smaeul-u-boot

mirror of https://github.com/smaeul/u-boot.git synced 2025-10-27 01:58:19 +00:00

History

Masahiro Yamada 1221ce459d treewide: replace #include <asm/errno.h> with <linux/errno.h>

Now, arch/${ARCH}/include/asm/errno.h and include/linux/errno.h have
the same content.  (both just wrap <asm-generic/errno.h>)

Replace all include directives for <asm/errno.h> with <linux/errno.h>.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
[trini: Fixup include/clk.]
Signed-off-by: Tom Rini <trini@konsulko.com>

2016-09-23 17:55:42 -04:00

Kconfig

mx6: remove SYS_SOC from board Kconfig

2015-09-13 10:37:29 +02:00

MAINTAINERS

MAINTAINERS/mailmap: Update my email address

2016-01-11 11:22:43 -05:00

Makefile

mx6: Add initial SPL support for HummingBoard-i2eX

2015-04-22 14:39:06 +02:00

mx6cuboxi.c

treewide: replace #include <asm/errno.h> with <linux/errno.h>

2016-09-23 17:55:42 -04:00

README

Use correct spelling of "U-Boot"

2016-02-06 12:00:59 +01:00

README

How to use U-Boot on Solid-run mx6 Hummingboard and Cubox-i
-----------------------------------------------------------

- Build U-Boot for Hummingboard/Cubox-i:

$ make mrproper
$ make mx6cuboxi_defconfig
$ make

This will generate the SPL image called SPL and the u-boot.img.

- Flash the SPL image into the SD card:

sudo dd if=SPL of=/dev/mmcblk0 bs=1k seek=1; sync

- Flash the u-boot.img image into the SD card:

sudo dd if=u-boot.img of=/dev/mmcblk0 bs=1k seek=69; sync

- Insert the SD card in the board, power it up and U-Boot messages should
come up.