mirror of
https://github.com/smaeul/u-boot.git
synced 2025-09-15 06:26:07 +01:00
6a042f830f
[1] https://git.kernel.org/pub/scm/linux/kernel/git/devicetree/devicetree-rebasing.git Based on what "git diff" suggests, rename a device tree for imx8mm_venice_defconfig and imx8mp_venice_defconfig Signed-off-by: Tom Rini <trini@konsulko.com> --- Cc: Tim Harvey <tharvey@gateworks.com>
61 lines
1.4 KiB
YAML
61 lines
1.4 KiB
YAML
# SPDX-License-Identifier: GPL-2.0
|
|
%YAML 1.2
|
|
---
|
|
$id: http://devicetree.org/schemas/gnss/mediatek.yaml#
|
|
$schema: http://devicetree.org/meta-schemas/core.yaml#
|
|
|
|
title: Mediatek GNSS Receiver
|
|
|
|
maintainers:
|
|
- Johan Hovold <johan@kernel.org>
|
|
|
|
description:
|
|
Mediatek chipsets are used in GNSS-receiver modules produced by several
|
|
vendors and can use a UART interface.
|
|
|
|
allOf:
|
|
- $ref: gnss-common.yaml#
|
|
- $ref: /schemas/serial/serial-peripheral-props.yaml#
|
|
|
|
properties:
|
|
compatible:
|
|
const: globaltop,pa6h
|
|
|
|
vcc-supply:
|
|
description:
|
|
Main voltage regulator, pin name VCC.
|
|
|
|
reset-gpios:
|
|
maxItems: 1
|
|
description: An optional reset line, with names such as RESET or NRESET.
|
|
If the line is active low it should be flagged with GPIO_ACTIVE_LOW.
|
|
|
|
timepulse-gpios:
|
|
description: Comes with pin names such as PPS1 or 1PPS.
|
|
|
|
gnss-fix-gpios:
|
|
maxItems: 1
|
|
description: GPIO used to determine device position fix state, pin names
|
|
FIX or 3D_FIX.
|
|
|
|
vbackup-supply:
|
|
description:
|
|
Regulator providing backup voltage, pin names such as VBAT or VBACKUP.
|
|
|
|
required:
|
|
- compatible
|
|
- vcc-supply
|
|
|
|
unevaluatedProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
serial {
|
|
gnss {
|
|
compatible = "globaltop,pa6h";
|
|
vcc-supply = <&vcc_3v3>;
|
|
reset-gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|