mirror of
https://github.com/smaeul/u-boot.git
synced 2025-10-25 01:58:13 +01:00
1a4596601f
Signed-off-by: Wolfgang Denk <wd@denx.de> [trini: Fixup common/cmd_io.c] Signed-off-by: Tom Rini <trini@ti.com>
223 lines
8.5 KiB
C
223 lines
8.5 KiB
C
/* LEON2 header file. LEON2 is a SOC processor.
|
|
*
|
|
* (C) Copyright 2008
|
|
* Daniel Hellstrom, Gaisler Research, daniel@gaisler.com.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __LEON2_H__
|
|
#define __LEON2_H__
|
|
|
|
#ifdef CONFIG_LEON2
|
|
|
|
/* LEON 2 I/O register definitions */
|
|
#define LEON2_PREGS 0x80000000
|
|
#define LEON2_MCFG1 0x00
|
|
#define LEON2_MCFG2 0x04
|
|
#define LEON2_ECTRL 0x08
|
|
#define LEON2_FADDR 0x0C
|
|
#define LEON2_MSTAT 0x10
|
|
#define LEON2_CCTRL 0x14
|
|
#define LEON2_PWDOWN 0x18
|
|
#define LEON2_WPROT1 0x1C
|
|
#define LEON2_WPROT2 0x20
|
|
#define LEON2_LCONF 0x24
|
|
#define LEON2_TCNT0 0x40
|
|
#define LEON2_TRLD0 0x44
|
|
#define LEON2_TCTRL0 0x48
|
|
#define LEON2_TCNT1 0x50
|
|
#define LEON2_TRLD1 0x54
|
|
#define LEON2_TCTRL1 0x58
|
|
#define LEON2_SCNT 0x60
|
|
#define LEON2_SRLD 0x64
|
|
#define LEON2_UART0 0x70
|
|
#define LEON2_UDATA0 0x70
|
|
#define LEON2_USTAT0 0x74
|
|
#define LEON2_UCTRL0 0x78
|
|
#define LEON2_USCAL0 0x7C
|
|
#define LEON2_UART1 0x80
|
|
#define LEON2_UDATA1 0x80
|
|
#define LEON2_USTAT1 0x84
|
|
#define LEON2_UCTRL1 0x88
|
|
#define LEON2_USCAL1 0x8C
|
|
#define LEON2_IMASK 0x90
|
|
#define LEON2_IPEND 0x94
|
|
#define LEON2_IFORCE 0x98
|
|
#define LEON2_ICLEAR 0x9C
|
|
#define LEON2_IOREG 0xA0
|
|
#define LEON2_IODIR 0xA4
|
|
#define LEON2_IOICONF 0xA8
|
|
#define LEON2_IPEND2 0xB0
|
|
#define LEON2_IMASK2 0xB4
|
|
#define LEON2_ISTAT2 0xB8
|
|
#define LEON2_ICLEAR2 0xBC
|
|
|
|
#ifndef __ASSEMBLER__
|
|
/*
|
|
* Structure for LEON memory mapped registers.
|
|
*
|
|
* Source: Section 6.1 - On-chip registers
|
|
*
|
|
* NOTE: There is only one of these structures per CPU, its base address
|
|
* is 0x80000000, and the variable LEON_REG is placed there by the
|
|
* linkcmds file.
|
|
*/
|
|
typedef struct {
|
|
volatile unsigned int Memory_Config_1;
|
|
volatile unsigned int Memory_Config_2;
|
|
volatile unsigned int Edac_Control;
|
|
volatile unsigned int Failed_Address;
|
|
volatile unsigned int Memory_Status;
|
|
volatile unsigned int Cache_Control;
|
|
volatile unsigned int Power_Down;
|
|
volatile unsigned int Write_Protection_1;
|
|
volatile unsigned int Write_Protection_2;
|
|
volatile unsigned int Leon_Configuration;
|
|
volatile unsigned int dummy2;
|
|
volatile unsigned int dummy3;
|
|
volatile unsigned int dummy4;
|
|
volatile unsigned int dummy5;
|
|
volatile unsigned int dummy6;
|
|
volatile unsigned int dummy7;
|
|
volatile unsigned int Timer_Counter_1;
|
|
volatile unsigned int Timer_Reload_1;
|
|
volatile unsigned int Timer_Control_1;
|
|
volatile unsigned int Watchdog;
|
|
volatile unsigned int Timer_Counter_2;
|
|
volatile unsigned int Timer_Reload_2;
|
|
volatile unsigned int Timer_Control_2;
|
|
volatile unsigned int dummy8;
|
|
volatile unsigned int Scaler_Counter;
|
|
volatile unsigned int Scaler_Reload;
|
|
volatile unsigned int dummy9;
|
|
volatile unsigned int dummy10;
|
|
volatile unsigned int UART_Channel_1;
|
|
volatile unsigned int UART_Status_1;
|
|
volatile unsigned int UART_Control_1;
|
|
volatile unsigned int UART_Scaler_1;
|
|
volatile unsigned int UART_Channel_2;
|
|
volatile unsigned int UART_Status_2;
|
|
volatile unsigned int UART_Control_2;
|
|
volatile unsigned int UART_Scaler_2;
|
|
volatile unsigned int Interrupt_Mask;
|
|
volatile unsigned int Interrupt_Pending;
|
|
volatile unsigned int Interrupt_Force;
|
|
volatile unsigned int Interrupt_Clear;
|
|
volatile unsigned int PIO_Data;
|
|
volatile unsigned int PIO_Direction;
|
|
volatile unsigned int PIO_Interrupt;
|
|
} LEON2_regs;
|
|
|
|
typedef struct {
|
|
volatile unsigned int UART_Channel;
|
|
volatile unsigned int UART_Status;
|
|
volatile unsigned int UART_Control;
|
|
volatile unsigned int UART_Scaler;
|
|
} LEON2_Uart_regs;
|
|
|
|
#endif
|
|
|
|
/*
|
|
* The following constants are intended to be used ONLY in assembly
|
|
* language files.
|
|
*
|
|
* NOTE: The intended style of usage is to load the address of LEON REGS
|
|
* into a register and then use these as displacements from
|
|
* that register.
|
|
*/
|
|
#define LEON_REG_MEMCFG1_OFFSET 0x00
|
|
#define LEON_REG_MEMCFG2_OFFSET 0x04
|
|
#define LEON_REG_EDACCTRL_OFFSET 0x08
|
|
#define LEON_REG_FAILADDR_OFFSET 0x0C
|
|
#define LEON_REG_MEMSTATUS_OFFSET 0x10
|
|
#define LEON_REG_CACHECTRL_OFFSET 0x14
|
|
#define LEON_REG_POWERDOWN_OFFSET 0x18
|
|
#define LEON_REG_WRITEPROT1_OFFSET 0x1C
|
|
#define LEON_REG_WRITEPROT2_OFFSET 0x20
|
|
#define LEON_REG_LEONCONF_OFFSET 0x24
|
|
#define LEON_REG_UNIMPLEMENTED_2_OFFSET 0x28
|
|
#define LEON_REG_UNIMPLEMENTED_3_OFFSET 0x2C
|
|
#define LEON_REG_UNIMPLEMENTED_4_OFFSET 0x30
|
|
#define LEON_REG_UNIMPLEMENTED_5_OFFSET 0x34
|
|
#define LEON_REG_UNIMPLEMENTED_6_OFFSET 0x38
|
|
#define LEON_REG_UNIMPLEMENTED_7_OFFSET 0x3C
|
|
#define LEON_REG_TIMERCNT1_OFFSET 0x40
|
|
#define LEON_REG_TIMERLOAD1_OFFSET 0x44
|
|
#define LEON_REG_TIMERCTRL1_OFFSET 0x48
|
|
#define LEON_REG_WDOG_OFFSET 0x4C
|
|
#define LEON_REG_TIMERCNT2_OFFSET 0x50
|
|
#define LEON_REG_TIMERLOAD2_OFFSET 0x54
|
|
#define LEON_REG_TIMERCTRL2_OFFSET 0x58
|
|
#define LEON_REG_UNIMPLEMENTED_8_OFFSET 0x5C
|
|
#define LEON_REG_SCALERCNT_OFFSET 0x60
|
|
#define LEON_REG_SCALER_LOAD_OFFSET 0x64
|
|
#define LEON_REG_UNIMPLEMENTED_9_OFFSET 0x68
|
|
#define LEON_REG_UNIMPLEMENTED_10_OFFSET 0x6C
|
|
#define LEON_REG_UARTDATA1_OFFSET 0x70
|
|
#define LEON_REG_UARTSTATUS1_OFFSET 0x74
|
|
#define LEON_REG_UARTCTRL1_OFFSET 0x78
|
|
#define LEON_REG_UARTSCALER1_OFFSET 0x7C
|
|
#define LEON_REG_UARTDATA2_OFFSET 0x80
|
|
#define LEON_REG_UARTSTATUS2_OFFSET 0x84
|
|
#define LEON_REG_UARTCTRL2_OFFSET 0x88
|
|
#define LEON_REG_UARTSCALER2_OFFSET 0x8C
|
|
#define LEON_REG_IRQMASK_OFFSET 0x90
|
|
#define LEON_REG_IRQPEND_OFFSET 0x94
|
|
#define LEON_REG_IRQFORCE_OFFSET 0x98
|
|
#define LEON_REG_IRQCLEAR_OFFSET 0x9C
|
|
#define LEON_REG_PIODATA_OFFSET 0xA0
|
|
#define LEON_REG_PIODIR_OFFSET 0xA4
|
|
#define LEON_REG_PIOIRQ_OFFSET 0xA8
|
|
#define LEON_REG_SIM_RAM_SIZE_OFFSET 0xF4
|
|
#define LEON_REG_SIM_ROM_SIZE_OFFSET 0xF8
|
|
|
|
/*
|
|
* Interrupt Sources
|
|
*
|
|
* The interrupt source numbers directly map to the trap type and to
|
|
* the bits used in the Interrupt Clear, Interrupt Force, Interrupt Mask,
|
|
* and the Interrupt Pending Registers.
|
|
*/
|
|
#define LEON_INTERRUPT_CORRECTABLE_MEMORY_ERROR 1
|
|
#define LEON_INTERRUPT_UART_1_RX_TX 2
|
|
#define LEON_INTERRUPT_UART_0_RX_TX 3
|
|
#define LEON_INTERRUPT_EXTERNAL_0 4
|
|
#define LEON_INTERRUPT_EXTERNAL_1 5
|
|
#define LEON_INTERRUPT_EXTERNAL_2 6
|
|
#define LEON_INTERRUPT_EXTERNAL_3 7
|
|
#define LEON_INTERRUPT_TIMER1 8
|
|
#define LEON_INTERRUPT_TIMER2 9
|
|
#define LEON_INTERRUPT_EMPTY1 10
|
|
#define LEON_INTERRUPT_EMPTY2 11
|
|
#define LEON_INTERRUPT_OPEN_ETH 12
|
|
#define LEON_INTERRUPT_EMPTY4 13
|
|
#define LEON_INTERRUPT_EMPTY5 14
|
|
#define LEON_INTERRUPT_EMPTY6 15
|
|
|
|
/* Timer Bits */
|
|
#define LEON2_TIMER_CTRL_EN 0x1 /* Timer enable */
|
|
#define LEON2_TIMER_CTRL_RS 0x2 /* Timer reStart */
|
|
#define LEON2_TIMER_CTRL_LD 0x4 /* Timer reLoad */
|
|
#define LEON2_TIMER1_IRQNO 8 /* Timer 1 IRQ number */
|
|
#define LEON2_TIMER2_IRQNO 9 /* Timer 2 IRQ number */
|
|
#define LEON2_TIMER1_IE (1<<LEON2_TIMER1_IRQNO) /* Timer 1 interrupt enable */
|
|
#define LEON2_TIMER2_IE (1<<LEON2_TIMER2_IRQNO) /* Timer 2 interrupt enable */
|
|
|
|
/* UART bits */
|
|
#define LEON2_UART_CTRL_RE 1 /* UART Receiver enable */
|
|
#define LEON2_UART_CTRL_TE 2 /* UART Transmitter enable */
|
|
#define LEON2_UART_CTRL_RI 4 /* UART Receiver Interrupt enable */
|
|
#define LEON2_UART_CTRL_TI 8 /* UART Transmitter Interrupt enable */
|
|
#define LEON2_UART_CTRL_DBG (1<<11) /* Debug Bit used by GRMON */
|
|
|
|
#define LEON2_UART_STAT_DR 1 /* UART Data Ready */
|
|
#define LEON2_UART_STAT_TSE 2 /* UART Transmit Shift Reg empty */
|
|
#define LEON2_UART_STAT_THE 4 /* UART Transmit Hold Reg empty */
|
|
|
|
#else
|
|
#error Include LEON2 header file only if LEON2 processor
|
|
#endif
|
|
|
|
#endif
|