mirror of
https://github.com/smaeul/u-boot.git
synced 2025-09-11 20:46:00 +01:00
099f3145b4
Currently NAND clock setup is done in board code, both in SPL and in U-Boot proper. Add the NAND clocks/resets here so they can be used by the "full" NAND driver once it is converted to the driver model. The bit locations are copied from the Linux CCU drivers. Signed-off-by: Samuel Holland <samuel@sholland.org>
111 lines
3.6 KiB
C
111 lines
3.6 KiB
C
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
/*
|
|
* Copyright (C) 2018 Amarula Solutions.
|
|
* Author: Jagan Teki <jagan@amarulasolutions.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk-uclass.h>
|
|
#include <dm.h>
|
|
#include <errno.h>
|
|
#include <clk/sunxi.h>
|
|
#include <dt-bindings/clock/sun8i-r40-ccu.h>
|
|
#include <dt-bindings/reset/sun8i-r40-ccu.h>
|
|
#include <linux/bitops.h>
|
|
|
|
static struct ccu_clk_gate r40_gates[] = {
|
|
[CLK_BUS_MMC0] = GATE(0x060, BIT(8)),
|
|
[CLK_BUS_MMC1] = GATE(0x060, BIT(9)),
|
|
[CLK_BUS_MMC2] = GATE(0x060, BIT(10)),
|
|
[CLK_BUS_MMC3] = GATE(0x060, BIT(11)),
|
|
[CLK_BUS_NAND] = GATE(0x060, BIT(13)),
|
|
[CLK_BUS_SPI0] = GATE(0x060, BIT(20)),
|
|
[CLK_BUS_SPI1] = GATE(0x060, BIT(21)),
|
|
[CLK_BUS_SPI2] = GATE(0x060, BIT(22)),
|
|
[CLK_BUS_SPI3] = GATE(0x060, BIT(23)),
|
|
[CLK_BUS_OTG] = GATE(0x060, BIT(25)),
|
|
[CLK_BUS_EHCI0] = GATE(0x060, BIT(26)),
|
|
[CLK_BUS_EHCI1] = GATE(0x060, BIT(27)),
|
|
[CLK_BUS_EHCI2] = GATE(0x060, BIT(28)),
|
|
[CLK_BUS_OHCI0] = GATE(0x060, BIT(29)),
|
|
[CLK_BUS_OHCI1] = GATE(0x060, BIT(30)),
|
|
[CLK_BUS_OHCI2] = GATE(0x060, BIT(31)),
|
|
|
|
[CLK_BUS_GMAC] = GATE(0x064, BIT(17)),
|
|
|
|
[CLK_BUS_PIO] = GATE(0x068, BIT(5)),
|
|
|
|
[CLK_BUS_I2C0] = GATE(0x06c, BIT(0)),
|
|
[CLK_BUS_I2C1] = GATE(0x06c, BIT(1)),
|
|
[CLK_BUS_I2C2] = GATE(0x06c, BIT(2)),
|
|
[CLK_BUS_I2C3] = GATE(0x06c, BIT(3)),
|
|
[CLK_BUS_I2C4] = GATE(0x06c, BIT(15)),
|
|
[CLK_BUS_UART0] = GATE(0x06c, BIT(16)),
|
|
[CLK_BUS_UART1] = GATE(0x06c, BIT(17)),
|
|
[CLK_BUS_UART2] = GATE(0x06c, BIT(18)),
|
|
[CLK_BUS_UART3] = GATE(0x06c, BIT(19)),
|
|
[CLK_BUS_UART4] = GATE(0x06c, BIT(20)),
|
|
[CLK_BUS_UART5] = GATE(0x06c, BIT(21)),
|
|
[CLK_BUS_UART6] = GATE(0x06c, BIT(22)),
|
|
[CLK_BUS_UART7] = GATE(0x06c, BIT(23)),
|
|
|
|
[CLK_NAND] = GATE(0x080, BIT(31)),
|
|
[CLK_SPI0] = GATE(0x0a0, BIT(31)),
|
|
[CLK_SPI1] = GATE(0x0a4, BIT(31)),
|
|
[CLK_SPI2] = GATE(0x0a8, BIT(31)),
|
|
[CLK_SPI3] = GATE(0x0ac, BIT(31)),
|
|
|
|
[CLK_USB_PHY0] = GATE(0x0cc, BIT(8)),
|
|
[CLK_USB_PHY1] = GATE(0x0cc, BIT(9)),
|
|
[CLK_USB_PHY2] = GATE(0x0cc, BIT(10)),
|
|
[CLK_USB_OHCI0] = GATE(0x0cc, BIT(16)),
|
|
[CLK_USB_OHCI1] = GATE(0x0cc, BIT(17)),
|
|
[CLK_USB_OHCI2] = GATE(0x0cc, BIT(18)),
|
|
};
|
|
|
|
static struct ccu_reset r40_resets[] = {
|
|
[RST_USB_PHY0] = RESET(0x0cc, BIT(0)),
|
|
[RST_USB_PHY1] = RESET(0x0cc, BIT(1)),
|
|
[RST_USB_PHY2] = RESET(0x0cc, BIT(2)),
|
|
|
|
[RST_BUS_MMC0] = RESET(0x2c0, BIT(8)),
|
|
[RST_BUS_MMC1] = RESET(0x2c0, BIT(9)),
|
|
[RST_BUS_MMC2] = RESET(0x2c0, BIT(10)),
|
|
[RST_BUS_MMC3] = RESET(0x2c0, BIT(11)),
|
|
[RST_BUS_NAND] = RESET(0x2c0, BIT(13)),
|
|
[RST_BUS_SPI0] = RESET(0x2c0, BIT(20)),
|
|
[RST_BUS_SPI1] = RESET(0x2c0, BIT(21)),
|
|
[RST_BUS_SPI2] = RESET(0x2c0, BIT(22)),
|
|
[RST_BUS_SPI3] = RESET(0x2c0, BIT(23)),
|
|
[RST_BUS_OTG] = RESET(0x2c0, BIT(25)),
|
|
[RST_BUS_EHCI0] = RESET(0x2c0, BIT(26)),
|
|
[RST_BUS_EHCI1] = RESET(0x2c0, BIT(27)),
|
|
[RST_BUS_EHCI2] = RESET(0x2c0, BIT(28)),
|
|
[RST_BUS_OHCI0] = RESET(0x2c0, BIT(29)),
|
|
[RST_BUS_OHCI1] = RESET(0x2c0, BIT(30)),
|
|
[RST_BUS_OHCI2] = RESET(0x2c0, BIT(31)),
|
|
|
|
[RST_BUS_GMAC] = RESET(0x2c4, BIT(17)),
|
|
|
|
[RST_BUS_I2C0] = RESET(0x2d8, BIT(0)),
|
|
[RST_BUS_I2C1] = RESET(0x2d8, BIT(1)),
|
|
[RST_BUS_I2C2] = RESET(0x2d8, BIT(2)),
|
|
[RST_BUS_I2C3] = RESET(0x2d8, BIT(3)),
|
|
[RST_BUS_I2C4] = RESET(0x2d8, BIT(15)),
|
|
[RST_BUS_UART0] = RESET(0x2d8, BIT(16)),
|
|
[RST_BUS_UART1] = RESET(0x2d8, BIT(17)),
|
|
[RST_BUS_UART2] = RESET(0x2d8, BIT(18)),
|
|
[RST_BUS_UART3] = RESET(0x2d8, BIT(19)),
|
|
[RST_BUS_UART4] = RESET(0x2d8, BIT(20)),
|
|
[RST_BUS_UART5] = RESET(0x2d8, BIT(21)),
|
|
[RST_BUS_UART6] = RESET(0x2d8, BIT(22)),
|
|
[RST_BUS_UART7] = RESET(0x2d8, BIT(23)),
|
|
};
|
|
|
|
const struct ccu_desc r40_ccu_desc = {
|
|
.gates = r40_gates,
|
|
.resets = r40_resets,
|
|
.num_gates = ARRAY_SIZE(r40_gates),
|
|
.num_resets = ARRAY_SIZE(r40_resets),
|
|
};
|