mirror of
https://github.com/smaeul/u-boot.git
synced 2025-11-04 05:50:17 +00:00
763926915f
Fix some typos and duplicate words in gdb.rst. Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com> Acked-by: Alexander Dahl <ada@thorsis.com>
172 lines
5.3 KiB
ReStructuredText
172 lines
5.3 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
|
.. Copyright (c) 2024 Alexander Dahl
|
|
|
|
Debugging U-Boot with GDB
|
|
=========================
|
|
|
|
Using a JTAG adapter it is possible to debug a running U-Boot with GDB.
|
|
A common way is to connect a debug adapter to the JTAG connector of your
|
|
board, run a GDB server, connect GDB to the GDB server, and use GDB as usual.
|
|
|
|
Similarly, QEMU can provide a GDB server.
|
|
|
|
Preparing build
|
|
---------------
|
|
|
|
Building U-Boot with reduced optimization (-Og) and without link time
|
|
optimization is recommended for easier debugging::
|
|
|
|
CONFIG_CC_OPTIMIZE_FOR_DEBUG=y
|
|
CONFIG_LTO=n
|
|
|
|
Otherwise build, install, and run U-Boot as usual.
|
|
|
|
Using OpenOCD as GDB server
|
|
---------------------------
|
|
|
|
`OpenOCD <https://openocd.org/>`_ is an open-source tool supporting hardware
|
|
debug probes, and providing a GDB server. It is readily available in major Linux
|
|
distributions or you can build it from source.
|
|
|
|
Here is example of starting OpenOCD on Debian using a J-Link adapter and a
|
|
board with an AT91 SAMA5D2 SoC:
|
|
|
|
.. code-block:: console
|
|
|
|
$ openocd -f interface/jlink.cfg -f target/at91sama5d2.cfg -c 'adapter speed 4000'
|
|
Open On-Chip Debugger 0.12.0
|
|
Licensed under GNU GPL v2
|
|
For bug reports, read
|
|
http://openocd.org/doc/doxygen/bugs.html
|
|
Info : auto-selecting first available session transport "jtag". To override use 'transport select <transport>'.
|
|
adapter speed: 4000 kHz
|
|
|
|
Info : Listening on port 6666 for tcl connections
|
|
Info : Listening on port 4444 for telnet connections
|
|
Info : J-Link V10 compiled Jan 30 2023 11:28:07
|
|
Info : Hardware version: 10.10
|
|
Info : VTarget = 3.244 V
|
|
Info : clock speed 4000 kHz
|
|
Info : JTAG tap: at91sama5d2.cpu tap/device found: 0x5ba00477 (mfg: 0x23b (ARM Ltd), part: 0xba00, ver: 0x5)
|
|
Info : at91sama5d2.cpu_a5.0: hardware has 3 breakpoints, 2 watchpoints
|
|
Info : at91sama5d2.cpu_a5.0: MPIDR level2 0, cluster 0, core 0, mono core, no SMT
|
|
Info : starting gdb server for at91sama5d2.cpu_a5.0 on 3333
|
|
Info : Listening on port 3333 for gdb connections
|
|
|
|
Notice that OpenOCD is listening on port 3333 for GDB connections.
|
|
|
|
Using QEMU as GDB server
|
|
------------------------
|
|
|
|
When running U-Boot on QEMU you can used the '-gdb' parameter to provide a
|
|
GDB server:
|
|
|
|
qemu-system-riscv64 -M virt -nographic -gdb tcp::3333 -kernel u-boot
|
|
|
|
Running a GDB session
|
|
----------------------
|
|
|
|
You need a GDB suited for your target. This can be the GDB coming with your
|
|
toolchain or *gdb-multiarch* available in your Linux distribution.
|
|
|
|
.. prompt:: bash $
|
|
|
|
gdb-multiarch u-boot
|
|
|
|
In the above command-line *u-boot* is the U-boot binary in your build
|
|
directory. You may need to adjust the path when calling GDB.
|
|
|
|
Connect to the GDB server like this:
|
|
|
|
.. code-block:: console
|
|
|
|
(gdb) target extended-remote :3333
|
|
Remote debugging using :3333
|
|
0x27fa9ac6 in ?? ()
|
|
(gdb)
|
|
|
|
This is fine for debugging before U-Boot relocates itself.
|
|
|
|
For debugging U-Boot after relocation you need to indicate the relocation
|
|
address to GDB. You can retrieve the relocation address from the U-Boot shell
|
|
with the command *bdinfo*:
|
|
|
|
.. code-block:: console
|
|
|
|
U-Boot> bdinfo
|
|
boot_params = 0x20000100
|
|
DRAM bank = 0x00000000
|
|
-> start = 0x20000000
|
|
-> size = 0x08000000
|
|
flashstart = 0x00000000
|
|
flashsize = 0x00000000
|
|
flashoffset = 0x00000000
|
|
baudrate = 115200 bps
|
|
relocaddr = 0x27f7a000
|
|
reloc off = 0x0607a000
|
|
Build = 32-bit
|
|
current eth = ethernet@f8008000
|
|
ethaddr = 00:50:c2:31:58:d4
|
|
IP addr = <NULL>
|
|
fdt_blob = 0x27b36060
|
|
new_fdt = 0x27b36060
|
|
fdt_size = 0x00003e40
|
|
lmb_dump_all:
|
|
memory.cnt = 0x1 / max = 0x10
|
|
memory[0] [0x20000000-0x27ffffff], 0x08000000 bytes flags: 0
|
|
reserved.cnt = 0x1 / max = 0x10
|
|
reserved[0] [0x27b31d00-0x27ffffff], 0x004ce300 bytes flags: 0
|
|
devicetree = separate
|
|
arch_number = 0x00000000
|
|
TLB addr = 0x27ff0000
|
|
irq_sp = 0x27b36050
|
|
sp start = 0x27b36040
|
|
Early malloc usage: cd8 / 2000
|
|
|
|
Look out for the line starting with *relocaddr* which has the address
|
|
you need, ``0x27f7a000`` in this case.
|
|
|
|
On most architectures (not sandbox, x86, Xtensa) the global data pointer is
|
|
stored in a fixed register:
|
|
|
|
============ ========
|
|
Architecture Register
|
|
============ ========
|
|
arc r25
|
|
arm r9
|
|
arm64 x18
|
|
m68k d7
|
|
microblaze r31
|
|
mips k0
|
|
nios2 gp
|
|
powerpc r2
|
|
riscv gp
|
|
sh r13
|
|
============ ========
|
|
|
|
On these architectures the relocation address can be determined by
|
|
dereferencing the global data pointer stored in register, *r9* in the example:
|
|
|
|
.. code-block:: console
|
|
|
|
(gdb) p/x (*(struct global_data*)$r9)->relocaddr
|
|
$1 = 0x27f7a000
|
|
|
|
In the GDB shell discard the previously loaded symbol file and add it once
|
|
again, with the relocation address like this:
|
|
|
|
.. code-block:: console
|
|
|
|
(gdb) symbol-file
|
|
Discard symbol table from `/home/adahl/build/u-boot/v2024.04.x/u-boot'? (y or n) y
|
|
No symbol file now.
|
|
(gdb) add-symbol-file u-boot 0x27f7a000
|
|
add symbol table from file "u-boot" at
|
|
.text_addr = 0x27f7a000
|
|
(y or n) y
|
|
Reading symbols from u-boot...
|
|
(gdb)
|
|
|
|
You can now use GDB as usual, setting breakpoints, printing backtraces,
|
|
inspecting variables, stepping through the code, etc.
|