This driver should not generally be present in SPL, even if misc devices
are enabled. Update the Makefile rule accordingly.
Signed-off-by: Simon Glass <sjg@chromium.org>
Allow MMC init when clock support is not enabled in a particular phase.
Refactor the setting of priv->emmc_clk so it is a bit clearer.
Signed-off-by: Simon Glass <sjg@chromium.org>
When MMC booting fails it is sometimes hard to figure out what went
wrong as there is no error code. It isn't even clear which MMC device
was chosen, since SPL can have its own numbering.
Add some debugging to help with this.
Signed-off-by: Simon Glass <sjg@chromium.org>
There are currently four symbols here, so drop the word 'two'.
Signed-off-by: Simon Glass <sjg@chromium.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Separate BSS is current mandatory on armv8 but this is not useful for
early boot phases. Add support for the combined BSS.
Use an #ifdef to avoid using CONFIG_SPL_BSS_START_ADDR which is not
valid in this case.
Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
The sprintf() etc. functions are supposed to return the length of the
string written, but do not. Fix this by checking the amount of buffer
space used.
Signed-off-by: Simon Glass <sjg@chromium.org>
Before
commit da3447d09fa0 ("android: Fix ramdisk loading for bootimage v3+"),
the ramdisk was loaded from img_data.ramdisk_ptr, ignoring offset
provided via mkbootimg.
commit da3447d09fa0 ("android: Fix ramdisk loading for bootimage v3+")
rightfully fixes this by switching to use img_data.ramdisk_addr instead.
However, it does not copy the ramdisk content to img_data.ramdisk_addr
in case we use boot image v2.
Because of this, we can no longer boot Android on Khadas vim3 board:
[ 3.940361] RAMDISK: Couldn't find valid RAM disk image starting at 0.
Add the missing memcpy() to fix the issue.
Fixes: da3447d09fa0 ("android: Fix ramdisk loading for bootimage v3+")
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Oliver Gaskell <Oliver.Gaskell@analog.com> says:
ADSP-SC5xx is a series of ARM-based DSPs.
This comprises the armv7 based SC57x, SC58x and SC594 series, and the
armv8 based SC598.
This patch series includes configurations, init code, and minimal DTs
to enable Analog Devices' evaluation boards for these SoCs to boot
through SPL and into U-Boot Proper, as well as devicetree schemas for
the added DTs.
This patch series depends on ("arm: Add Analog Devices SC5xx Machine
Type") (https://lists.denx.de/pipermail/u-boot/2024-April/552043.html)
Adds support for Analog Devices' SC589-MINI board. Includes:
- Board specific configs in mach-sc5xx/Kconfig
- Board-specific Kconfig and environment in board/adi/
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Adds support for Analog Devices' SC589-EZKIT board. Includes:
- Board specific configs in mach-sc5xx/Kconfig
- Board-specific Kconfig and environment in board/adi/
- Memory configuration
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Adds support for Analog Devices' SC594-SOM-EZLITE board. Includes:
- Board specific configs in mach-sc5xx/Kconfig
- Board-specific Kconfig and environment in board/adi/
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Adds support for Analog Devices' SC598-SOM-EZLITE board. Includes:
- Board specific configs in mach-sc5xx/Kconfig
- Board-specific Kconfig and environment in board/adi/
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Moves common options between all SC5xx series boards to the ARCH_SC5XX
option instead of duplicating them.
Also, it was possible to select multiple of the SoC support options.
Given a U-Boot binary can only support a single platform, this moves
the SoC selection to a `choice`, making them mutually exclusive.
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Add devicetree schema for the clock tree on Analog Devices SC5xx series
SoCs.
Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Add minimal device tree for Analog Devices' SC598-SOM-EZLITE board.
This patch depends on Patches 01 and 07, for sc5xx.dtsi and
sc598-som.dtsi respectively.
Co-developed-by: Greg Malysa <greg.malysa@timesys.com>
Signed-off-by: Greg Malysa <greg.malysa@timesys.com>
Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Add minimal device tree for Analog Devices' SC598-SOM-EZKIT board, and
the SC598 SoM.
This patch depends on patch 01, for sc5xx.dtsi.
Co-developed-by: Greg Malysa <greg.malysa@timesys.com>
Signed-off-by: Greg Malysa <greg.malysa@timesys.com>
Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Add minimal device tree for Analog Devices' SC594-SOM-EZLITE board.
This patch depends on Patches 01 and 05, for sc5xx.dtsi and
sc594-som.dtsi respectively.
Co-developed-by: Greg Malysa <greg.malysa@timesys.com>
Signed-off-by: Greg Malysa <greg.malysa@timesys.com>
Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Add minimal device tree for Analog Devices' SC594-SOM-EZKIT board, and
the SC594 SoM.
This patch depends on patch 01, for sc5xx.dtsi.
Co-developed-by: Greg Malysa <greg.malysa@timesys.com>
Signed-off-by: Greg Malysa <greg.malysa@timesys.com>
Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Add minimal device tree for Analog Devices' SC584-EZKIT board, and
common files for the SC58x family.
This patch depends on Patch 01, for sc5xx.dtsi.
Co-developed-by: Greg Malysa <greg.malysa@timesys.com>
Signed-off-by: Greg Malysa <greg.malysa@timesys.com>
Co-developed-by: Trevor Woerner <twoerner@gmail.com>
Signed-off-by: Trevor Woerner <twoerner@gmail.com>
Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
Adds minimal device tree for Analog Devices' SC573-EZKIT board and
common files for the SC57x/SC5xx family.
This also adds all sc5* devicetrees to ARM SC5XX in MAINTAINERS, and
adds the ADSP Linux mailing list as the list for ARM SC5XX.
Co-developed-by: Greg Malysa <greg.malysa@timesys.com>
Signed-off-by: Greg Malysa <greg.malysa@timesys.com>
Co-developed-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Oliver Gaskell <Oliver.Gaskell@analog.com>
The primary upstream URL for tf-a has moved, in some cases
things like tags are not always pushed to the old URL so
update the URLs to the primary upstream project URL.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
CONFIG_USB_GADGET_DOWNLOAD depends on CONFIG_USB_GADGET.
It is sufficient to depend on the prior.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Link: https://lore.kernel.org/r/20240921092050.9260-1-heinrich.schuchardt@canonical.com
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Yocto build is using EXT_DTB to repack U-Boot during signed
FIT kernel creation. First, it takes the DTB from U-Boot, then
it creates signed FIT kernel image and places kernel key into
the DTB. After that it executes:
make EXT_DTB=/path/to/dtb/with/kernel/key
Despite the fact that in the documentation all examples with EXT_DTB
use only single DTB, the patch allows pass many DTB files separated
by spaces, e.g.:
make EXT_DTB="/path1/to/1.dtb /path2/to/2.dtb"
The first DTB from the list become default configuration.
Signed-off-by: Alexander Kochetkov <al.kochet@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
A write to the TX buffer is performed before entering the loop to "avoid
clock starvation". This sometimes results in subsequent writes in
davinci_spi_xfer_data() to occur while the TXFULL bit is asserted,
leading to write failures.
Remove the preload of the TX buffer.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Adds support for the secp521r1 ECDSA algorithm to mkimage.
Signed-off-by: Joakim Tjernlund <joakim.tjernlund@infinera.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
When SPL_FS_LOADER is set to y and FS_LOADER is not enabled, the SPL build
fails with the following errors:
AR spl/boot/built-in.o
LD spl/u-boot-spl
arm-none-linux-gnueabihf-ld.bfd: drivers/misc/fs_loader.o: in function
`fw_get_filesystem_firmware':
/u-boot/drivers/misc/fs_loader.c:162: undefined reference to
`fs_set_blk_dev'
arm-none-linux-gnueabihf-ld.bfd: /home/frh/tdx/src/u-boot/drivers/misc/
fs_loader.c:185: undefined reference to `fs_read'
arm-none-linux-gnueabihf-ld.bfd: drivers/misc/fs_loader.o: in function
`select_fs_dev':
/u-boot/drivers/misc/fs_loader.c:89: undefined reference to
`fs_set_blk_dev_with_part'
make[1]: *** [scripts/Makefile.spl:527: spl/u-boot-spl] Error 1
make: *** [Makefile:2055: spl/u-boot-spl] Error 2
Fix it by replacing the FS_LOADER with SPL_FS_LOADER in the Makefile, so
the fs.c with the necessary function definitions are compiled.
Fixes: b071a07743d4 ("drivers: misc: Makefile: Enable fs_loader compilation at SPL Level")
Suggested-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Hiago De Franco <hiago.franco@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Update J722S Resource Management configs to the latest output
generated by K3 Resource Partitioning tool. Main change includes
allocating more BCDMA channels to A53 for CSI2RX to support
4 x CSIRX capture instance simultaneously.
Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jayesh Choudhary <j-choudhary@ti.com>
When CONFIG_BOOTMETH_ANDROID is set, enable Android boot flow support.
To build for AM62Px for Android, we can re-use
the am62x_a53_android.config fragment when building A53 bootloaders:
$ make am62px_evm_a53_defconfig
$ make am62x_a53_android.config
$ make
Signed-off-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Signed-off-by: Guillaume La Roque <glaroque@baylibre.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
