mirror of
https://github.com/smaeul/u-boot.git
synced 2025-11-03 21:48:15 +00:00
e2ffd59b4d
* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for additional ethernet addresses. * Cleanup drivers/i82365.c - avoid duplication of code * Fix bogus "cannot span across banks" flash error message * Add support for CompactFlash for the CPC45 Board.
469 lines
11 KiB
C
469 lines
11 KiB
C
/*
|
|
* (C) Copyright 2003-2004
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* (C) Copyright 2004
|
|
* Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
|
|
*
|
|
* Modified for the CMC PU2 by (C) Copyright 2004 Gary Jennejohn
|
|
* garyj@denx.de
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
|
|
#ifndef CFG_ENV_ADDR
|
|
#define CFG_ENV_ADDR (CFG_FLASH_BASE + CFG_ENV_OFFSET)
|
|
#endif
|
|
|
|
flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
|
|
|
|
#define FLASH_CYCLE1 0x0555
|
|
#define FLASH_CYCLE2 0x02AA
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Functions
|
|
*/
|
|
static ulong flash_get_size(vu_short *addr, flash_info_t *info);
|
|
static void flash_reset(flash_info_t *info);
|
|
static int write_word_amd(flash_info_t *info, vu_short *dest, ushort data);
|
|
static flash_info_t *flash_get_info(ulong base);
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* flash_init()
|
|
*
|
|
* sets up flash_info and returns size of FLASH (bytes)
|
|
*/
|
|
unsigned long flash_init (void)
|
|
{
|
|
unsigned long size = 0;
|
|
ulong flashbase = CFG_FLASH_BASE;
|
|
|
|
/* Init: no FLASHes known */
|
|
memset(&flash_info[0], 0, sizeof(flash_info_t));
|
|
|
|
flash_info[0].size = flash_get_size((vu_short *)flashbase, &flash_info[0]);
|
|
|
|
size = flash_info[0].size;
|
|
|
|
#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
|
|
/* monitor protection ON by default */
|
|
flash_protect(FLAG_PROTECT_SET,
|
|
CFG_MONITOR_BASE,
|
|
CFG_MONITOR_BASE+monitor_flash_len-1,
|
|
flash_get_info(CFG_MONITOR_BASE));
|
|
#endif
|
|
|
|
#ifdef CFG_ENV_IS_IN_FLASH
|
|
/* ENV protection ON by default */
|
|
flash_protect(FLAG_PROTECT_SET,
|
|
CFG_ENV_ADDR,
|
|
CFG_ENV_ADDR+CFG_ENV_SIZE-1,
|
|
flash_get_info(CFG_ENV_ADDR));
|
|
#endif
|
|
|
|
return size ? size : 1;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
static void flash_reset(flash_info_t *info)
|
|
{
|
|
vu_short *base = (vu_short *)(info->start[0]);
|
|
|
|
/* Put FLASH back in read mode */
|
|
if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
|
|
*base = 0x00FF; /* Intel Read Mode */
|
|
else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
|
|
*base = 0x00F0; /* AMD Read Mode */
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
static flash_info_t *flash_get_info(ulong base)
|
|
{
|
|
int i;
|
|
flash_info_t * info;
|
|
|
|
info = NULL;
|
|
for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
|
|
info = & flash_info[i];
|
|
if (info->size && info->start[0] <= base &&
|
|
base <= info->start[0] + info->size - 1)
|
|
break;
|
|
}
|
|
|
|
return i == CFG_MAX_FLASH_BANKS ? 0 : info;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
void flash_print_info (flash_info_t *info)
|
|
{
|
|
int i;
|
|
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
printf ("missing or unknown FLASH type\n");
|
|
return;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_VENDMASK) {
|
|
case FLASH_MAN_AMD: printf ("AMD "); break;
|
|
case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break;
|
|
case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
|
|
case FLASH_MAN_SST: printf ("SST "); break;
|
|
case FLASH_MAN_STM: printf ("STM "); break;
|
|
case FLASH_MAN_INTEL: printf ("INTEL "); break;
|
|
default: printf ("Unknown Vendor "); break;
|
|
}
|
|
|
|
switch (info->flash_id & FLASH_TYPEMASK) {
|
|
case FLASH_S29GL064M:
|
|
printf ("S29GL064M-R6 (64Mbit, uniform sector size)\n");
|
|
break;
|
|
default:
|
|
printf ("Unknown Chip Type\n");
|
|
break;
|
|
}
|
|
|
|
printf (" Size: %ld MB in %d Sectors\n",
|
|
info->size >> 20,
|
|
info->sector_count);
|
|
|
|
printf (" Sector Start Addresses:");
|
|
|
|
for (i=0; i<info->sector_count; ++i) {
|
|
if ((i % 5) == 0) {
|
|
printf ("\n ");
|
|
}
|
|
printf (" %08lX%s",
|
|
info->start[i],
|
|
info->protect[i] ? " (RO)" : " ");
|
|
}
|
|
printf ("\n");
|
|
return;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
/*
|
|
* The following code cannot be run from FLASH!
|
|
*/
|
|
|
|
ulong flash_get_size (vu_short *addr, flash_info_t *info)
|
|
{
|
|
int i;
|
|
ushort value;
|
|
ulong base = (ulong)addr;
|
|
|
|
/* Write auto select command sequence */
|
|
addr[FLASH_CYCLE1] = 0x00AA; /* for AMD, Intel ignores this */
|
|
addr[FLASH_CYCLE2] = 0x0055; /* for AMD, Intel ignores this */
|
|
addr[FLASH_CYCLE1] = 0x0090; /* selects Intel or AMD */
|
|
|
|
/* read Manufacturer ID */
|
|
udelay(100);
|
|
value = addr[0];
|
|
debug ("Manufacturer ID: %04X\n", value);
|
|
|
|
switch (value) {
|
|
|
|
case (AMD_MANUFACT & 0xFFFF):
|
|
debug ("Manufacturer: AMD (Spansion)\n");
|
|
info->flash_id = FLASH_MAN_AMD;
|
|
break;
|
|
|
|
case (INTEL_MANUFACT & 0xFFFF):
|
|
debug ("Manufacturer: Intel (not supported yet)\n");
|
|
info->flash_id = FLASH_MAN_INTEL;
|
|
break;
|
|
|
|
default:
|
|
printf ("Unknown Manufacturer ID: %04X\n", value);
|
|
info->flash_id = FLASH_UNKNOWN;
|
|
info->sector_count = 0;
|
|
info->size = 0;
|
|
goto out;
|
|
}
|
|
|
|
value = addr[1];
|
|
debug ("Device ID: %04X\n", value);
|
|
|
|
switch (addr[1]) {
|
|
|
|
case (AMD_ID_MIRROR & 0xFFFF):
|
|
debug ("Mirror Bit flash: addr[14] = %08X addr[15] = %08X\n",
|
|
addr[14], addr[15]);
|
|
|
|
switch(addr[14]) {
|
|
case (AMD_ID_GL064M_2 & 0xFFFF):
|
|
if (addr[15] != (AMD_ID_GL064M_3 & 0xffff)) {
|
|
printf ("Chip: S29GLxxxM -> unknown\n");
|
|
info->flash_id = FLASH_UNKNOWN;
|
|
info->sector_count = 0;
|
|
info->size = 0;
|
|
} else {
|
|
debug ("Chip: S29GL064M-R6\n");
|
|
info->flash_id += FLASH_S29GL064M;
|
|
info->sector_count = 128;
|
|
info->size = 0x00800000;
|
|
for (i = 0; i < info->sector_count; i++) {
|
|
info->start[i] = base;
|
|
base += 0x10000;
|
|
}
|
|
}
|
|
break; /* => 16 MB */
|
|
default:
|
|
printf ("Chip: *** unknown ***\n");
|
|
info->flash_id = FLASH_UNKNOWN;
|
|
info->sector_count = 0;
|
|
info->size = 0;
|
|
break;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
printf ("Unknown Device ID: %04X\n", value);
|
|
info->flash_id = FLASH_UNKNOWN;
|
|
info->sector_count = 0;
|
|
info->size = 0;
|
|
break;
|
|
}
|
|
|
|
out:
|
|
/* Put FLASH back in read mode */
|
|
flash_reset(info);
|
|
|
|
return (info->size);
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
int flash_erase (flash_info_t *info, int s_first, int s_last)
|
|
{
|
|
vu_short *addr = (vu_short *)(info->start[0]);
|
|
int flag, prot, sect, ssect, l_sect;
|
|
ulong now, last;
|
|
|
|
debug ("flash_erase: first: %d last: %d\n", s_first, s_last);
|
|
|
|
if ((s_first < 0) || (s_first > s_last)) {
|
|
if (info->flash_id == FLASH_UNKNOWN) {
|
|
printf ("- missing\n");
|
|
} else {
|
|
printf ("- no sectors to erase\n");
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
if ((info->flash_id == FLASH_UNKNOWN) ||
|
|
(info->flash_id > FLASH_AMD_COMP)) {
|
|
printf ("Can't erase unknown flash type %08lx - aborted\n",
|
|
info->flash_id);
|
|
return 1;
|
|
}
|
|
|
|
prot = 0;
|
|
for (sect=s_first; sect<=s_last; ++sect) {
|
|
if (info->protect[sect]) {
|
|
prot++;
|
|
}
|
|
}
|
|
|
|
if (prot) {
|
|
printf ("- Warning: %d protected sectors will not be erased!\n",
|
|
prot);
|
|
} else {
|
|
printf ("\n");
|
|
}
|
|
|
|
/* Disable interrupts which might cause a timeout here */
|
|
flag = disable_interrupts();
|
|
|
|
/*
|
|
* Start erase on unprotected sectors.
|
|
* Since the flash can erase multiple sectors with one command
|
|
* we take advantage of that by doing the erase in chunks of
|
|
* 3 sectors.
|
|
*/
|
|
for (sect = s_first; sect <= s_last; ) {
|
|
l_sect = -1;
|
|
|
|
addr[FLASH_CYCLE1] = 0x00AA;
|
|
addr[FLASH_CYCLE2] = 0x0055;
|
|
addr[FLASH_CYCLE1] = 0x0080;
|
|
addr[FLASH_CYCLE1] = 0x00AA;
|
|
addr[FLASH_CYCLE2] = 0x0055;
|
|
|
|
/* do the erase in chunks of at most 3 sectors */
|
|
for (ssect = 0; ssect < 3; ssect++) {
|
|
if ((sect + ssect) > s_last)
|
|
break;
|
|
if (info->protect[sect + ssect] == 0) { /* not protected */
|
|
addr = (vu_short *)(info->start[sect + ssect]);
|
|
addr[0] = 0x0030;
|
|
l_sect = sect + ssect;
|
|
}
|
|
}
|
|
/* wait at least 80us - let's wait 1 ms */
|
|
udelay (1000);
|
|
|
|
/*
|
|
* We wait for the last triggered sector
|
|
*/
|
|
if (l_sect < 0)
|
|
goto DONE;
|
|
|
|
reset_timer_masked ();
|
|
last = 0;
|
|
addr = (vu_short *)(info->start[l_sect]);
|
|
while ((addr[0] & 0x0080) != 0x0080) {
|
|
if ((now = get_timer_masked ()) > CFG_FLASH_ERASE_TOUT) {
|
|
printf ("Timeout\n");
|
|
return 1;
|
|
}
|
|
/* show that we're waiting */
|
|
if ((now - last) > 1000) { /* every second */
|
|
putc ('.');
|
|
last = now;
|
|
}
|
|
}
|
|
addr = (vu_short *)info->start[0];
|
|
addr[0] = 0x00F0; /* reset bank */
|
|
sect += ssect;
|
|
}
|
|
|
|
/* re-enable interrupts if necessary */
|
|
if (flag)
|
|
enable_interrupts();
|
|
|
|
DONE:
|
|
/* reset to read mode */
|
|
addr = (vu_short *)info->start[0];
|
|
addr[0] = 0x00F0; /* reset bank */
|
|
|
|
printf (" done\n");
|
|
return 0;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Copy memory to flash, returns:
|
|
* 0 - OK
|
|
* 1 - write timeout
|
|
* 2 - Flash not erased
|
|
*/
|
|
|
|
int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
|
|
{
|
|
ulong wp, data;
|
|
int rc;
|
|
|
|
if (addr & 1) {
|
|
printf ("unaligned destination not supported\n");
|
|
return ERR_ALIGN;
|
|
};
|
|
|
|
if ((int) src & 1) {
|
|
printf ("unaligned source not supported\n");
|
|
return ERR_ALIGN;
|
|
};
|
|
|
|
wp = addr;
|
|
|
|
while (cnt >= 2) {
|
|
data = *((vu_short *)src);
|
|
if ((rc = write_word_amd(info, (vu_short *)wp, data)) != 0) {
|
|
printf ("write_buff 1: write_word_amd() rc=%d\n", rc);
|
|
return (rc);
|
|
}
|
|
src += 2;
|
|
wp += 2;
|
|
cnt -= 2;
|
|
}
|
|
|
|
if (cnt == 0) {
|
|
return (ERR_OK);
|
|
}
|
|
|
|
if (cnt == 1) {
|
|
data = (*((volatile u8 *) src)) | (*((volatile u8 *) (wp + 1)) << 8);
|
|
if ((rc = write_word_amd(info, (vu_short *)wp, data)) != 0) {
|
|
printf ("write_buff 1: write_word_amd() rc=%d\n", rc);
|
|
return (rc);
|
|
}
|
|
src += 1;
|
|
wp += 1;
|
|
cnt -= 1;
|
|
}
|
|
|
|
return ERR_OK;
|
|
}
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Write a word to Flash for AMD FLASH
|
|
* A word is 16 or 32 bits, whichever the bus width of the flash bank
|
|
* (not an individual chip) is.
|
|
*
|
|
* returns:
|
|
* 0 - OK
|
|
* 1 - write timeout
|
|
* 2 - Flash not erased
|
|
*/
|
|
static int write_word_amd (flash_info_t *info, vu_short *dest, ushort data)
|
|
{
|
|
int flag;
|
|
vu_short *base; /* first address in flash bank */
|
|
|
|
/* Check if Flash is (sufficiently) erased */
|
|
if ((*dest & data) != data) {
|
|
return (2);
|
|
}
|
|
|
|
base = (vu_short *)(info->start[0]);
|
|
|
|
/* Disable interrupts which might cause a timeout here */
|
|
flag = disable_interrupts();
|
|
|
|
base[FLASH_CYCLE1] = 0x00AA; /* unlock */
|
|
base[FLASH_CYCLE2] = 0x0055; /* unlock */
|
|
base[FLASH_CYCLE1] = 0x00A0; /* selects program mode */
|
|
|
|
*dest = data; /* start programming the data */
|
|
|
|
/* re-enable interrupts if necessary */
|
|
if (flag)
|
|
enable_interrupts();
|
|
|
|
reset_timer_masked ();
|
|
|
|
/* data polling for D7 */
|
|
while ((*dest & 0x0080) != (data & 0x0080)) {
|
|
if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
|
|
*dest = 0x00F0; /* reset bank */
|
|
return (1);
|
|
}
|
|
}
|
|
return (0);
|
|
}
|