mirror of
https://github.com/smaeul/u-boot.git
synced 2025-09-12 04:56:02 +01:00
f59d40aa55
The NanoPi R6C is a SBC by FriendlyElec based on the Rockchip RK3588s.
It comes with 4GB or 8GB of RAM, a microSD card slot, optional 32GB eMMC
storage, one M.2 M-Key connector, one RTL8211F 1GbE and one RTL8125
2.5GbE Ethernet port, one USB 2.0 Type-A and one USB 3.0 Type-A port, a
HDMI port, a 30-pin GPIO header as well as multiple buttons and LEDs.
Add initial support for this board using the upstream devicetree sources.
Tested in U-Boot proper:
- Booting from eMMC works
- 1GbE Ethernet works using the eth_eqos driver (tested by ping)
- 2.5GbE Ethernet works using the eth_rtl8169 driver (tested by ping),
but the status LEDs on this specific port currently aren't working
- NVMe SSD in M.2 socket does get recognized (tested with `nvme scan`
followed by `nvme details`)
Kernel commit:
d5f1d7437451 ("arm64: dts: rockchip: Add support for NanoPi R6C")
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Signed-off-by: Sebastian Kropatsch <seb-dev@mail.de>
13 lines
276 B
C
13 lines
276 B
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
|
|
#ifndef __NANOPI_R6C_RK3588S_H
|
|
#define __NANOPI_R6C_RK3588S_H
|
|
|
|
#define ROCKCHIP_DEVICE_SETTINGS \
|
|
"stdout=serial,vidconsole\0" \
|
|
"stderr=serial,vidconsole\0"
|
|
|
|
#include <configs/rk3588_common.h>
|
|
|
|
#endif /* __NANOPI_R6C_RK3588S_H */
|