the FWU functions so that the information
that was earlier obtained by reading the metadata structure is now
obtained through this version agnostic structure.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Support is being added in U-Boot for version 2 of the FWU
metadata. Support for this version is to co-exist with version 1
support. To achieve this, a common, version agnostic structure has
been added to keep information provided by the FWU metadata
structure.
Add API's to handle the version specific FWU metadata fields. The
version agnostic structure gets initialized at boot by reading the FWU
metadata. Updates to the FWU metadata result in the API's getting
called to populate the version specific fields of the strucure, before
the metadata gets written to the storage media.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
The FWU specification now has two versions of the FWU metadata
structure, and both are to be supported. Introduce a version agnostic
structure for storing information about the FWU updatable images. This
allows for a split of common version agnostic FWU code and version
specific code.
The version specific code is then responsible for arranging the data
as per the corresponding metadata structure before it gets written to
the metadata partitions.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
Add support for version 2 of the FWU metadata structure. The top level
structure is kept separate through a config symbol. Most of the
fields, primarily used for providing information on updatable images
are common across the two versions.
Also change a few existing structure members used for image
identification to reflect the fact that these are GUIDs, and not
UUIDs.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
The FWU metadata access driver for MTD partitioned devices currently
uses a statically allocated array for storing the updatable image
information. This array depends on the number of banks and images per
bank. With migration of the FWU metadata to version 2, these
parameters are now obtained at runtime from the metadata.
Make changes to the FWU metadata access driver for MTD devices to
allocate memory for the image information dynamically in the driver's
probe function, after having obtained the number of banks and images
per bank by reading the metadata. Move the image information as part
of the driver's private structure, instead of using a global variable.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
In version 2 of the metadata structure, the size of the structure
cannot be determined statically at build time. The structure is now
broken into the top level structure which contains a field indicating
the total size of the structure.
Add a size parameter to the metadata access API functions to indicate
the number of bytes to be accessed. This is then used to either read
the entire structure, or only the top level structure.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org>
Tested-by: Michal Simek <michal.simek@amd.com>
By removing the "boot" directory in the "m53menlo/boot/fitImage" path,
we simplify the TFTP server directory layout a bit. This also requires a
change to the mmcload command as it (mis-)uses the same variable as the
TFTP boot.
Signed-off-by: Olaf Mandel <o.mandel@menlosystems.com>
Signed-off-by: Marek Vasut <marex@denx.de>
The ethernet PHY on MX8Menlo board takes a while to come out of
reset, increase the auto-negotiation timeout to prevent it from
timing out in case the ethernet is used right after the board was
reset.
Signed-off-by: Marek Vasut <marex@denx.de>
Migrate RV1126 boards that exists in Linux v6.8 to use OF_UPSTREAM.
Following targets is migrated to use OF_UPSTREAM:
- rv1126-edgeble-neu2 : Board is an industrial form factor
IO board.
- sonoff-ihost-rv1126 : Gateway device designed to provide a
Smart Home Hub.
Cc: Tim Lunn <tim@feathertop.org>
Cc: Jagan Teki <jagan@edgeble.ai>
Reviewed-By: Tim Lunn <tim@feathertop.org>
Tested-By: Tim Lunn <tim@feathertop.org>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Anand Moon <anand@edgeble.ai>
Signed-off-by: Anand Moon <linux.amoon@gmail.com>
