Commit Graph

  • 5f3dfadc26 Fix unused function in cmd_bdinfo.c Simon Glass 2011-12-06 13:37:17 +00:00
  • 80729a5493 Fix SPI build errors in exports.c Simon Glass 2011-12-06 19:31:32 +00:00
  • 42c4a23a55 Include common.h in qsort.c to fix build warning Simon Glass 2011-12-06 13:37:16 +00:00
  • f915c9316c Revert "mii: miiphy register address width change" Wolfgang Denk 2011-12-07 08:35:14 +01:00
  • 4497861ae7 p2041rdb: fix serdes clock map Shaohui Xie 2011-12-02 09:38:12 +08:00
  • 15422043c4 davinci: Remove unwanted memsize.c from hawkboard's nand spl build Sughosh Ganu 2011-12-06 03:45:28 +00:00
  • 5183b7ec48 devkit8000: Move CONFIG_SYS_TEXT_BASE out of bss Simon Schwarz 2011-12-05 23:16:28 +00:00
  • 754f8cb689 da850evm: pass board revision info to kernel Manjunath Hadli 2011-10-10 21:06:38 +00:00
  • e8f473548a arch/arm/include/asm/arch-omap5/clocks.h: Fix GCC 4.2 warnings Anatolij Gustschin 2011-12-03 06:46:15 +00:00
  • 164a750789 arch/arm/cpu/armv7/omap-common/clocks-common.c: Fix GCC 4.6 warnings Anatolij Gustschin 2011-12-03 06:46:14 +00:00
  • b0a86a27ee arch/arm/cpu/armv7/omap-common/spl.c: Fix GCC 4.2 warnings Anatolij Gustschin 2011-12-03 06:46:13 +00:00
  • fda241d59d MX35: flea3: changes due to hardware revision B Stefano Babic 2011-11-25 09:08:36 +01:00
  • 40f6fffee5 MX: serial_mxc: cleanup removing nasty #ifdef Stefano Babic 2011-11-22 15:22:39 +01:00
  • 5a42cd33d5 M28: Fix OB1 bug in GPIO driver Robert Deliën 2011-11-22 04:14:22 +00:00
  • aa72e43bb7 MXS: Add static annotations to dma driver Marek Vasut 2011-11-23 10:59:13 +00:00
  • 12dab4ce85 apbh_dma: return error value on timeout Wolfram Sang 2011-11-18 01:17:44 +00:00
  • 5572395482 Efika: Configure additional regulators for HDMI output Marek Vasut 2011-09-28 02:19:57 +00:00
  • 5acc907294 mx5: Correct a warning in clock.c Simon Glass 2011-11-05 04:25:22 +00:00
  • 761e83a9a9 MC13892: Add REGMODE0 bits definitions Marek Vasut 2011-09-28 02:07:26 +00:00
  • 58aef72d89 mx51evk: Configure the pins as GPIOs prior to using gpio_get_value Fabio Estevam 2011-11-15 05:51:33 +00:00
  • 3ee3729e95 mx53smd: Configure the pins as GPIOs prior to using gpio_get_value Fabio Estevam 2011-11-15 05:51:32 +00:00
  • a146dca5c2 mx53evk: Configure the pins as GPIOs prior to using gpio_get_value Fabio Estevam 2011-11-15 05:51:31 +00:00
  • d59c33a1f3 mx53ard: Configure the pins as GPIOs prior to using gpio_get_value Fabio Estevam 2011-11-15 05:51:30 +00:00
  • 73128aad58 mx53loco: Configure the pins as GPIOs prior to using gpio_get_value Fabio Estevam 2011-11-15 05:51:29 +00:00
  • ee08a8260a OMAP3: Add SPL_BOARD_INIT hook Tom Rini 2011-11-23 05:13:06 +00:00
  • d067cc464f AM3517 CraneBoard: Add SPL support Tom Rini 2011-11-18 12:48:11 +00:00
  • 5059a2a471 AM3517: Add SPL support Tom Rini 2011-11-18 12:48:10 +00:00
  • 673283f3fc OMAP3: Add SPL support to omap3_evm Tom Rini 2011-11-18 12:48:09 +00:00
  • 75c57a3570 OMAP3: Add SPL support to Beagleboard Tom Rini 2011-11-18 12:48:08 +00:00
  • 4e647e1207 OMAP3 SPL: Add identify_nand_chip function Tom Rini 2011-11-18 12:48:07 +00:00
  • 9ae0d55074 OMAP3 SPL: Rework memory initalization and devkit8000 support Tom Rini 2011-11-18 12:48:06 +00:00
  • fc41ba1e2b OMAP3: Suffix all Micron memory timing parts with their speed Tom Rini 2011-11-18 12:48:05 +00:00
  • 1be1433b83 OMAP3: Add optimal SDRC autorefresh control values Tom Rini 2011-11-18 12:48:04 +00:00
  • 14ca3dee80 omap3: mem: Add MCFG helper macro Tom Rini 2011-11-18 12:48:03 +00:00
  • 50e7ff0369 OMAP3: Remove get_mem_type prototype Tom Rini 2011-11-18 12:48:02 +00:00
  • 3bd8437dcc OMAP3: Change mem_ok to clear again after reading back Tom Rini 2011-11-18 12:48:01 +00:00
  • 2a04e85870 OMAP3: Add a helper function to set timings in SDRC Tom Rini 2011-11-18 12:48:00 +00:00
  • 5f862b7179 OMAP3: Update SDRC dram_init to always call make_cs1_contiguous() Tom Rini 2011-11-18 12:47:59 +00:00
  • b7eb9e7895 omap3: mem: Comment enable_gpmc_cs_config more Tom Rini 2011-11-18 12:47:58 +00:00
  • b609009801 ARM: davici_emac: Fix condition for number of phy detects Prabhakar Lad 2011-11-17 02:53:23 +00:00
  • 5cb939fb04 arm: printf() is not available in some SPL configurations Christian Riesch 2011-11-29 00:11:03 +00:00
  • f7264c36cd arm, davinci: add support for am1808 based enbw_cmc board Heiko Schocher 2011-11-29 02:33:47 +00:00
  • 5b51e7f3ca arm, davinci: move misc function in arch tree Heiko Schocher 2011-11-29 02:33:46 +00:00
  • 8a73e561fe arm, board/davinci/common/misc.c: Codingstyle cleanup Heiko Schocher 2011-11-29 02:33:45 +00:00
  • 7f34b1163a arm, davinci, da850: add uart1 tx rx pinmux config Heiko Schocher 2011-11-29 02:33:44 +00:00
  • b5ce18a235 arm, davinci: move davinci_rtc struct to hardware.h Heiko Schocher 2011-11-29 02:33:43 +00:00
  • 65204715bd arm, davinci: Remove duplication of pinmux configuration code Christian Riesch 2011-11-28 23:46:20 +00:00
  • e8c856d288 arm, hawkboard: Use the pinmux configurations defined in the arch tree Christian Riesch 2011-11-28 23:46:19 +00:00
  • 52b0f877a2 arm, da850evm: Use the pinmux configurations defined in the arch tree Christian Riesch 2011-11-28 23:46:18 +00:00
  • 516fb1c4c0 arm, da850: Add pinmux configurations to the arch tree Christian Riesch 2011-11-28 23:46:17 +00:00
  • 591d8019a1 arm, da850evm: Do pinmux configuration for EMAC together with other pinmuxes Christian Riesch 2011-11-28 23:46:16 +00:00
  • e5b9aa9e9c arm, hawkboard: Remove obsolete struct pinmux_config i2c_pins Christian Riesch 2011-11-28 23:46:15 +00:00
  • 964930bcfd arm, davinci: Move pinmux functions from board to arch tree Christian Riesch 2011-11-28 23:46:14 +00:00
  • ca4b55800e arm, arm926ejs: always do cpu critical inits Heiko Schocher 2011-11-09 20:06:23 +00:00
  • ff62fb4c6a omap_gpmc: use SOFTECC in SPL if it's enabled Ilya Yanok 2011-11-28 06:37:38 +00:00
  • 1df308e5be nand_spl_simple: add support for software ECC Ilya Yanok 2011-11-28 06:37:37 +00:00
  • ad2a7909a1 AM3517: move AM3517 specific mux defines to generic header Ilya Yanok 2011-11-28 06:37:36 +00:00
  • b9e65a797b AM35xx: add EMAC support Ilya Yanok 2011-11-28 06:37:35 +00:00
  • 80deda5d8e davinci_emac: hardcode 100Mbps for AM35xx and RMII Ilya Yanok 2011-11-28 06:37:34 +00:00
  • 2aa8720257 davinci_emac: fix for running with dcache enabled Ilya Yanok 2011-11-28 06:37:33 +00:00
  • 2f3427ccb9 arm926ejs: add noop implementation for dcache ops Ilya Yanok 2011-11-28 06:37:32 +00:00
  • 918588cfd3 davinci_emac: conditionally compile specific PHY support Ilya Yanok 2011-11-28 06:37:31 +00:00
  • 82b772178d davinci_emac: use internal addresses in buffer descriptors Ilya Yanok 2011-11-28 06:37:30 +00:00
  • 7c587d320d davinci_emac: move arch-independent defines to separate header Ilya Yanok 2011-11-28 06:37:29 +00:00
  • 27b8c8f267 BeagleBoard: config: Really switch to ttyO2 Koen Kooi 2011-11-27 03:51:06 +00:00
  • 10e2568d03 ARM: davinci_dm6467Tevm: Fix build breakage Anatolij Gustschin 2011-11-27 10:16:07 +00:00
  • 81dcf8bb11 ARM: OMAP: Remove STACKSIZE for IRQ and FIQ if unused Thomas Weber 2011-11-26 10:30:57 +00:00
  • 0997561de9 ARM: OMAP3: Remove unused define SDRC_R_C_B Thomas Weber 2011-11-26 10:30:56 +00:00
  • 8152c6f6f5 ARM: OMAP3: Remove unused define CONFIG_OMAP3430 Thomas Weber 2011-11-26 10:30:55 +00:00
  • 23e9f0723e omap4: fix IO setting Aneesh V 2011-11-21 23:39:05 +00:00
  • f6ddfdd3a9 omap4+: streamline CONFIG_SYS_TEXT_BASE and other SDRAM addresses Aneesh V 2011-11-21 23:39:04 +00:00
  • 9404758e9b omap4460: add ES1.1 identification Aneesh V 2011-11-21 23:39:03 +00:00
  • 4324c118a0 omap4: emif: fix error in driver Aneesh V 2011-11-21 23:39:02 +00:00
  • 473673a5c8 omap: remove I2C from SPL Aneesh V 2011-11-21 23:39:01 +00:00
  • cd5847ac3a omap4460: fix TPS initialization Aneesh V 2011-11-21 23:39:00 +00:00
  • 8e40852f0d omap: fix cache line size for omap3/omap4 boards Aneesh V 2011-11-21 23:38:59 +00:00
  • d71a4916d6 omap4: ttyO2 instead of ttyS2 in default bootargs Aneesh V 2011-11-21 23:38:58 +00:00
  • 28a181ff81 omap: Improve PLL parameter calculation tool Aneesh V 2011-11-21 23:38:57 +00:00
  • e4fce34e7a start.S: remove omap3 specific code from start.S Aneesh V 2011-11-21 23:34:01 +00:00
  • a8c686399f armv7: setup vector Aneesh V 2011-11-21 23:34:00 +00:00
  • 87d3da7b01 armv7: include armv7/cpu.c in SPL build Aneesh V 2011-11-21 23:33:59 +00:00
  • dc7100f408 armv7: disable L2 cache in cleanup_before_linux() Aneesh V 2011-11-21 23:33:58 +00:00
  • 8f1da53508 arm, arm926ejs: Fix clear bss loop for zero length bss Christian Riesch 2011-11-30 22:27:37 +00:00
  • ef426d45cc PXA: Move colibri_pxa270 to board/toradex/ Marek Vasut 2011-11-26 11:29:36 +01:00
  • 67a1f00c7c PXA: Flip colibri_pxa27x to pxa-common.h Marek Vasut 2011-11-26 11:27:50 +01:00
  • cd0f3d2eb8 PXA: Introduce common configuration header for PXA Marek Vasut 2011-11-26 11:27:30 +01:00
  • f68d2a222f PXA: Rename pxa_dram_init to pxa2xx_dram_init Marek Vasut 2011-11-26 11:18:57 +01:00
  • 4438a45f4d PXA: Squash extern pxa_dram_init() Marek Vasut 2011-11-26 11:17:32 +01:00
  • 77b04c578c PXA: Export cpu_is_ and pxa_dram_init functions Marek Vasut 2011-11-26 11:17:09 +01:00
  • f9f5486c74 PXA: Cleanup Colibri PXA270 Marek Vasut 2011-11-26 07:15:36 +01:00
  • d1bb9443f0 PXA: Replace timer driver Marek Vasut 2011-11-26 10:02:41 +01:00
  • e8de0fa896 PXA: Add cpuinfo display for PXA2xx Marek Vasut 2011-11-26 08:11:32 +01:00
  • d10237d275 PXA: Separate PXA2xx CPU init Marek Vasut 2011-11-26 07:32:24 +01:00
  • abc20aba18 PXA: Rename CONFIG_PXA2[57]X to CONFIG_CPU_PXA2[57]X Marek Vasut 2011-11-26 07:20:07 +01:00
  • 3e43c749f2 PXA: Unify vpac270 environment size Marek Vasut 2011-11-13 01:40:46 +01:00
  • 7c7204db35 PXA: Enable command line editing for vpac270 Marek Vasut 2011-11-12 03:35:50 +01:00
  • 411b9eaf55 PXA: Adapt Voipac PXA270 to OneNAND SPL Marek Vasut 2011-10-31 14:17:21 +01:00
  • 496471df9e PXA: Drop Voipac PXA270 OneNAND IPL Marek Vasut 2011-10-31 13:11:48 +01:00
  • 00d5ec937d PXA: Fixup PXA25x boards after start.S update Marek Vasut 2011-11-26 12:04:11 +01:00
  • 7f4cfcf40d PXA: Re-add the Dcache locking as RAM for pxa250 Marek Vasut 2011-11-05 19:26:47 +01:00