// SPDX-License-Identifier: (GPL-2.0+ or MIT) /dts-v1/; #include "sun8i-a33.dtsi" #include "sun8i-reference-design-tablet.dtsi" / { model = "iNet U70B REV01"; compatible = "inet-tek,inet-u70b-rev01", "allwinner,sun8i-a33"; aliases { ethernet0 = &rtl8723bs; }; panel: panel { backlight = <&backlight>; enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ power-supply = <®_dc1sw>; port { panel_in_tcon0: endpoint { remote-endpoint = <&tcon0_out_panel>; }; }; }; speaker_amp: audio-amplifier { compatible = "simple-audio-amplifier"; enable-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ sound-name-prefix = "Speaker Amp"; }; wifi_pwrseq: wifi-pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&r_pio 0 6 GPIO_ACTIVE_LOW>; /* PL6 */ }; }; &codec { status = "okay"; }; &dai { status = "okay"; }; &de { status = "okay"; }; &i2c1 { clock-frequency = <400000>; accelerometer@18 { compatible = "bosch,bma250"; reg = <0x18>; interrupt-parent = <&pio>; interrupts = <7 10 IRQ_TYPE_EDGE_RISING>; /* PH10 / EINT10 */ }; }; &mmc1 { pinctrl-0 = <&mmc1_pg_pins>; pinctrl-names = "default"; bus-width = <4>; non-removable; vmmc-supply = <®_dldo1>; status = "okay"; rtl8723bs: wifi@1 { reg = <1>; interrupt-parent = <&r_pio>; interrupts = <0 7 IRQ_TYPE_LEVEL_LOW>; /* PL7 */ }; }; &nfc { status = "okay"; }; &simplefb_lcd { status = "okay"; }; &sound { simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>; simple-audio-card,widgets = "Headphone", "Headphone Jack", "Microphone", "Internal Microphone", "Speaker", "Internal Speaker"; simple-audio-card,routing = "Headphone Jack", "HP", "Internal Speaker", "Speaker Amp OUTL", "Internal Speaker", "Speaker Amp OUTR", "Speaker Amp INL", "HP", /* PHONEOUT ??? */ "Speaker Amp INR", "HP", /* PHONEOUT ??? */ "Left DAC", "DACL", "Right DAC", "DACR", "ADCL", "Left ADC", "ADCR", "Right ADC", "MIC1", "Internal Microphone", "MIC2", "Headset Microphone", "Headset Microphone", "HBIAS", "Internal Microphone", "MBIAS"; status = "okay"; }; &tcon0 { pinctrl-0 = <&lcd_rgb666_pins>; pinctrl-names = "default"; status = "okay"; }; &tcon0_out { tcon0_out_panel: endpoint { remote-endpoint = <&panel_in_tcon0>; }; }; &touchscreen { reg = <0x40>; compatible = "silead,gsl1680"; avdd-supply = <®_ldo_io1>; touchscreen-size-x = <1024>; touchscreen-size-y = <600>; status = "okay"; }; &uart1 { pinctrl-0 = <&uart1_pg_pins>, <&uart1_cts_rts_pg_pins>; pinctrl-names = "default"; status = "okay"; bluetooth { compatible = "realtek,rtl8723cs-bt"; device-wake-gpios = <&r_pio 0 10 GPIO_ACTIVE_LOW>; /* PL10 */ enable-gpios = <&r_pio 0 8 GPIO_ACTIVE_HIGH>; /* PL8 */ host-wake-gpios = <&r_pio 0 9 GPIO_ACTIVE_HIGH>; /* PL9 */ }; };